ED/IIMC/NIT/1/26-27/41

Supply and Laying of PVC insulated 3.5C x 300 sq.mm (XLPE) armoured, Cable.1.1Kv grade Laying of the cable will be minimum 600 mm below from the G.L and protection of the cable with sand and bricks etc.( work includes necessary road cutting and back filling as per site requirement). Makes : KEI/ POLYCAB/ FINOLEX ( only 1 No. cable laying in one route)

Supply and Laying of PVC insulated 3.5C x 300 sq.mm (XLPE) armoured, Cable.1.1Kv grade Laying of the cable will be minimum 600 mm below from the G.L and protection of the cable with sand and bricks etc.( work includes necessary road cutting and back filling as per site requirement). Makes : KEI/ POLYCAB/ FINOLEX ( 3/4 Nos. cable laying in one route)

Supply and Laying of PVC insulated 3.5C x 300 sq.mm (XLPE) armoured, Cable.1.1Kv grade Laying of the cable will be minimum 600 mm below from the G.L and protection of the cable with sand and bricks etc.( work includes necessary road cutting and back filling as per site requirement). Makes : KEI/ POLYCAB/ FINOLEX ( 2/3 Nos. cable laying in one route)

Supply and Laying of PVC insulated 3.5C x 300 sq.mm (XLPE) armoured, Cable.1.1Kv grade . Cable laying in the existing cable trench or Hume pipe etc.Makes : KEI/ POLYCAB/ FINOLEX

Supply & installation State through joint of 3.5C X 400/300 sq mm (XLPE) cable including Jointing Kit ( Compound) make-3M and AL lugs, socket etc.

End Termination of 3.5C X 400/300 sq mm (XLPE) cable including Gland ( Double) make-comet and AL lugs, socket etc.

Supply , Installation , Testing & Commissioning of weather proof outdoor type Feeder pillar Aluminium painted made of 12 SWG MS powder coated with 2 nos. hinge type biparting door (at front and back side of feeder) The feeder pillar with dimension (Height – 1500 mm x W – 1250 mm x D – 800 mm) should consist of the following :- Fuse make- L&T/Havels/Siemens/Legrand. a) Bakelite sheet,20-25 mm thickness in adequate size = 1 set b) 50 mm x 6 mm, 500 A copper bus bar = 06 nos. c) 40 mm x 3 mm, 300 A copper bus bar = 02 nos. d) Porcelain fuse 200A ( KKRT) = 12 nos & Porcelant fuse 100A =6 nos e) Porcelain fuse 320A ( KKRT) = 06 nos f) Iron angle frame with 6 nos. leg = 1 set. g) 40 mm x 6 mm copper busbar link for porcelain fuse h) Fabrication & painting of the feeder Pillar. i) Danger plate & name plate & suitable base plate. j) Phase Indicating lamp LED both In side . Installation of above feeder box with proper brick foundation & brick soiling from front side as well as back side of the feeder box and completely plastering. Job also includes making 2 nos. platform of PCC with brick flat soling each of area 450 mm x 1300 mm on both sides of the feeder piller (front & back side)

Earthing with GI earth pipe 4.5 Mtr. Long 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and etc. with charcol/coke and salt as required. Including Earthing Strip 50X6 as required.

Any miscellaneous work not covered in present schedule but is required to be done on a as and when basis will be executed by the contractor. Work value will be ascertained based on rate analysis / original bill submission. 10% profit will be paid on original bil value submitted. The work will be done as per direction of Engineer- In- Charge.