C/O foot bridge to connecting Municipal Corporation office and Mayor Office along with electric work

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. as per drawing and H.P.P.W.D technical specifications including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as per drawing and H.P.P.W.D technical specifications including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per drawing and H.P.P.W.D technical specifications including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes as per drawing and H.P.P.W.D technical specifications including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.Sal wood for flooring (foot bridge) as per drawing and H.P.P.W.D technical specifications including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class teak wood 35 mm thick as per drawing and H.P.P.W.D technical specifications including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately).12mm thick commercial ply conforming to IS: 1328 BWR type as per drawing and H.P.P.W.D technical specifications including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Melamine polishing on wood work (one or more coat) outer wall as per drawing and H.P.P.W.D technical specifications including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m² as per drawing and H.P.P.W.D technical specifications including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than275 gm/m² as per drawing and H.P.P.W.D technical specifications including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives as per drawing and H.P.P.W.D technical specifications including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per drawing and H.P.P.W.D technical specifications including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Wiring for light point/fan point/call bell point with 1.5 s.mm. PVC insulated heat resistant flame retardant (HRFR) and low smokw single core (Flexible coppern conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required complete in all respect with wire PVC conduit Pipe etc as per drawing and H.P.P.W.D technical specifications including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Wiring for light plug with 2X4 Sq.mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (Flexible copper conductor cable in surface/recessed steel conduit and along 1 no. with 1.5 sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required complete in all respect with wire PVC conduit Pipe etc as per drawing and H.P.P.W.D technical specifications including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Wiring for light plug with 2X4 Sq.mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (Flexible copper conductor cable in surface/recessed steel conduit and along 1 no. with 4 sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required complete in all respect with wire PVC conduit Pipe etc as per drawing and H.P.P.W.D technical specifications including all lead and lifts and carriage of material as directed by the Engineer-in-charge

surinder singh bains