REPAIR TO STREETLIGHT AT 20 CAMP 19 CAMP AND 18 CAMP INCLUDING ALLIED WORKS UNDER GE RAMGARH CANTT

Amount

Taking down dismantling unserviceable Street light, Security light and flood light and Post top lantern fittings of any wattage or size from existing LT/HT electric pole or bldg for repair/replacement complete all as specified and as directed.

Taking down U/s Street/Security light timer of any type with its enclosure including steel brackets complete all as specified and directed.

M & L for LED street lights aesthetically designed roadway luminaries with excellent thermal management 40 watt IP- 66 of Make : Crompton CAT Part No. LSTS-40-CDL-M or equivalent in Bajaj/Syska/Havells/Surya including connecting in existing circuit with flexible wire 2 core 2.5sqmm copper conductor 1.5mtr long all as specified and directed.

M & L for LED street lights aesthetically designed roadway luminaries with excellent thermal management 45 watt IP- 66 of Make : Crompton CAT Part No. LSTS-45-CDL-M or equivalent in Bajaj/Syska/Havells/Surya including connecting in existing circuit with flexible wire 2 core 2.5sqmm copper conductor 1.5mtr long all as specified and directed.

M&L for LED street lights aesthetically designed roadway luminaries with excellent thermal management 60 watt IP- 66 of Make : Crompton CAT Part No. LSTP-60-CDL-M or equivalent in Bajaj/Syska/Havells/Surya including connecting in existing circuit with flexible wire 2 core 2.5sqmm copper conductor as required all as specified and directed.

M&L for LED street lights aesthetically designed roadway luminaries with excellent thermal management 72 watt IP- 66 of Make : Crompton CAT Part No. LSTP-72-CDL-M or equivalent in Bajaj/Syska/Havells/Surya including connecting in existing circuit with flexible wire 2 core 2.5sqmm copper conductor as required all as specified and directed.

S & F 40 mm dia bore galvalume iron pipe light grade, bent to shape of length, 1.50 mtr with flat iron clamp of size 50mm x 6 mm nuts and bolts of 12 mm dia 100 mm long including washer duly painted with two coats of synthetic enamel paint over a coat of red oxide primer on mild steel surface including preparation of surface on pole/wall, complete all as specified and as directed.

M & L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 m below ground level. Connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel, protected by GI pipe 15 mm bore (light grade) and watering pipe 20 mm bore GI pipe (light grade) and PCC of chamber and coping shall be 1:3:6, type C-1 using 20 mm graded stone aggregate including excavation and earth work and removal of surplus soil and filling with black cotton soil upto ground level, complete all as shown in electrical plate No. 3 of SSR P-I, 2009, with CI cover 20mm thick of size 300x300 mm with charcoal dust and common salt with alternative layer of 15cm complete and earth lead connected to panel/DB/LT poles board including testing complete all as specified and directed. Note: Earth test result should not less than 'One Ohm'.

Supply and laying or fixing or passing through pipe, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 4 sq. mm two core nominal cross section in stranded conductor including testing complete all as specified.

Supply and laying or fixing or passing through pipe, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm four core nominal cross section in stranded conductor including testing complete all as specified.

Excavation in trenches not exceeding 0.50 metre wide and not exceeding 0.45 metre in depth for cable trenches and getting out in soft / loose soil complete all as specified and as directed by the Engineer-in-Charge.

Returning, filling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and as directed by the Engineer-in-Charge.

Removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all as specified and as directed by the Engineer-in-Charge.

Material and labour for Supplying and laying reinforced pre cast concrete cable cover class LV, Type - 1 , flate, size 250 mm x 150 mm x 40 mm complete all as specified and as directed by the Engineer-in-Charge.

M & L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified. Note : The depth of sand shall be measured only after punning the sand)

Supply and laying GI pipe 50 mm dia light grade with all necessary fittings for cable protection complete all as specified and as directed.

M & L for painting three strip alternative layer width 20 mm with black, Yellow, Black of radium/photosinthetic paint on steel tubular poles etc after preparation of old surfaces above coping of pole complete all as specified and as directed.

