SITC of two nos of centrifugal pump having capacity 70 m3/h and induction motor having capacity 100HP and 40 HP for Water Treatment Plant at south Campus of IIT Mandi.

Amount

Supplying of centrifugal pump having horizontal spindle, horizontal/redial split casting /end suction (back -pull our arrangement)single /double /in series /parallel of recommended make such as Mather and platt/KSB as per BIS 1520-1980 with upto date amendments read with is 9137-1978 or latest edition suitable for lifting water for under mentioned characteristics with bronze. impellers /priming funnels, casting ring and shaft sleeves of bronze, shaft of steel grade 4508 FNB with cast iron casing coupled directly through a flexible coupling to slip ring it should include cost of bearing nuts, bolts and painting and should meet the following requirements : same size and specification as already installed in the water treatment scheme. Discharge (Q):- 70 m3/h Head :- 230 meter pumping hours 8 hours characteristics of water clear :- cold water Rising main dia 150mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Supplying of centrifugal pump having horizontal spindle, horizontal/redial split casting /end suction (back -pull our arrangement)single /double /,in series /parallel of recommended make such as Mather and platt/KSB as per BIS 1520-1980 with upto date amendments read with is 9137-1978 or latest edition suitable for lifting water for under mentioned characteristics with bronze impellers /priming funnels ,casting ring and shaft sleeves of bronze, shaft of steel grade 4508FNB with cast iron casing coupled directly through a flexible coupling to slip ring it should include cost of bearing nuts, bolts and painting and should meet the following requirements : same size and specification as already installed in the water treatment scheme. Discharge (Q) :- 70 m3/h Head :- 70 meter pumping hours 8 hours characteristics of water clear:- cold water Rising main dia 150mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Supplying of 100 H.P. induction motor /motor of standard make such as KSB /martion and suitable for operation on 400(+/-)10% volts ,50 cycles /second. 3phase AC electric supply the power of electric motor should be at 10% in excess of the maximum power required by the pump in operation range of +10% and (-)15% of the duty point head, the motor as per ISI:325:1978 with upto date amendment read with IS 900;1972,it should include cost of bearing nuts, bolts and painting and should meet the following requirements: same size and specification as already installed in the water treatment scheme. Output HP : 100 Hp Voltage:415V Phase:3 Output KW 75 kW Frequency :50 Hz as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Supplying of 40 H.P. induction motor /motor of standard make such as KSB /martion and suitable for operation on 400(+/-)10% volts ,50 cycles /second. 3phase AC electric supply. The power of electric motor should be at 10% in excess of the maximum power required by the pump in operation range of +10% and (-)15% of the duty point head .the motor as per ISI:325:1978 with upto date amendment read with IS 900;1972,it should include cost of bearing nuts, bolts and painting and should meet the following requirements: same size and specification as already installed in the water treatment scheme. Output HP : 40 Hp Voltage:415V Phase: 3 Output KW 30 kW Frequency :50 Hz as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

M/S OASIS ENTERPRISES (BID ID -3235150)

Y.M Sales Corporation (BID ID -3235558)