MPLADS(Sri.Paka Venkata Satyanarayana Garu,Hon'ble MP(R.S))

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work but excluding VAT and seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308).

Filling with stonedust including cost and conveyance of allmaterials and labour chargesetc complete

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402) but excluding GST and Seigniorage charges

Supply and placing of the CC(1:2:;4) Grade Nominal Mix Concrete with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand(unscreened)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for foundations, Plinth beams, but excluding GST and Seigniorage charges

Supply and placing of the cc (1:2:;4) Grade Nominal Mix Concrete with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand(unscreened)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for foundations, Plinth beams, but excluding GST and Seigniorage charges

Supply and placing of the cc (1:2:;4) Grade Nominal Mix Concrete with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand(unscreened)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for foundations, Plinth beams, but excluding GST and Seigniorage charges

Construction of granular sub-base by providing well graded HBG material (Grading III material) (Table 400.2) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller / vibratory rooler of 80-100 kN to achieve the desired density, complete as per Technical Specification Clause 401 MORD including cost of all materials, labour, conveyance, hire charges of machinary, royalties, all taxes etc complete as per direction of Engineer in charge

Construction of un-reinforced, jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement for mix of VCC (1:2:4) equivalent to M30 mix, coarse and fine agregates conforming to IS:383 maximum size of coarse agregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2cum capacity and using approved mix design, laid in approved fixed side form work (steel channel) , wedges, steel plates including levelling the form work as per drawing, spreading the concrete with shovels, rakes, compacted using plate vibrators and finished in continuous operation including provision of contraction joints using Mastic pad, admixtures as approved, curing of concrete slabs for 14 days, and water finishing to lines and grade as per drawing and technical specification clause 1501.22 (without dowel bars) Excluding cost of materials

Fixing of Channels levelling the concrete with Beam vibrator vacume dewatering power trowelling to finish as per the direction of Engineering Incharge rate inclusive of labour charges all complete for finished item of work.

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work (APSS No.126) in all floors. excluding VAT ans Seigniorage charges