Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.0 LAccepted-Finance | ₹3.0 L | L1 | Accepted-Finance L1 Lowest Bidder |
| 2 | L2₹3.4 L+₹43,399.40 (14.5%)Accepted-Finance | ₹3.4 L+₹43,399.40 (14.5%) | L2 | Accepted-Finance L2 Bidder |
| 3 | Rejected-Technical | - | - | Rejected-Technical Technically Disqualified as per DTCN Clause 10(i) and Annexure-I of Schedule-C |
| 4 | Rejected-Technical | - | - | Rejected-Technical Technically Disqualified as per DTCN Clause 10(i) and Annexure-I of Schedule-C |
| 5 | Rejected-Technical | - | - | Rejected-Technical Technically Disqualified as per DTCN Clause 10(i) and Annexure-I of Schedule-C |
Tender Value
₹4.1 L
EMD Value
₹4,100
Closing Date
7 Aug 2026, 5:00 pmClosed
Divisional Officer
O/o Superintending Engineer, Phulbani (R and B) Division, Phulbani, Kandhamal, 762001
Repair and Renovation of GNM Hostel at Phulbani. (Part-1) Buildings.
2026_EICCL_136949_1
SERBPLB1-04-2026-2027
Open Tender
Civil Works - Buildings
Percentage
30 days
Kandhamala, Phulbani
2 documents required · 2 mandatory
₹2,000
₹4,100
21 Sept 2026
24 Jul 2026
10 Aug 2026
24 Jul 2026
7 Aug 2026
24 Jul 2026
24 Jul 2026 - 6 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing fitting and fixing up Partition walling aluminium anodised section No.9207 as single groove respectively as horizontal and vertical member and section 4660 tapered clip and joining angle No.1855 etc as oer direction of E.I.C excluding cost laminated board. | 279.09 | sqm | 646.27 | ₹1,80,367.49 |
| 2 | Providing fitting, fixing of ALUMINIUM Shutter with OLE anodized AL. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 6 mm black glass in top portion with 12mm thick pre-laminated board in bottom portion fixed on door frame by means of tapered clip No. 4660 and the farm to be complete by means of jointing angle No.1855 including all cost of labour, T&P hire charges of drilling machine, labour charges etc. complete including cost, conveyance, of all materials all labours T&P etc. | 110.78 | sqm | 578.32 | ₹64,066.29 |
| 3 | Supplying fiting,fixing 12mm thick pre-leminated board for partition walling including all cost of labour, T&P hire charges of drilling machine, labour charges etc. complete including cost, conveyance, royalties, of all materials all labours T&P etc. | 63.33 | sqm | 866.9 | ₹54,900.78 |
| 4 | Supplying fitting and fixing in position well dressed and well seasoned Sal wood work framed and fixed (wrought and put up) in burgahs, rafters and posts including cost of coal tar, cutting grooves and mending sizes where necessary with cost and conveyance royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors. | 0.05 | cum | 84,291.76 | ₹4,214.59 |
| 5 | Supplying, fitting, fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mmm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc completee. | 2.42 | sqm | 10,668.61 | ₹25,818.04 |
| 6 | Providing for fitting and fixing expanded metal or wiremesh sor window etc. including sal wood beading with cost of nails, screws, beads, etc. complete but excluding cost of expanded metl or wiremesh. | 17.45 | sqm | 345 | ₹6,020.25 |
| 7 | Finishing plastered surface with wall cement putty to receive primer etc including cost, conveyances, taxes of wall cement putty & all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. | 19.32 | sqm | 86.42 | ₹1,669.63 |
| 8 | Painting 2 (Two) coats with any approved Plastic Emulsion paint a over a coat of primer to wall surface after cleaning the surface including cost of P.E Paint Cost,Coneyance, of all materials and labour with T&P required for the work etc. comple te in all floors. | 339.66 | sqm | 187.4 | ₹63,652.28 |
| 9 | Painting two coats with any approved enamel paint ironwork including cost of enamel paint & Primer, sand papering polishing the surface with cost, Conveyance, of all materials and labour with T&P required for the work etc. complete in all respect. | 24.3 | sqm | 263.97 | ₹6,414.47 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
finance_603112.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_2.pdf
PDF • 0.76 MB
Tendernotice_1.pdf
PDF • 1.40 MB
BOQ_603112.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .