Resurfacing and Strengthening of Various Roads of Balasinor and Virpur Taluka under MMGSY-SCSP 2025-26, Package No.05,(Total-2 Road) District : Mahisagar

Name of work :- Resurfacing and Strengthening of Various Roads of Balasinor and Virpur Taluka

under MMGSY-SCSP 2025-26, Package No.05,(Total-2 Road) District : Mahisagar

BILL OF QUANTITIES

Quantities Estimated Rates

Item estimated but Total Amount According

Item estimated but Total Amount According

Item of work Unit

No. may be more to Estimated Quantities

or less In Figure In Words

[1] 3.41 Clearing and grubbing road land including uprooting rank 28455.09 Rupees Twenty Hec

vegetation grass bushes,shrubs,sapling and trees girth up to 300 Eight Thousand

mm removal of stumps of trees cut earlier and disposal of Four Hundred Fifty

unserviceable materials (C) By mechanical means in area of light Five and Paise Nine

[2] 8115.39 Earthwork for embankment including breaking clods, dressing 177.91 Rupees One Cum

with all lead and lift and including watering rolling and Hundred Seventy

consolidation of subgrade in layers at O.M.C. to required dry Seven and Paise

density including filling the depression which occur during the Ninety One Only

process using power roller 8T to 10T.(E) From Borrow area

with all lead and Lift

[3] 1539.72 Providing, laying, spreading and compacting stone aggregates of 1408.91 Rupees One Cum

specific sizes to water bound macadam (Grade-II) (M.C. Metal of Thousand Four

size 40 to 63 mm) specification including spreading in uniform Hundred Eight and

thickness, hand packing , rolling with vibratory roller 80-100 kN Paise Ninety One

static wt. to proper grade and camber, applying and brooming, Only

stone screening/binding materials to fill-up the interstices of

coarse aggregate, watering and compacting etc. complete as per

Specifcation. (45 to 63mm size M.C. Metal)

[4] 1075.20 Providing and laying Compacted Hard Murrum for side shoulder 819.72 Rupees Eight Cum

including carraige of material and spreading on prepared base Hundred Nineteen

including compacting as per MOST Specification etc... Complete and Paise Seventy

[5] 2430.60 Providing & laying 37.5 mm thick Bituminous grout base course 2414.35 Rupees Two MT

using B.T. stone aggregate as per required gradation with Thousand Four

asphalt of VG-30 grade at the rate of 1.99% i.e. 19.90 Kg/ M.T. by Hundred Fourteen

weight of total mix of asphalt & for tack coat using Bitumen and Paise Thirty

emulsion RS1 at 4.0 kg/10 sq.mt. including heating & mixing in Five Only

drum mix plant / continuos batch mix plant transporting the

mix spreading the same by paver finisher and consolidation by

vibratory roller as per MORT&H specification including cost of

all materials fuel, labours, tools and plant etc using contractor's

own machineries, hot mix plant and paver finisher etc. complete.

[6] 1515.06 Providing and laying 37.5mm thick Bituminous Macadam with 2947.18 Rupees Two MT

B.T. aggregate as per MORTH specification and using bitumen Thousand Nine

emulsion RS-1 as per IS 8887: for tack coat @ 2.50 KG. / 10 Hundred Forty

Sq.m. on B T Surface with mechanical sprayer and Bulk asphalt Seven and Paise

VG-30 for mixing @ 34.00 KG. / M.T. i.e. 3.40 % of total weight of Eighteen Only

mix including heating and mixing the aggregate and asphalt in

continuous of drum mix plant and hot laid process spreading the

same by paver finisher and consolidation with roller as per

MORTH specification to achieve desire density, including

providing all materials equipments, tools and plants, fire wood,

oil, kerosene, labour charges etc. complete using contractor's

own machinery drum mix plant and paver finisher etc. complete.

