REPAIRS TO WALLS, FLOORING, ROOFING, JOINARY, PLUMBING, SUNKEN/ ROOF TREATMENT, FACIA AND EXTERNAL/INTERNAL WALL FINISHES UNDER GE (E) BAREILLY

Amount

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed .

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing complete all as specified and directed .

Demolition of cement (un-reinforced) concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engineer-in-Charge.

Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed.

Dismantling of 100mm bore cast iron /PVC drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.

Dismantling of 75mm bore cast iron /PVC drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed .

Taking up or down15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

Taking up or down20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

Dismantling structural steel work including doors , gates but excluding framed truss etc.

Dismantling water tank exc 250 ltr but n exc 500 ltrs complete all as specified and directed.

Dismantling water tank exc 500 ltr but n exc 1000 ltrscomplete all as specified and directed.

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings.

Dismentling of wall and ceiling boards/ fibre, pulp, insulation etc or insulation boards/ slabs/blankets any thickness incl cover fillets.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing complete FE 290 Gde E-165

S & F 1.25 mm thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles, prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed . (Note :- S & F Glass/gauge shall be measured and paid for separately)

S&F 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F mild steel framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete all as specified and directed.

S&F Steel windows with pressed steel frame (dimension- 95X45X1.25 mm ),side hung shutters including box type hinges with steel handle, and steel peg stay, complete with Glazed openable shutterg with glazing bars( out side shutters) and wire gauged openable shutter without glazzing bars ( inside shutters ),dovetailed or welded complete all as specified and directed all as per Drg NO- TD/088 dt 07 Jan 2002.

S&F for steel ventilators fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Glass shall be measured and paid for separately).

S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed .

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed

S & F 300 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed

S&F 150mm size Extruded brass handles, fabricated type polished completed all as specified and directed.

S&F 100 mm long butt hinges medium weight colled rolled mild steel complete all as specified and directed.

S&F in repair 300mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame.fixed in repair complete all as specified and directed.

S&F in repair 375mm, ordinary rat tail rod patttern springs includding roller and roller platewith fixed to stone/pressed steel frame chowkats with flat iron 40x3mm size 75 cm long with necessary bolts, etc. complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed complete all as specified and directed.

S&F fixed in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanized wire staples in wire mess door and M S steel window complete all as spd and directed

Hacking out old, broken glass (any thickness,) size quality or description) from metal frames incl.punching or drilling out old glazing pins/spring clips and fixing new ones incl M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated shets in roofs, walls, etc. fixed with L or J type hook bolts complete all specified and as directed.

S&F asbestos cement onepiece plain angular ridge 6mm thick Fixed with L-type or J-type or cranked hook bolts complete all specified and as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified

S&F MS Steel work in tubuler trusses including special washer etc complete all as specified and directed

M&L for E-board false ceiling consisting of powder coated GI wall angle, main T and cross T of 25mmX 25 mm X 1.40 mm thick grid frame work, joist, angle/ Tee as directed and mild steel wire hook not less than 6 mm dia with arrangement for adjusting height of ceiling and including provn of 4 mm thick E- Classic board in pannelof size 600X600mm with necessary off cut including dismantling of existing false ceiling and taking down and refixing of Electric fitting carefully complete all as specified and directed.

M&L for M&F prelaminated gypboard partition wall lining which included 12.5mm thick gypboard (confirming to IS:2095-1982)screw fixed to the ceiling section (0.55mm thick having aknurled web of 51.50mm and two equal flanges of 26mm each with lips of 10.5 mm made of G .I. steel) placed at 610mm centres in perimeter channel (0.55mm thick having one flange of 20 mm and another flange of 30 mm and web of 27 mm made of G.I.steel) fixed to the floor and ceiling with nylon sleeves &wood screws at 610mm c/c. Finally the boards are to be jointed &finished so as to have aflush look which included filling &finishing with jointing compound . joint paper tape and two coats of Drywall top coat suitable for gypboard (as per recommended practices of India gypsum.and taking down and refixing of Electric fitting carefully complete all as specified and directed.

M&L for PVC SHEET WALL PANELLING of thickness 5mm consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement.

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed :- (a) Frame 100x44x1.48mm thick with rawl plug (b) Middle and lock rail : 150x44x1.48mm thick (c) Bottom rail : 150x44x1.48mm thick (d) Top rail/style : 85x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty ( Make Sandhu ISI marked or its equivalent approved make) (g) Making good of wall surface to match with existing surface complete.

S&F sliding windows of aluminium alloy powder coated, window and frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter ) on tracks ( three tracks with mosquito proofing) and glazzing with and including 5.00 mm thick tinted glass fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame : 95x35mm X 1.48 mm thick for three tracks (ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over.iii) Aluminium beading - 0.7mm thick (IV)Aluminium wire cloth0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (iv) Aluminium fittings such as peg stay, aluminium hinges, aluminium handle 100mm long , aluminium tower bolt 100mm long (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

S&F sliding windows of aluminium alloy powder coated, window and frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter ) on tracks ( Two tracks with mosquito proofing) and glazzing with and including 5.00 mm thick tinted glass fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :63x35mm X 1.48 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over.(iii) Aluminium beading - 0.7mm thick (IV)Aluminium wire cloth0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (iv) Aluminium fittings such as peg stay, aluminium hinges, aluminium handle 100mm long , aluminium tower bolt 100mm long (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

S & F partition wall of powder coated aluminium hollow sections members of size 63.50 mm x38mmx 1.48 mm thick with distance of vertical hollow section 1.2M to 1.8 M and 1.2 mtr height wall having top rails ,bottom rails and middle rail of size 63.50 mm x38mm x 1.48 mm and upto middle rail wall panels shall be covered by 12mm thick prelaminated particle board ,interior grade both sides with decorative choice laminations , fixed into the wall with aluminium clip and bolt, top hight of middle rail shall be 1 meter from floor and portion above middle rail shall beprovided with figured glass 5 MM thick fixed with aluminium stiprs/beadings with rubber gasket, sketch plan of wall as per existing or as provided by the Engineer-in-Charge compelte all as specified and directed

M & L powder coated aluminum window/ doors grills fixing along with frame of following specification, grills with opening 69.4mm X 78.2mm grills thickness shall be of 6.4mm X 5.8mm having weight not less than 2.306 Kg/per sqm shape as ordered with frame channel of 34 X 11mm X1.7mm thick fixed with screw inside of the window all as directed by Engr-in-Charge and all as specified and as directed.

S&F Stainless steel wire gauge / wire cloth of size 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with s s tacks, or s s wire staples

S&F in repair Venetian blind coloured strip 75 mm top 5 mm thick powder coated aluminium rod rod ends at brackets are moulded type etc complete all as directed.

S&F 12 mm thick tougned glass door with powder coated aluminium frame including neccessary locking ,handle etc with double action floor spring in each shutter complete as requirement of site with suitable height and any type of eaching designed on tougned glass , off cuts complete with finishing wall in CM 1:4 , designed approved by Engr-in Charge

S&F 12 mm thick tougned glass partion wall with or without powder coated aluminium frame with any type of eaching designed on tougned glass , off cuts complete as requirement of site with arrangement for suitable height with off cuts all as spd as directed

M & L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S& F in repair door closer hydraulically regulated Aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed

S&F for fancy type floor door stopper of brass body and tongue with hard drawn steel spring, with hard drawn steel spring. Fixed in door

S&F in repair 20 mm dia fancy Chromium plated curtain rod with necessary bracket including all neccessaly fittings fitted complete all as specified and directed.

M/L for repairing to existing aluminium doors of any size by straightening of frame / shutter, replacing the detoriated member with new, replacing the broken / non funcional hinges with new, replacing decayed rubber gasket with new, replacing the broken glass pane of any size with new 5.00mm thick tinted glass, replacing unserviceable handle, tower bolt, lock, floor spring, foundation box with governing pivot, top pivot, peg stay etc with new and including taking down and at same place after making the door / window smooth functional complete all as specified and directed.

M &L for PCC (1:2:4) type B-0 using 10/12.5 mm graded stone aggregrate laid over roof slab after applying cement slurry for filling undulationations finished even and smooth without using extra cement complete all as spd and directed.

M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm complete all as specified and directed.

