Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 CrAdmitted-Finance D NO 35 14 13 1 R P PETA KANCHARAPALEM VISAKHAPATNAM 530 008 | VISAKHAPATANAM | ANDHRA PRADESH | 530008 | ₹1.4 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.5 CrAdmitted-Finance 24 85 7 SANATH NAGAR GAJUWAKA VISAKHAPATNAM 530 026 | VISAKHAPATANAM | ANDHRA PRADESH | 530026 | ₹1.5 Cr | L2 | Admitted-Finance |
| 3 | L3₹1.7 CrAdmitted-Finance DOOR NO 14 6 21 5 OPP MARVAL SCHOOL BC ROAD NEW GAJUWAKA VISAKHAPATNAM 530026 | VISAKHAPATNAM | VISAKHAPATNAM | ANDHRA PRADESH | 530026 | ₹1.7 Cr | L3 | Admitted-Finance |
| 4 | Rejected-Technical DOOR NO 38 I H COLONY MALKAPURAM POST VISAKHAPATNAM 530 011 | VISAKHAPATANAM | ANDHRA PRADESH | 530011 | - | - | Rejected-Technical Being not enlisted in relevant category |
| 5 | Rejected-Technical | - | - | Rejected-Technical Being three class below |
| Sl No | Description | Qty | Unit | REAL ENGINEERING WORKS L3 | M/S CHANDRA ENGINEERS AND CONTRACTORS L1 | V R K CONSTRUCTIONS L2 |
|---|---|---|---|---|---|---|
| 1.00 | S & F automatic viscous filter oil type (SAE- 30 oil) with following technical specifications:-
(a) Capacity : 120000 CMH
(b) Face Velocity : 2.5m/sec
(c) IPD: 4.0 mm WG
(d) FPD : 10.0 mm WG
(e) Efficiency : 90% down to 10 micron
(f) Mat Height : 3000mm
(g) Overall size : 4300 X 4000mm
(h) Make of the motor : Kirloskar 1.0 HP-02 Nos
(i) Duty cycle : 30 sec on & 12 mint off
Make of the Gearbox : Kirloskar | 6 | Each | 5,25,000 ₹31.5 L | 6,75,000 ₹40.5 L | 6,89,999 ₹41.4 L |
| 1.01Notes:- (i) The Rate quoted shall include taking down old viscous filter and depositing it to the AGE E/M MES store Yard (Dolphin Hill) (ii) SAE 30 oil shall be measured and paid separately in relevant items. (iii) The coated rate includes Dismentling of old foundation and S&F new foundation, foundation nut, bolts, washers,excavation, removing of soft soil and PCC, Cement Concrete foundation, filling and mass concrete type B2 (1:2:4) using 20 mm graded aggregate of size (as per site required ) for placing of automatic viscous filter or as per OEM recommendations complete all as specified and directed. (iv) Any other items which are not mentioned in the description of this item or not specified in the tender documents but the same are required for smooth operation of automatic viscous filter oil type shall be provided by the contractor without any extra cost to the Department.) (v) The drawings of the Viscous Filter should be approved by the Accepting Officer before placing order by the contractor. (vi) Contractor shall visit the site and check the dimensions facilitating easy entry / exist and installations, meeting existing conditions conforming to safety codes, before submitting the drawings for approval. | ||||||
| 2.00 | S & F Centrifugal belt type air blower and Motor with following Technical Specifications:-
(a) Air Flow (CFM) : 65000
(b) Static Pressure (mmWC): 60
(c) Working Temp. (Deg.C): 40
(d) BHP at Working: 31.1
(e) BHP at 20 deg.C: 33.5
(f) Total efficiency (%): 81.90%
(g) Motor HP/Pole/RPM: 40.0/4/1450
(h) Drive Arrangement: Belt driven
(i) Fan RPM: 480
(j) Impeller Type: Backward Curved
(k) Impeller Dia.(mm): ~1430
(l) Impeller Balancing As per ISO: 1940,Grade 2.5 | 6 | Each | 15,10,000 ₹90.6 L | 8,75,000 ₹52.5 L | 9,59,999 ₹57.6 L |
| 2.01(m) Fan Testing As per IS 4894 (n) Vibration Level As per ISO 14694:2003E-BV3 (o) Noise Level: 85+4 dB (I/L & O/L Ducted) (p) Impeller (BP/BL/FP): M.S., (10/3/3) (q) Hub : M.S./C.I (r) Shaft : EN-8 (s) Casing : M.S., 3mm (t) Fan Pedestal : M.S. (u) Base Frame : M.S. ( as per site required) (v) Anti Vibration Isolators : Polybond (w) Inlet Damper : M.S. (x) Expansion Bellow at Outlet : Silicon (y) Bearing DE & NDE : SKF-22218-EKC3 (z) Plummer Block DE & NDE : Masta-SN518 (aa) Fan Pulley : Fenner-4 SPB 600 (ab) Motor Pulley : Fenner-4 SPB 400 (ac) Belt : Fenner-SPB 4 Nos (ad) Belt Guard : M.S. | ||||||
| 2.02(ae) Hardware : STD (af) I/L &O/L Matching Flanges : M.S. (ag) Drain Plug and Socket : STD (ah) Inspection Window : M.S. (ai) Shaft Seal : Aluminium plate type (aj) Painting : Epoxy-Blue Motor Details:- (a) Make : Hindustan / Kirloskar / CG (b) Motor HP/Pole/RPM : 40.0/4/1450 (c) Motor Specifications : IP55, 415V/3ph/50 Hz, IE-3 (d) Motor Specifications : IP55, 415V/3ph/50 Hz, IE-3 (e) Motor Mounting : Foot Mounted | ||||||
| 2.03Notes:- (i) The Rate qouted shall include taking down old blower, motor and depositing it to the AGE E/M MES store Yard (Dolphin Hill ). (ii) The coated rate includes Dismentling of old foundation and S&F new foundation, foundation nut, bolts, washers,excavation, removing of soft soil and PCC, Cement Concrete foundation, filling and mass concrete type B2 (1:2:4) using 20 mm graded aggregate of size (as per site required ) for placing of Centrifugal belt type air blower and Motor or as per OEM recommendations complete all as specified and directed. (iii) The Rate qouted shall include connected existing duct any required items. (iv) Any other items which are not mentioned in the description of this item or not specified in the tender documents but the same are required for smooth operation of Centrifugal belt type air blower and Motor shall be provided by the contractor without any extra cost to the Department.) (v) The drawings of the blower should be approved by the Accepting Officer before placing order by the contractor. (vi) Contractor shall visit the site and check the dimensions facilitating easy entry / exist and installations, meeting existing conditions conforming to safety codes, before submitting the drawings for approval. (vii) The factory acceptance test shall be carried out by the rep of Accepting Officer prior to dispatch. Contractor shall inform the dates to the GE well in advance for factory inspection. | ||||||
| 3.00 | Supply and filling SAE 30 oil complete all as specified and as directed. [Make shall be Castrol / Servo / HPCL as approved by GE] | 2,700 | Ltr | 245 ₹6.6 L | 180 ₹4.9 L | 239 ₹6.5 L |
| 4.00 | S&L XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured ,electric power cables heavy duty with aluminium conductor, 1100 Volts grade of size 3.5 core 120 Sqmm complete in trenches/ ducts/ on pole etc including taking down existing unserviceable cable complete all as specified and as directed . | 250 | RM | 1,300 ₹3.3 L | 1,250 ₹3.1 L | 779 ₹1.9 L |
| 5.00 | Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in Soft / Loose soil complete all as specified and as directed. | 40.5 | Cum | 430 ₹17,415 | 450 ₹18,225 | 329 ₹13,324.50 |
| 6.00 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. | 21.13 | Cum | 160 ₹3,380.16 | 350 ₹7,394.10 | 122 ₹2,577.37 |
Updated dates
Tender Value
₹1.4 Cr
EMD Value
₹2.1 L
Closing Date
3 Jun 2026, 6:00 pmClosed
Col Shinde SS
Commander Works Engineers, Station Road, Visakhapatnam - 530 004
SPECIAL REPAIRS TO MECHANICAL VENTILATION PLANT 1B AGAINST BER ITEMS AT INS EKSILA UNDER AGE E M NO.III OF GE UI, VISAKHAPATNAM.