M & L painting two coat of aluminum paint on steel tubular poles from GL to top , and l brackets, MS clamps, cross arms etc after preparation of old surfaces including numbering of poles, after painting complete all as specified and as directed.

S&F for flood light pressure Die Cast aluminium housing with toughened glass and high power LED's and secondary lenses with IP66 protection, efficient high output emitter LED 120 Watt 230 volt, 50 Hz. Make Crompton (Cat part No. LFLN-120-CDL/60M or equivalent in Bajaj/Syska/Havells/Surya including testing complete all as specified and as directed.

S & F for flood light pressure Die Cast aluminium housing with toughened glass and high power LED's and secondary lenses with IP66 protection, efficient high output emitter LED 80 Watt 230 volt, 50 Hz. Make Crompton (Cat part No.LFL-80-CDL/60 or equivalent in Bajaj/Syska/Havells/Surya including testing complete all as specified and as directed.

S & F Empty box IP-66 without mounting plate (with transparent lid) 168 x 253 x 115 mm complete of make Hensel cat part No. KG 9002 or equvalent in ABB/Emter complete with all fixing accessories including testing all as specified and as directed.

S & F of street light panel 6 KW load with digital 24 hr timer with contactor 32Amp/TP along with MCB SPN 40 Amp, complete all as specified and as directed Make :- Havells /L & T / HPL/Siemens/Indo Asian as approved by GE.

M&L for energy saver shock proof, cool day light LED 6500 K light fittings 22 watts, 230 V AC including connection in existing circuit and testing complete. Make PHILIPS Cat No. LED PL-L 4P22 or equivalent in Bajaj/Syska complete all as specified and directed.

M&L for energy saver shock proof, cool day light LED 6500 K light fittings 20 watts, 230 V AC including connection in existing circuit and testing complete. Make PHILIPS Cat No. LED PL-L 4P20 or equivalent in Bajaj/Syska complete all as specified and directed.

M & L for cable junction box of size 155 x 210 x 92, GFS polycarbonate, weather proof, UV resistant rainwater proof, halogen free glow wire test in accordance with IEC 60695-2-II 960 C flame retardant self extinguishing suitable for cable size upto 10 Sq mm IP 66, with terminal complete with all accessories. Make HENSEL Cat No. KF 1616G or equivalent in ABB/Emter complete all as specified and directed.

M & L for cable junction box GFS polycarbonate, weather proof, UV resistant rainwater proof, halogen free glow ire test in accordance with IEC60695-2-II 960C flame retardant self extuinguishing suitable for cable size upto 10 Sq mm IP 66 with terminal complete with all accessories. Make: HENSEL Cat No. MI0201G or equivalent in ABB/Emter, complete all as specified and as directed.

M & L for street circuit wiring alongwith earth wire of FR PVC insulated copper conductor of size 2 x 2.5 Sq mm x 1 x 1.5 Sq mm earth wire multi stranded cable in surface/recess in suitable size of PVC conduit including fixing accessories and testing, complete all as specified and as directed.

S & F Analog time switches (with battery backup) suitable for weekly programmable every 04 hours , with backup up to 100 hrs, current capacity 16 A with 1 changeover (1 CO),Make: Indoasian Model No. 3mod DIN weekly, Cat Part No. TA926129 or equivalent in Havells/L&T complete all as specified and as directed.

S & F Light sensitive switch with outer sensor, sensitive distance 50 m, current capacity 16 A & control from 1 lux to 100K lux of Make: Indoasian Model No. 1mod DIN Light Sensitive Cat Part No. TSA58107 or equivalent in Havels/L&T complete all as specified and as directed.

S & F LED garden lights 45W Model No. DRL45LEDNW of Make Bajaj, including electric connection complete, complete all as specified and as directed.

upadhyay engineers and consultant

M/s friend enterprises

M/S ROHIT CONSTUCTION

M/S Akash Enterprises

M/s Ray construction

M/S tiwari enterprises

M/S BIJAY KUMAR SINGH