Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.7 LAccepted-AOC | 1 | Accepted-AOC 1 | |
| 2 | 2₹5.3 L+₹52,800.56 (11.1%)Rejected-AOC | 2 | Rejected-AOC 2 | |
| 3 | Rejected-Technical | - | Rejected-Technical 3 |
| Sl No | Description | Qty | Unit | ASHRAF P V L3 | T.K.SUNEESH MOHAMMED L2 | salam aboobacker L1 |
|---|---|---|---|---|---|---|
| 1.00maintenance | ||||||
| 1.00 | 15.19:Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge. | 1,125 | kg | 3.73 ₹4,196.25 | 3.55 ₹3,993.75 | 3.19 ₹3,588.75 Lowest |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 1,845 | kg | 181.45 ₹3,34,775.25 | 172.71 ₹3,18,649.95 | 155.4 ₹2,86,713 Lowest |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 200 | sqm | 786.56 ₹1,57,312 | 748.66 ₹1,49,732 | 673.63 ₹1,34,726 Lowest |
| 1.00 | OD56521/2025-2026: Providing and fixing 150mm wide square UPVC rainwater gutter including all necessary fitting and making all necessary connections complete as per the direction of engineer charge at site | 15 | metre | 468.4 ₹7,026 | 445.83 ₹6,687.45 | 401.15 ₹6,017.25 Lowest |
| 1.00 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 9.6 | sqm | 360.67 ₹3,462.43 | 343.3 ₹3,295.68 | 308.89 ₹2,965.34 Lowest |
| 1.01 | 4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) | 1.71 | cum | 8,464.52 ₹14,474.33 | 8,056.7 ₹13,776.96 | 7,249.22 ₹12,396.17 Lowest |
| 1.01 | 50.18.9.8.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2 | 13 | metre | 377.78 ₹4,911.14 | 359.58 ₹4,674.54 | 323.54 ₹4,206.02 Lowest |
| 1.01 | 13.52.2:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work | 117.4 | sqm | 232.4 ₹27,283.76 | 221.2 ₹25,968.88 | 199.03 ₹23,366.12 Lowest |
Tender Value
₹5.9 L
EMD Value
₹14,814
Closing Date
13 Jun 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Assistant Engineer
Office of the Assistant Executive Engineer , Kalamassery Municipality
SO202/26-MAINTENANCE OF MUNICIPAL Office
2025_LSGD_768187_8
LIDEW/AEE/ET/4/2026
Open Tender
Civil Works - Buildings
Item Rate
180 days
Kalamassery
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,310
Yes
₹14,814
Yes
12 Aug 2025
7 Jun 2025
16 Jun 2025
7 Jun 2025
13 Jun 2025
7 Jun 2025
Amount
maintenance
15.19:Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge.
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
OD56521/2025-2026: Providing and fixing 150mm wide square UPVC rainwater gutter including all necessary fitting and making all necessary connections complete as per the direction of engineer charge at site
5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)
50.18.9.8.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2
13.52.2:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work
T.K.SUNEESH MOHAMMED (BID ID -2224565)
ASHRAF P V (BID ID -2224086)
Bidder Name
T.K.SUNEESH MOHAMMED
ASHRAF P V
salam aboobacker
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1253027.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .