PROVISION OF HARD STANDING IN FRONT OF L BUILDING AT OLD NAUASENABAUGH NEAR BUILDING NO P 96 NEAR KINDERGARTEN SCHOOL P 36 AT NAUSENABAUGH VISAKHAPATNAM AND PROVISION OF VITRIFIED TILES AND OBD IN RENAL CARE UNIT COMPLEX AS AND AS TO ICU COMPLEX

Amount

Excavating over areas not exceeding 1.5m deep and getting out in hard / dense soil complete all as specified and as directed.

Excavating over areas not exceeding 1.5m deep and getting out in hard / dense soil complete all as specified and as directed.

M&L for hardcore of gauge not exceeding 63mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface in broken boulders complete all as specified and as directed.

M&L for PCC 1:4:8, Type D2 ( using 40mm graded aggregates) as in bed concrete for foundation etc complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M & L for Machine pressed precast cement concrete coloured Glazed interlocking paver block any shape and size confirming to IS 15658 - 2006 of 80 mm thickness, M - 40 Grade with grey cement and pigment complete all as specified and as directed. Make: M/s Ultra tiles, M/s Bharat tiles , M/s Nitco tiles or Equivalent

Removing Excavated soils exceeding 1.5 KM but not exceeding 5 KM and depositing where directed complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded aggregate with grey coloured as bend, kerb, chamfered on edges/ sides of path etc including weathering slightly rounded or chamfered on edges and throating complete all as specified and directed

Demolition of un-reinforced cement concrete in any floors and pavings not exceeding 15 cm thickness, (Below or above ground level) and disposal of unserviceable materials, debris and rubbish to out side MD land complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B1 (Using 20 mm graded granite stone aggregate) in sub base of floorings complete all as specified and as directed.

M&L for Vitrified ceramic tiles 10 mm thick (Square/ Rectangular) polished, Dark shade, area of each tile not exceeding 0.36 Sq. M, as in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including screed bed or bedding layer in cement mortar 1:4, 15 mm thick complete all as specified and as directed. Make : Johnson / Nitco / Asian Granito / Varmora / Orient Bell

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc and removal of rubbish to the out side MD land complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

M & L for Vitrified ceramic tiles light shade 10 mm thick (Square/ Rectangular) polished, area of each tile not exceeding 0.36sqm in skirtings/dado etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including screed bed or bedding layer in cement mortar 1:4, 10 mm thick, complete all as specified and as directed. Make : Johnson / Nitco / Asian Granito / Varmora / Orient Bell

M&L for preparing old / new plastered surfaces of internal walls / ceilings and application of wall care putty (any number of coats required) and sand papering till obtaining smooth surface complete all as specified and as directed. Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

M&L for preparing newly plastered surfaces of internal walls and applying two coats of Acrylic Distemper over one coat of alkali resistant primer complete all as specified and as directed. Make for Distemper : Asian / Nerolac / Berger ( All 1st quality)

Complete removal of existing treatment on walls / ceilings, preparing surfaces and applying two coats of Acrylic Distemper over a coat of alkali resistant priming paint complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality)

Demolition of reinforced cement concrete ( reinforcement cut as required to facilitate demolition )in any floors/ roofs,beams, stair cases , Landings , Chajjas and similar suspended articles and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for Reinforced Cement Concrete Type A1 1:11/2:3 (using 20 mm graded stone aggregate) for in Beams, cantilevers, lintels over 1.5 M span etc and the like complete all as specified and as directed.

Use and waste of Fair finished flat Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc. complete all as specified and as directed.

M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M&L for Mild steel TMT bars 5 to 10 mm dia., and over cut to length, bent to shape required, as in stirrups, spacers and binders including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Supply only Integral water proofing compound [ISI marked] complete all as specified and as directed. Make : Acco proof / Impermo / Lik proof / Scott No. 1

M&L for Rendering in two coats with one coat of 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finishing coat with 5mm thick in cement mortar 1:4 finished even and smooth without using extra cement including mixing of water proofing compound complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately under relevant item.

M&L for Rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of weather proof Acrylic Exterior emulsion paint of approved make and shade over a coat of approved primer as recommended by the manufacturer complete all as specified and as directed. Make : (i) Weather coat paint :Apex ULTIMA from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux

Dismantling of existing Aluminium Partitions including Prelaminated particle board and glass complete all as specified and as directed.

S&F Powder coated Aluminium frame for doors, windows, ventilators, [ ISI Marked ] fixed partitions etc., with one or more rebates with powder coating of minimum 50 micron thick including joining cleat for fixing etc., complete all as specified and as directed. Make : Jindal / Indal / Hindalco

S & F Aluminium window and ventilator shutters, sliding type without sash bar with powder coating of any colour of minimum 50 micron thick,, aluminum section weighing 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such as handles, locks etc., complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

S & F Aluminium window and ventilator shutters, fixed type without sash bar with powder coating of any colour of minimum 50 micron thick,, aluminum section weighing 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws,etc complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

S&F 125 mm long [ ISI marked ] medium weight, medium weight, Stainless steel Butt hinges complete all as specified and as directed.

S& F 150 mm long Extruded Aluminium alloy handles [ ISI marked ], fabricated type, anodised complete all as specified and as directed .

S & F 100 mm, 4 Levers, Brass Mortice Lock, vertical Type of Godrej make complete all as specified and as directed.

S&F floor door stopper, aluminium alloy body and tongue anodised with hard drawn steel spring of 140mm size overall complete all as specified and as directed.

S & F 300 mm long [ISI marked] Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and as directed.

S & F 200 mm long [ISI marked] Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S & F 7 mm thick Aluminium grill of make "Deco grill" and DG - 104 model fitted in to suitable Aluminium channel and fixed to windows / ventilators including cost of aluminium channel complete all as specified and as directed. Make : Jindal / Indal / Hindalco

M&L for 12 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed with screws to frame work in partitions, shelves, cup boards, door panels etc. complete all as specified and as directed. Make : Anchor / Novopan / Deco Board / Bhutan Board / Kitply / Eco Board / Archidlam / Asis / Greenply Industries

S & F Aluminium anodised snap grid frame work for false ceiling of grid size 605 x 605 mm with Aluminium "T" section of size 38 x 25 x 1.50 mm thick for main runners, 25 x 25 x 1.5 mm thick for cross runners and angle of size 25 x 25 x 1.50 mm thick along the walls suspended with and including 4 mm dia., Galvanized mild steel wire (as in suspenders of ceiling members fixed in proper position) including providing and fixing Gypsum Board 12 mm thick in ceiling fixed with screws as per manufacturer's instructions and applying two coats of plastic emulsion paint over a coat of primer over two coats of putty including sand papering till obtaining smooth finish complete all as specified and as directed. Make :(I) Make of Gypsum Board : M/s India Gypsum, M/s Saint Gobain (ii) Make of Putty : JK white cement / Birla wall care / Jenson & Nicholson (iii) Plastic Emulsion paint : Asian / Nerolac / Berger ( All 1st quality)

M&L for point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLS (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore medium grade (ISI marked) concealed including Flush type metal GI boxes for fixing modular type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductor cable FRLS [ISI marked] as earth wire connected to common earth dolly and earth in distribution board including taking down existing point wiring and making good the disturbed surface complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one switch. Make of Cable : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables Make of Conduit : Avon Plast,Precision, Finolex all are ISI marked.

All as per item No. 43 above but for one 3 pin socket outlet 5 amps on independent board complete all as specified and as directed.

All as per item No. 43 above but with 2.5 Sqmm FRLS copper cable for one 15 Amps power point including 2.5 Sq mm FRLS copper conductor cable as earth continuity conductor and connecting it to earth dolly complete all as specified and as directed.

All as per item No. 43 above but with 4.0 Sqmm FRLS copper cable for one geyser / AC / water cooler point including 4.0 Sq mm FRLS copper conductor cable as earth continuity conductor and connecting it to earth dolly complete all as specified and as directed. Note for item Nos 43, 44, 45 & 46 (i) The rate quoted is inclusive of making good the disturbed surfaces and finishing the same with the surface finish of adjoining surface. Note (ii) : Make of Cable : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables Note (iii) Make of Conduit : Avon Plast,Precision, Finolex all are ISI marked.

S&F Sheet metal enclouser single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 amps capacity complete all as specified and as directed. Make : INDO ASIAN / STANDARD / HAVELLS

S&F switch piano Flush type, single pole one way 5 amp 230 volts 50 HZ complete all as specified and as directed. MAKE : ANCHOR, BAJAJ, LEADER AND CONA [ ALL ISI MARKED]

S&F ceiling rose surface bakelite 63 mm dia two to three terminals complete all as specified and as directed. MAKE : ANCHOR, BAJAJ, LEADER AND CONA [ ALL ISI MARKED]

S&F switch socket combine 2 in 1 5A flush type AC 230V, 50 HZ complete all as specified and as directed. MAKE : ANCHOR, BAJAJ, LEADER AND CONA [ ALL ISI MARKED]

S & F Switch socket combination 3 pin, 15 A flush type complete all as specified and as directed. MAKE : ANCHOR, BAJAJ, LEADER AND CONA [ ALL ISI MARKED]

S&F Recessed mount LED down lighter 2' x 2', 36 W Ultra modern designed architectural LED luminaire which provide soft light and glare free symmetrical illumination suitable for Armstrong ceiling grid complete all as specified and as directed including connecting up with twin core twisted flexible copper conducotr cable with suitable size of make Havells cat VENUSNEOHE4XPLR 28-36 W LED830MOD or its equivalent in Crompton/Bajaj/Philips.

S&F Ceiling fan 1200mm sweep, 230/240 Volts AC BEE 5 Star rated complete with electronic type regulator and accessories complete all as specified and as directed. Make : Crompton Greaves / Bajaj / Usha

M & L for Sub main wiring with 2 runs of 6 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of 20mm dia along with one run of 6.0 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly including taking down old / perished sub main wiring and making good the disturbed surface complete all as specified and as directed. Note: Two runs 6 Sq.mm. cable, one run of 6 Sq.mm cable and one run of PVC conduit will be measured as one unit. MAKE :(i) Make of Cable : Finolex/Polycab/Plaza/Gloster/Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

S&F Distribution Board, SPN 8 Way ,Double door 240V with 200Amps rated bus bar complete all as specified and as directed. Make : Indo Asian cat part No. 811807[Optipro] / Standard / Havells

S & F MCB SPN 63 Amps, 240 Volts, C Curve Make : Indo Asian / STANDARD / HAVELLS / L&T / C&S / Schneider / Legrand

S & F MCB SP 6 to 32 Amps, 240 Volts, C curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811122 to 811129 / L&T / C&S / Schneider / Legrand

Supply and install hi wall split units indoor / out door complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with Eco Friendly R 410 A Refrigent gas minimum 3 star rating and ISEER 3.99 of capaccity 2 TR complete all as specified and as directed. Make : Carrier / Blue Star / Hitachi

Supply and Fix wall mounted voltage stablizer for automatic operation single phase naturally air cooled indoor type and design for input variation between 170V to 250V with accuracy +/- 2.5% and of 5 KVA capacity complete all as specified and as directed. Make : V Guard / Servo / Kee line

Sri Shiridi Sai Engineering

K K INFRA

SRI VENKATA SAI MANIKANTA CONSTRUCTIONS

SRI THULASI TECH

P SRINIVASA RAO

PRADEEP ENTERPRISES