Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹25.2 LAccepted-AOC | 1 | Accepted-AOC Being L1 | |
| 2 | 2₹28.8 L+₹3.3 L (13.1%)Rejected-Finance RAHEJA NIWAS 243 GHORPADE PETH PUNE 411 042 | PUNE | PUNE | MAHARASHTRA | 411042 | 2 | Rejected-Finance Not L-1 | |
| 3 | 3₹36.0 L+₹10.5 L (41.1%)Rejected-Finance | 3 | Rejected-Finance Not L-1 | |
| 4 | 4₹38.0 L+₹12.5 L (49.2%)Rejected-Finance | 4 | Rejected-Finance Not L-1 | |
| 5 | 5₹38.3 L+₹12.8 L (50.3%)Rejected-Finance | 5 | Rejected-Finance Not L-1 |
Tender Value
Refer Docs
EMD Value
₹88,000
Closing Date
12 Jan 2021, 6:00 pmClosed
Lt Col Vijay Singh GE
Garrison Engineer Naval Depot Industrial Estate Post 104 Area Visakhapatnam 530007
REPAIR TO CERTAIN WOODEN FURNITURE UNDER BSO ND OF GE ND VISAKHAPATNAM
2020_MES_403578_1
8917
Open Tender
Miscellaneous Works
Item Rate
270 days
Visakhapatnam
As per NIT
5 documents required · 5 mandatory
₹500
Yes
GE ND Visakhapatnam
₹88,000
Yes
19 Apr 2021
15 Dec 2020
16 Jan 2021
15 Dec 2020
12 Jan 2021
30 Dec 2020
Amount
Removal of existing broken/unserviceable front leg of chair dining and replacing the same with new front leg of 1st class hard wood (Teak) (size and dimension of the replaced parts shall be of the same pattern/size as shown in drawings and specifications) and applying two coats of french polish to all replaced parts to match with existing complete all as specified and directed [FD-279, 228 & 203] Note:- All furniture repairs shall be carried out at various units / BSO yard as per the direction of Engineer-in-charge. Quoted rate shall be deemed to be inclusive of all subsequent expenditure occured on carrying out repairs at various sites/locations and nothing extra on account of any misunderstanding or otherwise on this account shall be admissible.
All as per Item No.1 above but replacing the rear leg of Chair Dining [FD-279, 228 & 203]
All as per Item No.1 above but replacing the back rest of Chair Dining [FD-279, 228 & 203].
All as per Item No.1 above but replacing the front/side/back rail of Chair Dining. [FD-279, 228 & 203]
All as per Item No.1 above but replacing the bottom stiffener of Chair Dining. [FD-279, 228 & 203]
Removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of chair dining completeall as shown in drawings and as specified. [FD-279, 228 & 203]
M & L for fixing MS right angle of size 50X30X5mm thick on any one corner of chair dining by screwing to side rail and leg of chair all as specified and as directed by Engr-in-Charge. [FD-279, 228 & 203]
M & L for preparation of old treated wooden surfaces of chair dining as per drawing No FD-16/227/260/279 and applying two coats of french polish complete all as specified and directed.
M&L for removal of existing broken / unserviceable front /back/ side rail of Chair dining cushioned, replacing the same with new teak wood front/back/side rail, size & dimension of the parts shall be of the same pattern/size as shown in drawing and specification, fixed to main frame and legs of chair dining cushioned and apply two coats of french polish to all replaced parts to match with existing complete all as specified and directed [FD/E6/MAP/10/10(R)]
All as per Item No.9 above but replacing the front leg of chair dinning cushioned [FD/E6/MAP/10]
All as per Item No.9 above but replacing the back stiffener of chair dinning cushioned [FD/E6/MAP/10]
M&L for removal of old unserviceable seat of chair dining cushioned and fixing new cushion of 75mm thick, 32 density foam seat, covered with fabric of approved colour fixed to 12mm thick commercial plywood seat of Chair Dining cushioned complete all as specified and directed [FD/E6/MAP/10/10(R)]
Removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of chair dining cushioned as shown in drawing and as specified. [FD/E6/MAP/10/10(R)]
M & L for fixing MS right angle of size 50X30X5mm thick on any one corner of chair dining cushioned by screwing to side rail and leg of chair all as directed and as specified [FD/E6/MAP/10/10(R)]
M & L for preparation of old treated wooden surfaces of chair dining cushioned as per drawing No [FD/E6/MAP/10/10(R)] and applying two coats of french polish complete all as specified and directed.
M & L for removal of existing broken / unserviceable front /back/ side rail of Chair dining JCO/OR, replacing the same with new teak wood front/back/side rail , size & dimension of the parts shall be of the same pattern/size as shown in drawing and specifications and fixed to main frame and legs of Chair dining JCO/OR and applying two coats of french polich to all replaced parts to match with existing all as specified and directed [FD/MAP-II/05]
All as per Item No.16 above but replacing the front leg of chair dinning JCO/OR [FD/MAP-II/05]
M & L for stiffener made out of 25 x 25 mm , 1st class hard wood (Teak) having a length of 430 mm under PVC seat to sustain weight applied to chair dining by fixing horizontally between top of two side rails of chair dining suitable for fixing PVC seat over new stiffner and all exposed surfaces of replaced parts duly french polished complete all as specified and directed.[FD/MAP-II/05]
M&L for removal of old unserviceable broken PVC seat of chair dining JCO /OR and fix new PVC seat of make AMCO or equivalent in Chair Dining JCO/OR complete all as specified and directed [FD/MAP-II/05]
Removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of chair dining JCO/OR as shown in drawing. [FD/MAP-II/05]
M & L for fixing MS right angle of size 50X30X5mm thick on any one corner of chair dining JCO/OR by screwing to side rail and leg of chair all as specified and directed. [FD/MAP-II/05]
M & L for preparation of old treated wooden surfaces of chair dining JCO/OR and applying two coats of french polish complete all as specified and directed. [FD/MAP-II/05]
Removal of existing broken/unserviceable front leg of chair writing, replacing the same with new front leg 1st class hard wood (Teak) , size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and applying two coats of french polish to all replaced parts to match with existing all as specified and directed [FD-280/250]
All as per item No.23 above but replacing rear leg of chair writing [FD-280/250]
All as per item No.23 above but replacing back rest of chair writing [FD-280/250]
All as per item No.23 above but replacing arm rest of chair writing [FD-280/250]
All as per item No.23 above but replacing bottom stiffener of chair writing [FD-280/250]
All as per item No.23 above but replacing front / back/side rail of chair writing [FD-280/250]
Removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of chair writing complete all as shown in drawing and as specified. [FD-280/250]
M & L for fixing MS right angle of size 50X30X5mm thick on any one corner of chair writing by screwing to side rail and leg of chair all as specified and directed by Engr-in-Charge [FD-280/250]
M & L for preparation of old treated wooden surfaces of chair writing and applying two coats of french polish complete all as specified and directed. [FD-280/250]
Removal of existing broken/unserviceable front leg of Chair wooden bottom without arms, replacing the same with new front leg 1st class hard wood (Teak) , size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and applying two coats of french polish to all replaced parts to match with existing all as specified and directed [FD-285 & 225]
All as per item No. 32 above but replacing rear leg of Chair wooden bottom without arms [FD-285 & 225]
All as per item No. 32 above but replacing back rest of Chair wooden bottom without arms [FD-285 & 225]
All as per item No. 32 above but replacing front/rear/side rail of Chair wooden bottom without arms [FD-285 & 225]
All as per item No. 32 above but replacing stiffener of Chair wooden bottom without arms [FD-285 & 225]
Removal of existing broken / unserviceable plywood seat of chair wooden bottom without arms and replacing the same with new one side teak wood plywood seat 6mm thick fixed to bottom frame of the seat with steel screws @ 75mm C/C complete all as shown on drg and as specified. [FD-285 & 225]
Removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of chair wooden bottom as shown in drawing and as specified. [FD-285 & 225]
M & L for fixing MS right angle of size 50X30X5mm thick on any one corner of chair wooden bottom by screwing to side rail and leg of chair all as specified and directed [FD-285 & 225]
M & L for preparation of old treated wooden surfaces of chair wooden bottom and applying two coats of french polish complete all as specified and directed. [FD-285 & 225]
Removal of existing broken/unserviceable front leg of Chair easy and replacing the same with new front leg 1st class hard wood (Teak), size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and applying two coats of french polish to all replaced parts to match with existing all as specified and directed [FD-229 & 201]
All as per item No. 41 above but replacing arm rest of Chair easy [FD-229 & 201]
All as per item No. 41 above but replacing front/rear/back rail of Chair easy [FD-229 & 201]
All as per item No. 41 above but replacing top / bottom/side rail of back rest frame of Chair easy [FD-229 & 201]
M&L for removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of chair easy as shown in drawing [FD-229 & 201]
M & L for fixing MS right angle of size 50X30X5mm thick on any one corner of chair easy by screwing to side rail and leg of chair all as directed [FD-229 & 201]
M & L for preparation of old treated wooden surfaces of chair easy and applying two coats of french polish complete all as specified. [FD-229 & 201]
Removal of existing foggy/broken mirror of Hat stand and replacing the same with new mirror of size 300X400mm not less than 5.0mm thick fixing on the existing frame complete all as shown on drawing and as specified. [FD-233]
Removal of old broken plywood back of Hat stand with mirror and replacing the same with new 6mm BWR plywood fixing to the existing frame alongwith 25X20mm wooden beading alround all as shown on drawing and as specified. [FD - 233]
Removal of old broken plywood front of Hat stand with mirror and replacing the same with new 4mm one side teak BWR plywood fixing to the existing frame alongwith 25X20mm wooden beading alround all as shown on drawing and as specified. [FD - 233]
M&L for removing broken aluminium peg hooks and new anodised aluminium peg hooks 75 mm long fixed to the Hat stand with mirror all as specified and as directed. [FD - 233]
S & F new MS key plate for hanging hat stand on wall fixed to back side of hat stand all as specified and as directed. [FD - 233]
M & L for preparation of old treated wooden surfaces of Hat stand and applying two coats of french polish complete all as specified.[FD - 233]
M & L for removing unserviceable Hat stand with mirror from various sites and brining back to BSO yard and fixing new / repaired Hat stand with mirror on the wall at same site with suitable MS screws over a wooden / PVC plug as per directions of Engr-in-Charge. [FD - 233]
Removal of existing foggy/broken mirror of Table dressing gents and replacing the same with new mirror not less than 5.0mm thick and of size 380X760mm fixing on the existing frame all as shown on drawing and as specified. [FD-230]
M & L for removal of old broken plywood back of mirror of table dressing gents and replacing the same with new 6mm plywood BWR, fixing to the existing frame alongwith 35X25mm wooden beading alround all as shown on drawing and as specified.[FD - 230]
M & L for removal of old broken particle board top/bottom of table dressing gents drawer and replacing the same with 18mm prelaminated particle board of size 900X300mm of same colour & texture as per existing item complete all as shown on drawing and as specified. [FD - 230]
M & L for removal of old broken drawer of table dressing gents and replacing the same with drawer of size 340x300mm fixed to existing frame all as shown on drawing and as specified. [FD - 230]
S & F MS Knob chromium plated 30mm to drawer of table dressing gents complete all as shown in drawings and as specified. [FD - 230]
M & L for preparation of old treated wooden surfaces of table dressing gents and applying two coats of french polish complete all as specified and directed. [FD-230]
M & L for removing unserviceable table dressing gents from various sites and bringing back to BSO yard and fixing new / repaired table dressing gents on the wall at same site with suitable MS screws over a wooden / PVC plug as per directions of Engr-in-Charge. [FD - 230]
M & L for removal of existing foggy/broken mirror of Table dressing gents and replacing the same with new mirror not less than 5.0mm thick of size 1200X600mm fixing on the existing frame all as shown on drawing and as specified. [FD/E6/MAP/16]
M & L for removal of old broken plywood back of mirror of table dressing gents and replacing the same with new 6mm BWR plywood fixing to the existing frame all as shown on drawing and as specified.[FD/E6/MAP/16]
S & F Glass shelves of size 100X600X5mm thick for table dressing gents complete all as specified and directed. [FD/E6/MAP/16]
Removal of old broken leg of table dressing gents and replacing the same with new 38X38X338mm leg in 1st class hard wood (teak) and 38X112X112mm wooden bracket on top of leg fixing one side to wooden frame of mirror and other side to leg complete all as shown on drawing and as specified. [FD/E6/MAP/16]