2026_MES_750109_3
82635/E8
Open Tender
Civil Works
270 days
VISAKHAPATNAM
As per NIT
9 documents required · 9 mandatory
₹1,000
GE Utility-I
₹2.1 L
Yes
19 Jun 2026
13 May 2026
5 Jun 2026
13 May 2026
3 Jun 2026
20 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | S & F automatic viscous filter oil type (SAE- 30 oil) with following technical specifications:-
(a) Capacity : 120000 CMH
(b) Face Velocity : 2.5m/sec
(c) IPD: 4.0 mm WG
(d) FPD : 10.0 mm WG
(e) Efficiency : 90% down to 10 micron
(f) Mat Height : 3000mm
(g) Overall size : 4300 X 4000mm
(h) Make of the motor : Kirloskar 1.0 HP-02 Nos
(i) Duty cycle : 30 sec on & 12 mint off
Make of the Gearbox : Kirloskar | 6 | Each | - | - |
| 2 | S & F Centrifugal belt type air blower and Motor with following Technical Specifications:-
(a) Air Flow (CFM) : 65000
(b) Static Pressure (mmWC): 60
(c) Working Temp. (Deg.C): 40
(d) BHP at Working: 31.1
(e) BHP at 20 deg.C: 33.5
(f) Total efficiency (%): 81.90%
(g) Motor HP/Pole/RPM: 40.0/4/1450
(h) Drive Arrangement: Belt driven
(i) Fan RPM: 480
(j) Impeller Type: Backward Curved
(k) Impeller Dia.(mm): ~1430
(l) Impeller Balancing As per ISO: 1940,Grade 2.5 | 6 | Each | - | - |
| 2.01 | (m) Fan Testing As per IS 4894
(n) Vibration Level As per ISO 14694:2003E-BV3
(o) Noise Level: 85+4 dB (I/L & O/L Ducted)
(p) Impeller (BP/BL/FP): M.S., (10/3/3)
(q) Hub : M.S./C.I
(r) Shaft : EN-8
(s) Casing : M.S., 3mm
(t) Fan Pedestal : M.S.
(u) Base Frame : M.S. ( as per site required)
(v) Anti Vibration Isolators : Polybond
(w) Inlet Damper : M.S.
(x) Expansion Bellow at Outlet : Silicon
(y) Bearing DE & NDE : SKF-22218-EKC3
(z) Plummer Block DE & NDE : Masta-SN518
(aa) Fan Pulley : Fenner-4 SPB 600
(ab) Motor Pulley : Fenner-4 SPB 400
(ac) Belt : Fenner-SPB 4 Nos
(ad) Belt Guard : M.S. | - | - | - | - |
| 2.02 | (ae) Hardware : STD
(af) I/L &O/L Matching Flanges : M.S.
(ag) Drain Plug and Socket : STD
(ah) Inspection Window : M.S.
(ai) Shaft Seal : Aluminium plate type
(aj) Painting : Epoxy-Blue
Motor Details:-
(a) Make : Hindustan / Kirloskar / CG
(b) Motor HP/Pole/RPM : 40.0/4/1450
(c) Motor Specifications : IP55, 415V/3ph/50 Hz, IE-3
(d) Motor Specifications : IP55, 415V/3ph/50 Hz, IE-3
(e) Motor Mounting : Foot Mounted | - | - | - | - |
| 3 | Supply and filling SAE 30 oil complete all as specified and as directed. [Make shall be Castrol / Servo / HPCL as approved by GE] | 2,700 | Ltr | - | - |
| 4 | S&L XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured ,electric power cables heavy duty with aluminium conductor, 1100 Volts grade of size 3.5 core 120 Sqmm complete in trenches/ ducts/ on pole etc including taking down existing unserviceable cable complete all as specified and as directed . | 250 | RM | - | - |
| 5 | Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in Soft / Loose soil complete all as specified and as directed. | 40.5 | Cum | - | - |
| 6 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. | 21.13 | Cum | - | - |
| 7 | Removal of surplus excavated material of any type not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point. complete all as specified and as directed | 15.85 | Cum | - | - |
| 8 | M&L for Sand cushioning/sand covering for underground cable protection/substation yard complete all as specified and as directed
[Note: Punned thickness only will be measured and paid.] | 16.2 | CUM | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.66 MB
BOQ_856953.xls
BOQ • 1.25 MB
82635Tender2.pdf
Tender Documents • 1.26 MB
Download all tender documents and submit your bid