ARC work of Attend the cable fault at site within 03 HRS from receiving the message from D.E OF concern S/DN AND Locating the Fault underground Cable for ALL scheme in the jurisdiction of Sayan S/dn of KIM Division. Through outsourced agency for existing DGVCL Network for SDN under Kim Division.

ARC work of Attend the cable fault at site within 03 HRS from receiving the message from

D.E OF concern S/DN AND Locating the Fault underground Cable for ALL scheme in the

jurisdiction of Sayan S/dn of KIM Division.

Item Code No. Description Unit Rate Amount

Labour charge for excavation of cable trench of Meter

400mm width x 1200mm depth, in any type of soil

1 9925000001 for laying of cable of size up to 240 mm2 (For

additional cable 200 mm additional width shall be

considered i.e. half trench length is to be considered

Labour charge for excavation of cable trench of Meter

600mm width x 1200mm depth, in any type of soil

2 9925000002 for laying of cable of size up to 240 mm2 (For

additional cable 200 mm additional width shall be

considered i.e. half trench length is to be considered

Labour charge for excavation of cable trench of Meter

400mm width x 1500mm depth, in any type of soil

for laying of cable of size up to 240 mm2 (For

additional cable 200 mm additional width shall be

considered i.e. half trench leng th is to be

Labour charge for laying of 11kV / 22 kV XLPE Meter

Cable of size up to 240 mm2 & preparation of sand

layer 100mm thick, in the cable trench & covering

the cable with 150 mm dia (Outer), thickness

mm, 1.0 meter long RCC half round muffs and

providing and fixing of 4inch width yellow colour

4 9925000004 polyethylene tape with printing"CAUTION

ELECTRIC CABLE BELOW' at 0.75 m depth from

ground surface after laying cable in trench. This will

provide indication that electric cable is passing

underground so as to protect cable from mechanical

injuries, refilling the same, as per Instruction of E

gineer in Charge (EIC) .

File No: DGVCLDOKI/TEN/e-file/6817/2026/0590/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0034/02/2026 Approved Date: 02-02-2026

Labour charge for horizontal drilling using Auger Meter

machine without damage to surface road at max

mtrs depth & putting of 6.11 kg/cm2 , class-4,Green

color, 110mm 0.D. 8.5mm thickness H.D.P.E. pipe

confirms to IS 4984-1987(3rd revision) and BIS

certification and laying of 11KV/22KV XLPE cable of

size up to 240 mm2 in HDPE pipe, as per Site

Condition (excluding cost of pipe). The detail map

obtained from HDD machine and excel sheet hard

and soft copy) indicating the respective depth and

distance from adjacent landmark for each segment

for HDD is must require to be submitted. HDD to be

carried out at depth 1.5 mtrs to 2.0 mtrs as per site

conditions and as er instruction of EIC.

Labour charge for horizontal drilling manually without Meter

damage to surface road at max 2.0 mtrs depth &

putting of 6.11 kg/cm2 , class-4,Green color, 110mm

O.D. , 8.5mm thickness H.D.P.E. pipe confirms to IS

4984-1987(3rd revision) and BIS certification and

laying of 11KV/22KV XLPE cable of size up to

6 9925000006 mm2 size, as per Site Condition (excluding cost of

pipe). The detail map and excel sheet (hard and soft

copy) indicating the respective depth and distance

from adjacent landmark for each segment of cable to

be submitted. Drilling to be carried out at depth

Minimum 1.2 mtrs to 2.0 mtrs as per site conditions

as per instruction of EIC.

Supply of 6.11kg/cm2 , class-4,Green color, 110mm Meter

O.D. , 8.5 mm thickness H.D.P.E. pipe confirms to

7 9925000007 IS 4984 and BIS certification for laying of

underground 11KV/ 22KV XLPE cable up to 240 mm

Labour work for RCC concreting on disputed CMT

location and repairing of damage portion of road

8 9925000008 crossing for the work carried out for roads crossing

as well as concreting & muffing of poles including all

Providing & fixing concrete stone route marker of No

300 mm width x 150 mm thick x 650 mm height

embedded in earth at least 300 mm below &

mm above ground level respectively at distance

approx. 50 meters along the length of cable. The

RCC concreting (1:2:4)(all necessary materials

will be in bidder's scope) of route marker is to be

carried out 300 mm width x 150 mm thick x 300 mm

9 9925000009 below ground level as per instruction of EIC. The

route marker should be with name of company with

approved yellow colour-DGVCL. The distance from

marker to cable and cable depth with feeder name

etc., marked with arrow sign is to be painted on it.

