Work for Release of New Service Connection in EDSD Jhabrera under EDD Rural under EDC Roorkee

Supply (A)

Supply of Holding Clamp for ST/SP - 72 Pole

Supply of Holding Clamp for ST/SP - 55 Pole

Supply of Holding Clamp for PCC Pole

Supply of Holding Clamp for ST/SP - 33 Pole

Supply of Holding Clamp for J/I hook for AB Cable

Supply of Holding Clamp for ST/SP - 33 Pole for J/I hook

Supply of Stay Clamp for ST/SP 72 Pole with Nut & Bolts

Supply of Stay Clamp for ST/SP 55 Pole with Nut & Bolts

Supply of Stay Clamp for PCC Pole with Nut & Bolts

Supply of Stay Clamp for SP 33 Pole with Nut & Bolts

Supply of "F" Clamp for PCC Pole

Supply of Earth Wire Clamp for PCC Pole

Supply of Earth Wire Clamp for SP 33/55/72 with Nut & Bolts

Supply of Droper Clamp for PCC Pole

Supply of Shackle Insulator 75x90 mm with Nut & Bolts

Supply of Stay Insulator 75x90 mm

Supply of LT Clamp for PCC Pole

Supply of LT Clamp for ST/SP 33 Pole

Supply of LT Clamp for ST/SP 55 Pole

Supply of Aluminum Lug of Size 95 Sqmm for all HT & LT Side of T/F

Supply of Aluminum Lugs of Size 70 Sqmm for HT & LT Side of T/F

Supply of Aluminum Lugs of Size 150 Sqmm for HT & LT Side of T/F

Supply of Aluminum Lugs of Size 240 Sqmm for HT & LT Side of T/F

Supply of Aluminum Lugs of Size 400 Sqmm for HT & LT Side of T/F

Supply of Piercing Connector Suitable for 120-120 MM

Supply of Piercing Connector Suitable for 95-95 MM

Supply of Piercing Connector Suitable for 120-95 MM

Supply of Piercing Connector Suitable for 95-70 MM

Supply of Piercing Connector Suitable for 25-25 MM

Supply of J-Hook with Clamp Suitable for AB Cable

Supply of Dead End Clamp Suitable for AB Cable

Supply of Suspension Clamp Suitable for AB Cable

Supply of LT XLPE Cable 1x50 Sqmm

Supply of Al. Lugs 50 Sqmm

Supply of Mid Span Insulator J. Sleeve for LT ABC

Supply of Nut & Bolts off Size

Supply of 11 kV 3x70 Sqmm Jointing Kit I/D

Supply of 11 kV 3x70 Sqmm Jointing Kit O/D

Supply of PG Clamp Aluminium allow Dog to Dog with Nut & Bolts

Supply of PG Clamp Panther to Dog with Nut & Bolts

Supply of Bracing Clamp for SP 72 (Top) with Nut & Bolts

Supply of Bracing Clamp for SP 72 (Bottom) with Nut & Bolts

Supply of 33 kV VCB Clamp for Panther

Supply of 33 kV LA Clamp for Panther

Supply of 33 kV Isolator Blade

Supply of 33 kV Isolator Jaw

Supply of Single Phase Distribution Box

Supply of Three Phase Distribution Box

Supply of LT DB Holding Clamp with Nut & Bolts

Supply of 3x400 Sqmm 33 kV Striaght Through Jointing Kit

Supply of 3x300 Sqmm 33 kV Striaght Through Jointing Kit

Supply of 3x300 Sqmm 11 kV Striaght Through Jointing Kit

Supply of Jointing Kit for 3x300 Sqmm 11 kV XLPE Cable (I/D)

Supply of Jointing Kit for 3x300 Sqmm 11 kV XLPE Cable (O/D)

Supply of Jointing Kit for 3x300 Sqmm 33 kV XLPE Cable (I/D)

Supply of Jointing Kit for 3x300 Sqmm 33 kV XLPE Cable (O/D)

Supply of Jointing Kit for 3x400 Sqmm 11 kV XLPE Cable (O/D)

Supply of Jointing Kit for 3x400 Sqmm 33 kV XLPE Cable (I/D)

Supply of Jointing Kit for 3x400 Sqmm 33 kV XLPE Cable (O/D)

Supply of Jointing Kit for 3x185 Sqmm 33 kV XLPE Cable (I/D)

Supply of Jointing Kit for 3x185 Sqmm 33 kV XLPE Cable (O/D)

Supply of 3x185 Sqmm 33 kV Straight Through Jointing Kit

Supply of 3x185 Sqmm 33 kV Straight Through Jointing Kit

Supply of 3x185 Sqmm 11 kV Straight Through Jointing Kit

Supply of G.I. Pipe 6"

Supply of G.I. Pipe Dia 150 mm 4 mtr. Long

Supply of HDPE Pipe 50 mm

Supply of HDPE Pipe 150 mm Dia

Total (A)

Work (B)

Cartage of Following Poles from store to site with Loading/Unloading at both site & proper staking (Loading, Unloading & Carriage per Pole) 0-20 Km

STP SP 33

STP SP 55

STP SP 72

PCC Pole

Cartage of Following Poles from store to site with Loading/Unloading at both site & proper staking (Loading, Unloading & Carriage per Pole) 21-50 Km

STP SP 33

STP SP 55

STP SP 72

PCC Pole

Cartage of other material from store to site with Loading/Unloading at both site & proper staking per Qtl. 0-20 Km

Cartage of other material from store to site with Loading/Unloading at both site & proper staking per Qtl. 21-50 Km

Cartage of the following capacity T/f from store to site with Loading/Unloading at both site & proper staking (Loading, Unloading & Carriage per T/f) 0-20 Km

400 KVA/500 KVA

11 KV VCB (I/C, O/G), Bus Cupler, Panels/11 KV PRMC

33 KV VCB, Feeder Pannels (O/D), T/F Control Panel/33 KV PRMC

33 KV CT/PT/Isolator/CT-PT Combined Unit

Trolly DTR

Cartage of the following capacity T/f from store to site with Loading/Uunloading at both site & proper staking (Loading, Unloading & Carriage per T/f) 21-50 Km

400 KVA/500 KVA

11 KV VCB (I/C, O/G), Bus Cupler, Panels/11 KV PRMC

33 KV VCB, Feeder Pannels (O/D), T/F Control Panel/33 KV PRMC

33 KV CT/PT/Isolator/CT-PT Combined Unit

Trolly DTR

Head Load Cartage of Following Poles from road to site (Rates are per Pole/Km)

STP SP 33

STP SP 55

STP SP 72

PCC Pole

Head Load Cartage of small Material per km/Qtl. including loading & unloading

Head load cartage of Following capacity T/f (Rates are per T/f/Km)

Excavation of earth for Pole pit of size 0.9x0.6x1/6 of full length of Pole for erection of Pole in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil

Erection of following Single support Pole in proper level and alignment alongwith fixing of all accessories, like top channel & with all suitable Clamps

PCC Pole

Erection of following Double support Pole in proper level and alignment alongwith fixing of all accessories, like Top Channel, Dropper Channel, Base Channel including HT fuse Set, LT Fuse Set & with all suitable Clamps X-bracing & Clamps

PCC Pole

Erection of following Four Pole support in proper level and alignment alongwith fixing of all accessories, like top channel, X-bracing & Clamps

Grouting of Pole in size 0.45x0.45x1/9 of the support in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand) block including cost of Cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment and leveling

Muffing of Poles with CC 1:3:6 block & 45 Cm Height from ground level including cost of ballast, cement & sand etc.

Fabrication of M.S. Channel Angle iron after cutting in required sizes with drilling of holes upto good finish for top channel, bracking and special type bracket etc.

