Loading…
Loading…
Tender Value
₹3.2 Cr
EMD Value
₹3.1 L
Closing Date
22 Dec 2025, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DRM/WORKS
14 conditions · 2 needing a document upload
10.2 - Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, as provided at Page 41 of tender documents, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
10.1 Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Non-submission of the Completion certificate issued by the Competent Authority shall result into summarily rejection of the offer.
Defination of Similar Work :- 2.6 - Fabrication and erection of steel structure or launching/de-launching of any steel girder/industrial shed/micro wave towers/transmission line towers/platform shed/steel staging work/steel chimney works etc.
24 conditions · 2 needing a document upload
"The said suppliers of goods and/or services would be subject to GST Act and Rules as applicable from time to time. Tenderers are requested to submit their offers as per GST Tax regime. All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law"
Successful tenderers are required to submit the number of labour to be employed for this particular work. Also the list showing names, along with all other details, of male and female workers employed in this work, should be submitted to office, at the time of submitting performance guarantee and before executing contract agreement. They should also ensure that 1) The payment to the contract labour should be made through bank/cheque. 2) Identity Cards should be issued to all contract workers. 3) Necessary steps should be taken to deduct provident fund from the payment made to contract labour and ensure that the same is credited to their Provident Fund account. 4)Medical facilities from ESI should be ensured, if applicable.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderers are required to submit a copy of cancelled cheque in order to facilitate the payments regarding refund of EMD etc. in their proper accounts.
In addition to latest provisions of GCC, and all contents of tender documents, all other latest instructions of Railway Boards issued vide various letters received from time to time on concerned matters and related to tender, will also be applicable for the tenders as per necessity and tenderers have to co-operate with Railways and ensure the compliance
Indian Railways Standard General Conditions of Contract, April 2022 (GCC, April 2022) has been introduced and available on website with all correction slips issued up to date for inviting tender and same will be applicable for this tender. Advance Correction Slip No. 1, 2, 3, 4, 5, 6, 7, 8, 9 and 10 to Indian Railways Standard General Conditions of Contract, April - 2022 circulated by the Railway Board vide letter No. 2022/CE-I/ CT/GCC-2022/Policy dated 14.07.2022, 13.12.2022, 26.04.2023, 07.08.2023, 20.10.2023 , 21.12.2023, 25.09.2024, 20.12.2024, 09.01.2025 and 04.03.2025 are applicable to this tender. Tenderers are requested to download the same from the railways website and ensure the implementation of the latest provisions made in GCC while execution of work. After that, if any latest correction slip issued by Railway Board on any matter, will also be applicable with immediate effect, though not mentioned in original tender document.
I/We agree to carry out all works with use of modern equipments of required capacity for the work without extra payment. The decision of railway engineer shall be final and binding in this regard.
It is the responsibility of contractor to arrange the payment of the labour employed for the work through bank and to deduct PF as per the provisions of Minimum Wages Act.
The quantities shown above are approximate and to give a general guideline. Railway reserves a right to increase, decrease or to delete any of the items mentioned in schedule.
As per ACS 1 to GCC April 2022, issued vide Railway Board's letter dt. 14.07.2022, PVC Clause shall be applicable only in tenders having advertised value above Rs. 2 Crores provided to the provisions as per clause 46A-1. Tenderers should take a note and quote their rates accordingly.
In case Civil work tenders, the quantity of cement required in the items where necessary, will be used by the contractor on the same rates as accepted in tender, as per the quantity mentioned against each item in USSOR/DSR, though not mentioned in tender schedule.
Tenderers are advised to quote their rates including all type of taxes and levies etc. to be paid by them. Any extra payment will not be made on account of taxes/Levies etc., in excess of Contract Agreement Value,
In case of submission of Bid Security in the form of Bank Guarantee, a scanned copy of Original BG valid for a period of 90 days beyond the validity period of tender, and addressed in favour of Sr. DFM/WCR/BPL, shall be uploaded on IREPS portal while applying for tender. And As per ACS 2 to GCC April 2022, circulated vide Railway Board letter dt. 13.12.22, original BG should be delivered in person to the Concerned Official in Office before closing date for submission of bid (i.e. Excluding the last date of submission of bid) without fail. Any failure in this connection shall lead to summary rejection of bid.
Maintenance period will be12 months after successful completion of work.
Bhopal Division: Construction of foot over bridge at Km 976/10-12 potential trespassing location in Bina-Katni section.
