PROVISION OF DEFICIENT MARRIED ACCOMMODATION AT CG ENCLAVE OKHA UNDER GE (I) (CG) PORBANDAR

Amount

SCHEDULE "A" Part - I (BUILDING WORKS) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART-II ( EARTH WORK AND SITE CLEARENCE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-III (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IV (INTERNAL ELECTRIC SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-V (ROAD/PATH/CULVERT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VI (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VII (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VIII (EXTERNAL ELECTRIC SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IX (SOLAR WATER HEATER) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-X (STREET/SECURITY LIGHT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XI (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -XII (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' E ' signifies this fact only.

Supplying and laying of 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 (PN-16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc. (a) 20mm Outer Dia of pipe

(b) 25mm Outer Dia of pipe

(c) 32mm Outer Dia of pipe

(d) 40mm Outer Dia of pipe

S&F Angular stop cock 15 mm dia, quarter turn Make - Jaquar Model No CQT-23059 or equivalent in Crab Tree/Kohler brand.

S&F Sink cock with swinging casted round shape spout (Wall mounted model) 15 mm dia, quarter turn Make - Jaquar Model No CQT-23347 or equivalent in Crab Tree/Kohler brand.

S & F Over head Shower 120 dia with wall mounted shower arm Make – Jaquar Model OHS-1989&SHA-477 or equivalent

S & F Two way bib tap / angle cock 15 mm Make – Jaquar Model No CQT-23041 or equivalent

S & F Shower Wall mixer 15mm 2 in 1 Make – Jaquar Model No CON-273KNUPR or equivalent.

SOLAR WATER HEATER Supply, installation and testing of solar water heating system of capacity 300 LPD consisting of that plate collector box fabricated from aluminium extruded sections by means of gas welsing or brazing leak fully insulated with the glas wool (48kg/m3) with supporting structure duly painted with synthetic enamel black paint over a coat of zinc chromate red oxide primer provided with absorber made from copper sheet and copper tubes with protacting coating complete with header grommet, storage tank made from stainless steel sheet of minimum of 20 SWG thickness with puff insulation of minimum 50mm girth outer including of brass socket & nipple fully insulated with glass wool with cold and water piping, gun metal valves, soil type stainless stell heat exchanger of 300 ltr. Per day capacity complete conforming to IS-12933 & 12976 with necessary writing fixed on PCC platform, cold water tank & make up water tank capacity 300 litres per day capable to supply hot water at 60 c all as specified and directed. Make:-Honeywell/ Bosch/Delta/ TATA/ BP SOLAR INDIA/ Racold Notes:- i) The system will be provided with electric back up 2KW for 100 litre and 3KW for 300 litre capacity solar water heating system. ii )The hot water pipe shall be 20mm KITEC (PE-AL-PE) and its cost upto 5.00 RM shall be deemed to be included in rates quoted against respective item. Iii) The thickness of stainless-steel sheet of storage tank will be 20 gauge.

Supply, laying and testing PVC insulated PVC sheathed electric cable heavy duty with stranded copper conductor of size 2.5sqmm x 3 core drawn into and including 25mm dia HMS conduit concealed on wall/laid on surface of roof all as specified. Make-Havells/ NICCO/ Gloster/ Finolex / CCI.

EXTERNAL WATER SUPPLY Supply, laying and joining in trenches DI pipes, class K7 of standard-length spigot and socketed end and including push type joint with rubber gasket as joining material, internal cement mortar coating on external surface with bituminous paint of size 100mm dia confirming to IS 8329 all as spd and directed. Make_ Electro Steel/ JINDALSAW/ TATA METALIKS KUBOTA Pipes ltd.

Supply and fix, jointing DI pipes class K7, 80mm bore flange end with and including jointing material, nut bolts etc all as specified.

M & L for ductile iron fitting such as bend collars, connecting pieces, tees, collars, bends etc suitable for up tp 100mm bore DI pipe including cement motar lining inside complete all as specified & directed.

Supply, installation and testing of CI Sluice valve 100mm dia flanged end class- I PN 1.0 as per IS14846 heavy duty with stainless stell spindle and iron wheel at the top flanges end incl. two nos. of flange joint incl joining materials ie. Bolts and nuts all as directed; Make:L&T/Kirloskar/Zoloto/ Kesin

Supply, installation and testing of CI Sluice valve 80mm dia flanged end class- I PN 1.0 as per IS14846 heavy duty with stainless stell spindle and iron wheel at the top flanges end incl. two nos. of flange joint incl joining materials ie. Bolts and nuts all as directed; Make:L&T/Kirloskar/Zoloto/ Kesin

M & L construction of valve chamber size 1050 x 750x1000 mm depth with PCC foundation in (1:4:8), platering 15mm thick in (1:4) incl. MS sheet cover 3mm thick with angle iron frame 25x25x4mm locking arrangement complete with painting on steel surface with one coat of reoxide paint over two coats of synthaetic paint all as spd and directed. Note: Excavation Returning, Refilling is included in the item.

Material and labour of earthing complete with glavanised steel earth plate electrode 60 x 60 cm x6 mm as earthing lead buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level with top edge of earth plate at depth not less than 1.5 meter below ground level connected to galavanised iron strip 32x6mm as earthing lead by means of bolts, nuts,check nut and washer etc made of galvanised iron incl. 40mm bore GI pipe light grade up to 7.5 meter long all as shown in electrical plate No. of SSR Part I 2009 and as specified or indicated and testing on completion incl. excavation/ earth work in any type of strata, PCC (1:3:6) type C1 earthing chamber, precast RCC Slab 50mm thick in reinforced with welded steel wire fabric (XPM weigh not less than 4 Kg/Sqm ), cast iron frame, funnel wire with mesh, 20mm bore medium grade GI watering pipe, lugs, 40mm bore light grade GI protection pipe, test point etc. complete all s specified and as directed by Eng. Incharge. Note:- i. Item includes the cost of 7.5 meter GI pipe for protection of earth lead. Any addition In length shall be adjusted through deviation order. (ii) Item includes the cost of 7.5 meter GI earth lead. Any addition in lenghth shall be measured and paid under respective item of his schedule.

M & L for LT panel Board cubical type cubical type compact 415 Volts AC 50 Hz, 4 Wire +E, fabricated Polycarbonate, dust proof, water proof anticorrosive and conforming to IP 55 complete including 100 Amp bus bar 4 strip mounted on porcelain insulated & enclosed in chamber connection from incoming and outgoing with operated shutter both side comprising of following:- (a) Copper Bus bar RYB and N of 100 A capacity one set (b) Incoming MCCB 63 Amps 415V FP 36KA— 1 No. © Outgoing MCCB 32 Amp TP—2 Nos. d) Automatic star delta starter for pump set vide item no 27. (e)Digital Voltmeter 0-500 V 96x96mm—01 No. (f)Digial Ammeter 0-100 A 96x96mm—01 set. (g)Panel mounted type digital multifunctional energy meter, CT operated, LT 3 phase, 4 wire—1 No.

Supply, testing and commissioning of centrifugal pump set of discharge capacity range 900 LPM at head range 40 mtr, split casing type, 80x80mm suction/discharge coupled with suitable rating induction motor, mounted on MS chanel/common base plate and fixed with suitable bolts, grouted in PCC foundation, 30 CM above floor level including PVC insulated single core unsheathed copper conductor for connection from starter to motor terminal, incl. the following accessories i.Foot valve- 01 No of sizes suitable for suction of pump. ii.Gun metal butterfly Gate valve-01 No of size suitable for delievery of pump. iii.Pressure gauge on delievery mains of pump I & II. iv.20mm Gi pipe line for priming. v.20mm Gun Metal Gate valve (priming valve)-01 No.

M & L chemical Dozing system Aqua fit Dosing system preparation of tank model VST 1005 of net capacity 170 ltrs FRP Dosing tank dia 650mm( net height 375mm+ conical 300mm) gross height with stand 100mm and consisting of following: (a)Water inlet line (b)Outlet with stainer (c)Drain (d)Over flow (e)Conical bottom for sludge deposition (f)Pot hole with cover (g)Level gauge (h)Agitator 120watt,900 RPM, 1 Phase flange,mounted motor with plastic shaft and impeller service tank model No. VST 1006 of net capacity 100 ltrs FRP dosing tank dia 540mm x bottom dia 480mm and height 575mm consisting of (a)Water inlet pipe (b)Dosing pump inlet arrangement (c)Drain (d)Over flow (e)Level gauge (f)Inspection port (g)Agitator 120watt 900 RPM 1 phase flange mounted motor with plastic shaft & impeller (h) Provision of mounting pump on lid/Wall MAKE : Aquafit or equivalent M/s Sathya Sai Aqua Pura

