REPAIR AND MAINT OF FURNITURE FOR CANING, POLISHING AND MISC WOODEN FURNITURE ITEMS AT AFS JODHPUR

Amount

CHAIR DINING - FD-228,262,279 & 1105 :- S & F of following existing old broken wooden components of chair dining similar items carefully without disturbing the adjoining parts and new components made out of first class Indian Teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, glueing,placing every part in-tact all as specified in Drg and directed by Engr - In Charge.

Top back rest

Bottom leg stiffener

Front legs

Rear Legs

Seat Member/Seat Rail

Rubber/PVC shoes

M&L for preparation of wooden surfaces of chair dining by scraping with sand paper, redusting and apply putty wherever required and polishing the surface with french polish to get glossy finish all as directed by Engr-in-Charge.

CHAIR EASY: FD-229 & 358 :- S & F of following existing old broken wooden components of chair Easy similar items carefully without disturbing the adjoining parts and new components made out of first class Indian Teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, glueing,placing every part in-tact all as specified in Drg and directed by Engr - In Charge.

Rear legs

Front Legs

Seat bottom Rail

Seat Member/ Seat Rail

Back Member/ Back Rail

Rubber/PVC shoes

M&L for preparation of wooden surfaces of chair Easy by scraping with sand paper, redusting and apply putty wherever required and polishing the surface with french polish to get glossy finish all as directed by Engr-in-Charge.

CHAIR WRITING:-FD-250, 261, 280 & 1107 :- S & F of following existing old broken wooden components of chair writing similar items carefully without disturbing the adjoining parts and new components made out of first class Indian Teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, glueing,placing every part in-tact all as specified in Drg and directed by Engr - In Charge.

Back rest

Bottom Leg Stiffener

Front Legs

Rear Legs

Seat Member/ Seat Rail

Rubber/PVC shoes

M&L for preparation of wooden surfaces of chair writing by scraping with sand paper, redusting and apply putty wherever required and polishing the surface with french polish to get glossy finish all as directed by Engr-in-Charge.

RECANING OF WOODEN CHAIRS M&L for removing old unserviceable plastic cane form wooden chair and providing new white colour plastic cane 2mm to 2.5mm wide 0.40mm thick for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description of chairs( weaving shall be Godrej pattern) and all as directed by Engr-in-Charge and as shown on drg .

Chair Dining:- FD-279,262,228,1105

Chair Writing:-FD-261,280,250,1107

Chair Easy:-FD-229,358

TABLE 3'X2' (900 X 600 X 760MM) WITH DRAWER/WITOUT DRAWER (FD-223/224/283/1007/1008)

Repair of table with or w/o drawer replacement of unserviceable top with commercial particle board 19mm thick as per Drg of Make-CENTURY PLY/ACTION TESA/BHUTAN BOARD ISI Marked with Ist class HW teak wood beading 6mm thick including polishing (two or more coats over a coat of wood filler etc).

All as per Item No. 7.01 but replacement of table frames long rail with S&F new table frames long rail made out of Ist class HW teak wood complete all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 7.01 but replacement of new drawer made out of Ist class hard wood (Teak Wood) with aluminium anodized 35mm/40mm dia knob complete all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 7.01 but replacement of table frames short rail with S&F new table frames short rail made out of Ist class hard wood (Teak Wood) complete all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 7.01 but replacement of bottom centre stiffener with S&F new bottom centre stiffener complete made out of Ist class hard wood (Teak Wood) all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 7.01 but replacement of new aluminium anodized 35mm/ 40mm dia knob complete all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 7.01 but replacement of rubber shoes with S & F new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.

Supply and fixing in repair new legs made out with Ist class hard wood as per existing or as per Drg polishing with French polish (two or more coats) over a coat of wood filler after preparation of surface etc.

TABLE DINING 6 PERS (FD-239/273/115) Repair to table dining 6 pers including dismentalling/removal of all broken parts and replacing with new parts of well seasoned Ist class Teak wood free from pits & Knots as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board shade and texture as approved by engineer in charge with matching Indian Teak wood edging.Make:-CENTURY PLY/ACTION TESA/BHUTAN BOARD

Leg made out of Ist class Teak Wood

Long Rail made out of Ist class Teak Wood

Short Rail made out of Ist class Teak Wood

Teak wood corner size 75mm x 75mm to table between legs and rails fixed with screw

Centre stiffner made out of Ist class Teak Wood

Rubber/PVC shoes

Scratching the entire wooden pallets of table dining filling puty to the bore holes making surface smooth by scratching it with an electric grinder and shall be with french polish complete all as specified under directed.

TABLE CENTRE (FD-235/274) The following repair shall be carried out to Table centre after removing old UNSV parts and replacing with new parts of well seasoned Teak wood free from pits & Knots as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board exterior grade with Indian Teak wood as all around Make:-CENTURY PLY/ACTION TESA/BHUTAN BOARD

Leg made out of Ist class Teak Wood

Long Rail made out of Ist class Teak Wood

Short Rail made out of Ist class Teak Wood

Centre stiffner made out of Ist class Teak Wood

Rubber/PVC shoes

Scratching the entire wooden pallets of Centre table filling puty to the bore holes making surface smooth by scratching it with an electric grinder and shall be french polished in wallnut shade & finishing it with french polish complete all as specified under directed.

TEAPOY (FD-382/278) The following repair shall be carried out to Teapoy after removing old UNSV parts and replacing with new parts of well seasoned Teak wood free from pits & Knots as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board exterior grade with Indian Teak wood as all around Make:-CENTURY PLY/ACTION TESA/BHUTAN BOARD

Leg made out of Ist class Teak Wood

Rail made out of Ist class Teak Wood

Rubber/PVC shoes

Scratching the entire wooden pallets of Teapoy filling puty to the bore holes making surface smooth by scratching it with an electric grinder and shall be polished in french polish complete all as specified under directed.

TABLE 3'x3' (900x900) (FD-88/291/1009) Repair to table dining 3'x3' (OR's) including dismentalling/removal of all broken parts and replacing with new parts of well seasoned Teak wood as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board shade and texture as approved by engineer in charge with matching Indian Teak wood edging.Make:-CENTURY PLY/ACTION TESA/BHUTAN BOARD

Leg made out of Ist class Teak Wood

Long Rail made out of Ist class Teak Wood

Short Rail made out of Ist class Teak Wood

Indian Teak wood corner size 75mm x 75mm to table between legs and rails fixed with screw

Centre stiffner

Rubber/PVC shoes

Scratching the entire wooden pallets of Table 3'x3' filling puty to the bore holes making surface smooth by scratching it with an electric grinder and shall be polished in french polish complete all as specified under directed.

TABLE DINING 4 PERSON (1200X900) FD/MAP/09) Repair to table dining 4 pers including dismentalling/removal of all broken parts and replacing with new parts of well seasoned Teak wood as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board shade and texture as approved by engineer in charge with matching Indian Teak wood edging.Make:-CENTURY PLY/ACTION TESA/BHUTAN BOARD

Leg made out of Ist class Teak Wood

Long Rail made out of Ist class Teak Wood

Short Rail made out of Ist class Teak Wood

Indian Teak wood corner size 75mm x 75mm to table between legs and rails fixed with screw

Centre stiffner made out of Ist class Teak Wood

Rubber/PVC shoes

Scratching the entire wooden pallets of Table dining 4 person filling puty to the bore holes making surface smooth by scratching it with an electric grinder and shall be polished in french polish complete all as specified under directed.

SOFA CHAIR SINGLE SEATER WITH ARMS FD-281/1113 : Removing UNSV and S & F the following existing wooden components from sofa chair single seater with arms carefully without distrubing the adjoining parts made of first class teakwood well seasoned free pits & knots including tightening the joints, pinning, screwing, nailing, welding, glueing, placing every part in-tact complete all as specified and directed by Engr-in-Charge.

Cushion 100mm thick for seat & back 75 mm thick & 40 density Make-SLEEPWELL/KURLON (Kurlon Ltd) duly covered wirh tapestry cloth not less thatn Rs 350 per mtr quality and shade as approved by Engr-in-Charge/GE.

Arms made out of Ist class Teak Wood

Legs made out of Ist class Teak Wood

Batten made out of Ist class Teak Wood

Bearer made out of Ist class Teak Wood

M&L for preparation of wooden surfaces of sofa set single seater by scrapping with sand paper redusting and applying putty whereever required and policing the surfaces with french police two coat to get gloosy finishing all as directed by Engr-in-Charge

SOFA SET THREE SEATER SINGLE PIECE FD-281/1113 : Removing UNSV and S & F the following existing wooden components from sofa set three seater carefully without distrubing the adjoining parts made of first class teakwood well seasoned free from pits & knots including tightening the joints, pinning, screwing, nailing, welding, glueing, placing every part in-tact complete all as specified and directed by Engr-in-Charge.

Cushion 100mm thick for seat & back 75 mm thick & 40 density Make-SLEEPWELL/KURLON (Kurlon Ltd) duly covered wirh tapestry cloth not less thatn Rs 350 per mtr quality and shade as approved by Engr-in-Charge/GE.

Arms made out of Ist class Teak Wood

Legs made out of Ist class Teak Wood

Batten made out of Ist class Teak Wood

Bearer made out of Ist class Teak Wood

M&L for preparation of wooden surfaces of sofa set three seater by scrapping with sand paper redusting and applying putty whereever required and policing the surfaces with french police two coat to get gloosy finishing all as directed by Engr-in-Charge

REPAIR OF BED HARD M & L for removing old underviceable Ply wood top from Bed hard and S & F new plywood top 12mm thick BWR Gde of size 1900x850mm with suitable nut & bolt and all as specified and directed by Engr-in-Charge Make of plywood -Greenply/Kitply/Century ply

M &L for preparation of wooden surfaces of Bed Hard by scrapping with sand paper, redusting and applying putty wherever required and policing the surface with french police to get glossy finish and all as specified and directed by Engr-in-Charge

Vinayak Distributors

PRAFUL ENTERPRISES

SNEH CORPORATION

SK INDUSTRIES

shekhar & company

Shri Maruti Trading Co.