SPECIAL REPAIR AND RE-CARPETING OF ROAD FROM VADINAR CIRCLE TO GATE NO-3 AT ICGS VADINAR UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A' B/R ITEMS

Material & Labour for repairs to pot holes any depth, not exceeding 1.0 Sqm each including sweeping free from dust and mud or water scoring, sunken surfaces in roads, paths, etc., cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) and making good by applying tack coat @ 5kg/10Sqm putting in Bituminous macdam, well rammed and sealed with binder 9.8 kg per 10Sqm blinded with 0.09 Cum of stone chipping and again well rammed depth of pot holes exceeding 30mm, complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for preparing old black top surface with wire brushes for removing caked mud, etc., sweeping with brooms and finally fanning cleaned surface with gunny bag to remove all loose dirt, etc., including priming tack coat with bituminous primer at 5kg/10 sqm using paving bitumen etc., complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for premix BM 50mm (consolidated thickness) thick using binder content @ 4% paving bitumen of any penetration laid/rolled compacted to req gradient & camber with 8 to 10 Tonne power roller, complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for Bituminous Premix Semi-dense asphaltic concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient etc., and applying priming coat @ 5Kg per 10Sqm using paving bitumen VG-30 including preparation of surfaces etc., complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for painting lines, dashes, arrowes, letters, marking of 2 mm thick & width exceeding 10cm or not exceeding 15cm on new surface or previously treated road surface with hot applied retro reflective thermoplastic road marking paint (white / golden yellow) confirming to MORTH (clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160 degree Centigrade including cleaning and drying the existing road surfaces to ensure dust, oil grease and moisure free surfaces before applying paint, complete all as specified and as directed by Engineer-in-Charge.

Supply & Fixing Reflective road studs /made out tough polycarbonate and its reflective lance shall be made with polycarbonate microprismatic, retro reflective lance electronically welded to the body of stud and overall size 90mm x 100mm x 18mm, the lower surface of studs will be supported with 2 Nos. nylon shanks each of lenght not less than 20mm and load bearing capacity 20 Tonne and fixed with epoxy adhesive in road complete all as per manufacturer's instructions, complete all as specified and as directed by Engineer-in-Charge. Make :- Sinor Infrastructure(DA-51), Kiwalite of kiwa chemical industry Co. Ltd, Futura Vista 3M, Aktion safety

Supply & Fixing solar reflective road studs made out tough polycarbonate and its reflective lance shall be made with polycarbonate microprismatic, retro reflective lance electronically welded to the body of stud and overall size 90mm x 100mm x 18mm, the lower surface of studs will be supported with 2 Nos. nylon shanks each of lenght not less than 20mm and load bearing capacity 20 Tonne and fixed with epoxy adhesive in road complete all as per manufactures's instructions, complete all as specified and as directed by Engineer-in-Charge. Make :- Sinor Infrastructure(DA-51), Kiwalite of kiwa chemical industry Co. Ltd, Futura Vista 3M, Aktion safety

jitendra c joisar

RAJESH ENTERPRISE

roxy enterprise

Nitesh Enterprise

K K Construction Co