CONSTRUCTION WORK OF PEB AUCTION SHED AND INTERNAL PAVED ROAD

NAME OF WORK:- CONSTRUCTION WORK OF PEB AUCTION SHED & INTERNAL PAVED ROAD

Location : APMC Campus, S.No. 15 and 17, Visavadar A.P.M.C., Visavadar - Junagadh Road, Village :

Mandavad, Taluka : Visavadar, Dist : Junagadh

Name of Work Estimated Cost

B1 CONSTRUCTION WORK OF PEB AUCTION SHED

B2 CONSTRUCTION WORK OF INTERNAL PAVED ROAD, AT. IN BETWEEN

SHED No. A&D AND VEGETABLE AUCTION SHED

B3 CONSTRUCTION WORK OF INTERNAL PAVED ROAD, AT. IN BETWEEN

SHED No. B&C AND OFFICE BUILDING & HANUMAN TEMPLE

Total Amount Rs..

Total Amount Rs..

GST, GST will be paid extra by APMC-Visavadar

I/We am/are willing to carry out the work @ ________% Above / Below_____________ Percentage (should

be writen in figures and words) of the Estimated rates mentioned above amount of my / our Tender works

Estimated Amount Estimated Amount

Put to Tender Rs. 2,96,31,377-00 Put to Tender Rs. 2,96,31,377-00

Add % Rs. Deduct % Rs.

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor Consultant

Vanraj K. Patel

NEHA CONSULTANCY (PMC)

Secretary Chairman

APMC Visavadar APMC Visavadar

THE AGRICULTURAL PRODUCE MARKET COMMITTEE - VISAVADAR

DIST. : JUNAGADH

SCHEME :- VARAH: KISHAN KALPVRUKSH YOJNA & SELF FUND

NAME OF WORK : CONSTRUCTION WORK OF PEB AUCTION SHED

Location : S.No. 15 and 17, Visavadar A.P.M.C., Visavadar - Junagadh Road, Village : Mandavad, Taluka :

Visavadar, Dist : Junagadh

I. No. Item Description Qty. Rate Per Amount

1 Demolition including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and lift.

(i) R.C.C. work

2 Demolition of Brick work and stone masonry including

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. (i) In Lime

3 Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

off the excavated stuff upto all lead. (A) Loose or soft soil

4 Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto all lead. (B) Dense

5 Excavation for foundation for depth from 1.5 m to

m including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

all lead. (C) Hard Murrum

6 Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto all lead. (D) Soft

rock not requiring Blasting

7 Providing and laying cement concrete 1:3:6 (1 cement :

coarse sand : 6 Machine cut stone aggregate 20mm

nominal size) and curring complete including cost of

formwork in (a) Foundation and plinth

8 Provinding and laying controlled cement concrete M-250

and curing complete including the cost of formwork and

reinforcement for reinforced concrete work in (A)

Foundations, footings, Base of Columns and Mass

I. No. Item Description Qty. Rate Per Amount

9 Providing and laying controlled cement concrete M.250

exposed work with curing etc. complete including the cost

of formwork but excluding the cost of reinforcement for

R.C.C. work in Column (iii) Having cross-sectional area

more than 0.12 Sq.M

10 Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundation etc. in layers not

exceeding 20cm. In depth consolidating each disposited

layer by ramming and watering.

11 Providing and laying in position Ready Mixed M-200 grade

concrete for reinforced cement conctere work, using

cement content as per approved Design Mix

manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up

to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of

R.M.C. from transit mixer to site of laying, including the

cost of centering shuttering finishing and reinforcement

including cost of admixtures in recommended proportions

as per IS:9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and

durability as per direction of the Engineer - in - charge.

Without Fly Ash (Min cement level as per latest IS

shall be maintained)

12 White Stone Bela mesonry block in course in

superstructure with stone of approved quality in Cement

Mortar 1:5 (1-Cement :5- course sand) including packing

the joints etc. complete.

13 Providing TMT Bar FE 500D reinforcement for R.C.C. work

including bending, binding and placing in position

complete upto floor two level.