M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed. (Note : Water proofing liquid shall be measured and paid separately)

Supply and fix APP polymeric water proofing membrane, minimum 3mm thick and weighing above 3.0 Kg/Sqm of make super thermolay manufactured by STP Ltd or ‘Hyper Plas’ (Polyster) manufactured by M/S IWL Ltd or equivalent as approved by GE, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd} at the rate of 0.40 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions complete all as specified and as directed.Note: (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 30/40 confirming to IS-73, [email protected] Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.40 Kg/Sqm (ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv) In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen (v) Exposed surfaces of APP membrane shall be applied with one coat of bituminous aluminium paint @ 0.20Kg/Sqm. (vi) Above aspects are deemed to be included in quoted rate.

M & L for WPT in sunken floors as described here under:- Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement . (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane , minimum 3 mm thick and weighing above 3.0 kg/ sqm of make super thermolay manufactured by STP ltd or Hyper Plas (Polyster) manufactured by M/S IWL Ltd or 'Shatiplas' )Polyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyster matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or EMW Flate' of M/S Texas India Ltd) at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch , with a over lap of 75mm at the sides and 100mm at the ends sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instructions including preparation of surface by removing the existing treatment, complete all as specified an as directed Note :- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing liquid shall be measured and paid seperately

M & L for providing plain cement concrete, type E-2, 1:3:6 (using 20 mm graded stone aggregate) as in sunken, filling and mass concrete complete all as specified and directed.

supply Integral water proofing Liquid of Dr fixit/sika/Fosroc

S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed.

M & L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed.

M & L 75 mm thick PCC 1:3:6 type C-2, , using 40 mm graded stone aggregate as in floors/ plinth protection, surfaces finished fair and even complete all as specified and directed.

M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.

M&L screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.

M&L 300x200x7 mm thick glazed ceramic coloured tiles as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.

M&L Glazed coloured / designed digital tiles in verticle surface each tiles exc 0.11 sqm but not exceeding 0.16 Sqm on vertical surfaces etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed.

M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L for glazed Vitrified Ceramic Dark shade/ Double charged / ultra charged tiles 10 mm thick square/ rectangular) polished area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match complete all as specified and directed.

M&L for glazed Vitrified Ceramic Dark shade/ Double charged / ultra charged tiles 10 mm thick square/ rectangular) polished area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm on vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match complete all as specified and directed.

M&L for vitrified light shade tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for vitrified light shade tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm on vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spd

M & L Machine cut Kota stone slab flooring 18-20 mm thick on floor over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L Machine cut Kota stone slab flooring 18-20 mm thick on vertical surfasces and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Green Marble of work 18 to 20mm thick (table rubbed and polished) in cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for 18 to 20mm thick lekha red Granite work for wall linning (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with notching complete all as specified and directed.

M &L 75 mm thick PCC (1 :4:8) type D2 using 40mm agg as in sub base complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Machine pressed coloured glazed cement concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with gray cement and pigment complete all as specified and directed.

M & L 100 mm thick PCC 1:2:4type B-2, (40mm graded aggregate) as in floors, surfaces finished fair and even complete all as specified and directed.

M&L for precast (factory casted) cement Concrete kerb stone casted in PCC (1:2:4) type B-1 using 20mm graded stone aggregate with plain or interlocking joints (as directed), making groove in ground of desired dimension, placing in erect position Kerb stone in edging and set and jointed in cement mortar 1:4, making good distrubed surface of ground complete all as specified and directed .

M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6).complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:6 on brick masonry surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick in CM 1:4 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .

S&F 500 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed. (Note : PVC tanks shall be ISI marked and having two layers)

S&F 1000 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed. (Note : PVC tanks shall be ISI marked and having two layers)

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs Vitreous China urinal full size complete including providing and fixing plugs,waste pipe 32mm dia ,bedding urinal against wall in cement mortar 1: 2, screwing urinal to plugs with and including 60 mm long brass screws pointing around urinal back in cement mortar complete all as specified.

S&F in repairs chromium plated brass tubular towel rail 20 mm dia, D type for wash hand basin centre holed fixed to iron pipe complete all as specified and directed.

S&F 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.

S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.

S&Fin repair swivel shower of CP for fixing with 15mm pipe (minimum weight 140 gms) complete all as specified and directed.

S&F 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 15mm bore stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 15 mm dia stop cock fancy type, chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed.

S&F in repair 20mm bore CP stop valve fancy type for union complete all as specified and directed.

S&F in repair bib taps 15mm bore fancy type CP for iron pipe or for union complete all as specified and directed.

S&Fin repair pillar taps (fancy type), of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S & F in repair viteous china squating pan " ORISSA PATTERN" of size 580mm x 440mm white with integral foot rest or back inlet incl PCC 1:2:4 type B-1 for making good the floor complete all as specified

S&F in repair vitrous china wash down water closet pan (padestal pattern), white including connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etcplastic water seat white/black pattern flat bottom and cover and mild stel chroumium plated. complete all as specified.

S & F Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed .

S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .

S&F in repair 15 mm dia Queen Angular CP Stop Cock with Wall Flange and fixed. Complete all as spd as directed.

Supply and fixing in repair for ISI marked Pillar Tap Swan neck of 15mm bore dia, chromium plated, fixed with iron pipe `complete all as specified and as directed.

S&F in Vitreous China counter top Oval type coloured wash basin suitable size make : Jaguar or equivalent including swan neck fancy type 15 mm dia CP pillar taps with bottle trap,fixing on counter top complete all as specified

S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia, 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including CI brackets all s directed.

S & F in repair for 15 mm bore Jaquar Bib Cock Queen's QQT-CHR-7037 chromium plated, complete all as specified and as directed . Make Jaguar or equivalent

S & F in repair for CP Jaquar Florentine Chrome Finish Brass Angle Valve (Bore dia of pipe in 15mm) fixed in repairs. Make Jaguar or equivalent

S & F in repair for CP angle cock suitable with wall flange fancy type (Bore dia of pipe in 15mm) fixed in repairs. Make Jaguar or equivalent

S&F in repair PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

S&F in repairs automatic sensor of Urinals incl connected accessories complete all as specified and directed .

S&F in repair chromium plated brass Plantex New Look Stainless Steel 304 Grade Dual Folding Towel Rack for Bathroom/Towel Stand/Hanger/Bathroom Accessories (24 Inch-Chrome) complete all as specified and directed. Make : Jaquar or equivalent

S&F in repairs Wall Mixer 3 in 1 System - Florentine (FLR 5281) , 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed Make Jaguar or equivalent

S&F in repair brass chromium plated health faucet Jaquar Brass Health Faucet with Long Cp Flexible Tube (Chrome Finish, 15 mm) complete all as specified and directed Make : Jaguar or equivalent

S&F in repair 32 mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed

S&F in repair 40 mm dia waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms)Ditto but suitable for urinals (Minimum weight 32mm-45gms) complete all as specified and directed.

S & F in repairs Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings,Size: 360x675x750 mm, S Trap-300 mm make Jaguar or equivalent including making good to floor complete all as specified and directed.

S & F in repairs, PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm complete all as specified and directed. (Cat Part No. 551 of Make Prayag or equivalent model of other makes all as spd and directed

S & F in repairs Toilet paper holder of brass chromium plated fixed to walls with chromium plated, brass screws complete all as specified and directed

S&F Jet spray CP Brass with 1.5m tube complete all as specified and directed.Make : Jaquar or equivalent

S&F in repairs 300 mm corner glass shelf with CP outer railing complete all as specified and directed

M&L Washed stone grit plaster on exterior wall in two layers, under layer 15mm cement plaster 1:4 (1 cement : 4 coarse sand) , mixed with water proofing compound liquid 150 ml / per 50 kg bag as per manufacturere instruction and shall be brought to true level and plumb by using wooden float after thoroughly wetting the surface. Grooves of size 20x15 mm or as specified shall be provided to form a design pattern on external facade . size of grit panel shall be of 600x1000 max. in light shade and all RCC elements viz.column , beams, roof slab and projected shall be of contrast shade and pattern & shall be approved by GE. All white or coloured marble stone chipping to be washed in clean water before use .Top layer shall be 15 mm thick comprising of mixed 35% of white & 65% of grey cement and white / approved coloured marble chips in proportion of (1:0.5:2)(1 mixed white grey cement or silver cement :0.5 marble powder and 2 marble chipping of 12 mm and down size including 15% pattern using white cement with pigments as approved by GE,the surface of the under coat shall be cleaned and a coat of grey cement slurry @ 2 kg /of cement / sqm ,shall be applied . Top layer shall be applied in uniform thickness and sufficiently pressed with wooden float for proper bonding with the under coat and finished to a true and plumb surface. all around as per approved pattern including scrubbing and washing, the top layer with all as specified (payment for providing grooves WPC liquid shall be made separately

Forming groove of uniform size 15mm wide and 20mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, Chajja ( up to IInd floor) etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm and not exc 20cm girth in brick walls complete all as specified and as directed.

M&L for preparation of old surfaces of AC sheet roofing including sweeping, washing with water and steel brushing, scraping down and applying one coat of cement base paint on AC sheet surfaces complete all as specified and directed

M & L for preparation of old decorated surfaces of ceiling, by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moss effloresence salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed .

M & L for preparation of old decorated plastered or unplastered surfaces of walls, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moss effloresence salts and trading oil and greasy spots and applying one coat of cement base paint (white or tinted) complete all as specified and directed .

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth including knotting and stopping and applying one coat of synthetic enamel paint (any tint/shade) complete all as specified and directed

M&L for preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth including and applying one coat of synthetic enamel paint (any tint/shade) complete all as specified and directed

M&L for old painted surfaces on kerb stone / cement surfaces applying one coat of synthetic enamel paint over one coat of Priming paints plaster coat of any description including clearing stopping rubbing down and removing all drops, dirts and splashes etc complete all as specified and directed

M&L for applying texture paint and finished (damasco) with the following process as per manufacturer instruction complete all as per specified and directed- (a) The surface should be completely dry and free from loose particles including two coats of wall putty including filling dents and preparing the surface with emry paper 180 No. (b) Wiping cleaning and applying one coat of primer and allow to dry for 6 to 8 hrs . (c) Preparation the surface with emry paper clean and apply two coat of emulsion paint followed by impression of spongy pattern using different tint of paint for DOMASCO.

M&L for applying texture paint and finished (rustic type) with the following process as per manufacturer instruction complete all as per specified and directed- (a) The surface should be completely dry and free from loose particles including two coats of wall putty including filling dents and preparing the surface with emry paper 180 No. (b) Wiping cleaning and applying one coat of primer and allow to dry for 6 to 8 hrs (c) Applying a coat of emulsion with steel trowel for rustic as per manufacturer instruction and finishing the surface with even grain for RUSTIC.

M& L for preparation of newly plasted wall surfaces and appltying three coats of texture (Super fine) finished painting with the following process the surfaces should be completely dry and free from loose particles including preparing the surface with emry paper 180 nos and wipring clean and applying one coat of primer and allow drying for 6 to 8 hours then smoothen the surface by filling dints with thin coat of acrylie wall putty after drying for 4 to 6 hours and preparing the surface with emry paper and clean and applying another coat of primer and allow drying for 6 to 8 hours and then emulsion 1 Ltr with 500 ml water and applying with brush follwed by rolling with sponge roller or filter roller, applying three coat with brush and roller with and interval of 3 to 4 hours between successive coat all as per manufactures instruction complete all as specified and directed

M&L for preparation of old plastered or unplastered surfaces of walls including cleaning the surface throughly by using wire brushes and removing use materials from the surface and applying two coats of Dust Resistant and Anti Algal Exterior Emulsion Apex Ultima of Asian Paints approved make complete all as specified and directed

M&L for complete removal of existing treatment on walls, chajjas etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of distemper with distemper oil emulsion and including one coat of 1mm thick double layer wall care putty complete all as specified and directed.

M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.

M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of untreated plastered surfaces and applying two coats of oil emulsion distemper over and including one coat of 1mm thick double coat wall care putty complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coat of cement base paint over and including a coat of cement primer complete all as specified and directed.

Note : Tenderers may note that amount of credit Rs 25,710.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

M/S Gupta Builders

shiv shakti contractor

M/S Ishwar Builder

UTTRAKHAND BUILDERS

j u enterprises

S S CONSTRUCTION CO

M/S ABHISHEK ENTERPRISES