Conversion of old 66 kV building into office building of safety department in FACT Udyogamandal.

Amount

Dismantling and removing carefully the existing brick/rubble/laterite masonry in cement mortar at all levels and conveying and depositing the debris and stacking the serviceable material at places pointed out within a distance of 150m.

Dismantling and removing the existing CC/RCC works and conveying and depositing the debris at places pointed out within a distance of 150m as directed by Engineer-in charge.

Dismantling and removing carefully the existing RCC structures like slabs, beams and columns etc. at all levels without damaging other parts of the building/ structures and conveying and depositing the debris and stacking the serviceable material at places pointed out within a distance of 150M

Dismantling carefully the structural steel work of all types at all heights and stacking the serviceable materials at places pointed out within a lead of 150m as per direction of Engineer - in - charge.

Dismantling and removing doors with or without ventilators, including removal of shutters, hinges, hold fasts and all other fittings and stacking materials in Carpentry shop or MCD as directed.

Dismantling and removing windows with or without ventilators including removal of shutters, hinges, hold fasts and all other fittings and stacking materials in Carpentry shop or MCD as directed.

Dismantling and removing ventilators including removal of shutters, hinges, hold fasts and all other fittings and stacking materials in Carpentry shop or MCD as directed.

Dismantling carefully the tile work & plastering in wall including stacking material within 50 metres lead.

Earth work excavation in all classes of soil except hard rock requiring blasting for foundation trenches, drains, column footings, equipment foundations etc. not exceeding 1.5m in width or 10sq.m on plan,including filling in basement and sides of foundation with the spoil earth in layers,breaking clods, watering, ramming and consolidating and conveying and depositing the excess spoil or filling in low lying area and levelling within an initial lead of 50M and lift upto 1.5M, etc.complete .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).

Brick work in CM 1:5 with country burnt bricks (21x10x6.5cm or nearest size) for superstructure upto 5M height from the plinth level.

Centering and shuttering including strutting, propping etc. and removal of form for all heights for Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for all heights for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for all heights for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Supply of Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete at all levels. With Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying in position ready mixed M-30 grade concrete for reinforced cement concrete works upto plinth level , using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,improve workability without impairing strength and durability as per direction of the Engineer-in-charge.(Note :- Cement content considered in this item is @ 340 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately)

Providing and laying in position ready mixed M-30 grade concrete for reinforced cement concrete works above plinth level upto floor V level, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,improve workability without impairing strength and durability as per direction of the Engineer-in-charge.(Note :- Cement content considered in this item is @ 340 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately)

Add for using extra cement in the items of design mix over and above the specified cement content therein.

12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand)for height upto 10m from ground level.

Providing and laying vitrified floor tiles in Size of Tile 600x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and laying Vitrified tiles in Size of Tile 600x600 mm(thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to IS:15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigmentsetc. complete.

Providing and laying anti skid ceramic floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.

Cleaning and applying priming coats with water thinnable cement primer of approved brand and manufacture, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre on all surface.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour,One coat - of exterior grade.

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.One coat

Supplying and fixing pure polyester powder coated coloured aluminium frame work of extruded sections and approved brand/manufacturer including mitring the joints, fixing the frame work with necessary screws, drilling holes in floors, walls and ceiling, providing plugs for fixing screws, finishing the sides of packing between frame work and wall/ceiling with plaster of paris, cost of timber packing if necessary, rubber lining for air tightness, providing corner cleats, etc. complete as per standard practice for glazed doors, windows, side hung as well as sliding windows, ventilators, partitions etc. including all hinges, pivots, tower bolts, peg stays, fixtures, and pure polyester powder coated aluminium approved brand beadings, handles & approved locking system at all levels.(Payment will be given for the weight of aluminium sections only)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):With toughned glass panes of 4.0 mm thickness

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):With toughned glass panes of 5.5 mm thickness.

Supplying and fixing best quality multiwood of "Thomson " brand or equivalent of 6 mm thick

Supplying and fixing at all levels FRP doors with frames & 4mm etching glass made of glass fibre conforming to IS: 11551 (As per attached technical specifications).

Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS:3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar tap, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.

Providing and fixingC.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore : 15mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40 mm dia.

Supplying, laying, jointing & hydrostatically testing ISI marked PVC pipes conforming to IS 4985 and all required PVC specials such as tees, bends, elbows, unions, reducers, adapters, coupling etc., as per IS 7834 or IS 10124 as the case may be, including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers, ferrule, pipe supports, etc., hire of tools and plant, cost and conveyance of water for testing etc. complete so as to withstand the internal design pressure of 10 kg/cm2 - For external lines-25 mm or nearest OD

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore .

Supplying and fixing P.V.C. pipes conforming to IS 4985 class II- 4kg/sq.cm pressure for waste water lines with all required specials such as plain bends, single junctions, elbows, unions, etc. including cutting masonry or concrete floors, etc. wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with clamps screwed in to masonry wherever required etc. complete-63mm or nearest outer dia.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Suppling and fixing 600 x20 mm or nearest Stainless steel heavy duty approved brand towel rod with brackets with necessary SS screws, pastic grips etc. complete

Supply and fixing stain less steel hanger unit having min 3 hooks

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing at all levels Health faucet with wall hook and 1.5m SS braided rubber hose pipe of product code of Hindware (product: F160023) or equivalent model from Cera, Parryware and angle stop cock of grohe (code : 2201600M flow rate≤ 5 litres per minute) including fitting, cutting and making good the walls etc. complete.

Supplying and fixing white glazed vitreous china flat back lipped front urinal of size 430x380x230mm or nearest size (Indian make best quality ) with 1 no. 15mm pvc heavy type connection with CP learning nut and 1 no. 15mm CP regulating valve(Jauger or equivalent) of superior make , CP spreader with flush pipe , fixing the urinal to wall with necessary wooden plugs & iron screws including cutting and making good the walls etc. complete

Supplying and fixing 89 mm OD, PVC rain water spouts of pressure class 4 kg/sq.cm 500 mm long over roof/ sunshades etc. at all levels after removing the existing damaged spout and grouting etc. complete as per instructions.

Supplying Ferro cement septic tank of 30 users capacity having wall thickness 60mm or nearest including installing in position with all necessary pipes and fittings and making connection with the waste line inclusive of cost of all material and labour complete.

Supplying and fixing PVC pipes conforming to IS 4985-2000 class II - 4kg/cm2 for soil waste and rain water lines with all required specials such as plain bends, single junctions,elbows, crosses, unions, shoes, door bends, double junctions, vent cowls etc. with or without door including cutting masonry or concrete floors , sunshades etc wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer etc. complete - 110mm or nearest OD .

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. up to 5Km distance.

T K SALIM (BID ID -3065857)