14 /EE/PMD/PHED OF 2024-2025/Sl2

Amount

Supply and delivery of Submersible pumping machinery directly coupled with water proof suitable size motor having following specification: Pump- DISCHARGE-2 m3/hr HEAD:- 101 mtr. SHAFT: S.S/MS IMPELLER:- G.M./Bronze/S.S/Chrom Steel./Noryl OUTLET SIZE: 25mm/32mm/50mm PUMP EFFICIENCY IN PERCENTAGE:- Minimum 60% MOTOR- Submersible type, 3 ph.,50 Hz.,415V,.± 10%/ Volts, RPM-2900 with wet type winding ( Not less than 1.5 H.P), Make : PHED Approved Make) N.B:- (A) H/Q charateristic curve chart of pump set should be submitted before delivery. (B) Test certificate of pump & motor should be submitted during delivery.

Supply & delivery of DOL starter for 1.5 HP Submersible pump motor with digital multi functional meter, Push button switch,on/off indicater lamp with protections- over load relay,suitable for three phase 415 V supply, with IP54 ;Relay range (9 - 14 Amp) Make:- PHED Approved Make

Supply and delivery of 1.1 KV grade XLPE insulated 10 sq,mm x 3 core Alumium Armoured cable as per IS: 7098 ( Part -1 )2011 Make: PHED approved make.

a) Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

b) Laying of cable by sand cutting and filling after laying and binding of cable with 12 SWG gi wire with collecting line and connection complete as per requirement.

Supply and delivery of 2.5 sq.mm. 3 core, 1.1 KV grade, PVC insulated, water proof flat Submersible cable. (Make:- PHED Approved Make). (As per site requirement)

Supply and delivery of 32 mm. dia. UPVC column pipe with suitable thread on both side and pvc socket at one end with following dimension. 3 mtrs long

Supply and delivery of adapter C.I. adapter (top)

C.I.adapter (bottom)

Supply and delivery of Heavy type suitable dia.M.S.suspension clamp along with nuts,bolts,washer etc.

Supply , delivery and fitting of gunmetal wheel valve of approved make and brand tested to 21 kg per sq cm-1 no. and GM check valve (horizontal) tested to 21 kg/sq. cm., 1 no. CIDF 90 Bend, 1 No. TEE, Blank Flange-1 no., CI/MS flanged short piece 0.50 mtr-1 no., CI/MS flanged pipe 1 mtr-1 no.GI elbow-1 no. , short pices-3 nos., etc as per requirement at site to complete the work as per direction of EIC. Make: Any approved make from WBPHED unified vendor list.

Split type M.S.fabricated suitable size tubewell cover having thickness 6 mm. for housing pipe with necessary fastening arrangement alongwith provision of colomn pipe, air pipe, cable entry gland etc for 200 mm dia housing pipe.

Installation of above supplied Pumping Machinery along with coloum pipes, submerssible cable etc.including supply safety device & reducer ( 12mm rope 120 Mts.) for pump. This cost includes the cost of interconnection of submerssible cable with starter through conduit pipes as required and also concealed manner in the floor and ground including cutting & mending damages of floor as required, as per direction. ( This cost includes arrangement of derrick and drawing of cable and supplying of lifting tools & accessories.)

Supplying, fitting and fixing UPVC pipes for underground work of approved make of Schedule 40 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories,specials.) 20 mm dia.

Making suitable size tubewell foundation 1m x 1 m x 0.75m with supplying of necessary cement brick, sand and stone chips including plastering and neat cement finish complete masonary works and hinge MS fabricated top gate with locking arrangement as per direction of EIC.

Supply and delivery of Submersible pumping machinery directly coupled with water proof suitable size motor having following specification: Pump- DISCHARGE-27 m3/hr HEAD:- 34 mtr. SHAFT: S.S/MS IMPELLER:- G.M./Bronze/S.S/Chrom Steel./Noryl OUTLET SIZE: 25mm/32mm/50mm PUMP EFFICIENCY IN PERCENTAGE:- Minimum 60% MOTOR- Submersible type, 3 ph.,50 Hz.,415V,.± 10%/ Volts, RPM-2900 with wet type winding ( Not less than 5 H.P), Make : PHED Approved Make) N.B:- (A) H/Q charateristic curve chart of pump set should be submitted before delivery. (B) Test certificate of pump & motor should be submitted during delivery.

Withdrawing of existing low capacity (2 HP/3 HP) submersible pump motor set along with column pipe by necy. arrangement & skilled labour after disconnection the same.

Lowering of submersible pump motor set in tube well by making proper arrangement, connecting of cable properly and testing all complete in all respect.

Supply of E.R.W.M.S.(Electrical Resistant Welded M.S.) black pipe of TATA make (heavy quality) as per standard specification, 5 mm thick (a) 100 mm dia

(b) 150 mm dia

Supply and delivery of following size MS dismantling joints PN 1.6 ratings with Rubber Compression Ring and adjustable follower flanged complete assembled unit with galvanized stud and nuts. (a) 100 mm dia

(b) 150 mm dia

Supply delivery of following size Non-Rising Spindle sluice valves with PN 1.6 delivery side as per IS 14846 spindle of IS 6603, gr12 cr13 (Make: PHED Approved Make) (a) 100 mm dia

(b) 150 mm dia

Supply delivery of 100mm dia CIDF swing check type NRV PN- 1.6 IS: 5312 (Part- 1) (Make-PHED Approved Make)

Supply delivery of 40mm dia PVC Ball Valve

Supply delivery of 40mm dia G.I. Elbow

Supply delivery of following size G.I. Nipple (a) 40mm dia 225mm long

Supply delivery of 40mm dia G.I. Socket

Supply delivery of 40mm dia P.V.C Socket

Supply delivery of 40mm dia P.V.C Elbow

Supply delivery of following size MTA (a) 40mm dia

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.( a) In ground floor including roof.

Plaster(to wall floor ceiling etc) with sand and cement mortar including rounding off as chamfering corners directed and racking out joints including threading noising and drip course scraping staging where necessary with 1:4 cement mortar 20 mm thick plaste

Fitting fixing and instalation of above supplied item (sl. no. 17 to 27) at suitable places as per requirement by supplying of all necessery materials and necessery fabrication(PVC pipe, nut bolt washer etc) all complete in all respect.

Add GST @ 18%

Add CESS @ 1%

M/s. SOMA ENTERPRISE (BID ID -5956415)

SUNRISE ENGINEERING CORPORATION (BID ID -5956406)