GE/J/A 2021-22(9017/E8)

Amount

Dismantling of posts or struts ( wood ,steel or RCC) any section ,including taking out embedded in concrete portion and making good disturbed ground, complete all as directed.

Excavation in post holes(or similar holes) each n.exc 0.5 cum, getting out, returning filling in ramming earth arround layers n.exc 25 cm watering & removing surplus soil to a distance n.exc 50 mm & making good surfaces in loose /soft soil, complete all as specified and as directed.

S&F MS angle iron as in fencing post/gate including fabrication for hole for fixing the nut and arrengement for fixing barbed wire, complete all as specified and as directed.

S&F MS flat iron securing bolts posts and struts in fencing incl holes(for securing wire mesh etc) incl drilling bolting or revating, complete all as specified and as directed.

S&F mild steel bolts(machine made) with hexagonal or square heads at one ends each screw end to be filled with washers and one hexagonal nuts of 16 to 20 mm dia of shunk, complete all as specified and as directed.

M&L cement concrete type C2(1:3:6) using 40 mm graded stone agg foundation filling as fixing of RCC fencing post incl form work if necessary all as specified & directed incl lean conc of gate pillars, complete all as specified and as directed.

S&F MS mild steel 10 mm dia round bar cut to length incl straining & welding in horizontal bar for securing chain link fencing, complete all as specified and as directed.

Dismantling of old barbed wire, complete all as directed.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing & straining & fixing to any type of strandard rails straining bolts incl securing or tying at crossing with & provision of galvanised mild etc, complete all as specified and as directed.

M&L M/S Surface of any description , over 10 cm width or girth applying two coat of synthetic enamelpaint over a coat of red oxide primer including prepration, complete all as specified and as directed.

Dismantling of old chanin link fencing, complete all as directed.

S&F chain link fencing, complete all as specified and as directed and directed by engr-in-charge

M&L removig excavated material n exc 50 m and depositing where direced at a level n exc 1.5 m above the starting point, complete all as directed.

Excavation in trenches for fdn n.exc 1.5m wide and n.exc 1.5m in depth & getting out in soft /loose soil, complete all as specified and as directed.

Demolition of cement concrete (un -reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed.

M&L 50 mm thick PCC (1:3:6) type C1 usig 20mm gradde aggregate as in plinth protection, complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 as in foundation filling or mass concrete, complete all as specified and as directed.

M&L for 40mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) complete all as specified and as directed. Finished even & smooth w/o using extra cement, complete all as specified and as directed.

Supply only 38 mm wide 3 mm thick glass dividing strips, complete all as specified and as directed.

M&L for chequered cement concrete tiles 20x20x2.5cm thick set and jointed in neat cement slurry in floor over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engg. In charge.

S&F machine made precast cement concrete blocks (interlocking paves) colour rubberised 60mm thick with 6mm top layers of ante abrasive material laid over 25mm thick sand cushion . The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 350 Kg/Cm2, complete all as specified and as directed.

S&F machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C2 (20mm stone agg) all as directed by Engr-in-Charge..

M&L for chequered cement concrete tiles colour rubberised set and jointed in neat cement slurry in floor over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engg. In charge.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 floor finished even & rough to recievr tiling/floor finish, complete all as specified and as directed.

M&L for joint free non skid colour ceramic tiles of size joint free area exc 0.11 sqm but nexc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including, complete all as specified and as directed.

M&L for colour ceramic tiles of size joint free area exc 0.11 sqm but nexc 0.18 sqm as in skirting / dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white cement including 10mm thick rendering in CM 1:4 as backing coat, complete all as specified and as directed.

M&L of 20-25mm thick KOTA stone slab, machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and mirror polishing, complete all as specified and as directed.

All as per above item No 27 but skirting/dado including 10 mm thick plastering in Cm 1:4, complete all as specified and as directed.

M&L 16-18 mm thick granite of any work step, rise, platform etc. in cement mortor 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including 15 mm thick in CM 1:6 screed bed, complete all as specified and as directed.

M&L 18 to 20 mm thick machine cut polished Baroda Green Marble (Table rubbed and polished) in steps, risers, jambs, window cills, cooking platform etc. and like over and including 15 mm thick cement mortar 1:4 including pointing in white cement using marble dust with admixture of pigment to match the shade of marble, complete all as specified and as directed.

Grinding and polishing to edges and rounding off granite slab etc.for smooth finish, complete all as specified and as directed.

Demolition of Brick work , pcc block ,stone masonry built in cement mortar, complete all as specified and as directed.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and as directed.

All as per above item No.33 but except stone, complete all as specified and as directed.

Extra over for hammer dressing to face stone with max depression on face from a streight edge not exc squarred rubble dressing face beds and joints as specified to squarred rubble, complete all as directed.

Racking out joints / Poitng tosquare rubble masonery jodhpur type reguler coursed built in cement mortar, complete all as specified and as directed.

M&L for keyed pointing square rubble masonery jodhpur type reguler course CM 1:3, complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone agg as in coping, complete all as specified and as directed.

Taking down cement plaster of any description on brick wall or stone masonary or concrete or RCC surfaces, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water, complete all as directed.

M&L for 15mm thick rendering in cm 1:6 on stone masonry finished even and smooth, complete all as specified and as directed.

M&L Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth, complete all as directed.

M&L for 10mm thick rendering in CM 1:3 over stone masonary surfaces incl finishing the surface fair & rough to receive tiling etc, complete all as specified and as directed.

Material and Labour glazed coloured ceramic tiles 350 x450 x 7 mm /350x250x7mm thick as in dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white cement, complete all as specified and as directed.

M&L preperartion of newly plastered surfaces of wall and applying three coat of white wash, complete all as specified and as directed.

Dismantling of expended metal ,any thickness or mesh, wt exc 4 kg per Sqm fix with steel or wood fillets if any, complete all as specified and as directed.

M&L steel rolling shutter thickness of lath 1.25 mm without wall wearing as spacified including top cover anchoring rod haps and staple and one soap coat of primer erected in position as included ,cmplete pus pull or manual type, complete all as specified and as directed.

Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and as directed.

M&L PVC false ceiling interlocking type 5mm thick plain/ coloured, with aluminium anodised snap grid frame work of size 60cmx60cm, including hanging arrangements with GI wire and adjusting level etc; complete all as specified in clause 10.38.1 of MES Schedule Part - 1, (including with PVC rawal plugs and steel screws as per manufacturers instruction) complete all as specified and directed by Engineer in charge.

Demolition of Precaste article and PCC block, complete all as directed.

S&F Pre cast cement cocrete post of size 60cm long 100mmx100mm, 1:2:4 Ty B-1 fixed in CM 1:4 with grooves for fixing of RCC jali, complete all as specified and as directed.

Providing pre cast cement concrete louvres and jali, 35mm thick ( measured solid) incld all moulding, excluding frame, PCC 1:2:4 type B-0 (12.5mm graded agg ) set in CM 1:4, complete all as specified and as directed.

M&L for welding in repair exc 2.5 cm but n exc 5 cm in length thickness of metal to be welded n exc 6mm, complete all as specified and as directed.

M&L PCC solid building blocks 10cm thick type B1 1:2:4 using 20mm graded aggregate set in cement mortat 1:4, complete all as specified and as directed.

Dismantling of asbestos cement / PVC ( corrugated , semicorrugated , etc ) sheet in roof covering, complete all as specified and as directed.

Pre- painted galvatumealuminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified as in repair, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description, complete all as specified and as directed.

S&F for mild steel work in tubuler posts , rafter, purline etc. including special shaped washer etc. complete using ERW or including butt welded tubes conforming to IS-1161-1976 grade st -240 , complete all as specified and as directed.

Framed work as in doors of MS angle iron with gusset plates, rails, braces, etc; complete drilled for fixing of door/Gates etc; to be prepared for hanging with and including hinges confirming to FE- 290 (Gde-E- 165), complete all as specified and as directed.

Preparation of old surfaces by Brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, to wall including cornices etc plaster or un- plastered surfaces (old decorated surface) and applying one coat of white wash all as specified and as directed by the Engineer-in Charge.

All as per above item No 59 above but on ceiling, complete all as specified and as directed.

All as per above item No. 59 but one coat of colour wash on walls, complete all as specified and as directed.

M&L Preparing of old plaster surfaces of wall by Brooming down or steel wire brushing, scrapping down mass and efflorescent salts and trading oil & greasy spots, washing rubbing down and stopping and applying one coat of oil bound distemper over a coat of birla white putty on wall, complete all as specified and as directed.

Preparation of old plastered or un- plastered surfaces of wall by Brooming down or steel wire brushing, scrapping down mass and efflorescent salts and trading oil & greasy spots, washing rubbing down and stopping surfaces and applying one coat of cement base paint (swocem) of approved quality & tint, complete all as specified and as directed.

M&L preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (FIRST QUALITY) of any tint all as specified and as directed by the Engineer-in-Charge.

M&L preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (First quality) of any tint all as specified and as directed by the Engineer-in-Charge.

M&L rewriting or repainting of existing letters or figures ( Block, Roman, Italian or Indian) n. exc. 30 cm high, complete all as specified and as directed.

M&L preperartion of newly plastered surfaces of wall and applying two coat of putty & applying two coat of oil bound distemper, complete all as specified and as directed.

M&L preperartion of newly plastered surfaces of ceilling and applying three coat of white wash , complete all as specified and as directed.

M&L two coat of colour wash on newly plastered/ unplastered surfaces over one coat of white wash on wall & including preparation, complete all as specified and as directed.

Disconnectig existing tanks (exc 250 nexc 500 ltr) , setting aside ( or lovering if required ) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position . (cleaning repairing, etc. measured serately), complete all as specified and as directed.

M&L Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, with bleaching powder and cleaning chemical etc complete, complete all as specified and as directed.

Note for all above items:-All items in BOQ are for"Materials and labour /Supply and fix" and to be executed in "Repairs i.e incl takng down old items" unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are required to quote their rates accordingly.

BEYLIM INFRA

M/S KAUTILYA GARG

mahalaxmi enterprises

M/S SUMAN ENTERPRISES

chhaba construction