(A) Electrical General work for Lighting Arrangement of LHS/RUB against 34 Nos. LC Gate under the jurisdiction of DEE/G/KIR. (B) Electrical General work for Lighting Arrangement of LHS/RUB against 17 Nos. LC Gate under the jurisdiction of ADEE/G & CHG/NJP.

jurisdiction of ADEE/G&CHG./NJP)

Item- 1 Please see item breakup for details.

S No. Item Description of Item Unit Qty Rate Amount

1 1 Supply, installation, testing & commissioning of Numbers 170.00 13091.00 2225470.00

swaged type GI tubular pole 9 mt long conforms

to IS - 2713/1980 with following technical

specification and complete with base plate and

cap: - (a) Length of section : - Bottom - 5 mt,

Middle - 2 mt, Top - 2 mt (b) Outside diameter

and thickness of section : - Bottom - 114.3 x

4.50 mm, Middle - 88.9 x 4.05 mm , Top - 76.1 x

2 2 Supply & testing of GI octagonal pole 6 mt long Numbers 221.00 14193.00 3136653.00

with foundation bolt, loop box of bakelite sheet

with one 6A SP MCB and 16 sq mm stud type

connector etc. The octagonal pole shall be hot

dip galvanized in single dip. Technical

specification of pole as following:- Height - 6 mt

Top dia (A/F) - 70 mm Bottom dia (A/F) - 130

mm Sheet thickness - 3 mm Base plate (L x B x

T) - (200 x 200 x 12) mm Foundation Bolt size

(no.x dia) - 4 x 20 dia mm Pitch Circle Dia (PCD)

- 200 mm Bolt length - 600 mm Projected Bolt

Length - 100 mm .

3 3 Supply & fixing of 1 mtr GI Single arm bracket Numbers 221.00 1615.00 356915.00

(header) and holder with Nut & bolt as per

instruction of Engineer incharge at site.

4 4 Erection of Rail/Tubular/Octagonal pole to 1/5 th Numbers 391.00 1712.00 669392.00

of its height with CC foundation from base block

(30 cm x 30 cm x 15 cm) including digging &

refilling of earth to a height of 30 cm above

ground level as per drawing

no.CEE/OH@47'40@FGA) in ratio 1:3:6 by

cement sand & Chips 19 mm & down including

excavation of earth.

5 5 Supply, installation, testing & commissioning of Numbers 255.00 4802.00 1224510.00

60 watt LED street light luminaire with heat

resistant glass with connecting lead (IP

protection- IP 66 class-I, System efficacy 120

lm/w, Housing- Pressure die cast aluminium

powder coated, THD<10%, p.f.>0.95) as per

instruction of Engineer Incharge at site.

KATIHAR DIVISION-ELECTRICAL/N F RLY

6 6 Supply, installation, testing & commissioning of Numbers 680.00 1265.00 860200.00

10 watt LED Bulkhead luminaires, IP65 with

cage as per instruction of Engineer incharge at

7 7 Supply, fixing, testing & commissioning of rigid Metre 3400.00 26.00 88400.00

PVC conduit pipe of 25 mm dia, Medium

mechanical strength. The pipe should be fixed

with with clamps as per instruction of Engineer

Incharge at Site.

8 8 Supply, wiring & testing of main wire by 6 sq Metre 3400.00 100.00 340000.00

mm, Single Core FR-LSH PVC Insulated Industrial

Grade Copper Conductor (Unsheathed) Flexible

Cables, 1100 Volts and earth continuity wire by

1.0 sq mm FR-LSH PVC Insulated Industrial

Grade Copper Conductor Conforming to IS: 694

through PVC rigid conduit pipe/polythene pipe

not less than 20 mm dia as per instruction of

Engineer incharge at site.

9 9 Supply, fixing, testing & commissioning of IP Numbers 102.00 5291.00 539682.00

66/67 thermoplastic cable junction box / loop

box of size (210 x 310 x 116) mm with

knockouts & 04 nos terminals as per instruction

of Engineer incharge at site.

10 10 Supply & Erection of earth by 50 mm dia 3 Mtrs. Numbers 68.00 4349.00 295732.00

long (3.6 mm thickness) GI pipe, 32x6 mm GI

strip- 5 Mtrs, GI nuts, bolts including masonry

materials for earthing pit, salt, charcoal,

soldered end terminal etc. and construction of

earth pit covered with RCC cover slab12.7 mm

thickness and watering pipe as per Drg. No.-

PCEE/ELG/DRG/2024/1 Date:- 30.09.2024 and as

per instruction of Engineer Incharge at site.

11 11 Supply, erection & commissioning of earth spike Numbers 221.00 366.00 80886.00

made of 16 mm dia 1.8 mt long GI rod &

connection metal body with the earth spike rod

by 6 SWG GI earth wire with nut, bolt & washer

12 12 Laying, commissioning & testing of HT/LT Metre 8925.00 55.00 490875.00

XLPE/PVC cable of different sizes partly along

the pole and partly through ground in cable

trench by excavation of ground below 1.5 mt

from ground level with suitable fixing

arrangement by MS clamp of size 50x6 mm and

suitable size nut, bolt. Loading, Unloading &

Carrying of cable to actual work site by

contractor's own arrangement. (Aluminium

Crimping Socket should be provided for each

Cable Termination). (Cable will be supplied by

13 13 Cable Trench Cutting of LT XLPE insulated Metre 5100.00 338.00 1723800.00

armoured, aluminium conductor cable, making

good the damages, end terminations with

aluminium crimping socket/plugs, provisions of

cable route markers, testing & commissioning

etc. as required as per technical specifications

of different size armoured cable as per

instruction of Engineer Incharge at Site.