8575/E8

Amount

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors and aprons etc. laid, bedded and pointed in any mortar all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) 25 mm thick in flooring finished even & smooth without using extra cement all as specifed and directed.

M&L non skid joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exc. 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 laying floor finishes all as specified and directed.

M&L for non skid joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc. 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and removing serviceable tiles to store and rubbish off the premises.

M&L for light shade vitrified ceramic tiles 10 mm thick(square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes all as specified and directed.

S&F glazed ceramic tiles coloured 350x250mm/450 x 350mmx 8 to 10 mm thick on wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match and fixed over rendering 10 mm thick in CM 1:6 on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfaces all as specified and directed.

M&L 75 mm thick in sub base PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate), finished surfaces even & fair all as specifed and directed.

M&L prepolished chequered cement concrete tiles 25cmx25cm/30cmx30cm of 25mm thick, with grey cement and no pigment, set, jointed and pointed in neat cement slurry in floors and laid over including 20 mm thick screed bed or bedding of CM 1:6 all as specified and directed

M&L granite (of any type) work (table moulded, rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 18 to 20 mm thick laid over 15 mm thick screed bed in CM 1:6 all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) 40 mm thick in flooring, finished surfaces even & smooth with using extra cement all as specifed and directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in surface channel and drain all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection all as specified and directed.

M&L glass dividing strip 3 mm thick , 38 mm wide all as specified and directed.

M&L for precast cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate as in solid building blocks, exc. 10cm in width and setting in CM (1:4) all as specified and directed.

All as per item No. 20 here in before above but except block

M&L rendering 15 mm thick in CM 1:4 on brick or concrete surfaces finished surfaces even and smooth without using extra cement all as specified and directed.

Supply only integral water proofing compound @3% by weight of cement or as per manufacturers instructions all as specified and directed.

Extra for forming fair finished drain and channel 30 cm inner grith on cement concrete surfaces using extra cement in forms mould mitred/stopped ends all as specified and directed.

M&L PCC 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) as in landing, cover slab to manholes, chullah hoods, chajjas, shelves, and similar articles with plain faces all as specified and directed.

M&L TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required including crancking bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9 mm dia securing with clips in quality all as specified & directed.

M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in coping including form work all as specified and directed.

M&L walling of random rubble stone masonry uncoursed well bonded, bedded and solidly hearted built in CM 1:6 all as specified and directed.

All as per item No. 28 above but except stone

M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in bonders (for stone walling) set in CM 1:6 all as specified all as specified and directed

S&F 75 mm dia PVC (SWR) pipes, single socketed fixed in walls or laid in floors or trenches of retaining wall all as specified and directed.

Raking out joints/pointing to random rubble or polygonal rubble masonry uncoursed or brought up to courses in cement mortar all as specified and directed.

M&L raised pointing to randam or polygonal rubble uncoursed or brought upto courses in CM 1:4 all as specified and directed.

M&L hand packing with broken stone or boulders (any thickness) at back of walls over arches and raising (or lowering) to the required level all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, to random rubble walling, uncoursed or brought upto courses all as specified with maximum depression on face 40 mm for lime/sand stone all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipe single cocketed any length with rubber ring joints laid in trenches with fittings and fixtures all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110mm bore pipe all as specified and directed.

All as per item No. 37 here in before but 75 mm bore.

M&L 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

S&F PVC (SWR) 'P' trap bore 125/110 mm all as specified and directed.

S&F PVC (SWR) 'S' trap bore 125/110 mm all as specified and directed.

Supply and fix in repair vitreous china urinal, bowl type, flat back, size 465 x 355 x 265mm (minimum), white, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement, with grating and union for discharge pipe and PVC waste pipe, including making all connections to existing connections all as specified and as directed.

All as per item No 44 above but half stall type all as specified and directed.

S&F in repair vitreous china wash hand basin (550x400 mm) white flat back excluding taps, waste chain and plug and porcelain stopper but including brackets all as specified and directed.

S&F in repair 32 mm dia bore waste fittings brass chromium plated for glazed ware sink, basin etc with long screwed shank and fly nut, flange and bedded in red lead cement and other end fixed including waste pipe of required length all as specified and directed.

S&F in repair pillar tap cast copper alloy with capstan head, fancy type chromium plated screwed down high pressure with or without lettered 'Hot or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed all as specified and directed.

S&F in repair flush pipe of polythene of low or high density or PVC, 32 mm dia for low level cistern all as specified and directed.

Supply and fix in repair for PVC(LDPE), 32 mm dia, polythelene, of pressure rating 6 kgf/sqcm, fixed to wall, ceiling or in floor, for wash hand basin including taking down of existing old pipe all as specified and directed.

S&F in repairing flushing cistern low level, PVC 10 Litres capacity syphonic action type valve, valve less with inlet, ball valve, float and handle including bracket all as specified and directed.

Supply and fix in repair stainless steel sink with drainage board made of 1.00 mm thick steel body, overall size 915mm x 460mm,bowl size 410mm x 330mm x 160mm, kitchen or laboratory with plugs, washers waste pipes, including bedding in cement mortar on to dwarf wall or including fixing on cast iron cantilever brackets and connecting union to pipe etc. and making connections to all existing connections with draining board all as specified and as directed.

S&F in repair PVC connection 15 mm dia and 450 mm long all as specified and directed.

Supply and fix in repair for 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms) all as specified and directed.

Supply and fix in repair 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (Minimum weight 210 gms) all as specified and directed.

S&F in repair 15 mm dia CP jet with CP flexible pipe 90 cm long including necessary fittings all as specified and directed.

S&F in repair health faucet all as specified and directed

S&F in repair soap dish acrylic type all as specified and directed.

S&F in repair CP grating of size 100 mm dia all as specified and directed.

S&F in repair CP grating of size 100 mm dia with waste hole all as specified and as directed

Supply and fix in repair towel rail, brass chromium plated, 20 mm dia D type, 600 mm long between flanges all as specified and as directed

Supply and fix in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with mild steel chromium plated bracket guard and railing 60cm long all as specified and as directed.

Supply and fix in repair gun metal gate valve,15mm bore, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and as directed.

All as per item no. 64 above but 20 mm bore all as specified and directed

Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store all as specified and directed.

All as per item no. 66 above but 20 mm bore all as specified and directed.

S&F 15 mm bore GI tubing medium grade with all fittings and fixtures fixed to wall or laid in floor all as specified and directed

All as per item no. 68 above but 20 mm bore all as specified and directed.

Re-fixing 15 mm bore old steel tubing and connection in new or old positionwith all fittings and fixtures to wall, ceiling, floors etc. all as specified and directed

Dismantling of water tank and removing to store capacity exc 250 litre but not exc 500 litres all as specified and directed

Dismantling of water tank and removing to store capacity exc 500 litre but not exc 1000 litres all as specified and directed

Supply and fix rotational moulded polyetylene water storage tanks ISI marked of 500 litres capacity (cylindrical vertical with closed top) with HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule hoisted and fixed in position all as specified in SSR Part-I, all as specified and as directed.

Supply and fix rotational moulded polyetylene water storage tanks ISI marked of 1000 litre capacity (cylindrical vertical with closed top) with HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule hoisted and fixed in position all as specified in SSR Part-I, all as specified and as directed.

S&F in repair brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed

S&F in repair CP telephonoic shower rose all as specified and directed

S&F in repir PVC over head tank cover for 500 litres capacity tank all as specified and directed.

Dismantling 100 mm dia CI pipes, jointed in cement mortar and taking out of trenches if required all as specified and directed.

M&L 100 mm dia CI pipe (sand cast) soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors all as specified and directed.

Supply and fix in repair for PVC (SWR) vent cowl of 75mm bore all as specified and as directed.

S&F in repairs 15mm dia stop valves/angle valve cast copper alloy, chromium plated, fancy type screwed down high pressure, with crutch or butterfly handle screwed with both ends for iron pipe or for union all as specified and directed.

S&F in repairs 15mm dia Bib taps, cast copper alloy, chromium plated fancy type, screwed down high pressure, with crutch or butterfly handle screwed with both ends for iron pipe or for brass ferrules and all as specified and directed.

S&F in repairs 15mm dia Bib taps, cast copper alloy, chromium plated, screwed down high pressure, with crutch or butterfly handle screwed with both ends for iron pipe or for brass ferrules all as specified and directed.

S&F in repairs 15mm bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed (minimum weight 15mm-90gms)and complete all as specified and directed.

S&F in repair brass CP mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe or any type of pipe and fixed in position and making good disturbed portion all as specified and directed.

S&F in repair PVC water closet seat cover, black or white, closed pattern, with flat bottom and cover and mild steel chromium plated or aluminised hinging device, all as specified and as directed

S&F in repair stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms)all as specified and as directed.

S&F in repair cast copper alloy chromium plated central hole basin mixer, fancy type with long spout quarter turn operated type with 02 Nos PVC connections of best quality all as specified and as directed.

Cleaning, removing all scales, dust, dirt with wire/jute brush from inside of RCC/PVC tanks of capacity exc. 250 litres and not exc. 500 litres and from mouth of connected pipes all as specified and as directed.

All as per item No 89 above but exc 500 litre and not exc 1000 litre all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal all as specified and as directed.

Supply and fix in repair for fancy type pillar tap,15mm bore, of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-120gms) all as specified and as directed

Supply and fix in repair for toilet paper holder, brass chromium plated, fixed to wall with chromium plated brass screws all as specified and as directed

S&F for brass chromium plated urinal spreader fancy type all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) area exc 1.5 Sqm each but not exc 4 sqm all as specified and as directed.

