Lembutali

Amount

(Supply & Erection)

Erection of 8.0 / 9.0mtrs length of Steel Tubular Pole at any kind of soil upto a depth of 1/6 th of pole height, including excavation of earth, refilling the pit with with soil upto the ground level, ramming and making complete in all respect.

Erection of Stay set direct in earth complete with 19mm x 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm ,thimble, turn buckle, 7/3.15 mm dia G.I Standed stay wire and stain insulator etc. with Supply of M.S.Clamp,Nuts & Bolts etc. as required. and making complete in all respect.

Erection of "C" type bracket for LT 5-wire of 50 x 50 x6mm/ 65 x65 x 6 mm( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Angle Cross-Arm,1.0 to 2.8 mtr Long 65 x65 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm,0.3 to 1.2 mtr Long75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm,1.3 to 2.8 mtr Long75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm,0.6 to 2.8 mtr Long100 x50 x 50 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Earthing with G.I pipe 2.5mtr Long and 40mm dia, including excavation, refilling with alternate layer of salt & Charcoal as per drawing including supply of G.I.Pipe, Salt & Charcoal, GI wire, nuts &bolts, etc. as required)

Erection of 11KV Pin insulator along with Pin.

Erection of shackle insulator of size 75mm x 90mm /100mm x 15mm with straps & bolts/U clamp on poles (Excluding the cost of cost of straps/ U Clamp, Nuts & Bolts)

Erection of protective Guarding/Cross lacing for 415/240Volt line BY GI wire 98/10SWG as per technical specification,across road/River/Telecom line etc. in horizontal/Verticle formation complete with Spool/Reel insulator.

Febrication of Cross-Arms by MS Channel/MS Angle as per specification

Installation/Positioning of 11/0.430KV,3-Phase 63KVA of Distribution Transformer on Pole with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing.

Laying & Stringing of 1km (Single Conductor) ACSR 6/1/2.59 mm dia 'WEASEL' including hoisting & binding etc. Complete as required.

Erection of 9KV,5KA single pole metal oxide gapless type LA , including necessary connection complete as per technical specification.

Erection of 11KV DOF unit set of three nos. including necessary connection complete as per technical specification.(Excluding the cost of back clamp,Nuts & Bolts)

Erection of 11KV 200 Amp. GOS unit set of three nos. including necessary connection complete as per technical specification (Excluding the cost of back clamp,Nuts & Bolts)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Trench Size: Width-350mm, Hieght-1200mm / Sand (couhioning): Hieght-250mm, Width-350mm/ Protection: Double layer Bricks,Upto 120 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required , Upto 120 sq. mm

Providing Three Phase Service Connection with laying of PVC cable from nearby Electrical pole to Premises upto 35mtr in length supported by G.I.Wire,Reel Insulator i/c fitting fixing of Energy Meter as required .

Grouting of steel tubuler poles /stay set with CC of ratio 1:2:4(1 cement : 2 river sand : 4 Jhama brick aggregate of 20 mm nominal size)i/c supply of cement,sandand brick aggregate20 mm nominal size complete with excavation, refilling of earth ,ramming alonf with centeringand shutteringaas required @ 0.273 cum per Steel tubuler pole & & 0.119 cum/stay sets per TSECL specification,9 mtr long S.T Pole (0.273X31=8.463 cum).

Carriage of 8.0/9.0mtrs length of Steel Tubular Poles by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required,Beyond 25 km upto the lead of 50km,ii) Beyond 8 (eight) poles

Carriage of materials such as Cable,AAC, AAAC, DOF, LA, ACSR, G.I.Wire,Cross-Arm,Stay set,Insulators etc., by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required, upto the lead of 25km & 50km.,Upto the lead range 25km

Carriage of 11/0.430, 3-Phase 63KVA by Mechanical Transport from the Site /Store/Worshop to working site Vis-a-vis including loading, unloading and placing on base, as required,Beyond 25 km upto the lead of 50km

Supply of 11 KV XLPE Cable,3CX70 Sqmm.

Supply of 95 Sqmm Bimetalic Lugs

Supply of Wooden Plank(24"X10'X1.5"size) made of Karai wood

Supply of Polythene Pipe 1/2" dia

Supply of Fabricated MS Bracket Clamp made of 50x6 mm MS flat

Supply of Fabricated MS Stay Clamp, made of 50x6mm MS flat

Supply of MS Nuts & Bolts ( 16x75/90 mm)

Supply of 11KV Gang operated Switch, polymeric type

Supply of MS Stay set complete

Supply of GI stay Wire 7/2.5mm

Supply of febricated MS channel as per requirement of Site condition & suitable for HT/LT o verhead line & as directed by the " Enginnerer-In-Charge" made by (100x50x50x6 mm) with double coat of red oxide primer coating.

Supply of febricated MS channel as per requirement of Site condition & suitable for HT/LT overhead line & as directed by the " Enginnerer-In-Charge" made by (75x40x40x6) with double coat of red oxide primer coating.

Supply of febricated MS Angle as per requirement of Site condition & suitable for HT/LT overhead line & as directed by the " Enginnerer-In-Charge" made by (65x65x6mm) with double coat of red oxide primer coating.

Supply of Outdoor type heat shrinkable cable jointing kit with lugs for 11 KV grade XLPE cable for 3 core, 70 sq. mm.

Supply of 110 mm dia HDPE Pipe, Wall thickness (minimum-6.5 mm to Maximum 7.3 mm

M/S SAJAL DAS

TAPAN CHOUDHURY