14 Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finishing with a

floating coat of neat cement slurry. in (i) Cement mortar

1:3 (1-cement:3-sand)

15 Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand papered smooth.

I. No. Item Description Qty. Rate Per Amount

16 Finishing wall with weather proof exterior emulsion paint

on wall surface (two coats) to give an required shape

even shade after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered

materials.etc complete

17 Design, Manufacture, Supply and instalation of Pre-

Engineered Building Auction Shed as per design criteria

given in the bid documents. All designs and drawings have

to be submitted for approval from APMC before starting

the work. The work has to be started only after getting

approval from APMC. The work includes all types of

surveys, design, materials, labour, transportation, loading,

unloading, installation charges, Anchor bolt, Finishing

with grouting column base after complete the all erection

work etc. It will be carried out as directed by the

representative or Engineer-in-charge.

18 Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K

to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (B) Flood Light (IP-

65), Surge protection -4KV integral and, Light must have

440VAC line supply with overvoltage protection. (iv)

above 90 to 120 watts Cat-lll (as per directed by APMC)

19 Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories. [II] For 16A

Plug and 16 amp switch with 2-2.5sq.mm Cu. Wire from

mcb db board. (a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete Cat-

I. No. Item Description Qty. Rate Per Amount

20 Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (A) With medium class Rigid

PVC pipe and accessories.

21 Providing and erecting Miniature circuit breaker single

pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark Cat-

22 Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity (A) 6 to 32 Amp. Cat-lll

23 Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following

capacity. Cat-lll (b) 63 Amp.

24 Providing & erecting approved make thermo plastic

MCB/RCCB distribution board having modular Double

door with DIN rails, epoxy powder coated finish metal

frame & door assembly with Acrylic/ Plastic door, spring

& hinged pins complete with required PVC sleeved 32 /

63A copper Bus strips without MCB / RCCBs (f) Two Row

Total Amount Rs..

Total Amount Rs..

GST. GST will be paid extra by A.P.M.C. - Visavadar

Stamp with Signature of Contractor

Cons. Engineer Secretary Chairman

Vanraj K. Patel APMC Visavadar APMC Visavadar

Neha Consultancy (PMC) Visavadar Visavadar

THE AGRICULTURAL PRODUCE MARKET COMMITTEE - VISAVADAR

DIST. : JUNAGADH

SCHEME :- VARAH: KISHAN KALPVRUKSH YOJNA & SELF FUND

NAME OF WORK :- CONSTRUCTION WORK OF INTERNAL PAVED ROAD, AT. IN BETWEEN SHED No. A&D

AND VEGETABLE AUCTION SHED

Location : S.No. 15 and 17, Visavadar A.P.M.C., Visavadar - Junagadh Road, Village : Mandavad, Taluka :

Visavadar, Dist : Junagadh

I. No. Item Description Qty. Rate Per Amount

1 Box cutting the road surface to proper slope and camber

for making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50Mt. lead.

2 Add extra over item 1 for conveying and utilising the stuff

in bank from end of cutting with all required lead and lift.

3 Providing and laying of wet mix base course macadam of

150mm each leyar using machine crushed chips as per

required gradation mixing with required optimum

quantity of water conveting the mix to site and spreading

in to grade and camber with machinery paver,

consolidation with vibratory road rolling includig

materials In Two Layes

4 Rolling and consolidation of soiling including filling in

depression which occur during the process, with power

roler 8 tonne to 12 tonne.

5 Providing and laying cement concrete 1:3:6 (1 cement :

coarse sand : 6 Machine cut stone aggregate 40mm

nominal size) and curring complete including cost of

formwork in (a) Foundation and plinth

I. No. Item Description Qty. Rate Per Amount

6 Providing and laying in position Ready Mixed M-200

grade concrete for reinforced cement conctere work,

using cement content as per approved Design Mix

manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up

to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of

R.M.C. from transit mixer to site of laying, including the

cost of centering shuttering finishing and reinforcement

including cost of admixtures in recommended proportions

as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and

durability as per direction of the Engineer - in - charge.

Without Fly Ash (Min cement level as per latest IS

shall be maintained) (Cement level 400 kg)

7 Providing and using of quartz base non metallic, dry shake

natural aggregate Concrete Surface Hardner of approved

made and manufacture @ 2 kg/ Sq.mt.

8 Providing and using Polyester Fiber (12mm) with

triangular or equivalent cross section with specific gravity

1.35 to 1.40 (as a secondary reinforcement) in concrete of

any grade at the rate of 125 gms. (1-Packet of 125 gms.)

per 50 kg. of cement consumption.

390.00 60.60 Packet

9 Providing TMT Bar FE 500/ 500D Reinforcement for RCC

work and bending, binding & placing in position complete

up to floor two level.

Total Amount Rs..

Total Amount Rs..

Stamp with Signature of Contractor

Cons. Engineer Secretary Chairman

Vanraj K. Patel APMC Visavadar APMC Visavadar

Neha Consultancy (PMC) Visavadar Visavadar

THE AGRICULTURAL PRODUCE MARKET COMMITTEE - VISAVADAR

DIST. : JUNAGADH

SCHEME :- VARAH: KISHAN KALPVRUKSH YOJNA & SELF FUND

NAME OF WORK : CONSTRUCTION WORK OF INTERNAL PAVED ROAD, AT. IN BETWEEN SHED No. B&C AND

OFFICE BUILDING & HANUMAN TEMPLE

Location : S.No. 15 and 17, Visavadar A.P.M.C., Visavadar - Junagadh Road, Village : Mandavad, Taluka :

Visavadar, Dist : Junagadh

I. No. Item Description Qty. Rate Per Amount

1 Box cutting the road surface to proper slope and camber

for making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50Mt. lead.

2 Add extra over item 1 for conveying and utilising the stuff

in bank from end of cutting with all required lead and lift.

3 Providing and laying of wet mix base course macadam of

150mm each leyar using machine crushed chips as per

required gradation mixing with required optimum

quantity of water conveting the mix to site and spreading

in to grade and camber with machinery paver,

consolidation with vibratory road rolling includig

materials In Two Layes

4 Rolling and consolidation of soiling including filling in

depression which occur during the process, with power

roler 8 tonne to 12 tonne.

5 Providing and laying cement concrete 1:3:6 (1 cement :

coarse sand : 6 Machine cut stone aggregate 40mm

nominal size) and curring complete including cost of

formwork in (a) Foundation and plinth

I. No. Item Description Qty. Rate Per Amount

6 Providing and laying in position Ready Mixed M-200

grade concrete for reinforced cement conctere work,

using cement content as per approved Design Mix

manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up

to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of

R.M.C. from transit mixer to site of laying, including the

cost of centering shuttering finishing and reinforcement

including cost of admixtures in recommended proportions

as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and

durability as per direction of the Engineer - in - charge.

Without Fly Ash (Min cement level as per latest IS

shall be maintained) (Cement level 400 kg)

7 Providing and using of quartz base non metallic, dry shake

natural aggregate Concrete Surface Hardner of approved

made and manufacture @ 2 kg/ Sq.mt.

8 Providing and using Polyester Fiber (12mm) with

triangular or equivalent cross section with specific gravity

1.35 to 1.40 (as a secondary reinforcement) in concrete of

any grade at the rate of 125 gms. (1-Packet of 125 gms.)

per 50 kg. of cement consumption.

500.00 60.60 Packet

9 Providing TMT Bar FE 500/ 500D Reinforcement for RCC

work and bending, binding & placing in position complete

up to floor two level.

Total Amount Rs..

Total Amount Rs..

GST. GST will be paid extra by A.P.M.C. - Visavadar

Stamp with Signature of Contractor

Cons. Engineer Secretary Chairman

Vanraj K. Patel APMC Visavadar APMC Visavadar

Neha Consultancy (PMC) Visavadar Visavadar