All as per item No 95 above but area not exc.1.5 Sqm each all as specified and directed.

M&L for IInd class hard- wood plain, solid, straight chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

M&L 30 mm thick flush shutter solid core construction with particle board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F second class hardwood, glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive, glass, etc. with sash bar, divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass or gauze, etc. sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) fitted to chowkats all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick, plain colour PVC sheet, reinforced with MS Square tube all as specified and directed.

S&F factory made solid panel PVC door shutter, 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' chanel on both sides having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on both sides and as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as per specification & drawing all as specified and as directed.

S&F butt hinges medium weight, cold rolled, mild steel 75 mm all as specified and directed.

All as per item no. 102 above but 100 mm all as specified and directed.

S&F in repair butt hinges medium weight cold rolled mild steel of size 100 mm all as specified and directed.

S&F aluminium anodised barrel tower bolt, of extruded section and fixed of 150 mm long all as specified and directed.

S&F in repair mild steel barrel tower bolt stove enameled black with bright bolt and fixed of 150 mm long all as specified and directed.

S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and directed.

S&F in repair 250 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and directed.

S&F extruded aluminium alloy handles fabricated type, anodised 150 mm long all as specified and directed

S&F in repair for extruded aluminium alloy handles fabricated type, anodised 150 mm long all as specified and directed

S&F in repair 300 mm ordinary mild steel rat tail rod pattern springs, including roller and roller plate all as specified and directed.

S&F in repair peg set of six hooks of brass chromium plated all as specified and directed

S&F in repair door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, 150 mm with rubber shoe and fixed in floor all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty all as specified and as directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, 150 mm with rubber shoe and fixed in floor all as specified and directed.

S&F in repair 20 mm chromium plated pipes for curtain rod all as specified and directed.

S&F in repair chromium plated bracket and knobs fo curtain rod all as specified and directed.

S&F 0.56mm nominal dia wire galvanised mild steel wire cloth with average width of aperature 1.18mm and fixed with tinned tacks or galvanised wire staple all as specified and directed.

S&F in repairs 0.56mm nominal dia wire galvanised mild steel wire cloth with average width of aperature 1.18mm and fixed with tinned tacks or galvanised wire staple all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips and providing and fixing new ones all as specified and directed

S&F for 3mm thick sheet glass,ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane all as specified and as directed.

S&F powder coated aluminium frame for door, window, ventillators, partition wall, shutters including style & rails with standard anodized aluminium section with one or more rebates, including aluminium snap beading all as specified and directed.

M&L for rubber beading for fixing glass panes in aluminium frame work all as specified and directed.

S&F prelaminated particle board, 12 mm thick, exterior grade, both side with decorative choice lamination ,fixed with screws fixed to aluminium frame work all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge thickness including nainital and similar pattern all as specified and directed.

S&F 0.63mm thick galvanised mild steel sheet with grade of zinc coating 275 with two corrugation side lap fixed with L or J type or cranked hook bolts in roof/ wall all as specified and directed.

All as per item No.128 here in before but except sheet all as specified and directed.

S&F 0.63mm thick plain,galvanised mild steel corrugated sheeting in ridges,hips, valley gutters drips and straight flashings all as specified with grade of zinc coating 275 all as specified and directed

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of pink primer all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description exc 10cm width or girth and applying two coat of 1st quality synthetic enamel paint all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description exc 10cm width or girth and applying two coats of 1st quality synthetic enamel paint all as specified and as directed.

M&L for preparation of new steel surfaces of any description exc 10cm width or girth and applying two coat of 1st quality synthetic enamel paint over a coat of primer all as specified and as directed.

M&L for preparation of new surfaces of wall of any description and applying three coats of white wash all as specified and as directed.

Dismantling of ceiling board (fibre, pulp, insulation etc) any thickness including cover fillets all as specified and directed.

M&L everest designer false suspended false ceiling using GI exposed ceiling suspension system of grid size 600mmx600mm with main runner 38mmx24mm, cross tee 29mmx24mm & wall angle 24mmx24mm by using 4mm thick (High pressuresteam cured), pre-painted self embossed, reinforced designer cement board, conforming to IS 14862:2000, to be placed in a grid of G.I. system duly suspended with 4mm dia G.I./M.S. bar hanger fixed with steel dash fastner or iron purlins from the roof with adjustment clip providing position for light fixture all as specified and directed.

S&F powder coated aluminium anodised window and ventilator shutters, fixed type without sach bars, aluminium section weighing 0.55 kg/RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws all as specified and directed.

M/S Swarn Constructions

SIDHARTH CONSTRUCTION

Harendra Singh Panwar