Fixing of bracket

Fixing of D-Type Bracket in Line

Fixing of Triangular Bracket in 11 KV Line

Fixing of Triangular Bracket in 33 KV Line

Excavation of earth for Stay pit of size 0.6x0.6x1.2mtr in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil

Fixing, tightening and nozzaling of Stay wire with stay insulator (for LT Line) with Pole and stay rod on required tension

LT Line

Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand) block including cost of Cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling

Erection and Earthing of support with M.S. Earth rod of 2.5 Mtr. long including excavation of pit and digging of M.S. Rod to proper depth and connecting the earth electrode with the help of G.I. wire

Laying, Sagging & Straighing of LT HT 11KV & 33 KV Line Complete work with GI Earth wire as 4th wire & 3rd wire of Following Conductor

ACSR Weasel

ACSR Rabbit

Raccoon

Dog (L.L. 11KV / 33 KV)

Panther (33 KV line)

Laying, Spreading, Stringing and Sagging of L.T. lines of the following wire as phase wire of G.I. earth wire complete with binding and jumpering

ACSR Weasel Conductor

3 phase 5 wire length

3 phase 4 wire length

2 phase 3 wire length

1 phase 2 wire length

ACSR Rabbit Conductor

3 phase 5 wire length

3 phase 4 wire length

2 phase 3 wire length

1 phase 2 wire length

ACSR Dog Conductor

3 phase 5 wire length

3 phase 4 wire length

2 phase 3 wire length

1 phase 2 wire length

Providing, Fixing and Painting of MS Bar (10mmx10mm) in block of 75x75 mm above 1800 mm height from toe wall of distribution transformer with necessary excavation and site condition, concreting for grouting vertical posts up to 450 mm in toe wall. The fencing shall comprise of one gate 1800 mm wide having two flaps with lock arrangement. Construction/repair of toewall also to be done as per site condition and the width of toewall is 254 mm & height from ground level 450 mm and 450 mm below the ground

Back Cartage of following Poles from store to site with loading/unloading at both site & proper staking (Loading, Unloading & Back Carriage per Pole) 0-20 Km.

STP SP 72

STP SP 55

STP SP 33

PCC Pole

Back Cartage of following Poles from store to site with loading/unloading at both site & proper staking (Loading, Unloading & Back Carriage per Pole) 21-50 Km.

STP SP 72

STP SP 55

STP SP 33

PCC Pole

Back Cartage of other material from store to site with loading/unloading at both site & proper staking per Qtl. 0-20 Km.

Back Cartage of other material from store to site with loading/unloading at both site & proper staking per Qtl. 21-50 Km.

Back Cartage of the following capacity T/F from store to site with loading/unloading at both site & proper staking (Loading, Unloading & Back Carriage per T/F) 0-20 Km.

Back Cartage of the following capacity T/F from store to site with loading/unloading at both site & proper staking (Loading, Unloading & Back Carriage per T/F) 21-50 Km.

Guarding of line over (Telephone/Road/L.T. line crossing with 6/8 SWG G.I. wire including fixing of guarding channel/angle

Construction of transformer plinth with size 2×2×1.1 Mtr. above ground level and 0.6 Mtr. below ground level and toe wall of size 4×4×0.2 Mtr. above ground level and 0.2 Mtr. below the ground level for installation of wire mesh/distribution board including the cost of material such as cement, brick, ballast, sand etc.

Excavation of earth of size 2.1X2.1X1.2 mtr

Cement Concreting work in ratio 1:4:8

Brick work in 1:4 ratio

RR Massonary work in 1:6 ratio

RCC work of 1:2:4 ratio 15 cm thickness

Cement plaster on side walls in 1:4 ratio

Back cartage of combined CT PT unit

Back cartage of 33/11 KV metering cubical

Laying and erection of LT PVC Cable including crimping of lugs of size 1×70,120,150 Sqmm

Laying and erection of LT PVC Cable including crimping of lugs of size 1×240,400,600 Sqmm

Erection, providing and fixing of 50×35 mm wire mesh of size 2(2+4) Mtr. around plinth and toe wall duly welded with frame of M.S angle iron 35×35×6 mm and strip of size 35×6 mm in mid of each side along with wire mesh (width of wire mesh 1.5 Mtr.) with the height of 1.5 Mtr. above the plinth and 2 Mtr. above the toe wall with 1 Nos. gate and locking arrangement in the toe wall size including grouting of 6 Nos. legs in the ratio in block of size 0.25×0.25×0.45 Mtr. and complete painting of wire mesh with aluminum paint with two coat (including the cost of cement and all material)

Mounting and fixing of TPMO and fuse sets on double Pole Structures including making of connections for smooth running and operation.

Mounting and fixing of Lightning arrestor set (3 Nos.) on double Pole Structure including making all connections by G.I.Strip size 35×6 mm to earth point (including cost of G.I.Strip)

Painting of Poles with angle and channel and all steel part by one coat of Red Oxide Primer and two coats of Aluminum Paint and two strip of fluorescent alternate Red and White paint 30 Cm wide upto 1.5 Mtrs. from ground level

ST Pole SP-33

ST Pole SP-55

ST Pole SP-72

Opening and Reconnection of existing service connections by Loop jumpering on main line through catenary wire 12 SWG and eye rag bolt at consumers premises including supply of catenary wire and eye rag bolt in size 150×12 mm

Jointing and Fixing of Cable Jointing Kits Indoor/Outdoor Cable Boxes

11 KV XLPE Heat Shrinkable

33 KV XLPE Heat Shrinkable

Straight Through 11 KV XLPE

Straight Through 33 KV XLPE

Fixing and Installation of LT Fuse Set

Dismantling of TPMO/Fuse Set on Double Pole Structure

Dismentaling of Existing LT/HT Line including Disc Fitting, Insulators, Clamps, Nut & Bolts & Consumer Connection & Street Light Connection etc. including Rolling of Conductor & Cartage back from Site to JE Store

Single Pole

Rail 90 Lbs/105 Lbs

PCC Pole

Double Pole

Rail 90 Lbs/105 Lbs

PCC Pole

Four Pole

Rail 90 Lbs/105 Lbs

11 KV Line with Earth Wire

ACSR Weasel

ACSR Rabbit

ACSR Racoon

ACSR Dog

ACSR Weasel Conductor

3 phase 5 wire length

3 phase 4 wire length

2 phase 3 wire length

1 phase 2 wire length

ACSR Rabbit Conductor

3 phase 5 wire length

3 phase 4 wire length

2 phase 3 wire length

1 phase 2 wire length

ACSR Dog Conductor

3 phase 5 wire length

3 phase 4 wire length

2 phase 3 wire length

1 phase 2 wire length

Dismentaling of T/F from Double Pole/Plinth including Opening of all Connection, Circuits & Earthing Strip etc.

11 KV CT-PT Combined Uint off sizes

33 KV CT-PT Combined Uint off sizes

Stay Rod Complete

11 KV VCB/33 KV Single Feeder/Double Feeder/Transformer Single or Double/Capacitor Panel

Installation/mounting of new Transformer on plinth/double Pole Structure and fixing of channel/angle etc. and making all connections of HT and LT side and its complete commissioning

On Double Pole

400 KVA/500 KVA

On Plinth

400 KVA/500 KVA

Route clearance by cutting of Tree branches/proning, loping and chopping of trees for L.T., 11 & 33 KV line

T-off Connection Complete 11 KV

T-off Connection Complete 33 KV

Fixing of Danger Board, Number Plate complete by providing Clamps of M.S. Flat 50×6 mm and Nuts & Bolts, Danger Boards of M.S. Sheet 2 mm Thick 11"×7" size (Including cost of all material)

Installation of 11 KV VCB (O/G or B/C or I/C) Panel in all respect, making of all connection, testing etc. in all respect at Erection Site

Erection of 33 KV Control Panel (Feeder/Transformer) in all respect, making connection including Testing and Commissioning

Erection of 33 KV Vaccum Circuit Breaker in all respect, making connection including Testing and Commissioning

Painting of Isolator/LA/CT/Structure Complete

Painting of T.G. with One Coat of Red Oxide Paint & 2 Coats of Aluminum Paints of best quality I.S.I. Mark