WCR-BPL-W-25-26-N-22-117~WCR
WCR-BPL-W-25-26-N-22-117
Open
Works - General
12 Months
Bhopal, Madhya Pradesh
₹0
₹3.1 L
22 Dec 2025
27 Nov 2025
8 Dec 2025
42 items across 4 schedules · ₹3,72,21,607.67 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| drilling of boreholes down to depth, drilling of 150mm dia. in all type of soils except hard large boulders (boulder core more including refilling, reinstating disposing off surplus material use of mechanical rigs with power winches as well as tool for advancing occasional seams of hard strata to where necessary in Dry area. | — | — | — | — | |
| 1 | 0m to 10m | Metre | 5.00 | 1,271.04 | 6,355.2 |
| in excavation by mechanical (Hydraulic Excavator)/Manual Means and floors of the bridges, walls etc. including setting out, of sides, ramming of bottom, the excavated material, back layers with approved material and of the layers by ramming and etc. including all lift, disposal of up to a lead of 300m, all types and strutting with all labour and complete as per drawing and specification as directed by in charge. Note: This item will be excavation work in connection with miscellaneous works also like side foundation for OHE masts and other structures in connection with Conversion, Doubling, New lines. | — | — | — | — | |
| 2 | soils | cum | 896.00 | 212.37 | 1,90,283.52 |
| and laying in position Plain concrete of specified Nominal Mix miscellaneous works like side drains, for OHE masts and other structures excluding the cost centering and shuttering - All plinth level : | — | — | — | — | |
| 3 | Cement : 2 coarse sand (zone-III) : stone aggregate 40 mm nominal | cum | 31.00 | 3,497.39 | 1,08,419.09 |
| 4 | and laying in position machine machine mixed and machine Cement Concrete of specified per approved Design Mix (mixed Concrete Batching/Mixing Plant at RMC from approved plants) using graded crushed stone aggregate and of approved quality in RCC raft & Pile cap including finishing, Plasticiser in approved proportions IS:9103), to modify workability impairing strength and durability as per specifications and direction Engineer in charge. Note: 1. Payment reinforcement and shuttering made extra under relevant item. 2. shall invariably be used in proportion to increase workability possible quantity of cement of Design Mix Concrete unless approved citing reasons for plasticiser at the stage of Mix in that case deduction shall be per relevant item. | cum | 230.00 | 3,480.72 | 8,00,565.6 |
| and shuttering including propping etc. and removal of form | — | — | — | — | |
| 5 | of bridge sub-structures, e.g. pier, wing wall, retaining wall, RCC foundations, Abutment cap, Pier Inspection Platform & Pedestal over Fender wall, Diaphragm wall etc. above ground level | Sqm | 465.00 | 749.27 | 3,48,410.55 |
| using Cement at Worksite | — | — | — | — | |
| 6 | Portland Cement 43 grade brands/makes | MT | 103.00 | 8,178.81 | 8,42,417.43 |
| steel reinforcement of approved for R.C.C. work including cutting, bending, placing in binding all complete. | — | — | — | — | |
| 7 | Thermo-Mechanically Treated bars of grade or more of approved | Kg | 23000.00 | 118.78 | 27,31,940 |
| fabrication, assembling of all steel girders of specified spans steel conforming to Quality Designation E250 conforming to erection / slewing / end launching girders with cranes or any other launching methods as per site (not requiring traffic block) on including provision of trolley complete as per approved QAP conforming to IRS-B1-2001 relevant codes and specifications. Detailed fabrication and erection & launching methodology will be by the contractor and got from Railway. 2. The rate is all including launching in position, in all respect except cost of (i) Metalising; (ii) Bearings & (iii) which shall be paid extra under item. 3. The payment shall be the theoretical weight of main and gusset plates only. 4. Schedule: (i) Receipt of material at (ii) Fabrication of girders: 20% (iii) 20% (iv) Completion in 20% | — | — | — | — | |
| 8 | Girder/Semi Through Girder (Steel Work) | MT | 44.00 | 1,49,423.65 | 65,74,640.6 |
| 9 | and fixing HSFG bolts of any dia length with suitable nuts including conforming to IRS-B1-2001 for and s t e e l structures with labour, tools and plants and lift etc., complete. | Kg | 1800.00 | 187.18 | 3,36,924 |
| of steel work of girders with aluminium after surface by Sand/grit blasting, followed of etch primer (IS:5666) & one Zinc Chrome primer (IS:104) and of aluminium paint (IS:2339) with T&P and material as a complete conforming to all relevant and process given under of IRS-B1-2001. Note: Nominal of sprayed Aluminium coating 150 microns. DFT of Zinc chrome be 25-30 microns and DFT of of Aluminium paint shall be 12-14 | — | — | — | — | |
| 10 | girder during fabrication | Sqm | 2174.00 | 839.39 | 18,24,833.86 |
| in position, by any approved pre-fabricated Steel Girders, girders/slabs, casted at casting at site, to correct alignment over the bed block / pedestal with arrangements, complete in all | — | — | — | — | |
| 11 | steel plate girders | MT | 44.00 | 1,272.35 | 55,983.4 |
| 12 | fabricating and erecting welded bolted and/or riveted steel work in sections, trusses and framed work, racks, Height Gauge etc. for Steel other than bridge girders, using angles and channels/flats, plates, round or square bars, cleats, bolts contractors own steel including bending, straightening, drilling, hoisting, fixing, erecting, welding, etc., with Providing stiffeners required as per approved drawing applying a priming coat of a steel primer with all contractor's labour, tools & plants, lead & lift crossing of tracks if required etc., as per specification and as by Engineer-in-charge. Note: The shall be made on the theoretical main components and gusset | MT | 31.00 | 1,28,651.97 | 39,88,211.07 |
| 13 | laying of quarry dust including supply of all materials, lead, lift, tools, plants, crossing of per drawing and technical as directed by the Engineer in case loose slush is encountered foundation before casting the or laying the filtering media. | cum | 200.00 | 1,033.01 | 2,06,602 |
| of machinery for minor works for short duration operator/driver, fuel, lubricants consumable. The contractor shall statutory permits as required by regulations prevailing in the area Payment shall be made for actual hours at site. | — | — | — | — | |
| 14 | Loaders 3DX Plus or similar 1.10 cum bucket capacity | Hour | 200.00 | 830.66 | 1,66,132 |
| Schedule total | ₹1,81,81,718.32 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .