Special Repair to bldg No NP-138 and Provn of Trolley for mounting of 125 and 500 KVA DG Sets at Nimu under AGE (I) NIMU

Amount

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).

M & L 25mm thk PCC M-15 type B-0 as in sub base to receive floor finishes.

S&F Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding layer in CM 1:6.

M&L Vetrified Ceramic Tiles 10mm thick (Square/rectangular) polished, area of each tile not exc 0.36 Sqm in floors etc.set and jointed in neat cement slurry and pointed in white or colour cement to match incl 15mm thick screed bed in CM 1:4 over top layer complete all as specified.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish of the premises.

M&L glazed Ceramic Coloured tiles 300x200x6 mm thick on vertical surfaces of wall over 10 mm thick screed bed in cm 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets.

Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in unframed work.

S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work.

M&L for 9mm prelaminated particle board, interer grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work complete all as specified.

M&L for 6mm Thick Ply wood 5 Nos of ply, grade BWR, Type BB , fixed with nails to timber frame work in ceiling, complete all as specified.

Applying two coats of synthetic enamel painting to new surfaces wooden based over a coat of pink primer exc. 10 cm width/girth including preparation of surfaces including filling with filler where reqd all as specified and directed.

M & L Plain fillets. exc. 13 & n.exc 25 Sq cm as in square, rectangular or triangular in section, clean sawn, secured with nails or brads.

Ditto item No. 13 above but exc 3 & n.exc 6 Sq cm in bullnosed, splayed, chamfered or rounded on one edge or face as in bedding.

Demolition of brickwork or stone/boulder masonry, built in cement mortor including all quins, arches pillars, etc, but excluding ashlar facings dressed stonework and precast concrete articles.

M&L for Pre-cast cement concrete block masonry type C-1 1:3:6 (using 20 mm grades crushed stone aggregates) with solid blocks, exc. 10 cm in width and set in mortar 1:6 complete.

Rendering 15mm thick on fair faces of brick work or concrete surfaces finished even or smooth (without using extra cement) in CM 1:4.

M&L for Rendering 10mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement.

M & L preparation of new plastered surfaces and applying three coats of white wash on walls.

M&L for preparing surface plastered or unplastered and applying two coats of cement base paint.

Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sqm each (without taking off shutters from the frames).

Taking down Chowkhats or frames not exc. 1.5 sqm each with shutters (without taking off shutters from the frames).

S&F 2nd class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

M&L 2nd class Hardwood 35mm thick Plain, framed, panelled shutters (any number of panels), of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats.

M&L 30mm 2nd class Hardwood (Kail) Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of mebers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

M&L 3mm thick plain Sheet glass, ordinary quality and glazing with oil putty or wooden beads in square n. exc 0.5 sqm in each pane.

M&L for 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.

S&F Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long (ISI marked), complete all as specified.

S&F Aluminium anodised, barrel tower bolt of extruded section and fixed, 100mm long (ISI marked), complete all as specified.

S&F Butt hinges, medium weight, cold rolled, mild steel 100mm long (ISI marked), complete all as specified.

S&F Butt hinges, medium weight, cold rolled, mild steel 75mm long (ISI marked), complete all as specified.

S&F Extruded aluminium alloy handle, fabricated type 'D', anodised, 150mm long (ISI marked), complete all as specified.

S&F Extruded aluminium alloy handle, fabricated type 'D', anodised, 100mm long (ISI marked), complete all as specified.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, roof coverings & wall.

S&F Pre-painted galvanume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F Pre-painted galvanume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F Roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beams, tee, angle, channel or flat sections) including distance piece, cleats etc. conforming to Fe 410 W (Gde- E- 250) quality A.

Applying one coat of synthetic enamel paint to old decorated steel surfaces based exc. 10 cm width/girth including preparation of surfaces including filling with filler where reqd all as specified and directed.

Applying two coats of synthetic enamel paint to new steel surfaces based exc. 10 cm width/girth over one coat of Red oxide primer including preparation of surfaces including filling with filler where reqd all as specified and directed.