EXTERNAL ELECTRIC SUPPLY M & L for LT panel Board cubical KIOSK Outdoor type compact 415 Volts AC 50 Hz, 4 wire +E, fabricated Polycarbonate, Nominal Size RAL 7035 finish confirming to IP 54 complete including Copper bus bar 400 Amps, 30 KA, 4 strip mounted on porcelain insulated & enclosed in chamber connection from incoming and out going with openable shutter both side comprising of, bottom cable entry, comprising of following :- (a)Incoming MCCB 250 Amps four pole with microprocessor based release, having breaking capacity 36 KA, ---01 No (b)Outgoing MCCB 40 Amps four pole with microprocessor based release, having breaking capacity 25 KA, ---12 No. (1 Being Spare) (c)digital panel meter for Amp, Volt, KWH, PF, parametre flush monting of size 96x96mm MAKE : Hensel /Neptune/ Universal/ L & T MAKE of MCCB/ Panel Meter : L & T/ Legrand/ ABB/ Siemens

Suppiy and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surfaces on the inner wall confirming to IS 14930 ( Part I and II ) for protection of underground cables of size 90mm outer dia with all fittings laid in trenches / road/ nallah or fixed along wall poles or laid under floor ( including cutting floor/road and making good to match with exesting adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) Make : Rex/Poly/Gemini

STREET/SECURITY LIGHT Supply and fix octagonal hot-dip galvanized street light poles including junction box, height 7 mtrs, top dia 70mm, bottom dia 130mm, sheet thickness 3mm, base plate 220x220x12 foundation nut bolts as per manufacturer recommendation including reinforced cement concrete foundation and hot dip galvanised bracket single arm for fixing of street light and one no of MCB 6amp including 25 Amp four way terminal block all as specified and directed MAKE: BAJAJ/SURYA/PHILIPS/UTKARSH

Supply & fixing of automatic street light switch lising nature switch for automatic switching of street lights based on LUX level of natural light the sensor (natural switch) along with suitable power contractors and MCBs (input-output) should be enclosed in pole/well mountable enclosure made rust proof, electric shock proof, termite proof and FR grade SMC junction box (syntax make) conforming to IP 54 the contractor, MCBs and copper circuit wiring (min 10 sqmm) should be enough to take three phase load of 5 KW; contractor rating 40 Amps MCB (sp) rating 40 Amps. MAKE : Swadeep/ Bajaj/ Healer

Suppiy and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surfaces on the inner wall confirming to IS 14930 ( Part I and II ) for protection of underground cables of size 63 mm outer dia with all fittings laid in trenches / road/ nallah or fixed along wall poles or laid under floor ( including cutting floor/road and making good to match with existing adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) Make : Rex/Poly/Gemini

Supply and Fix time switches 415v 3 phase 5 KW with contactor fitted inside steel enclosure including incoming and outgoing MCBs, Power contractors and SMC Enclosure for encasing complete 3-phase circuit board along with Nature switch-02 all as specified and directed by engineer-in-charge. Make Swadeep (02EC 5kW3p)

INTERNAL ELECTRIC SUPPLY S & F modular type bell ding dong of 2 module size, conforming to IS: 8884- 1978 complete all as specified and directed. Make: Legrand Arteor Cat-Part No. 5734 43 or equivalent model of Havells or Anchor

S & F modular type 1 module TV socket complete all as specified and directed. Make: Legrand Arteor Cat-Part No. 5734 25 / ABB / Hager / Wipro / L&T

S & F modular type 1 module RJ 11 telephone socket with shutter complete all as specified and directed. Make: Legrand Arteor Cart-Part No. 5734 26 / ABB / Hager / Wipro / L&T

S & F 18 W surface/wall mounted LED Decorative light , extruded aluminium housing with PC diffuser and integrated electronic driver with high efficiency long life LED chips, CRI ≥ 80, power factor ≥ 0.95, system luminous efficacy > 100, having average life 50000 hrs, operating voltage 140- 270, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the LED batten fitting complete all as specified and directed. Make: HPL Cat Part No HLPLEDSQSM18(CW) or equivalent model of Havells, Philips or Wipro

S & F 20 W surface/wall mounted LED Luminaries, integrated electronic driver with System luminous efficiency > 100, Operating voltage 140V-270V including electrical commection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to LED fitting Complete all as specified and directed. . Make: BAJAJ Cat No BLTRU 20W WH VIVA/Philips Cat No BN 308C-LED-2220S-6500/ Osram cat No Luxpower Batten 19WL840.

S & F 10/12 W surface mounted round shape LED down light with minimum efficiency 85 lumen/W, high quality polycarbonate opal concave diffuser, high reflective polycarbonate conical shape reflector, input voltage 240 V, input frequency 50 Hz including electric connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to fixture complete all as specified and directed. Make: Wipro Cat-Part No.LW01-101-xxx-60 xx/ GE Cat No. 93057384/ Bajaj Cat No. BGCML 12WWH .

S & F LED street lights, 25 W, lumen output not less than 2500 lm high pressure die cast aluminium housing, 140-270 V, 50 Hz, PF>0.90, including 1.2 mtr long 40/50 mm bore light grade GI pipe mounting bracket made to shape with and including MS clamps of FI 40 mm x 6mm with bolts, nuts, washers and conductor to fitting with 3 core 1 sqmm PVC insulated copper cable from control box to fitting complete all as specified and directed. Note: The quoted unit rate deemed include for painting to clamps with one coat of redoxide paint before fixing. complete all as specified and directed by Engineer-in-charge. Make: Wipro (skyline LED) / Halonix (LUMOS-MINF)

S & F ceiling fan 1200 mm sweep 05 star rated and connecting up to and including provision of 23/0.0076 flexible three core PVC insulated copper conductor cable from ceiling rose to fan etc complete all as specified and directed. Make: Orient (Crown), CG (HS Plus), Hevells( Es- 50)

S & F engery efficient non-metalic fresh air fan having blade sweep 250 mm, air delivery not less than 780 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton Cat-Part No. VENTILUS 10" / Usha (Crisp air) / Orient Ventilator DX

S & F engery efficient metalic exhaust fan having blade sweep 300 mm,operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton Cat-Part No. TRANS AIR 12" / Usha ( Turbo DBB) / Orient Hill Air

S & F ISI marked MCB for AC applications till 63 A, having breaking capacity Icn = 10 kA, conforming to IS/IEC 60898-1-2002, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters, all complete as specified and directed. Make: Schneider, Legrand, Hagar , Siemens

6 A, SP MCB, C- curve

16 A, SP MCB, C- curve

20 A, SP MCB, C- curve

S & F single phase static energy meter of accuracy class 1.0, 240 V , 50 Hz with backlit LCD Optical ports & RS 232 port display of rating 10-60 A with DLMS compliance as per IS 15959 ( Measures Kwh, KVAh, V, I, PF, Frequency, KW, KVA, Six month history of Energy & MD in KW & KVA and anti temper features and load profile complete all as specified and directed. Make: HPL/ L&T/ Secure

S & F 9 W LED lamp complete all as specified and directed. Make: Wipro / philips / Bajaj

S & F distribution Board cum Meter box wall mounting type fabricated from polycarbonate sheet, IP 54 compartmentalized design, bus bar chamber 100 Amp, TPN Cu strip insulated with heat shrinkable insulating material, Cable gland of suitable size prewired and comprising of following: Make: Hensel / Neptune / Universal / L&T (a) MCCB Cap 63 Amp, 4 Pole and 16 kA - 01 No. (b) MCB SP 20 Amp, 10 kA - 08 No. (c ) MCB SP 6 Amp, 10 kA - 01 No. (d) 08 No of cubical for housing single phase meter all as Specified and as directed. (e) Terminal for distribution

S & F distribution Board cum Meter box wall mounting type fabricated from polycarbonate sheet, IP 54 compartmentalized design, bus bar chamber 100 Amp, TPN Cu strip insulated with heat shrinkable insulating material, Cable gland of suitable size prewired and comprising of following: Make: Hensel / Neptune / Universal / L&T (a) MCCB Cap 63 Amp, 4 Pole and 16 kA - 01 No. (b) MCB SP 20 Amp, 10 kA - 07 No. (c ) MCB SP 6 Amp, 10 kA - 01 No. (d) 07 No of cubical for housing single phase meter all as Specified and as directed (e) Terminal for distribution

G.S.MAGO AND SONS CONSTRUCTION PVT.LTD