Annual Plan-Project No S0310/24. Alappuzha JP-2023- 24.-Providing Public addressing system to gender park Alappuzha-General Electrical Work

Amount

OD412617/2023-2024:Supply ,installation, testing & commissioning of Two Zone PA mixer amplifier with 200w+ 200w RMS power out put, minimum 6 mic inputs,2 Aux, bass & treble controls, Frequency response .50-15000Hz,4 ohm ,8 ohm, 70v & 100v speaker out puts for each zone and including necessary cables and connectors. Ahuja TZA- 4000 EM /equivalent.

OD412628/2023-2024: SITC of two way 100w speaker that combines two 12 inch full range dual cone speaker and a piezo horn tweeter having frequency response 55 Hz-20 KHz nominal impedence 8 ohm, input connectors: 1/4 inch phone jack +terminal strip. AHUJA SRX 120 DXM/ equivalent.

OD412641/2023-2024:Supply & installation of wall mount speaker stand and it's bracket with all accessories .Ahuja AWB-30 / leading brand having mirror features.

OD412644/2023-2024:Supply & testing PA dynamic microphone having frequency response 50 -16000 Hz, sensitivity 2mV/pa & with quick detachable holder with 3 pin XLR connector & 10 mtrs, twin core shielded low noise cable .Ahuja ASM-780 XLR/ equivalent

OD412653/2023-2024:Supply of microphone table stand having sturdy mechanism ensuring trouble free movement & positioning of microphone with base dia. 150mm height 350/530 mm. Ahuja DGT or equivalent.

OD412659/2023-2024:Supply of microphone floor stand having sturdy mechanism ensuring trouble free movement & positioning of microphone with base dia. 230mm ,height 920-1500mm. Ahuja DGN/equivalent.

OD412657/2023-2024:SIT & C of dual PA UHF wireless microphone having 50Hz to 16KHz frequency response, dual channel non diversity receiver, cardioid hand mic & display on transmitter and receiver for frequency indication. Studio master XR 40HH 0r equivalent.

OD412661/2023-2024:SIT &C of 8 channel mixer with built in MP3 digital player having two balanced XLR microphone in puts with switchable +48 V phantom supply ,frequency response: 25Hz-20KHz, equalization bass/treble plus or minus 15DB at 80 Hz /plus or minus 15DB at 12KHz,out put impedence 600ohm ,delay range varible from 20 to 300ms ,S/N ratio: less than 68db. Ahuja FMX-108DP/equivalent.

OD412532/2023-2024:Supply & fixing 16GB pendrive in position as required.

OD412531/2023-2024:Supply & fixing floor rack for keeping amplifier & other hard ware with sufficient nos trays ,AC distribution box with power distribution unit to provide power supply to system and all necessary accessories.

OD412533/2023-2024:Supply & laying good quality mic cable necessary XLR/phono connectors in the existing surface/recess conduit as required including giving connections .make Belden /MX/equivalent.

90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm

1.17.2:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

OD412537/2023-2024:Supply & providing 12x3 mm brass bolt & nut with washers on the existing MS box/earth bus etc. as required including drilling holes as required.

OD412539/2023-2024:Supply & laying 20mm dia. flexible PVC conduit in position as required.

OD412540/2023-2024:Supply & providing 2.5mm thick Elastomeric fire retardent insulating mat as per IS 15652/2006 to with stand 11KV dielectric strength.

OD412545/2023-2024:Painting letters/figures of the following sizes with enamel paint as identification mark to SB,DB,panel board etc. as required. 2.5x4 cm. size

1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

90.10.3.23:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )16A 3 pin plug top

90.10.3.22:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )6A 3 pin plug top

1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

Bidder Name

SAK PRO AUDIO