Applying two coats of synthetic enamel paint to new surfaces wooden based over a coat of pink primer exc. 10 cm width/girth including preparation of surfaces including filling with filler where reqd all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.

M&L for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded crushed stone aggregate) for as in plinth protection.

Taking up/down old GI tubing on walls and connection of size 10/20mm bore complete all as specified and as directed. Note :- Taking down stop cock, bib taps and concealed tubing shall be measured & Paid separately.

S&F GI Tubing medium grade with all fitting fixed to wall/ Ceiling or laid on floor complete of size 15mm bore all as specified and as directed.

S&F GI Tubing medium grade with all fitting fixed to wall/Ceiling or laid on floor complete of size 20mm bore all as specified and as directed.

S&F in repair type bib taps cast copper alloy with crutch or butter flyhandle, screwed down, screwed for iron pipe of bore 15mm complete.

S&F PVC connection 15mm size with PTMT nuts of length 300mm.

S&F in repairs Vitreous china white soap dish/tray (approx 160 x 160 x 90mm) embedded in the wall complete all as specified.

S&F Rotational moulded polyethylene water storage tanks 500 ltrs three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including taking down old.

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, including taking down old.

Taking down carefully aluminium point wiring light, fan socket or power complete fitting such as switches, ceiling rose, fan regulator, socket including light fitting etc complete with MS conduit and T/W battern and depositing to MES store yard all as specified and as directed by Engineer-in-Charge.

M&L for point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc all as directed for One light point controlled by one switch

One 3 pin 5 amps socket outlet independent with cables 1.5 sqmm size.

One 3 pin 5 Amp socket outlet on same board.

All same as per item No 54 above but with conductor of size 2.5 sqmm (Nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 2.5 sqmm PVC insulated stranded copper conductor Cable.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and directed.

S&F socket 2 in 1, 5 pin 5 Amp flush type complete all as specified.

S&F switch piano flush type 5 Amp, single pole, one way complete all as specified and directed.

S & F Switch piano, flush type single pole, one way 15 Amp.

M&L for ceiling rose surface Bakelite 65x50mm two to three terminal complete all as specified and as directed by Engr-in-Charge.

S&F Decorative ultra slim aluminium LED lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack integreted electronic driver of cap 20/22 watt, 4 feet long, with all accessories complete all as per specified and as directed by Engr-in-Charge, including taking down old.

S&F LED Bulkhead designed for modern homes available in non PIR as well as PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installerof cap 13.5 watt complete all as specified and directed as Engr-in-Charge, including taking down old.

S&F Exhaust fan 300mm sweep durable plastic body complete with lovour all as specified and directed.

S&F Sheet metal powder coated versatile double door SPN distribution board, 12 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link, earth bar and din rail suitable for use on 240 Volt, 50Hz, including taking down old.

M&L for MCB SPN 63 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed including taking down old.

S&F MCB SP 6-32 Amp with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed, including taking down old.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminimum conductor of size 16 Sqmm twin core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, flat or circular all as specified and directed, including taking down old.

Replacement of Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated. including testing on completion necessary excavation and earth work in any type of soil including testing on completion for desired result all as specified.

Supply mobile trolly of floor area 6.50 mtr x 2.3 mtr x 2.60 carrying capacity upto 10 ton madeout of suitable size of MS frame work supported mounted on leaf spring and four wheels with tubless tyre size 10.00-20x16PR (Truck tyre complete with stepney), heavy duty with towing hook and other necessary arrangements, for mounting 500 KVA capacity generator set, Complete all as specified and directed. Note:- Incl fixing Gen Set on trolley with the help of suitable T&P at Nimu complete all as specified and directed.

Supply mobile trolly of floor area 3.5 mtr x 1.5 mtr x 1.80 carrying capacity upto 5 ton madeout of suitable size of MS frame work supported mounted on leaf spring and four wheels with tubless tyre size 7.50 x 16, heavy duty with towing hook and other necessary arrangements, for mounting 125 KVA capacity generator set. Complete all as specified and directed. Note:- Incl fixing Gen Set on trolley with the help of suitable T&P at Nimu complete all as specified and directed.

SASPOL LARJAY CONSTRUCTION

MS INFRATECH