SAC - SBM (U) 2.0

Earthwork in excavation for structures as per drawings and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal up to a lead of 50 mts dressing of sides as per Technical Specifications 305 MORD / 304 MORTH. (RBR-FNDN-1-A)

Collection, supply and Filling with Stone Crusher Dust (Finer than 3mm HBG m/c) in layers by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges etc., complete for finished item of work. (APSS NO. 309 & 310) (RBR - F NDN - 2)

Plain Cement Concrete (1:4:8) mix using 40mm hard granite machine crushed metal with OPC (Ordinary Portland Cement) including cost and conveyance of all necessary material, labour, curing for 7 days etc., complete. (BLD - CSTN - 2 - 5) for BED

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering. BLD-CSTN-2-13 - For Footings

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering. BLD-CSTN-2-13 - For Columns

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering. BLD-CSTN-2-13 - For Plinth Beam

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering. BLD-CSTN-2-13 - For Slab

Supplying, fitting and placing HYSD steel bars (Fe-415) reinforcement in position complete as per drawings and technical specifications including 5% for overlaps and wastage.BLD-CSTN-2-18

RR Masonry in CM (1:6) using rough stones, bond stones and CR stones with OPC including cost and conveyance of all materials and labour charges for mixing mortar finishing the layers, curing complete as per standard specifications. (BLD - CSTN - 4-9)

Brick masonry in CM (1:6), using Fly ash bricks with OPC including cost and conveyance of all necessary materials and labour charges, watering, curing etc., complete. BLD-CSTN-3-1

Plastering in CM (1:3) Prop, 12mm thick using OPC grade cement including cost and conveyance of all materials, labour charges, curing complete etc. BLD-CSTN-6-1

Flooring with Vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work. BLD-CSTN-7-5

Flooring with Non-skid red or white full body ceramic tiles of size 300x300mm and thickness 7-8mm 1st quality conforming ti IS:13711, set over base coat of CM (1:8), 12 mm thick, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work.

Colour washing Three coats with lime of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials. BLD-CSTN-9-8

SINGLE SIDE PRELAM SOLID PANEL PVC DOOR FRAME (CHOUKHAT) Providing and fixing factory made Pac single side Prelam door frame of the size 50X47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cutat two corners and joined with 2nos. of 150mm long brackets of 1515mm MS.Square tube. The two vertical door profiles are to be reinforced with 19X19mm MS. square tube of 19guage. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through the frame by using Pac fasteners. a minimum of 4nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacture specification and irection of Engineer-in-charge. (BMT-N.05)

Providing and fixing 35mm thick BRAND FACTORY MADE MOULDED DOOR SHUTTER consisting of sold core single leaf flush door of 30mm thickness, lipped with 15mm (5mmX3) thick X 30mm width on one stiles and top rails and 10mm (5mmX2) thick X 30mm width on the other stiles and bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in different panel and / or prelam colours on one side after routing the moulded designon flush door and 2mm prelam Pac sheet on other side using rubber adhesive on flush door and solvent cement adhesive on Pac lipping etc. complete as per direction of Engineer-inCharge, manufacture specification and drawing. (BMT-N.06)

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 630 mm x 450 mm. (BMW-D.05)

Providing Brick masonry seat for Orissa pan/ Indian W.C. using 2nd class bricks as per standard practice. P123/141/SSR2019-20 (BMW-D.09)

Providing Cement Concrete Squatting plate for Orissa pan/ Indian W.C. in P.C.C. 1:2:4 as per standard practice. (BMW-D.10)

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes. P132/335/SSR2019-20 (BMW-G.01)

Supply and fixing 22.20mm OD CPVC Pipe including cost and conveyace etc., complete. (BMW-I.221)

Supplying & Fixing Indian make Flat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:29631979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Single C.P. Pillar cock (BMW-D.26)

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 305 mm (BMW-D.34)

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS. (BMW-D.33)

Supply and Transportation of 1.0HP (25x25mm) Single phase Mono block CI body motor pumpset confirms to IS 9079:2002. (ELEC-5.4.11.b)

S&F 12.7 mm N.P bib tap Indian make heavy dutys Long body (BMW-E.07)

Supply and Fixing of 20mm dia 1.55mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete. 1.4.1 (b)

Supply and run of 2 of 14/0.3mm (1.0 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete. 3.1.1

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. 2.1.1

Earthwork in excavation for structures as per drawings and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal up to a lead of 50 mts dressing of sides as per Technical Specifications 305 MORD / 304 MORTH. (RBR-FNDN-1-A)

Collection, supply and Filling with Stone Crusher Dust (Finer than 3mm HBG m/c) in layers by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges etc., complete for finished item of work. (APSS NO. 309 & 310) (RBR - F NDN - 2)

Plain Cement Concrete (1:4:8) mix using 40mm hard granite machine crushed metal with OPC (Ordinary Portland Cement) including cost and conveyance of all necessary material, labour, curing for 7 days etc., complete. (BLD - CSTN - 2 - 5)

Providing Nominal mix (1:2:4) P.C.C grade M-20 concrete using 20 mm nominal size Graded hard stone aggregate with OPC, mechanically mixed, placed and compacted by vibration including curing for 21 days complete as per drawings and technical specifications. RBR-FNDN-4-5

Brick masonry in CM (1:6), using Fly ash bricks with OPC including cost and conveyance of all necessary materials and labour charges, watering, curing etc., complete.

Plastering in CM (1:3) Prop, 12mm thick using OPC grade cement including cost and conveyance of all materials, labour charges, curing complete etc. BLD-CSTN-6-2/54

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering. BLD-CSTN-2-13 For Slab

Supplying, fitting and placing HYSD steel bars (Fe-415) reinforcement in position complete as per drawings and technical specifications including 5% for overlaps and wastage.BLD-CSTN-2-18