M & L for preparation of old treated wooden surfaces of table dressing gents and applying two coats of french polish complete all as specified. [FD/E6/MAP/16]
M & L for removing unserviceable table dressing gents from various sites and bringing back to BSO yard and fixing new/repaired table dressing gents on the wall at same site with suitable MS screws over a wooden / PVC plug as per directions of Engr-in-Charge. [FD/E6/MAP/16]
M & L for removal of existing foggy/broken mirror of Table dressing ladies and replacing the same with new mirror not less than 5.0mm thick and of size 366X1220mm fixing on the existing frame all as shown on drawing and as specified. [FD-251/378]
M & L for removal of old broken plywood back of mirror of table dressing ladies and replacing the same with new 6mm BWR plywood fixing to the existing frame alongwith 35X25mm wooden beading alround all as shown on drawing and as specified.[FD - 251/378]
M & L for removal of old broken drawer of table dressing ladies and replacing the same with drawer of size as shown on drawing and as specified. [FD - 251/378]
M&L for removal of old broken glass door of table dressing ladies and replacing the same with glass door of size 5mm Thick of size as shown on drawing and as specified. [FD-251/378]
M&L for removal of old unserviceable aluminium channel of table dressing ladies and replacing the same with suitable size as shown on drawing and as specified. [FD-251/378]
S & F MS Knob chromium plated 30mm to drawer of table dressing ladies all as shown in drawing and as specified. [FD - 251/378]
M & L for removing existing broken/unserviceable leg of table dressing ladies replacing the same with new leg 1st class hard wood (Teak) , size & dimension of the parts shall be of the same pattern/ size as shown in drawing as well as specified and applying two coats of french polish to all replaced parts to match with existing all as specified and directed.[FD-251/378]
M & L for preparation of old treated wooden surfaces of table dressing ladies and applying two coats of french polish complete all as specified and directed [FD-251/378]
M & L for removal of existing foggy/broken mirror of Table dressing ladies and replacing the same with new mirror not less than 5.0mm thick and of size 430X1230mm and fixing on the existing frame all as shown on drawing and as specified. [FD/E6/MAP II 07]
M & L for removal of old broken plywood back of mirror of table dressing ladies and replacing the same with new 6mm BWR plywood fixing to the existing frame alongwith 25X20mm wooden beading alround all as shown on drawing and as specified.[FD/E6/MAP II 07]
M&L for removal of seat cushion of table dressing ladies with mirror and supply and fixing new foam cushion 75mm thick having 32 density over 12mm thick commercial plywood seat base . The foam cushion shall be duly stitched with tapestry cloth , cost of the tapestry cloth used in the work shall be of not less than Rs.240/- per metre and the colour quality and design shall be as approved by the Engineer-in-Charge complete all as shown in drawing and as specified. [FD/E6/MAP II 07]
M&L for removing old broken particle board top/side/bottom of table dressing ladies with mirror and replacing with 18mm particle board exterior grade top/side/bottom drawer of table dressing ladies with mirror all as shown in drawing and as specified. [FD/E6/MAP II 07]
S & F MS Knob chromium plated 30mm to drawer of table dressing ladies all as shown in drawing and as specified. [FD/E6/MAP II 07]
M&L for removal of old broken drawer of table dressing ladies and replacing the same with drawer of size as shown on drawing and as specified. [FD/E6/MAP II 07]
M & L for preparation of old treated wooden surfaces of table dressing ladies and applying two coats of french polish complete all as specified and directed [FD/E6/MAP II 07]
M&L for removing unserviceable and broken plastic cane and cleaning entire surface of the chair dining and recanning with new plastic cane of size 1.8X0.46mm and boarder with 3.0X0.6mm size cane as per godrej pattern complete all as specified and directed.[FD-16/227/260/279]
All as per Item No.83 above, but for chair easy seat only. [FD-229]
All as per Item No.83 above, but for chair easy back only.[FD-229]
All as per Item No.83 above, but for chair writing. [FD-261/280]
Mahesh Traders
SANTOSH CONSTRUCTIONS
M/s.Kissenlal Daga
NU-GIFT INDUSTRIES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .