CERTAIN MISCELLANEOUS E_M WORKS AT INS KALINGA INS KARNA AND NAD BHEEMUNIPATNAM INCLUDING SPECIAL REPAIRS TO E_M FITTINGS IN KILL HOUSE AT INS KARNA AND PROVISION OF CABLE FOR EXISTING FIRE ALARM PANEL AT NAD BHEEMUNIPATNAM AND TRAINING BLOCK AT INS

Amount

Taking down carefully of any type of point wiring light, fans, socket or power complete fitting such as switch ceiling roses, pendent, regulator, sockets etc. for taking schedule of credit and making good disturbed surface of wall, floor etc. complete all as specified and as directed by the Engineer-in-Charge.

M&L for surface point wiring with two runs of 1.5 Sq.mm. PVC insulated, 1100 Volts, unsheathed single core multistranded copper conductor with necessary earth continuity conductor of one run of 1.5 Sq.mm. PVC insulated copper conductor 1100 Volts grade, drawn through PVC casing and caping duly fixing on wall/ceiling with necessary control boxes made out 1.6mm thick CRCA sheet duly covered with 3mm thick laminated hylam sheet for mounting of switches/sockets etc. for one light point/ fan point controlled by one 5 Amps one way switch complete all as specified and as directed by the Engineer-in-Charge.

M&L for surface point wiring with two runs of 2.5 Sq.mm. PVC insulated, 1100 Volts, unsheathed single core multistranded copper conductor with necessary earth continuity conductor of one run of 2.5 Sq.mm. PVC insulated copper conductor 1100 Volts grade, drawn through PVC casing and caping duly fixing on wall/ceiling with necessary control boxes made out 1.6mm thick CRCA sheet duly covered with 3mm thick laminated hylam sheet for mounting of switches/sockets etc. for one 3 pin 15 Amps switch socket combination complete all as specified and as directed by the Engineer-in-Charge.

M&L for surface point wiring with two runs of 4 Sq.mm. PVC insulated, 1100 Volts, unsheathed single core multistranded copper conductor with necessary earth continuity conductor of one run of 4 Sq.mm. PVC insulated copper conductor 1100 Volts grade, drawn through PVC casing and caping duly fixing on wall/ceiling with necessary control boxes made out 1.6mm thick CRCA sheet duly covered with 3mm thick laminated hylam sheet and connecting to common earth dolly complete all as specified and as directed by the Engineer-in-Charge.

M&L for concealed point wiring with 4 Sq.mm. PVC insulated, 1100 Volts, unsheathed single core multi stranded FRLSH copper conductor with necessary earth continuity conductor of 4 Sq.mm. PVC insulated copper conductor 1100 Volts grade, drawn through PVC rigid conduit of suitable size duly fixing on wall/ceiling connected to common earth dolly for one metal clad socket complete all as specified and as directed by the Engineer-in-Charge.

M&L for sub main wiring concealed type with two runs of 1.5 Sq.mm. PVC insulated unsheathed FRLSH copper conductor single core multistranded and one run of insulated copper earth wire 1.5 Sq.mm. drawn through PVC casing & caping complete all as specified and as directed by the Engineer-in-Charge.

M&L for sub main wiring suface type with two runs of 4 Sq.mm. PVC insulated unsheathed FRLSH copper conductor single core multistranded and one run of insulated copper earth wire 4 Sq.mm. drawn through PVC casing & caping complete all as specified and as directed by the Engineer-in-Charge.

M&L for sub main wiring suface type with two runs of 6 Sq.mm. PVC insulated unsheathed FRLSH copper conductor single core multistranded and one run of insulated copper earth wire 6 Sq.mm. drawn through PVC casing & caping complete all as specified and as directed by the Engineer-in-Charge. Note for Item Nos.6 to 8: Two runs of copper conductor, one runs of earth wire and one run of PVC conduit/casing & caping shall be measured as one length.

S&F switch piano flush type single pole one way 5 Amps, 230 Volts, 50 Hz complete all as specified and directed by Engineer-in-Charge.

S&F switch piano flush type single pole one way 15 Amps, 230 Volts, 50 Hz complete all as specified and as directed by the Engineer-in-Charge.

S&F switch socket combination 2 in 1, 5 pin 5/15 Amp 240 Volts flush type multipurpose complete all as specified and as directed by the Engineer-in-Charge.

S&F ceiling rose surface type bakalite 2/3 terminals complete all as specified and as directed by the Engineer-in-Charge.

S&F stepped type electronic fan regulator flush type 120 W, 230 Volts, 50 Hz complete all as specified and as directed by the Engineer-in-Charge.

S&F electronic dimmer 450 W flush type, 240 Volts complete all as specified and as directed by the Engineer-in-Charge.

S&F MCCB sheet steel enclosure made of 3.15mm powder coated CRCA sheet with IP 65 protection with all accessories and mounted on suitable angle frames including foundation, with and including MCCB 4 pole 200 Amps, 25 KA as incomer, 200 Amps rated bus bar, vertical type complete all as specified and as directed by the Engineer-in-Charge.

S&F sheet steel enclosure MCB DB TPN 4 way with 200 Amps rated bus bar horizantal type 230 Volts IP 43 protection with double metal door complete all as specified and as directed by the Engineer-in-Charge.

S&F single pole and neutral sheet metal enclosures with a two pin and earth plug and socket 240 V, 50 Hz complete with one single pole MCB 20 A complete all as specified and as directed by the Engineer-in-Charge.

S&F MCB four pole 63 Amps, 415 Volts, 'C' series complete all as specified and as directed by the Engineerr-in-Charge.

S&F MCB DP 32 Amps, 230 Volts, 'C' series complete all as specified and as directed by the Engineer-in-Charge.

S&F MCB SP 6 to 40 Amps, 230 Volts, 'C' series complete all as specified and as directed by the Engineer-in-Charge.

S&F LED flood light 200 W, 230 Volts luminairy with pressure die cast aluminium housing IP 65, any height and any location including internal prewired with complete accessories complete all as specified and as directed by the Engineer-in-Charge. Make: Crompton Cat. Part No.LFLPI-500-CDL/60 or equivalent of Philips/Wipro/Havells/C&S

S&F in repairs, LED flood light fitting 70 Watt, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP 66 protection and impact resistance of IK07 complete all as specified and as directed by the Engineer-in-Charge. Make: Havells Model No.ENDURA PEARL PLUS Cat. Part No.ENDURAPEARLPLUSSL70WLED757PASYTO PC or equivalent of Philips/Wipro/C&S/Bajaj

S&F LED street light fitting pressure die cast aluminium housing with heat resistant toughened glass & IP 65 protection luminaries of capacity 45 Watt complete all as specified and as directed by the Engineer-in-Charge. Make: Crompton Cat. Part No.LSTS-45-CDL-1 or C&S INDUS Series Cat. Part No.INDUS/45W/LS or equivalent model in Philips/Havells/Wipro/C&S

S&F in repairs, LED street light 30 W, IP 65, 230 Volts, 50Hz energy saving, long life aesthetically desgined die-cast aluminium landscape luminaire for downward lighting with high power LED as light source complete with twin core copper conductor of suitable size complete all as specified and as directed by the Enginner-in-Charge. Make: Havells Model No.ENDURA CITYLITE PLATINUM Cat. Part No.ENDURACITYLITEPLATSL30W LED757SA SYBOPC or equivalent in Phillips/Crompton/ Wipro/C&S

S&F in repairs, LED batten 20 W complete with all accessories and including connecting up with twin core copper conductor with suitable size including complete all as specified and directed by Engineer-in-Charge. Make: Havells Model No.ENDURA LINEAR NEO Cat. Part No.ENDURALINEARNEOBS20WLED830SPCWH or equivalent in Phillips/Crompton/ Wipro/C&S

S&F LED polaris III recess/surface mounted 2X2 tile 230 Volts, 50 Hz with all the fixing accessories complete all as specified and as directed by the Engineer-in-Charge. Make: Crompton Cat. Part No.LCTLRN-36-CDL or equivalent in Phillips/Wipro/Havells

S&F LED polaris III recess/surface mounted 2X2 tile 230 Volts, 50 Hz with all the fixing accessories complete all as specified and as directed by the Engineer-in-Charge. Make: Crompton Cat. Part No.LCTLSN-36-CDL or equivalent in Phillips/Wipro/Havells

S&F LED post top lantern 20 W, single phase, 240 V, 50 Hz , IP 65 protection with all accessories complete all as specified and as directed by the Engineer-in-Charge. Make: Crompton HERITAGE Cat. Part No.LPTH-20-CDL or equivalent in Phillips/Havells/C&S/Wipro

S&F wall mounted fan 400mm sweep, BEE 5 star rated 380 Rpm, pull cord control for speed and oscillations, 3 leaf aerodynamically designed balanced blades in ivory gold/white colour and connecting up with flexible 3 core 1.5 Sq.mm. copper cable complete all as specified and as directed by the Engineer-in-Charge. Make: Crompton WM wind flow (HI-Speed) or equivalent in Havells/Phillips

S&F On/Off load change over switch 200 Amps, 415 Volts, 4 Pole, 50 Hz in sheet metal enclosure, IP 65 protection complete all as specified and as directed by the Engineer-in-Charge.

Supply and installed hi wall AC split unit indoor/out door complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 BEE star rating and EER 3.2 of capacity 1 ton air conditioner with outdoor stand/bracket including drain pipe line AC indoor unit to ground level complete all as specified and as directed by the Engineer-in-Charge.

Supply and installed hi wall AC split unit indoor/out door complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 BEE star rating and EER 3.2 of capacity 1.5 ton air conditioner with outdoor stand/bracket including drain pipe line AC indoor unit to ground level complete all as specified and as directed by the Engineer-in-Charge.

S&F voltage stabilizer for automatic operation single phase, 5 KVA capaity, naturally air cooled indoor type & desigened for input variation between 170 Volts to 270 Volts with out put voltage 230 Volts with accuracy of +2.5% complete all as specified and as directed by the Engineer-in-Charge.

S&F voltage stabilizer for automatic operation single phase, 4 KVA capaity, naturally air cooled indoor type & desigened for input variation between 170 Volts to 270 Volts with out put voltage 230 Volts with accuracy of +2.5% complete all as specified and as directed by the Engineer-in-Charge.

S&F voltage stabilizer for automatic operation single phase, 3 KVA capaity, naturally air cooled indoor type & desigened for input variation between 170 Volts to 270 Volts with out put voltage 230 Volts with accuracy of +2.5% complete all as specified and as directed by the Engineer-in-Charge.

S&F timelite distribution board 32A, 3 pole, 230 volts digital time switch complete all as specified and directed by Engineer-in-Charge. Make: Indoasian cat No.TL032DB0 or equivalent model in L&T/C&S/SIEMENS

S&F hot moulded (FRP) junction box for street light pole with locking arrangement with IP-65 protection of size 155x100x60mm with 32 Amp 4 way heavy duty terminal block with 10 Amp MCB SP and two steel bracket to fix with pole complete all as specified and as directed by the Engineer-in-Charge.

S&F medium grade 40mm dia. GI pipes with all fittings for post top lantern with one layer of black paint over two layer of epoxy primer complete all as specified and as directed by the Engineer-in-Charge.

S&F GI bracket suitable for street light fitting made out of 40mm dia. GI tubing of light grade bent to shape of 1.5m length complete including taking out old one complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, house service bracket 1.5 mtrs. long GI pipe 40mm dia. medium grade two Nos. 90 degrees bends MS hook and stay or guy complete all as specified and as directed by the Engineer-in-Charge.

S&F MS clamps suitable for 40mm GI pipe made out of 25x4mm flat iron complete with necessary nuts and bolts complete all as specified and as directed by the Engineer-in-Charge.

Supply, laying and testing 3 core round flexible cable 1.5 Sq.mm. PVC insulated, 1100 Volts grade, PVC sheathed with two runs of single core multistranded FLRS copper conductor along with one run of necessary earth continuity conductor of 1.5 Sq.mm. complete all as specified and as directed by the Engineer-in-Charge.

Supply, fixing, testing, laying, saddling, glanding and termination of 2 core 2.5 Sq.mm. twisted pair armoured cable of copper conductor complete all as specified and as directed by the Engineer-in-Charge.

Supply and laying LT underground cable XLPE insulated and sheathed armoured cable 1100 volts 3½ core 240 Sq.mm. aluminium conductor in trenches/poles and connecting with all accessories complete all as specified and as directed by the Engineer-in-Charge.

Supply and laying LT underground cable XLPE insulated and sheathed armoured cable 1100 volts 4 core 25 Sq.mm. aluminium conductor in trenches/poles and connecting with all accessories including taking out the old unserviceable cable complete all as specified and as directed by the Engineer-in-Charge.

Supply and laying LT underground cable XLPE insulated and sheathed armoured cable 1100 volts 2 core 6 Sq.mm. aluminium conductor in trenches/poles and connecting with all accessories complete all as specified and as directed by the Engineer-in-Charge.

Excavation in trenches n. exc.1.5m wide and n. exc. 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 Sq.m. on plan and n. exc. 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed by the Engineer-in-Charge.

Excavation in trenches n. exc.1.5m wide and n. exc. 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 Sq.m. on plan and n. exc. 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed by the Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25cm complete all as specified and as directed by the Engineer-in-Charge.

Removing excavated soil to a distance n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

Supply and spread clean river sand as cable cushioning for protection of cable to be laid in trenches all as per SSR Part-I complete all as specified and as directed by the Engineer-in-Charge. Note: Only punned thickness of 18cm will be measured for the purpose of payment.

Supply and lay common burnt building clay bricks of size 230x115x75mm for protection of cable, laying in trenches complete all as specified and as directed by the Engineer-in-Charge.

S&F 15 mm dia GI water tubing ISI marked medium grade of size including all fittings such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F 25mm dia. GI water tubing 'medium grade' conforming to IS 1239 (Part-I) with all fittings such as bends, tees, short pieces, connectors elbows, reducers, unions, sockets etc., and laid in trenches, including testing complete all as specified and directed by the Engineer-in-Charge.

S&F 40mm dia. GI water tubing 'medium grade' conforming to IS 1239 (Part-I) with all fittings such as bends, tees, short pieces, connectors elbows, reducers, unions, sockets etc., and laid in trenches, including testing complete all as specified and directed by the Engineer-in-Charge.

S&F 15mm dia. chromium plated stop valves, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F 25mm dia. gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F 40mm dia. gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F100mm dia. sluice valve of cast iron body, PN 1.6, with both ends flanged, drilled at both the ends, conforming to IS-780, having gunmetal spindle with iron wheel at top complete with nuts, bolts, washers, rubber gasket champion-20, 3mm thick sheet complete all as specified and as directed by the Engineer-in-Charge.

M&L for cutting the existing 100mm dia. CI/DI pipe line including insertion of CI 'TEE' of size 100x100x40mm dia. for branch connection with necessary CI specials as required at site complete all as specified and as directed by the Engineer-in-Charge.

M&L for construction of brick masonry valve chamber 1050x1050x1050mm size with plain cement concrete in 1:4:8 type D2 foundation and 15mm thick plaster in CM 1:4 on brick wall inside and brick chamber built in cement mortar 1:6 including providing of MS Sheet cover 3mm thick with angle iron (40x40x6mm) brackets grouted to brick wall duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with lifting handle and locking arrangement complete all as specified and as directed by the Engineer-in-Charge.

Supply and laying steel tubing galvanised 25mm bore light grade with all fitting for cable protection complete all as specified and as directed by the Engineer-in-Charge.

Supply and laying steel tubing galvanised 40mm bore light grade with all fitting for cable protection complete all as specified and as directed by the Engineer-in-Charge.

Supply and laying steel tubing galvanised 80mm bore light grade with all fitting for cable protection complete all as specified and as directed by the Engineer-in-Charge.

M&L for earthing complete with 7.5m CI pipe 80mm dia. with both flanged ends, centrifugally cast iron, Class A, in any length, joints with suitable stainless steel nuts and bolts and sufficient slote up to 7.5m length buried directelly and preferable vertically in ground with top flanged ended 7.5m below ground lebel welded/connected with copper strip 25x3mm size on the top edge of the flange to bottom edge of the flanged for earthing includding filling the pit with charcol and common salt surrounding the earth pipe including drilling 400mm dia. bore in any strata of soil to lower the CI pipe complete all as specified and as directed by the Engineer-in-Charge. Note: The rate deemed to be included earth pit chamber, CI cover and earth lead 32x6mm GI strip from earth pit to DB upto 7m length and testing on completion.

M&L for earthing complete with 7.5m CI pipe 80mm dia. with both flanged ends, centrifugally cast iron, Class A, in any length, joints with suitable stainless steel nuts and bolts and sufficient slote up to 7.5m length buried directelly and preferable vertically in ground with top flanged ended 7.5m below ground lebel welded/connected with copper strip 20x3mm size on the top edge of the flange to bottom edge of the flanged for earthing includding filling the pit with charcol and common salt surrounding the earth pipe including drilling 400mm dia. bore in any strata of soil to lower the CI pipe including taking down old earthing material complete all as specified and as directed by the Engineer-in-Charge. Note: The rate deemed to be included earth pit chamber, CI cover and earth lead 32x6mm GI strip from earth pit to DB upto 7m length and testing on completion.

suresh electricals

M/s Chandu Lavanya Engineers Contrctors