The route marker is to be fixed at location near to

any fixed permanent location (not necessary to fix

exact on top of cable) as per instruction of EIC.

File No: DGVCLDOKI/TEN/e-file/6817/2026/0590/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0034/02/2026 Approved Date: 02-02-2026

Labour charge for erecting of 11kV / 22 kV XLPE perJob

cable of size up to 240 mm 2 on DP Structure with

10 9925000014 fixing of 02 Nos polymer cleats on top and middle

part. Polymer cleats, nut bolts etc. fixing material to

be provided by contractor.

Providing & fixing of 6.11kg/cm2 , class4,Green perJob

color, 110mm O.D. 8.5mm thickness H.D.P.E. pipe

confirms to IS 4984 and BIS certification on the

erected DP structure for the mechanical protection

of cable by inserting the cable inside HDPE pipe.

11 9925000015 The HDPE pipe shall be erected in such a way that

300mm shall be below the ground level and the rest

2700 mm shall be supported on the DP Structure

with 01 No Polymer cleat. All materials including

polymer cleat and Nut bolt to be provided by

Providing and fixing of pipe type earthing from 80 No

mm dia class-B GI pipe with pit to be filled with salt

& coke and construction of chamber as per DGVCL

1 9925000016 Drg. No. dg /100 for DP and cable. The earthing pit

should be joined with cable by G.I. strip of size 1"

width & 2 mm thick. All material GI pipe, Coke Salt

etc will be supplied by bidder.

Supply & fixing of heat shrink type end terminations No

1 9925000017 (outdoor) for up to 11kV 3C x 185 mm2 size XLPE

cable as per DGVCL technical s ecification

Supply & fixing of heat & shrinkable end No

terminations (outdoor) for up to 22 kV 3C x 185 mm

2 size XLPE cable ( as per DGVCL technical

Supply & fixing of heat shrinkable type end No

terminations (indoor) for up to 11kV 3C x 185 mm

size XLPE cable as per DGVCL technical

Supply & fixing of heat & shrinkable end No

9925000020 terminations (indoor) for up to 22 kV 3C x 185 mm

size XLPE cable as per DGVCL technical

Supply & fixing of heat shrinkable straight through No

5 9925000021 joint for up to 11kV 3C x 185 mm 2 size XLPE

cables as per DGVCL technical specification.

Supply & fixing of heat shrinkable straight through No

6 9925000022 joint type for up to 22kV 3C x 185 mm 2 size XLPE

cable as per DGVCL technical specification

Labour charge for excavation of 2100mm long x No

1200mm wide x 1200 mm deep joint pits for

installation of 11kV / 22kV Straight through joints as

7 9925000023 per instruction of engineer-in-charge & covering the

cable with 150 mm dia (Outer), thickness 25 mm,

1.0 meter long RCC half round muffs & refilling

same as per instruction of EIC .

File No: DGVCLDOKI/TEN/e-file/6817/2026/0590/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0034/02/2026 Approved Date: 02-02-2026

Providing and fixing of insulating bus bar, made from No

11KV/22KV XLPE cable after removal of semi

conducting layer and applying of PVC heat

shrinkable antitracking core insulating tubing

(1.1KV), on both end terminal using Aluminium long

barrel heavy duty up to 240 sq mm lugs, Aluminium

bus connector. Taping with PGclamp for bus

conductor as per drawing and as per instruction of

EIC. The Allurninium lugs and PG clamp shall be

covered with 11KV/22KV HT insulating tapes.

(11KV/22KV XLPE cable will be in scope of DGVCL

while all other materials will be in bidder's scope.

Testing of cable at various points and No

commissioning the feeder as per instruction of

engineer-in-charge.Test result shall be submitted by

contractor with bill.

Preparation and submission of 6 (six) copies, of Set

complete layout drawings with GIS mapping as per

actual cable routing showing road crossing, HDPE

pipe sleeving, jointing locations, markers etc.

To Attend the cable fault at site within 03 hrs from No

9 9925000047 receiving the message from D.E of concern S/dn

and locating the fault under ground cable.

TOTAL AMOUNT :-Twenty Lacs Only 20,00,000/-

TOTAL AMOUNT :-Twenty Lacs Only 20,00,000/-

Executive Engineer

DGVCL, KIM IND DIVISION.

File No: DGVCLDOKI/TEN/e-file/6817/2026/0590/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI