REPAIRS TO ROOFING, JOINERIES, FALSE CEILING, FLOORING, ROOF TREATMENT, PLUMBING, SANITARY FITTINGS, MP TILES, SUNKEN FLOOR AND PERIODICAL SERVICES TO OTM BLDG AT MH AND RECORD AREA AT KANNUR UNDER GE (ARMY) TRIVANDRUM

Amount

Taking down cement or cement lime plaster on concrete or brick/stone walls incl raking out joints hacking for key scrubbing down with water etc and removing rubbish outside MD land complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on concrete/stone masonry or similar surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:6) on concrete/stone masonry or similar surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick cement plaster in cement mortar (1:3) on ceilings of concrete surface, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered surface of walls including cornices and pilasters and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparing new plastered surface of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L for preparing new plastered surface of walls and applying three coats of white wash complete all as specified and directed.

M&L for providing and applying 1mm thick plaster of Paris putty over plastered surface to prepare the surface even and smooth and applying two coats of distemper oil emulsion over a coat of primer, preparatory to distempering complete all as specified and directed.

M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparing old treated surface of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, grease spots etc including cornices and pilasters and applying two coats of white wash on wall complete all as specified and directed.

M&L for preparing old treated surface of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, grease spots etc including cornices and pilasters and applying two coats of white wash on ceiling complete all as specified and directed.

M&L for preparation of old treated surface by washing, rubbing down and stopping of previously painted surfaces of wall and applying one coat of distemper oil emulsion (white or tinted) complete all as specified and directed.

M&L for preparation of old treated surface by washing, rubbing down and stopping of previously painted surfaces of wall and applying two coats of distemper oil emulsion (white or tinted) complete all as specified and directed.

M&L for complete removal of existing old treatment from wall surfaces, removing nails, etc. filling cracks, holes with putty and applying 1mm thick plaster of Paris putty for making the surface smooth and even and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M&L for preparing old painted wood based surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted steel based surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for complete removal of existing old treatment from wall surfaces, removing nails, etc. filling cracks, holes with putty and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L for preparation of old treated surface by washing, rubbing down and stopping of previously painted surfaces of wall and applying two coats of cement based paint complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F anodised aluminium snap grid frame work of grid size 605 x 605 mm for false ceiling, including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for 4 mm thickness non-asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ aluminium framework with screws fixed in ceiling flat or sloping complete all as specified and directed.

M&L for preparation of newly ceiling surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and remove rubbish off the premises complete all as specified and as directed.

Demolition of cement Concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and remove rubbish off the premises complete all as specified and as directed.

M&L for 40 mm thick PCC 1:2:4, type B1 using 20mm graded stone aggregate as in sub-base, floors or similar work, finished surface of concrete even and rough complete all as specified and directed.

M&L for joint free non-skid ceramic tiles (coloured) 7 to 8mm thick, (Square/rectangular), area of each tile exceeding. 0.18 Sqm but not exceeding 0.38 Sqm as in floor set and joint in cement slurry, jointed & pointed in white or coloured cement to match the surface of the tile over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 350x250x7 mm/ 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of the tile over and including 10 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Dismantling single layer Mangalore pattern or similar tiles in roofing including ridge tiles complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws/ J-hooks complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws/ J-hooks complete all as specified and directed.

M&L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed.

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed.

Dismantling wooden battens for tiles, shingles etc, of any size including tilting fillets, spaced exceeding 15 cm complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

M&L preparation of new surfaces of steel and iron work of any description over 10 cm width or girth with applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer etc complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, unframed work, in any position complete all as specified and directed.

M&L for second class hardwood in scantlings, clean sawn, timber framed complete all as specified and directed.

All as per Sl No. 38 here-in-before, but except wooden scantlings complete all as specified and directed. (Note: Timber scantlings retrieved from item No. 37 will be reused)

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 20 mm thick granite (black) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and urinal partition including grouting, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Demolition of existing water proofing/ black top treatment (including concrete padding), roughening of concrete surfaces, cleaning and washing down the surface with water and removing debris/ rubbish materials outside MD land complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4, type B1 using 20mm graded stone aggregate as in sub-base, floors or similar work, finished surface of concrete even and rough and rendering 15 mm thick cement plaster in cement mortar 1:4 on RCC roof slab, finished even and smooth, mixed with water proofing compound @ 3% by the weight of cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

M&L for water proofing treatment to RCC roof with APP modified water proofing membrane of 3 mm thick and weight not less than 3.80 kg per Sqm as per IS 16540-2017/ IS-16532-2017 mineral finish, reinforced with non woven polyester matt (weighing not less than 150 Gms/Sqm) by torch application over bitumen primer @ 0.40 litre per Sqm of same manufacturer conforming to IS 3384-1986. APP membrane shall be fixed laid by torch application including minimum 10 cm side overlap and 15 cm end lap and painting over APP membrane sheet with bituminous aluminium paint @ 0.10 Ltr/Sqm as per manufacturer's instructions complete all as specified and directed.

Dismantling water tanks of capacity exceeding 500 ltrs and not exceeding 1000 ltrs and removing to store complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks triple layered of capacity 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position, including 20 mm bore dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed all as specified in SSR Part I complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks triple layered of capacity 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position, including 20 mm bore dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed all as specified in SSR Part I complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs aluminium alloy powder coated curtain rod, decorative type 20 mm dia with fixing brackets, stops, rollers etc. complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, removal to store complete all as specified and directed.

Taking up or down 25 mm bore steel tubing and connections, removal to store complete all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing, etc., and making good, cutting not exceeding 10 cm girth in stone concrete block or slab walls complete all as specified and directed.

S&F 15 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 with all pipe fittings fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S&F 20 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 with all pipe fittings fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S&F 25 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 with all pipe fittings fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S&F in repairs 20 mm bore dia. ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repairs pillar taps of size 15mm bore dia, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

M&L for 32 mm dia. waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, including taking down old waste fitting complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs bib tap of size 15mm bore dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm bore dia. stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs 20 mm bore dia. stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs soap dish brass chromium plated, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including fixing bolt, seat cover (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage etc complete all as specified and directed.

S&F in repairs vitreous China wash basin, white, flat back, size 630 x 450 mm, including fixing with brackets, waste pipe complete all as specified and directed.

M&L for cast iron Nahani trap 100 mm dia of outlet, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repairs shower rose, brass, chromium plated 125mm size with or without swivel joints, fixed to steel pipe or union complete all as specified and directed.

Taking down chowkats or frames with shutters any description not exceeding 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames with shutters any description exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frame) complete all as specified and as directed.

Taking down shutters of any description exceeding 1 sq.m and not exceeding 2 sq.m each complete all as specified and directed.

M&L for second class hardwood, plain, solid straight chowkats & frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including preservative treatment complete all as specified and directed.

M&L for second class hardwood glazed and skeleton shutters, 30 mm thick open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); and fitted to chowkats complete all as specified and directed.

M&L for second class hardwood plain, framed, paneled shutters 35 mm thickness (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

M&L for second class hardwood glazed and skeleton shutters, 35 mm thick open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm M.S. square tube of 19 gauge metered cut at two corners and joined by inserting two Nos of 150 mm long brackets of 15 mm x 15 mm MS square tube inside the 19 mm x 19 mm square tube fixed to wall by drilling 100 mm long MS screws using PVC fastener, fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 100 mm size butt hinges, medium weight, stainless steel complete all as specified and directed.

S&F 75 mm size butt hinges, medium weight, stainless steel complete all as specified and directed.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F mild steel works for flat iron as hold fast and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, (overall length of cover plate 150mm) fixed in floor complete all as specified and directed.

M&L for PCC 1:2:4, Type B1 (using 20mm graded stone aggregate) for fixing holdfast block and the like complete all as specified and directed.

S&F powder coated aluminium windows and ventilators shutters, fixed type one part of 5 mm thick frosted glass and one part of wire mesh consisting of stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, frame (chowkat) of without sash bar, aluminium section weighing 0.55 Kg/ Rm including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, etc. complete all as specified and directed.

S&F powder coated aluminium sliding windows with shutter styles 40mm x 20mm sheet thickness 1.2 mm two shutter of glass and one shutter of wire mesh consisting of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, frame (chowkat) of window shall 91.80mm x 31.75mm x 1.20mm thick section for glass shutter (three track) with or without rebate 5 mm thick tinted glass fixed with aluminium beads locking arrangement with each shutter complete all as specified and directed.

S&F powder coated aluminium door (coating of any colour) using aluminium section weighing not less than 0.55 Kg/ Rm for frame and door shutters including necessary joining cleats, glazing clips, rubber neoprene packing, handle 02 Nos per shutter, hinges, aluminium anodised with sash bars, aluminium anodised snap beads, screws and fixed alog with 8mm thick glass fixed with glazing clips, shutters fixed on frame etc (The quoted rate shall be deemed to be included hardwares such as hinges, handles, locking arrangement, etc.) complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for second class hardwood plain fillets (sectional area not exceeding 3 sq.cm), square, rectangular or triangular in section, wrought, secured with screws complete all as specified and directed.

M&L for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and directed.

M&L for veneered decorative plywood, grade 1 (with BWR resin) with one face has decorative face veneers ; fixed with screws to timber frame work, including dismantling boarding, any description, fixed in any position with screws complete all as specified and directed.

M&L for 18/ 19 mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work, including dismantling boarding, any description, fixed in any position with screws complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30 mm width of flaps (when open) complete all as specified and directed.

T.P.SUNIL KUMAR (BID ID -3357561)

JESWIN BUILDERS (BID ID -3363945)