Laying of LT Cable from Pole to Consumer end Meter

Digging of trench of size 0.60x0.10 mtr. and laying of underground LT cable with making of brick housing and filling of sand including filling of earth with ramming & repairing of road including cost of cement, sand & stone blast

Digging of trench of size 0.60x0.10 mtr. and laying of underground 11 KV XLPE cable with making of brick housing and filling of sand including filling of earth with ramming & repairing of road including cost of cement, sand & stone blast

Digging of trench of size 0.60x0.10 mtr. and laying of underground 33 KV XLPE cable with making of brick housing and filling of sand including filling of earth with ramming & repairing of road including cost of cement, sand & stone blast

Realignment of existing PCC double Pole as per size of TPMO with digging of pit and fixing of TPMO on double Pole with smooth operation including making of gung and jumper with binding complete

Fixing of 11 KV Termination Kit

Fixing of 33 KV Termination Kit

Cutting of haevy tree branches/proning/looping/chooping for LT/11 KV/33 KV Line

Laying and Fixing of 11 KV Cable on Pole

Laying and Fixing of 33 KV Cable on Pole

Fabrication and Fixing of Fuse Set on the Double Pole

Making of Section Pole for existing LT/HT/33 KV Line

Installation of 33/11 KV Metering Cubical in the Metering Room with Grouting in CC 1:4:8

Making of 33/11 KV Connection at both side in metering cubical including taping

Fixing of RCC Cable Route Marker

Laying of LT Cable in half circle hume pipe of dia 150 mm Including cost of hume pipe in depth 0.9 Mtr.

Laying of 11 kV cable in half circle hume pipe of dia 150 mm Including cost of hume pipe in depth 1.5 Mtr.

Laying of 33 kV cable in half circle hume pipe of dia 150 mm Including cost of hume pipe in depth 1.5 Mtr.

Fabrication & erection bus Isolator /Line/LA/CT/PT/Fuse set

Fabrication Charges

Excavation of earth for erection of structure (2x1.1x0.3x0.3) mtr.

Grouting of structure in CC 1:3:6 in size (2x1.1x0.3x0.3) mtr.

Erection charges of strucutre

Installation of 33 kV CT with all Connection

Laying, Sagging & Stringing of LT AB Cable of Size 3x120/95 Sqmm

Laying, Sagging & Stringing of LT AB Cable of Size 3x70 Sqmm

Laying, Sagging & Stringing of LT AB Cable of Size 3x25/35 Sqmm

Laying, Sagging & Stringing of LT AB Cable of Size 1x25/35 Sqmm

Dismatling of burnt/damged LT AB Cable of size 3x120 Sqmm of 3 Phase 4 Wire bare conductor line from pole support, rolling back, proper stacking

Dismatling of burnt/damged LT AB Cable of size 3x95 Sqmm of 3 Phase 4 Wire bare conductor line from pole support, rolling back, proper stacking

Dismatling of burnt/damged LT AB Cable of size 3x70 Sqmm of 3 Phase 4 Wire bare conductor line from pole support, rolling back, proper stacking

Dismatling of burnt/damged LT AB Cable of size 3x25/1x25 Sqmm of 3 Phase 4 Wire bare conductor line from pole support, rolling back, proper stacking

Chemical Earthing : Earthing of transformer including digging of pit of size 2.5 mtr. Depth and make hole of size 150 mm, placing of earthing electrode (to be supplied by contractor), connecting the same with G.I. strip (to be supplied by contractor) of size 35x6 mm for minimum length 6 m., treatment of soil with highly conductive substance as per IS 30343, result of earthing resistence to be recorded before and after installtion of earthing. The earth resistance should be less than 1 Ohm.

Laying of HDPE Pipe (outer dia 160 mm) with coupler, short and long bends in open cut trenchless (0.6m width x 1.5-2.0m depth) for installation of power cable

Laying of HDPE Pipe (outer dia 160 mm) with coupler, short and long bends at 1.2 to 1.5 mtr. deep using horizontal directional (HDD) method including excavation of HDD drills pits & back filling, removal of excess earth from site including earth compression for insatllation of power cable

Laying & Installing of 33/11 KV XLPE HT Cable 3Cx300 sqmm in HDPE Pipe

Laying, Sagging and Binding of AB Cable HT line

Resagging of old LT line conductor 1 Phase 2 Wire/2 Phase 3 Wire/3 Phase 4 Wire complete with binding & jumpering

Resagging of old 11 kV line with ACSR Rabbit/Dog Conductor for maintaning ground clearnce to avoid accident

Resagging of old LT AB Cable with binding & jumpering

Breaking of CC road

Reparing of CC road by using CC ratio 1:4:8 including cost of ballast, cement & sand, back filling of soil and boulders in pit

Loading/Unloading & carriage of LT PRMC from store to pit site & installation on the double Pole with the help of nut bolt & Clamp and making of passing LT cable from T/f to PRMC

Construction of metering room for metering cubical at S/s end

Fixing of G.I. Pipe

Fixing of Holding Clamp for ST/SP - 72 Pole

Fixing of Holding Clamp for ST/SP - 55 Pole

Fixing of Holding Clamp for PCC Pole

Fixing of Holding Clamp for ST/SP - 33 Pole

Fixing of Holding Clamp for ST/SP - 55 Pole for J/I hook

Fixing of Holding Clamp for PCC Pole for J/I hook

Fixing of Holding Clamp for ST/SP - 33 Pole for J/I hook

Fixing of Stay Clamp for ST/SP 72 Pole

Fixing of Stay Clamp for ST/SP 55 Pole

Fixing of Stay Clamp for PCC Pole

Fixing of Stay Clamp for ST/SP 33 Pole

Fixing of "F" Clamp for PCC Pole

Fixing of Earth Wire Clamp for PCC Pole/ST Pole

Fixing of Dropper Clamp for PCC Pole

Fixing of LT insulator 75X90 mm

Fixing of LT Clamp for PCC Pole/ST Pole

Fixing of LT Clamp for ST/SP 33 Pole

Fixing of LT Clamp for ST/SP 55 Pole

Fixing of Aluminum Lug of size 95 sq.mm for All HT & LT Side of T/F

Fixing of Aluminum Lugs of size 70 Sq.mm for HT & LT Side of T/F

Fixing of Aluminum lugs of size 150 Sq.mm for HT & LT Side of T/F

Fixing of Aluminum lugs of size 240 Sq.mm for HT & LT Side of T/F

Fixing of Piercing connector Suitable for 120-120 MM

Fixing of Piercing connector Suitable for 95-95 MM

Fixing of Piercing connector Suitable for 120-95 MM

Fixing of Piercing connector Suitable for 95-70 MM

Fixing of Piercing connector Suitable for 25-25 MM

Fixing of J-Hook with Clamp suitable for AB Cable

Fixing of Dead end Clamp suitable for AB Cable

Fixing of Suspension Clamp suitable for AB Cable

Fixing of PG Clamp Aluminium allow dog to dog with N&B

Fixing of PG Clamp panther to dog with N&B

Fixing of Earth Wire Clamp for SP 72 with Nut & Bolts

Fixing of Bracing Clamp for SP 72 (Top) with Nut & Bolts

Fixing of Bracing Clamp for SP 72 (Bottom) with Nut & Bolts

Fixing of 33 KV VCB Clamp for Panther

Fixing of 33 KV LA Clamp for Panther

Fixing of Single Phase Distribution Box

Fixing of Three Phase Distribution Box

Fixing of LT XLPE Cable 1x50 Sqmm

Total (B)

Sub-Total (A+B)

Note :- GST will be paid extra as actuals & All work done and materials supplied by contractor should be as per RESSPO Construction Manual/Specification.

However total amount of this tender shall be Rs. 75.00 Lakhs. Since above work of release of LT & HT Connections depends on the application received in division. So actual figures what kind of work & in how much quantity is required can't be ascertain, So unit rates of each & every possible work is taken in this tender.