[7] 844.77 Providing & Laying 20 mm thick Mix sealsurface using BT 3667.31 Rupees Three MT

aggregate as per MORT & H gradation and specification asphalt Thousand Six

Grade VG 30 for mixing 50.90 Kg/Mt of Total mix (i.e. 5.09% ) Hundred Sixty

mixing the aggregate and asphalt by continuous batching of Seven and Paise

Drum mix plant incl. loading , transporting & spreading the same Thirty One Only

by paver finisher and consolidstion by vibratory roller 80 to

KN static wt incl. flushing sand or stone dust at the rate of

cmt/100 smt etc complete. incl. T & Ps fire wood , oil ,fuel

labour charges , etc complete

[8] 547.00 Dismentaling the existing structure including removing and 930.42 Rupees Nine Cum

stacking the dismentelled materials as and where directed. (A) Hundred Thirty and

R.C.C. work Paise Forty One Only

Quantities Estimated Rates

Item estimated but Total Amount According

Item estimated but Total Amount According

Item of work Unit

No. may be more to Estimated Quantities

or less In Figure In Words

[9] 192.00 Box Cutting the road surface to proper slope and camber for 109.41 Rupees One Cum

making a base for road work including removing the excavated Hundred Nine and

stuff and depositing on the road side slope as directed upto Paise Forty One Only

[10] 96.00 Construction of 100 mm thick compacted GRANULAR SUB BASE 1247.96 Rupees One Cum

( Grade-I , Crushed B T materials of 53 mm to 9.5 mm @ 50 %, Thousand Two

9.5 mm to 2.36 mm @ 20 %, Below 2.36 mm @ 30 % ) by Hundred Forty

providing close graded matrial , mixing in a machanical mix Seven and Paise

plant at OMC, carriage of a mix material to work site, spreading Ninety Six Only

uniform layers with motor grader on prepared surface and

compacting with vibratory power roller to achieve desire

density , complete clause as per

[11] 326.70 Providing and filling in foundation with ordinary cement 3341.15 Rupees Three Cum

concrete M- 100 mix including formwork, vibrating, ramming Thousand Three

and curing complete. (A) Foundation and plinth Hundred Forty One

and Paise Fifteen

[12] 367.00 Providing and laying contolled cement concret M-20 by trimix 5629.17 Rupees Five Cum

method and curing complete including compacting with surface Thousand Six

mechanical vibrator, mechanical floater, chanelling formwork, Hundred Twenty

grooving including expantion joint and construction joint Nine and Paise

including filling asphalt filler joint as per instruction of Engineer Seventeen Only

[13] 7.40 Providing and Fixing in position FE 500/500D TMT bar 73243.01 Rupees Seventy MT

reinforcement including cutting, bending and tying complete as Three Thousand

per detailed drawings.(A) R.C.C. Kerb. (B) R.C.C. Foothpath.(C) Two Hundred Forty

R.C.C. Approach Slab. (D) Wearing coat. (upto 10Ton) Three and One Paisa

[14] 8.00 Cautionary Warning Sign :-Providing and fixing sign boards 3906.19 Rupees Three No

made out of 2mm aluminium sheet / 4mm ACP (Aluminum Thousand Nine

composite Panel); size 90 x 90 x 90 cms. equilateral triangle as Hundred Six and

per design of IRC-67-2012. Pre treated with phospheting Paise Nineteen Only

process & acid etching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint ;reflectorised with

Micro Prismatic Grade retro refiective sheeting of Type-11 as

per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long

stand post of 75 x 75 x 6mm as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends. The details

of symbol for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC block of

size 45 x 45 x 60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-B Type-4

Retro Reflective sheeting

[15] 10.00 Regulatory / Mandatory Sign :-Providing and fixing sign boards 3540.12 Rupees Three No

made out of 2mm aluminium sheet / 4mm ACP (Aluminum Thousand Five

composite Panel); size 60 cms Dia Circle as per design of IRC-67- Hundred Forty and

2012. Pre reated with phospheting process & acid etching; Paise Twelve Only

coated with one coat of epoxy primer and two coats of best

quality epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x

6mm as required and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings

in black and white bends. The details of symbol foreach board

shall be as per theinstruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 10 years for

the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third

party test lab for the product offered shall be submitted by

contractor. (A) Class-B Type-4 Retro Reflective sheeting

Quantities Estimated Rates

Item estimated but Total Amount According

Item estimated but Total Amount According

Item of work Unit

No. may be more to Estimated Quantities

or less In Figure In Words

[16] 3.00 STOP Sign :-Providing and fixing sign boards made out of 2mm 6704.36 Rupees Six No

aluminium sheet / 4mm ACP (Aluminum composite Panel); size Thousand Seven

90 cms Octagone as per design of IRC-67-2012. Pre treated with Hundred Four and

phospheting process & acid etching; coated with one coat of Paise Thirty Six Only

epoxy primer and two coats of best quality epoxy paint

;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type- 11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x 6mm

as required and frame fabricated from suitable size iron angle of

35 x 35 x 3mm; painted with bestquality epoxy coatings in black

and white bends. The details of symbol foreach board shall be as

per theinstruction of engineer in charge. The fixing at site shall

be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 10 years for

the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third

party test lab for the product offered shall be submitted by

contractor. (A) Class-B Type-4 Retro Reflective sheeting

[17] 10.00 Providing and fixing ordinary kilometer stone of precast cc 1:2:4 1293.39 Rupees One No

including necessary reinforcemnent as per IRC type desing and Thousand Two

Fixing in cc 1:4:8 including painting and lettering etc.complete Hundred Ninety

Three and Paise

Thirty Nine Only

[18] 50.00 Chevron sign :-Providing and fixing sign boards made out of 3711.75 Rupees Three No

1.5mm aluminium sheet / 3mm ACP (Aluminum composite Thousand Seven

Panel); size 60x50 cm as per design of IRC-67-2012. Pre treated Hundred Eleven and

with phospheting process & acid etching; coated with one coat Paise Seventy Five

of epoxy primer and two coats of best quality epoxy paint Only

;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type- 11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.3 mtr long stand post of 75 x 75 x 6mm

as required and frame fabricated from suitable size iron angle of

50 x 50 x5mm; painted with bestquality epoxy coatings in black

and white bends. the details of symbol or inscription / numerals

for each board shall be as per the instruction of engineer in

charge.The fixing at site shall be in 1:2:4 CC blockof size 45 x

x 60 Cms. for each leg.including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from originaa

manufacturer & a certified copy of 3 year outdoor exposure test

report from third party est lab for the product offered shall be

submitted by contractor. (A) Class-B Type-4 Retro Reflective

[19] 6.00 Hazard Marker Sign :-Providing and fixing sign boards made out 3518.69 Rupees Three No

of 2.0 mm aluminium sheet / 4 mm ACP (Aluminum composite Thousand Five

Panel); size 90x30 cms. rectangular as per design of IRC-67- Hundred Eighteen

2012. Pre treated with phospheting process & acid etching; and Paise Sixty Nine

coated with one coat of epoxy primer and two coats of best Only

quality epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 1.8mtr long stand post of 75 x 75 x

6mm as required and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings

in black and white bends. The details of symbol foreach board

shall be as per theinstruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 10 years for

the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third

party test lab for the product offered shall be submitted by

contractor. (A) Class-B Type-4 Retro Reflective sheeting

[20] 72.00 Providing and fixing pre cast C.C. M-150 hectometer stone with 356.50 Rupees Three No

necessary reinforcements per I.R.C. type design including Hundred Fifty Six

painting, lettering etc. complete (ii) Fixing in C.C. 1:5:10 and Paise Fifty Only

Quantities Estimated Rates

Item estimated but Total Amount According

Item estimated but Total Amount According

Item of work Unit

No. may be more to Estimated Quantities

or less In Figure In Words

[21] 170.00 Type - A, "W" : Metal Beam Crash Barrier (Providing and 3354.21 Rupees Three Rmt

erecting a "W" metal beam crash barrier comprising of 3 mm Thousand Three

thick corrugated sheet metal beam rail, 70 cm above Hundred Fifty Four

road/ground level, fixed on ISMC series channel vertical post, and Paise Twenty

150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m One Only

below ground/road level, all steel parts and fitments to be

galvanised by hot dip process, all fittings to conform to IS:1367

and IS:1364, metal beam rail to be fixed on the vertical post with

a spacer of channel section 150 x 75 x 5 mm, 330 mm long

complete as per clause 811)

[22] 8.00 Village Name Sign :-Providing and fixing sign boards made out 6397.43 Rupees Six No

of 2mm aluminium sheet/ 4mm ACP (Aluminum composite Thousand Three

Panel); size 90x60 cms. rectangular as per design of IRC-67- Hundred Ninety

2012. Pre treated with phospheting process & acid etching; Seven and Paise

coated with one coat of epoxy primer and two coats of best Forty Three Only

quality epoxy paint

;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.3mtr long stand post of 75 x 75 x 6mm

as required and frame fabricated from suitable size iron angle of

35 x 35 x 3mm; painted with bestquality epoxy coatings in black

and white bends. The details of symbol or inscription/letters /

numerals for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-B Type-4

Retro Reflective sheeting

[23] 2019.52 Road marking with hot applied thermoplastic paints with 367.72 Rupees Three Sqm

reflectorising glass beads on bitumin surface providing and Hundred Sixty

laying a hot applied thermoplastic compound 2.5 mm thick Seven and Paise

including reflectorising glass beads @ 250gms per sqm area, Seventy Two Only

thickness of 2.5mm is excluding of surface applied glass beds as

per IRC:35-2015. The finished surface to be level, uniform and

free from streaks and holes. zebra patta /bump patta

lane/center line/ edge line/cut patta. The white color marking

should provide liminance coefficinet on cemend road shalll be

min 130 mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service life during the day time. The

marking should meet the performance criteria for night time

reflectivity, wet reflectivity and skid resistance as mentioned in

the section-15 of IRC 35-2015. Warranty for the Retro

reflectivity should be 2 years.

[24] 1018.00 Cat Eye / Road Stud / RPM: Supplying of Molded Twin Shanks 326.23 Rupees Three No

Raised Pavement Markers made of polycarbonate and ABS Hundred Twenty Six

moulded body and reflective panels with micro prismatic lens and Paise Twenty

capable of providing total internal reflection of the light entering Three Only

the lens face and shall support a load of 13635 kgs. tested in

accordance to ASTM D 4280 Type H and complying to

Specifications of Category A of MORTH Circular No

RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width

and length shall not exceed 20 mm, 130 mm and 130 mm and

with minimum reflective area of 13 Sqcm on each side and the

slope to the base shall be 35 +/- 5 degree. The strength of

detachment of the integrated cylindrical shanks, (of diameter

not less than 19 +/- 2 mm and height not less than 30+/- 2 mm)

from the body is to be a minimum value of 500 Kgf. Fixing will

be by drilling holes on the road for the shanks to go inside,

without nails and using epoxy resin based adhesive as per

manufacturers recommendation and The color of the marker

should be as per the IRC 35-2015 and as directed by Engineer-in-

Quantities Estimated Rates

Item estimated but Total Amount According

Item estimated but Total Amount According

Item of work Unit

No. may be more to Estimated Quantities

or less In Figure In Words

[25] 2.00 Citizen' s information Board- Providing and fixing of typical 11113.84 Rupees Eleven No

information board as per instruction. Two MS plates of 1.6 mm Thousand One

thick, of 900 mm x 750mm size fixed at top & bottom duly Hundred Thirteen

welded with MS angles of 25 x 25 x 5 mm thick M.S plate shall and Paise Eighty

be welded by two vertical M.S flats & four horizontal M.S flates 5 Four Only

mm thick to 75 mm x 75 mm of 12 SWG square tubes posts duly

embedded in cement concrete M-15 grade blocks of 600mm x

600mm x 75mm, below ground level. Painting New letters &

figure of any shade with ready mixed synthetic enample paint of

superior quality in required shade and colour, All sections of

framed posts and steel tube will be painted with primer and two

coats of epoxy paints as per drawing Clause 1701 and Annexure

[26] 2.00 "LOGO" Board : Providing and fixing of LOGO informatory sign 4831.69 Rupees Four No

board with Logo as per section 1700 of MORD specifications and Thousand Eight

drawing. The board will be a composite unit consisting of Two Hundred Thirty One

Plates of ACM (Aluminum Composite Material), material and Paise Sixty Nine

specifications as per clause 17001.3. The top most plate will be Only

of 3mm ACP in diamond shape of 600x600mm size, riveted with

MS angle iron frame of 25mmx25mmx5mm size on back on

edges. The Lower plate will be of 4mm ACP of 1100x300mm size

riveted with MS angle iron frame of 25mmx25mmx5mm size on

back on edges. Riveting of all the sheets over angle and flat iron

frame will be done neatly to have plain surface on one side. The

angle iron frame of Both the plates will be welded to a 75mm

x75mmx6mm Mild steel post at Centre and this post will be

embeded in cement concrete M15 grade block of

450x450x600mm below ground level. The height of the bottom

of the lower plate will be 1200mm from normal ground level.

The spacing between the diamond shaped plate and Lower Plate

is kept 150mm. logo, letters and numerals on the ACM should

be made up of Retro Reflective sheeting of Type-1 AEGP Class-A

grade as per the latest MORD section 1700 and IRC 67-2012

specifications. Al the section of the frame and posts shall be

painted with primer and two coats of epoxy paint. The design,

painting and lettering shall be done as per the Logo sign Design

and as directed by Engineer in-charge. A warranty for 5 years

for the Retro reflective sheeting for Type-1 Class-A from original

manufacturer shall be submitted by contractor.

Quantities Estimated Rates

Item estimated but Total Amount According

Item estimated but Total Amount According

Item of work Unit

No. may be more to Estimated Quantities

or less In Figure In Words

[27] 2.00 Project Information Board: Providing and fixing of typical 11130.01 Rupees Eleven No

Project informatory sign board with Logo as per 1700 of MORD Thousand One

specifications and drawing. The board will be a composite unit Hundred Thirty and

consisting of Three Plates ACM (Aluminum Composite One Paisa Only

Material), material specificaitons as per clause 17001.3. The top

most plate will be of 3mm ACM in diamond shape of

600x600mm size, riveted with MS angle iron frame of

25mmx25mmx5mm size on back on edges. The middle 4mm

ACM plate of will be 1200x150mm size riveted with MS angle

iron frame of 25mmx25mmx5mm size on back on edges. The

main 4mm ACM lower most plate will be 1500mmx600mm size,

riveted with MS angle iron frame of 25mmx25mmx5mm size.

Riveting of all the sheets over angle and flat iron frame will be

done neatly to have plain surface on one side. The angle iron

frame of lower most plate and flat iron frame of the middle plate

will be welded to two nos. 75mm x75mm (12 SWG) sheet tubes

posts placed at 1125mm apart centre to centre. the top of the

middle plate will be flushed with the top of 75mm dia medium

steel tube posts and these posts will be embeded in cement

concrete M15 grade block of 450x450x600mm below ground

level. The height of the bottom of the lower plate will be

1200mm from normal ground level and the bottom of the

middle plate will be 100mm above the top level of the lower

most plate. the diamond shaped plate mounted over flat angle

iron frame will be connected to middle plate by square steel

section of 47mmx47mm, thickness 12SWG having a spacing of

100mm between the diamond shaped plate and middle plate

and this square section will be riveted to the bottom point of the

diamond shaped plate. logo, letters and numerals on the ACM

should be made up of Retro Reflective sheeting of Type-1 AEGP

Class-A grade as per the latest MORD section 1700 and IRC 67-

[28] 2422.00 2012 specifications.

Excavation Al the section

for foundation upto1.5mof the frame

depth and posts

including shallout

sorting 253.88 Rupees Two Cum

and stacking of useful materials and disposing of the excavated Hundred Fifty Three

stuff upto 50 Meter lead (B) Dense or Hard soil. and Paise Eighty

[29] 2039.00 Providing and filling in foundation with ordinary cement 3904.58 Rupees Three Cum

concrete M- 150 mix and providing necessary vertical pin Thousand Nine

headers including formwork, vibrating, ramming and curing Hundred Four and

complete. Paise Fifty Eight

[30] 16720.00 Providing TMT Bar FE 500/500D reinforcement for R.C.C. work 77.29 Rupees Seventy Kg

including bending, binding and placing in position complete Seven and Paise

upto floor two level Twenty Nine Only

[31] 1050.00 Providing and laying Weep hole in abutment and return by using 86.73 Rupees Eighty Six No

PVC. pipe of 100 mm dia including laying in proper grade and and Paise Seventy

joining complete etc as per details specification . Three Only

[32] 1004.00 White washing with lime on wall surface (two coats) to give an 12.70 Rupees Twelve and Sqm

even shade including thoroughly booming the surface to remove Paise Seventy Only

all dirt, dust; mortar drops and other foreign matter.

[33] 1186.00 Providing and laying - Fitter Media 600mm thick directed at the 1239.35 Rupees One Sqm

back ofabutments, returns and wing walls as per detailed Thousand Two

specifications. Hundred Thirty

Thirty Five Only

[34] 30.00 Supplying and fixing reinforced concrete heavy duty non pres- 3469.26 Rupees Three Rmt

sure pipes with collars for culverts incl. Setting and joining Thousand Four

the pipes in C.M. 1:2 watering & laying (two level or slope ) of Hundred Sixty Nine

900mm dia. NP3 pipe internal diametre of IS 458 / 1971 and Paise Twenty

[35] 80.00 Provinding and filling sand below R.C.C. raft in layers including 467.68 Rupees Four Cum

ramming and watering complete. Hundred Sixty

Seven and Paise

Sixty Eight Only

[36] 283.00 Finishing wall with weather proof exterior emulsion paint on 120.26 Rupees One Sqm

wall surface (two coats) to give an required shape even shade Hundred Twenty

after thoroughly brushing the surface to remove all and Paise Twenty

Quantities Estimated Rates

Item estimated but Total Amount According

Item estimated but Total Amount According

Item of work Unit

No. may be more to Estimated Quantities

or less In Figure In Words

[37] 1041.87 Providing laying and rolling 25 mm thick open graded premixed 2762.35 Rupees Two MT

bitumineous carpet with B.T. aggregate as specified and using Thousand Seven

bitumen grade VG-30 bitumen for mixing with agreegate at the Hundred Sixty Two

rate of 3.36 % i.e 33.60 kg/M.T. of total mix & for tack coat using and Paise Thirty

Bitumen emulsion RS1 at 2.5 kg/10 sq.mt. including heating and Five Only

mixing in drum mix plant and spreading the same with paver

finisher and consolidation with power roller including necessary

firewood, oil, lubricants, labour charges etc. using contractor's

own drum mix plant and equipment, tool etc. completed in

accordance with the requirement of specification.

[38] 541.23 Providing and laying sealcoat with B.T. agreegate as specified 3517.83 Rupees Three MT

using agreegate at the rate of 0.18 Cu.mt / 10 Sq.M. and bitumen Thousand Five

grade VG-30 for mixing with agreegate at the rate of 4.50 % i.e Hundred Seventeen

45 Kg/M.T. of total mix including heating and mixing in drum and Paise Eighty

mix plant and spreading the same with paver finisher and Three Only

consolidation with vibratory roller including necessary

firewood, oil, lubricants, labour charges using contractor's own

drum mix plant machineries and equipment, tools etc. complete

in accordance with the requirement of specification.

[39] 16.00 Cautionary Warning Sign :-Providing and fixing sign boards 3808.66 Rupees Three No

made out of 2mm aluminium sheet / 4mm ACP (Aluminum Thousand Eight

composite Panel); size 90 x 90 x 90 cms. equilateral triangle as Hundred Eight and

per design of IRC-67-2012. Pre treated with phospheting Paise Sixty Six Only

process & acid etching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint ;reflectorised with

Micro Prismatic Grade retro refiective sheeting of Type-11 as

per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long

stand post of 75 x 75 x 6mm as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends. The details

of symbol for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC block of

size 45 x 45 x 60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Engineering Grade

[40] 8.00 Regulatory / Mandatory Sign :-Providing and fixing sign boards 3439.81 Rupees Three No

made out of 2mm aluminium sheet / 4mm ACP (Aluminum Thousand Four

composite Panel); size 60 cms Dia Circle as per design of IRC-67- Hundred Thirty

2012. Pre reated with phospheting process & acid etching; Nine and Paise

coated with one coat of epoxy primer and two coats of best Eighty One Only

quality epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x

6mm as required and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings

in black and white bends. The details of symbol foreach board

shall be as per theinstruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 10 years for

the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third

party test lab for the product offered shall be submitted by

contractor. (A) Engineering Grade (VR)

Quantities Estimated Rates

Item estimated but Total Amount According

Item estimated but Total Amount According

Item of work Unit

No. may be more to Estimated Quantities

or less In Figure In Words

[41] 4.00 STOP Sign :-Providing and fixing sign boards made out of 2mm 4676.06 Rupees Four No

aluminium sheet / 4mm ACP (Aluminum composite Panel); size Thousand Six

90 cms Octagone as per design of IRC-67- 2012. Pre treated with Hundred Seventy

phospheting process & acid etching; coated with one coat of Six and Paise Six

epoxy primer and two coats of best quality epoxy paint Only

;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type- 11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x 6mm

as required and frame fabricated from suitable size iron angle of

35 x 35 x 3mm; painted with bestquality epoxy coatings in black

and white bends. The details of symbol foreach board shall be as

per theinstruction of engineer in charge. The fixing at site shall

be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 10 years for

the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third

party test lab for the product offered shall be submitted by

contractor. (A) Engineering Grade (VR)

[42] 22.00 Hazard Marker Sign :-Providing and fixing sign boards made out 2423.74 Rupees Two No

of 2.0 mm aluminium sheet / 4 mm ACP (Aluminum composite Thousand Four

Panel); size 90x30 cms. rectangular as per design of IRC-67- Hundred Twenty

2012. Pre treated with phospheting process & acid etching; Three and Paise

coated with one coat of epoxy primer and two coats of best Seventy Four Only

quality epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 1.8mtr long stand post of 75 x 75 x

6mm as required and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings

in black and white bends. The details of symbol foreach board

shall be as per theinstruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 10 years for

the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third

party test lab for the product offered shall be submitted by

contractor. (A) Engineering Grade (VR)

[43] 2.00 Village Name Sign :-Providing and fixing sign boards made out 5045.36 Rupees Five No

of 2mm aluminium sheet/ 4mm ACP (Aluminum composite Thousand Forty Five

Panel); size 90x60 cms. rectangular as per design of IRC-67- and Paise Thirty Six

2012. Pre treated with phospheting process & acid etching; Only

coated with one coat of epoxy primer and two coats of best

quality epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 3.3mtr long stand post of 75 x 75 x

6mm as required and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings

in black and white bends. The details of symbol or

inscription/letters / numerals for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a certified copy

of 3 year outdoor exposure test report from third party test lab

for the product offered shall be submitted by contractor. (A)

Engineering Grade (VR)

[44] 75.00 Supplying and fixing reinforced concrete heavy duty non pres- 6621.26 Rupees Six Cum

sure pipes with collars for culverts incl. Setting and joining the Thousand Six

pipes in C.M. 1:2 watering & laying (two level or slope ) of Hundred Twenty

1200mm dia. NP4 pipe internal diametre of IS 458 / 1971 One and Paise

Twenty Six Only

Quantities Estimated Rates

Item estimated but Total Amount According

Item estimated but Total Amount According

Item of work Unit

No. may be more to Estimated Quantities

or less In Figure In Words

[45] 75.00 Providing and laying rubbles for Apron (Each stone weighing 1066.42 Rupees One Cum

not less than 40kg) including and packing and filling in the Thousand Sixty Six

interstices with quarry spall. and Paise Forty Two

[46] 195.00 Providing and casting in situ controlled Cumcement concrete M - 4720.92 Rupees Four Cum

250 for R.C.C. raft and cut-off walls including necessary Thousand Seven

shuttering , laying , vibrating,ramming and curing complete. Hundred Twenty

and Paise Ninety

[47] 540.00 Providing and casting in situ controlled cement concrete M - 200 5222.12 Rupees Five Cum

for R.C.C.return as per drawing including centering, shuttering, Thousand Two

scaffolding where necessary laying, vibrating, curing and Hundred Twenty

finishing complete (A) Height from 0.00 to 5.0 Mt (1) Piers (2) Two and Paise

Abutments (3) R.C.C. Return. Twelve Only

[48] 135.00 Providing and casting in situ controlled cement concrete M - 250 5452.98 Rupees Five Cum

for R.C.C. solid slab including centering, scaffolding curing and Thousand Four

finishing complete. Hundred Fifty Two

and Paise Ninety

[49] 25.00 Providing and casting in situ controlledcement concrete M - 250 5401.06 Rupees Five Cum

for average 100mm thick wearing coat laid asdirected including Thousand Four

tamping, vibrating,curing and finishing , curing and fillingjoints Hundred One and

with bitumen complete. ( Up to10 Ton). Paise Six Only

[50] 46.00 Providing and laying in position FE 500D TMT bar 73858.69 Rupees Seventy MT

reinforcement including cutting, bending, hooking and tying Three Thousand

complete as per detailed drawings for the following.(A) Piers (B) Eight Hundred Fifty

Abutments(C) R.C.C. Returns Eight and Paise

Sixty Nine Only

[51] 115.00 Provision of an Reinforced cement concrete crash barrier at the 8852.65 Rupees Eight Cum

edges of the road, approaches to bridge structures and medians, Thousand Eight

constructed with M-25 grade concrete with Fe-500D Hundred Fifty Two

reinforcement with epoxy coating conforming to IRC:21 and and Paise Sixty Five

dowel bars 25 mm dia, 450 mm long at expansion joints filled Only

with pre-moulded asphalt filler board, keyed to the structure on

which it is built and installed as per design given in the

enclosure to MOST circular No. RW/NH -33022/1/94-DO III

dated 24 June 1994 as per dimensions in the approved drawing

and at locations directed by the Engineer, all as specified as per

drawing attached.

[52] 18.00 Providing Pre-moulded asphalt filler joints as per drawings.(A) 703.53 Rupees Seven Sqm

12mm Hundred Three and

Paise Fifty Three

Rupees Five Crores Six Lakhs Forty One Thousand Four Hundred Sixty Three and Paise Fifty Six Only

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of the estimated rate mentioned

above. Amount of my /our tender works out as under.

Estimated Amount put to tender Estimated Amount put to tender

In Words In Words

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R.

therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate

of input rate mentioned in all the tender.

5. Credit of materials of Diversion & CD Work amount of Rs. 46474.22 must be recovered from Contractor's 1st R.A Bill.

Dated Signature Divisional Accounts officer Deputy Executive Engineer Executive Engineer

the Contractor. R & B (P) Division R & B (P) Sub Division R & B (P) Division

Mahisagar Balasinor Mahisagar