Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹6.0 L+₹10,584.35 (1.80%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹6.3 L+₹38,575.15 (6.55%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹6.3 L+₹41,890.55 (7.11%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹6.4 L+₹46,568.85 (7.91%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹10.2 L
EMD Value
₹20,400
Closing Date
20 Sept 2021, 6:00 pmClosed
GE(KH)YOL
GE(KH)YOL
PROVISION OF WASH BASIN WITH MIRRORS IN BLOCK NO. P-17 TO P-20 AND P-29 IN MD ACCN AND ADDITION ALTERATION IN CERTAIN TILING WORK IN FIRST FLOOR OF BATHROOMS IN BUILDING No. P-4 ,P-6 TO P-8 UNDER AGE B/R-1 AT GEKHYOL
2021_MES_470273_1
GE/Y-26/2021-22
Open Tender
Civil Works
Item Rate
183 days
YOL CANTT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE(KH)YOL
₹20,400
Yes
25 Oct 2021
24 Aug 2021
22 Sept 2021
24 Aug 2021
20 Sept 2021
7 Sept 2021
Amount
SCHEDULE 'A' PART-I :- Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing), removing and rubbish of the premises, complete all as specified.
Taking down cement plaster on brick or stone surfaces and tiles with bedding etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified.
Taking up or down 15mm bore, steel tubing and connections, including cleaning for refixing or removal from site, all as specified.
Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal from site, all as specified.
Demolition of cement concrete (unreinforced) in ground floors and paving, not exceeding 15cm thickness (below or above ground level), un-reinforced, complete all as specified.
Non skid, Premium class I grade, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.06Sqm but not exc. 0.11 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) complete, all as specified.
Glazed coloured tiles of size 350x250/450x350x7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with coloured cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand) complete, all as specified.
Glazed coloured tiles of size 300x200x7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with coloured cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand) complete, all as specified.
Rendering cement plaster 15mm thick in cement mortar 1:6 (1 cement : 6 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on other than fair faces of brick wall or on stone masonry surfaces, surface finished even and smooth without using extra cement, all as specified.
Rendering cement plaster 10mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on ceiling, surface finished even and smooth without using extra cement, all as specified.
Three coats of white wash on newly plastered or un plastered, previously undecorated wall surfaces including preparation of surfaces complete, all as specified.
Three coats of white wash on newly plastered or un plastered, previously undecorated ceiling surfaces including preparation of surfaces complete, all as specified.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls, complete all as specified.
Mild steel galvanized iron water tubing 15mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed.
All as per item No. but "except GI tubing" for 15mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc . Fixed to wall or ceiling or laid in floor complete, all as specified and directed.
Mild steel galvanized iron water tubing 20mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed.
All as per item No. but "except GI tubing" for 20mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc . Fixed to wall or ceiling or laid in floor complete, all as specified and directed.
Plain cement concrete M-7.5, nominal mix, D-2, using 40mm graded mechanically crushed stone aggregate as in foundation, filling and mass concrete, as in sub base layer under floors, sunken floor, all as specified.
75mm thick Plain cement concrete M-7.5 nominal mix, D-2, using 40mm graded mechanically crushed stone aggregate as in sub base complete all as specified.
Plain cement concrete M-15, nominal mix, type B-0, using 12.5mm graded mechanically crushed stone aggregate as in floors, 25mm thick, surface finished even and fair to receive top surface, all as specified.
Supply and fixed in repair PVC valveless, syphonic action type flushing cistern 10 litres capacity low level with inlet, ball valve , float and handle with brackets including 32mm dia PVC long bend flush pipe 90cm long snd 15mm dia PVC connection 600mm with CP brass coupling nuts and PVC washers at both ends , fixed complete , all as specified.
Vitreous China wash down water closet (pedestal pattern), coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover and chromium plated jet including 15mm dia PVC connection 600mm with CP brass coupling nuts and PVC washers at both ends , fixed complete ,including PVC valveless, syphonic action type flushing cistern 10 litres capacity low level with inlet, ball valve , float and handle with brackets with including 32mm dia PVC long bend flush pipe 90cm long pipe , fixed complete all as specified.
Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with PVC ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified,including PVC valveless, syphonic action type flushing cistern 10 litres capacity low level with inlet, ball valve , float and handle with brackets with PVC 32mm dia flushing pipe, anti-syphonage pipe , fixed complete , all as specified.
Vitreous China bowl Urinal, flat back 465x355x265mm ,white ( white (minimum) with grating and union for discharge pipe, complete including providing and fixing plugs, beding urinal against wall in cement mortar 1:2 securing urinal plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm bore PVC waste pipe, complete all as specified.
Cast iron floor trap, with grating including jointing to waste pipe fixed in repairs cement concrete type B-1 (1:2:4)dia of outlet 75mm, all as specified.
100mm bore, Cast iron soil, waste and vent pipes (sand cast pipe), in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified.
100mm bore, Cast iron soil, waste and vent pipes (sand cast pipe), in any length with or without ears, with cement joints, fixed to wall, complete all as specified.
75mm bore, Cast iron soil, waste and vent pipes (sand cast pipe), in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified.
75mm bore, Cast iron soil, waste and vent pipes (sand cast pipe), in any length with or without ears, with cement joints, fixed to wall, complete all as specified.
Cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) 100mm bore with ovel access door, all as specified.
Cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) 75mm bore with ovel access door, all as specified.
Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 100mm bore with ovel access door, all as specified.
Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 75mm bore with ovel access door, all as specified.
Angle valve/ Stop valve , cast copper alloy, chromium plated, screwed down ,high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repair complete, all as specified.
Bib taps, fancy type CP 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, chromium plated screwed for iron pipe or for brass ferrule and fixed in repair , all as specified
Wash basins, Vitreous China (Flat back type) size 550mmx400mm, crystal white with and including cutting for and pinning on ends of brackets, 450 mm long PVC connections 15mm size with CP brass coupling nuts at both ends, waste pipe of polythylene of low or high density or PVC of 32mm dia including Pillar taps fancy type, 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, 32mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, screwed for iron pipe and fixed , complete all as specified.
Stop Valve Fancy type , cast copper alloy, chromium plated, screwed down ,high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed complete, all as specified.
Cutting existing steel tubing 15 mm bore for alterations or additions (Each cut measured) if necessarily done in position without taking down complete all as specified.
Cutting holes for pipe into or through brick walls built in cement mortar Superficial area N exc 150 sq. cm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required all as specified.
Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified
jatindera enterprises
VIJAY KUMAR LAKHNI
M/S VIG AND COMPANY
gani bhatti and co
KISHAN CONTRACTOR
ASHOK KUMAR JAIN
Eshaan Construction Co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .