Karnataka

Active

Works

Buildings

Construction of New KNNL KPC Division No.1 office building at Bidar

Karnataka Neeravari Nigam Limited

KNNL Division KPC Div No 1 Bidar | Kalaburagi, Karnataka

Amount: ₹84.7 LCloses: 4 Jul 20267d left

Tender Value

₹84.7 L

EMD Value

₹1.7 L

Closing Date

4 Jul 2026, 9:30 pm7d left

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Karnataka Neeravari Nigam Limited

Work Description

Construction of New KNNL KPC Division No.1 office building at Bidar

Tender Information

Tender ID

307764

Reference Number

KNNL/2026-27/BD/WORK_INDENT4551

Tender Type

Open

Product Category

Buildings

Location

KNNL Division KPC Div No 1 Bidar

Source Website

Subscribe to view

Documents Required

12 documents required · 12 mandatory

Technical Bid

RequiredThe requisite EMD in electronic cash

RequiredEmployees Provident fund EPF Registration certificate with latest paid challans

RequiredCopy of the latest income tax return filed for Assessment year 2025-26 that is FY-2024-25

RequiredA copy of GST Registration certificate

RequiredLiquid assets and availability of credit facilities of not less than 30percent of the amount put to tender Rs.25.42 lakhs Excluding GST Credit lines or Letters of credit or Certificates from Banks for meeting the fund requirement etc and mentioning valid e-mail id phone no. Compulsorily The contractor should upload necessary documents issued by the Banks

RequiredThe intending bidder should have achieved Turnover in at least two financial years during last five financial Years 2021 22 to 2025 26 169.48 lakhs of not less than twice the amount put to tender reckoned back from 2021 22 duly updating the financial turnover at 10percent per annum this is to be certified by the charted accountant. mentioning UDIN and Balance sheet copy enclosed

RequiredTenderers who meet the above specified minimum qualifying criteria will only be qualified if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Bid Capacity Assessed available tender capacity equals to A N X1.5 -B Where A Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress.

RequiredThe Tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification work and should have executed similar electrical works totaling Rs.15.82lakhs

RequiredA copy of KPWD Civil class III and above Registration certificate and its validity period

RequiredThe intending bidder should have satisfactorily completed at least one similar nature of work that is Construction of Building in the last five years 2021-22 to 2025-26 to an extent of 50percent of the cost of the Amount Put to Tender Rs.42.37 lakhs The work done should be issued by an officer not below the rank of Executive Engineer of the concerned Division or equivalent Officer.

RequiredThe intending Bidder should have executed the following minimum quantities of the work or items usually 80percent of the peak annual rate of construction during any one year of the last 5 financial years 2021-22 to 2025-26 The necessary work done certificate should be obtained from the Officer not below the rank of Executive Engineer of the concerned Division or Equivalent Officer1.Excavation& Embankment Combined 377.562 cum Further continued as per notification

RequiredThe Tenderer or his identified sub contractor should possess required valid Water supply or Sanitary engineering works license for executing building Water supply or Sanitary engineering works and should have executed similar Water supply or Sanitary engineering works totaling Rs.1.38 lakhs Usually not less than 50 percentage of the electrical works in any one year of the last 5 financial years i.e.2021-22 to 2025-26

Eligibility Criteria

The intending bidders are advised to visit the site of work before submitting their tenders

The necessary certificates / documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached to e-tender document. The Original certificates/documents shall be produced on or before stipulated date and time for verification. Scanned signature of the bidder/authorized representative of the bidder shall be attached while uploading bid document

If any of the dates mentioned above happen to be a general holiday, the next working day holds good.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

If the percentage quoted by contractor for the work is below Ninety percent (90%) of the amount put to tender (updated cost as per CSR) then the successful contractor shall furnish an additional performance security in the form of bank guarantee for an amount equivalent to the difference between the cost as per quoted percentage and Ninety percent (90%) of the amount put to tender (updated cost as per CSR) before executing the agreement. In case of contractor quoting the percentage above One Hundred and Twenty five percent (125%) of the amount put to tender (updated cost as per CSR) then the amount over and above One Hundred and Twenty five percent (125%) of the amount put to tender (updated cost as per CSR) will be withheld during the progress of work. The additional performance security furnished in the former case/withheld amount in the later case will be released only after the entire work entrusted is fully completed and so certified by the Executive Engineer.

Conditional tenders are liable to be rejected. The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever.

Corrigendum will be published in web site for all modifications/corrections if any.

Maintenance period or the defect liability period for this work is one year from the date of completion of work.

Tendering by the joint venture will not be allowed

The contractor should furnish the name of the individual firm with address and Telephone numbers with place of registration, year of incorporation etc.

Royalty on construction materials and other taxes will be deducted as per prevailing Government orders.

No quarries are approved by KNNL for materials. The quarries considered are for the estimate purpose only. The intending bidders shall visit the site, identify the quarries, ascertain availability for the quantity and quality of the materials required for the work and shall quote his rates accordingly. No extra claim whatsoever will be entertained in this regard.

On account of restrictions on sand mining and scarcity of availability of sand, as an alternative the use of manufactured sand (M sand) may be allowed during the execution of work at no cost/implication with the written approval from the competent authority.

The rates includes all leads and lifts and work shall be carried out as per the instruction of Engineer-in-charge All specifications are as per relevant IS codes in vogue and Indian Road Congress. The rates for the specification in the Schedule B includes all lead and lifts irrespective of the distance and height, no extra claim will be entertained for additional lead and lifts.

The contractor should note that, the land required for the work shall be at his personal responsibility till the completion of work.

The intending Bidders should note that, if any part or whole of land required for the work is not yet acquired by the KNNL it shall be the responsibility of the contractor to procure possession of such land by consent by the land owner before commencement of work at no extra cost to KNNL and no claim whatsoever relating to non-availability of land would be entertained

The intending bidder should note that, as the tender invited is on percentage basis, if the bid amount based on the percentage quoted by the contractor is less than the amount put to tender, the contractor shall submit the additional performance security for an amount equal to the difference between the amount put to tender and quoted amount in the form of FDR as per security deposit clause mentioned in the tender document. In case of contractor quotes the rates above 110% of the estimated rates, then the amount over and above 110% will be withheld during the progress of work. The additional performance security will be released proportionately to the bill amount till the contractor achieves progress of entire work as per agreement

Within 20 Days of Receipt of the Letter of Acceptance the Successful tenderer shall deliver to the Employer a Security Deposit in any Of the Forms Given Below for An Amount Equivalent To 5 percentage Of the Contract Price Plus Additional Performance Security deposit for an amount equivalent to difference between quoted amount and estimated amount put to tender for Unbalanced Tenders FDR/Bankers Cheque /Pay Order in Favour of the Executive Engineer KNNL KPC Division No 01 Bidar. Specified Small Savings Instruments Pledged to the Executive Engineer KNNL KPC Division No 01 Bidar 1 percentage labour cess as per provision of building and the construction works welfare act 1996 will recover from each running bill of the contractor

The representative of the contractor who will attend for opening of tender should bring the authorization letter from the concerned contractor.

The validity period of EMD shall be for a minimum period of 180 days from the date of opening of the tenders.

EMD of the unsuccessful bidders will be refunded only after the acceptance of tenders by the competent authority (clause 21 of the Formal Tender Notice)

EMD amount and Amount put to tender will be as mentioned in the e-portal.

The Earnest Money Deposit. (E cash). The Earnest Money Deposit of Lowest bidder will be transferred to CAO, KNNL, and Account Dharwad and will be converted into security deposit and same will be refunded after maintenance period of the work

The proposed methodology and program of construction, backed with equipment planning and deployment, duly supported with broad calculation and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specification within the stipulated period of completion as per milestones

In view of introduction of GST from 01.07.2017, in the NIT and Bid Document, the following stipulation shall be incorporated

The estimates are prepared based on the common SR 2023 24 continued 2024 25 and 18percent added to the estimated amounts as mentioned in SR. The estimated amount put to tender for the work is exclusive of GST. The contractor should bid based on the estimated amount put to tender (excluding GST but including all other charges as applicable. GST shall be paid to the tendered amount separately. Further the increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.

COVER-II shall contain the financial bid in the Schedule B

The Cover-I (Technical bid) will be opened first and there after Cover-II (Financial bid) of only those bidders who fulfill the stipulated conditions in Cover-I, will be opened.

Issue and submission of tender documents will be as under

The aspiring bidders who have not previously obtained the user ID and Password for participating in e-tendering may now obtain the same by requesting the e-governance office, M.S. Building, Bangalore during office hours

The Contractor can pay the earnest money deposit (EMD) in e-procurement portal using any mode of payment such as Credit Card / National electronic fund transfer (NEFT) Over the counter (OTC).

To retain the EMD amount submitted in cash through E-procurement portal till the completion of tender procedure and after signing of the agreement, transfer the e-cash EMD of the successful bidders to KNNL Account.

The tender inviting authority would release EMD in cash through E-proc against Bank guarantee for similar amount.

To adopt such procedure in respect of all pending E-cash EMDs.

The necessary certificates / documents in support of fulfilling Clause 1.1 as stipulated shall be scanned and attached to e-tender document. Prior to awarding of work the Lowest -1 bidder should produce the original certificates / documents in support of the uploaded documents at the time of entering in to an agreement. If the L-1 bidder does not produce the original document for entering into an agreement then his bid can be treated as non-responsive bid as per Clause 26(4) of the KTPP Rules. The names of the bidder who does not produce the original documents can be removed from select list of KNNL enrolment and barred from participation in any of the tenders to be invited by KNNL apart from forfeiting the EMD paid through e-cash. Scanned signature of the bidder / authorized.

bids shall Representatives of the bidder shall be attached while uploading the bid document. The L1 bidder can be determined amongst the other responsive bidders.

In the case of the death of a contractor after executing the agreement/Commencement of the work, his legal heir, if an eligible registered contractor and willing can execute and completed the work at the accepted tenders rates irrespective of the cost of the work

As per updated circular of the senior Geologist, Department of Mines and Geology, Bengaluru, it is mandatory for contractors to obtain mineral material required for the work from the authorized agency/contractors having Mineral Dispatch permit (MDP) issued by Mines and Geology Department

Building operation and maintenance should be properly maintained and adhered in Defect and liability period.

Further information regarding the tenders please Contact https://kppp.karnataka.gov.in/or can be had from the office of the Executive Engineer, KNNL KPC, Division No-01, Bidar during office hours. Contact Phone. No 08482 226490

If any bidder fails to satisfy the conditions, such be rejected.

Technical Criteria

General

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Past Experience

The Tenderer or his identified sub contractor should possess required valid Water supply/Sanitary engineering works license for executing building Water supply/Sanitary engineering works and should have executed similar Water supply/Sanitary engineering works totaling Rs.1.38 lakhs (Usually not less than 50% of the electrical works ) in any one year of the last 5 financial years (i.e. 2021-22 to 2025-26)

Work Done Certificate

The Tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification work and should have executed similar electrical works totaling Rs.2.92lakhs (Usually not less than 50% of the electrical works ) in any one year.

Others -- Valid Electrical License

The intending Bidder should have executed the following minimum quantities of the work or items usually 80percent of the peak annual rate of construction) during any one year of the last 5 financial years 2021-22 to 2025-26 The necessary work done certificate should be obtained from the Officer not below the rank of Executive Engineer of the concerned Division or Equivalent Officer1.Excavation& Embankment Combined 377.562 cum 2.RCC and PCC Combined 151.86 cum 3.TMT Steel in Tonnes 10.313 4. Flooring in Sqm 237.24 5.BBM in Cum 89.91

Others -- Minimum Quantities Executed

The intending bidder should have satisfactorily completed at least one similar nature of work (i.e. Construction of Building) in the last five years (2021-22 to 2025-26) to an extent of 50% of the cost of the Amount Put to Tender (Rs.42.37 lakhs )The work done should be issued by an officer not below the rank of Executive Engineer of the concerned Division or equivalent Officer. The cost will be updated to the present value by giving a weight age of 10% per annum, if the work is completed prior to the year 2025-26

Work Done Certificate

Capabilities of Vendor

A copy of KPWD Civil class III and above Registration certificate and its validity period

PWD Registration Certificate (Class I/II/III/IV)

Others -- Valid Electrical License

Tenderers who meet the above specified minimum qualifying criteria will only be qualified if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Bid Capacity Assessed available tender capacity equals to A N X2.5 -B Where A Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value price level of existing commitments and ongoing works to be completed during the next years period of completion of the works for which Tenders are invited

Others -- Bid Capacity

Financial Status

Minimum financial turnover (civil engineering construction works) not less thantwo times the annual payments from this contract (Rs. 84.74 Lakhs)

Audited CA Certificate of Annual Turnover

The intending bidder should have achieved Turnover in at least two financial years during last five financial Years 2021 22 to 2025 26 84.74 lakhs of not less than the amount put to tender reckoned back from 2021 22 duly updating the financial turnover at 10percent per annum this is to be certified by the charted accountant. mentioning UDIN and Balance sheet copy enclosed

Audited CA Certificate of Annual Turnover

Employees Provident fund (EPF ) Registration certificate with latest paid challans

Valid EPF Certificate

Liquid assets and availability of credit facilities of not less than 30percent of the amount put to tender Rs.25.42 lakhs Excluding GST Credit lines or Letters of credit or Certificates from Banks for meeting the fund requirement etc and mentioning valid e-mail id phone no. Compulsorily The contractor should upload necessary documents issued by the Banks

Line of Credit

A copy of GST Registration certificate

GST Registration

Copy of the latest income tax return filed for Assessment year 2025-26(FY-2024-25)

ITR Filed Copy (Mentioning PAN)

Others

The requisite EMD in electronic cash

Others -- EMD Deposit

Fee & Financial Details

Tender Fee Amount

₹2,120

EMD Fee Amount

₹1.7 L

Important Dates

Last Activity

20 Jun 2026

Published

20 Jun 2026

Bid Opening

6 Jul 2026

Download Ends

26 Jun 2026

Pre-Bid Meeting

26 Jun 2026

BOQ Preview

•

Construction of New KNNL KPC Division No.1 office building at Bidar

•

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ...

•

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...

•

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. CSR 2023-2024,VOL-2 Page No-187/Item N...

•

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of E...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

•

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

•

Providing Size Stone masonry with hard stone in foundation & plinthwith Cement mortar 1:6 (1 cement : 6 coarse sand).Page No 9/ 5.4 vol 2 CSR-2023-24

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) in...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

•

Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per d...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Providing and fixing in position Mathi/Nandi wood fully panelled shutters for windows with stiles and rails of 35mm. thick, 75mm wide in two halves with panels of 25mm thick including cost of material...

•

Providing and fixing in position fully glazed shutters for ventilators side hung or central pivoted with Honne wood stiles and rails of 30mm thick 50mm wide and central divider of 30mm. wide, 3mm t...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gran...

•

Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...

•

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off co...

•

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever requi...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

•

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth c...

•

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior p...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

•

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

•

Providing 15 mm cement plaster on the rough side of single or halfbrick wall of mix 1:4 (1 cement: 4 fine sand) including rounding offcorners wherever required smooth rendering, providing and removing...

•

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

•

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

•

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...

•

Providing to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with ...

•

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, pla...

•

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fix...

•

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...

•

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

•

Providing and fixing ball valve (brass) of approved quality, High or low

•

pressure, with plastic floats complete :,Page No-17/13.5.1 CSR-2023-24.VOL-2

•

Providing and fixing C.P. brass bib cock of approved quality conforming

•

to IS:8931, Page No-119/13.12 CSR-2023-24.VOL-2

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

•

taps, 32 mm C.P. brass waste of standard pattern, including painting of

•

fittings and brackets, cutting and making good the...

•

Providing and fixing white vitreous china water closet squatting pan

•

(Indian type) 14.13.1 Long pattern W.C. pan of size 580 mmPage No-134/14.13.1,VOL-5 CSR-2023-24

•

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed

•

to wooden cleats with C.P. brass screws and washers comple...

•

Providing and fixing Towel rail 600mm length made of Stainless steel with all conce aled fitting arrangements & all necessary accesories complete - Class a Economy ..,Page No-144/14.89(a)VOL-5 CSR-202...

•

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories completePage No-127/13.59VOL-5 CSR-2023-24

•

Supplying heavy gauge PVC conduit pipe19/20mm dia 2mm thickconfirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The c...

•

Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thickconfirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The con...

•

Supplying heavy gauge PVC conduit pipe25mm dia 2mm thickconfirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc by groove cutting in wall and fixing by bracing U o...

•

Supplying heavy gauge PVC conduit pipe32mm dia 2.5mm thickconfirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing...

•

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.(Page2/1.4) 75x75x65mm

•

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.(Page2/1.4) 100x75x65mm

•

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.(Page2/1.4) 135x75x65mm

•

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.(Page2/1.4) 180x90x65mm

•

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.(Page2/1.4) 200x200x65mm

•

19/20mm deep junction box

•

32mm deep junction box

•

Suppling And Fixing "S" Hook made out of 14mm dia M.S.Rod. (Page3/1.10)

•

Supplyin And Fixing Metal Fan Box with Round Hook.(Page3/1.12)

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100 V gradeCOPPER FRLS PVC insulated, 2x1.5SqmmCable confirming to the GTP, with a 6Amps flush type SP control...

•

Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch (Page5/2.1.2)

•

Long point above 6Mtr up to 10Mtr from tapping point to out let via switch (Page5/2.1.3)

•

SupplyinganddrawingFlexibleMulticoreCablemanufactured with electrolyticgradeflexiblecopperwithlowconductor confirmingto IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage u...

•

Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wir...

•

Supplying And fixing/replacing of 6/16/32A electrical

•

accessories on existing switch board. 32A Bakelite DP(Page10/2.5.3)

•

16Amps Flush type SP switch

•

6/16A Universal Socket

•

16/6A combined plug and socket with control switch

•

Supplying and fixing surface/flush mounting unbreakable PVCmodular box suitable formountingmodular switch plates with due groove cutting inBrick/C.Cwall, including necessary rawl plugs, Machine/NF scr...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module (Page9/3.1.1)

•

16Amps one way switch

•

6Amps Bell push

•

32Amps DP switch

•

6/16Amps universal socket

•

TV/Telephone socket

•

Supplying And fixing/replacing of 6/16/32A electricalaccessories on existing switch board , 6A Pendant Holder(Page10/3.14.6)

•

Supplying and fixing PBBC /Bakelite straight or slant batten holder and wiring, within 60w/230 Volts lamps. (Page10/3.14.7)

•

Supplying of feet PVC batten with integrated led tube with high quality diffuser with Life of 25000 burning hours and 70 lumen maintenance with cri 80. power Input: 220-240V50/60Hz&Power factor 0.9 a...

•

Supplying of recess mounting non integral type. led w luminaire comprising of pressure de cast extruded aluminum housing, with spring loaded false ceiling clamps Power led switch CCT6500 degree K,CRI ...

•

SupplyingandfixingregularMCCBdistributionPanel confirmingto IS/IEC614393 and IK09 tested as per IS/IEC62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, withsuitable earthings...

•

Supplying&fixing miniature circuit breakers on existingMCBdistribution boards using necessary fixing materials and 'C' Type curve, indicatorON/OFF, energycross-3 with Short circuit breaking capacity o...

•

SupplyingandfixingregularMCBdistributionboards onwall/ood board/ flushmountingusingrequiredclamps, bolts, nuts etc.,with provision for fixing suitable type capacityMCB's single phase/3

•

phase/singledoo...

•

Supplying, fixingandwiringearth leakage relaywithcorebalancedcurrent transformer suitable for single phase50HzACwithlatest

•

microcontrollerbased,digitalreadoutofpercentage leakage current, programmable...

•

Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,(Page No-44/81,Item np-2.08)

•

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE5 starrating and IS:374/19 and also comply with IS:1709/1984 with latest amendment, Ratedvoltage220V/50Hz,Ratedpowerupto35W+/-10%...

•

Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wi...

•

Fixingaceiling/Wallmountingfanofallcapacitiesandall types to the existing 'S'' hook with fan egulator to the existing board togetherwith supplying andfixing 5A. ceilingrose, necessary length of 23 / 0...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern. Fixing of casing pipes, collars and cap with n...

•

Item No.12.1.2-Basic rate 50 to 100 Mtrs

•

Item No.12.1.3-Basic rate 100 to 150 Mtrs

•

Item No.12.1.4-Basic rate 150 to 200 Mtrs

•

Supply of ISI Mark 175mm nominal bore, plain end steel casing pipe-grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest amendments, electrical resistance welded steel tube mat...

•

Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...

•

Providing,Supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000; 3Phase, SS Bowl & Impeller with Low volt Motor and as per specifications, a...

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x6 S...

•

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm.WS Common Schedule of rates for the year 2023-24. Volume V Pa...

•

Supply and delivery at site of and new best make non return valve as per IS 778 1984 with ISI Mark and as per its latest amendments Size 50 mm WS Common Shedule of rates for the year 2023-24

•

providing and supplying 50mm dia GI pipe Heavy duty WS Common Schedule of rates for the year

•

Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any.WS Common Schedule of rates for the year 2023-24 Volume V Ipage No-129/11.6.6

•

Supply, installing, testing and commissioning COMMON control panel consisting of the following INCOMING: 1 No set of phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1No Analog...

•

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., co...

•

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

•

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...

•

Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collers,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof ...

•

Labour charges for Erection, Electrification and commissioning works of Pump sets including aligning and balancing with all items including supply and erection of two pair of supporting clamps, bore ...

•

Labour charges for Erection of outdoor type panel board and meter board units with all necessary materials and labour,tools and equipments including providing cement concrete foundation bed etc., com...

•

Providing main connection from pole - PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. WS Common Sch...

•

Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Tender Notification For New Office Building.docx

Others - Tender Notification • 0.07 MB

Office building DTP kw 19-06-2026.docx

Tender Document • 0.64 MB

Ready to Participate?

Download all tender documents and submit your bid