SPECIAL REPAIR TO BLDG NOS P 152 P 112 A AND P 112 B AT MIL STN GANDHINAGAR

Amount

M&L for providing precast cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in manhole covers including placing the cover in position and set in cement mortar 1:6 complete all as specified and directed. Note : Reinforcement shall be measured and paid seperately.

M&L for old size fly ash Brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for fly ash Brick work with old size, sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M&L for cutting chases, pinning in, for brick walls, making good to facings for concealed water tubing etc. cutting exceeding 10cm but not exceeding 20cm girth complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed.

Taking down steel window/ventilator including grills of any description, n. exc 1.5 Sqm each including making good disturbed surface of Jamb, soffit etc complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed

S&F 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to wooden door Shutters/aluminium sliding shutters complete all as specified and directed.

S&F, stainless steel butt hinges, medium weight, of size 100 mm complete all as specified and directed.

S&F, Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending, hooking etc and binding with MS wire 0.9mm dia(annealed).

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.30mm (section No 20621), bottom size 92x31.75x1.30mm (section No-20620) and shutter top & bottom of size 40x18x1.29 mm (section No-20844) and sides (handle) of size 40x18x1.29mm (section No-20846) and lock side shutter frame of size 40x18x1.29 mm (Section No 20845) with rubber gasket, beading and locking arrangement and rollers etc including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 4mm thick glass (any shade) with necessary rubber beading gasket etc all as specified. Make:-Indal/ Jindal/ Hindalco.

M&L Aluminium powder coated (powder coated of requried colour) two track sliding windows frame top & sides of size 68.85x31.75x1.30mm (section No 20681), bottom size 68.85x31.75x1.20mm (section No 20619) and shutter top & bottom of size 40x18x1.29 mm (section No-20844) and sides (handle) of size 40x18x1.29mm (section No-20846) and lock side shutter frame of size 40x18x1.29 mm (Section No 20845) with rubber gasket, beading and locking arrangement and rollers etc including making good to the disturbed portion complete including 4mm thick glass any shade with necessary rubber beading gasket etc all as specified. Make:-Indal/ Jindal/ Hindalco.

S&F, aluminium powder coated (required colour to match window colour) grill of 5mm dia squares rectangular tringular circular shape aperture n.exc. 5 cm in length or width fixed with H or F channel complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for 75mm thick cement concrete 1:2:4 type B2, using 40mm graded stone aggregate as inflooring/hard standing and finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for 25mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring finished fair and even to receive floor finishes complete all as specified and directed.

M&L for non skid coloured tiles any colour 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm each in skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 450x300x6 to 7mm thick on vertical surface such as skirting/dado, set and jointed in net cement slurry and pointed in colour cement to match over 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L for light shade Vitrified ceramic (double charged) tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set jointed in neat cement slurry and pointed in shite or coloured cement to match including 15mm thick screed bed of CM 1:6 complete all as specified and directed.

M&L for light shade Vitrified ceramic (double charged) tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in skirtings etc set jointed in neat cement slurry and pointed in shite or coloured cement to match including 15mm thick screed bed of CM 1:6 complete all as specified and directed.

M&L for rendering cement plaster 10mm thick in cement mortar 1:3 on fair faces of concrete in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering cement plaster 10mm thick in cement mortar (1:4) on brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering cement plaster 10mm thick in cement mortar (1:6) on brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering cement plaster 15mm thick in cement mortar (1:4) on brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for water proofing of sunken portion of size 0.90 x 1.20 m consisting under mentioned items :- (i) 10 mm thick plastering in C:M 1:3 with liquid WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of bitminous primer @ 0.30 litre/sqm (WPC included) and conforming to IS-3384, laying APP based polyster modified membrane reinforced non wooven polyster of 3.50 Kg/Sqm (minimum), sealed by torching including demolition and removal of old concrete and provn of new lean cement concrete 1:5:10 type E 2 using 40 mm graded stone aggregate specified complete all as specified and directed

M&L for two coats of Acrylic distempe over one coat of 1mm thick wall care putty ( Make : Birla/JK White) base on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for complete removal of existing treatment (any no of layer) of wall and applying two coats of Acrylic distemper over and including one coat of minimum 1mm thick wall care putty (Make : Birla/JK White) base on old treated surface including preparation of surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified and directed.

M&L for preparation of old treated surface of wall and applying two coat of cement base paint complete all as specified and directed.

M&L for preparing old plastered or un-plastered surfaces and applying two coat of white wash on ceilings complete all as specified and directed.

M&L for preparing new plastered or un-plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 25mm bore of pipe complete all as specified and directed.

S&F, in repair, 40mm bore, low density polyethelene pipe (LDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed.

Supplying and laying of 20mm outer dia CPVC pipes SDR 13.5 fittings on walls/ceiling or laying in floors including connection to old GI Pipe (if requried) complete all as specified and directed.

Supplying and laying of 25mm outer dia CPVC pipes SDR 13.5 fittings on walls/ceiling or laying in floors including connection to old GI Pipe (if requried) complete all as specified and directed.

S&F of 20 mm outer dia CPVC elbow (3/4x 1/2) with brass thread at one end for fixing of taps etc and other end plain complete all as specified

S&F of 20mm outer dia CPVC Tee with brass thread at one end for fixing of taps etc and other end plain complete all as specified

S&F of 20 mm outer dia CPVC adopter with female brass thread at one end for fixing of taps etc and other end plain complete all as specified

S&F, in repair, 15mm dia Brass CP bib cock, long body cast copper alloy fancy type with long shank capstain head serewed down high pressure pipe in repairs complete all as specified and directed.

Supply only pillar taps fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed 15 mm bore dia complete all as specified and directed.

S&F, in repairs, chromium plated Stop Valves (Angle type) fancy type 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as directed.

S&F, in repair, 15mm dia stop valves cast copper alloy fancy type chromium plated with long shank and cup (conceled type) screwed down, high pressure with capstain head , screwed both ends, fixed as in repairs complete all as specified and directed.

Supply only, 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F, in repair Gratting square 150mm size of PTMT (Minum weight 100 gms) complete all as specified and directed.

Supply only PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack 'Z' clamp complete all as specified and directed.

S&F, 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including 'Z' clamp complete all as specified and directed.

S&F, 75mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F, 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) Tee equal or unequal any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) Tee equal or unequal any radius complete all as specified and directed.

S&F, 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F, in repair, PVC (SWR) nahani trap, with chromium plated grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.

S&F, in repairs, vitreous china squatting pan, 'Orissa’ pattern, white of size 580mm x 440mm with integral foot rest, P or S trap (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs, vitreous china urinal, (345 x 320 x 560mm) flat back, of white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete incl providing and fixing plug, bedding urinal against wall in CM (1:2), securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, gratings and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F, in repair, brass chromium plated shower rose with or without swivel joint, 125mm size complete all as specified and directed.

Supply only chromium plated heavy duty urinal spreader complete all as specified and directed.

S&F, in repair, vitreous china counter wash basin, oval type, flat back, 560 x 470 x 220mm size, snow white, inserted in granite slab chromium plated waste pipe of suitable length including taking down existing wash basin complete all as specified and directed.

S&F, in repair, corner glass shelf with CP brackets and with decorative railing fixed to wall complete all as specified and directed.

S&F, in repair, stainless steel tubular towel rail 20mm dia, D type, 600mm long complete all as specified and directed.

S&F, in repair, 25mm dia, 1mm wall thickness stainless steel fancy type heavy duty curtain rod with decorative ball type side brackets (as per sample) fix with wooden gutties complete all as specified and directed.

S&F, in repair, two piece wall hung extended EWC of size 645 x 350 x 700mm with seat cover and cistern with twin flush fitting Cat No. S1031103, S106013 (Cistern), B152084 (Campbell), B18101106 (Flush fitting) white colour for Cera or equivalent make as approved by GE.

S&F, in repair, counter top WBH of 550x440x140mm snow White complete all as specified and directed as per Cat No. S2020137 of Cera or equivalent make as approved by GE.

S&F, in repair, CP Swan neck pillar tap with left/right hand operating knob Cat No. F2014104 of Cera or equivalent as approved by GE.

S&F, in repair, CP Bib Cock 2 in 1 with single handle and wall flange Cat. No. F2014163 of Cera or equivalent.

Supply only PVC waste pipe 32mm bore of size 800 mm long complete all as specified and directed.

Supply only PVC low level flushing cistern 10 Ltr capacity including all fitting such as flush pipe brackets complete all as specified and directed.

S&F, in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed

S&F, in repair, Soap dish, stainless steel, standard size Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.

Demolition of reinforced cement concrete as in manhole covers, etc complete all as specified and directed.

Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar for 110mm and 75mm bore of pipe from wall/floors etc complete all as specified and directed.

Taking down carefully copper/Aluminium point wiring (Light, fan, socket or power) complete including fitting such as switches, socket, bell pushes, ceiling roses, pendants/batten holder, call bell, regulators etc all as specified and directed by Engr-in-charge.

M&L for wiring with and including multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with provision sunken concealed terminal boxes complete all as specified and directed for the followings :-

(a) One light/fan /Exhaust point controlled by one switch

(b) One multi purpose socket 5 Amps, Independent board.

M&L for wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC concealed conduit of 20mm bore fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box complete all as specified and directed.

S&F, in repairs, LED light fitting, 1 x 20 watt 220V, AC, decorative box type with driver , holder , including LED tube light complete set flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed.

S&F, lamp holder insulated body with back plate for battern fittings complete all as specified and directed.

S&F Switch piano, flush type 5 Amps One Way 230 volts complete all as specified.

S&F Switch one way 15 Amps flush type 230 volts complete all as specified.

S&F, in repair, socket outlet multipurpose, 3 pin, 15 Amps flush type complete all as specified and directed.

S&F Socket outlet 2-in-1 3 pin 6 & 16 Amps flush type 230 volts complete all as specified.

S&F Sheet metal enclosure double door for DB's SPN 8 way 240 V having 200 A rated bus bar complete all as specified and directed by Engr-Incharge.

S&F, in repair, Distribution Board SPN 4 way, 240 volts, factory made powder coated, double door with neutral and earth link, suitable for fixing MCB,s complete including connecting all as specified and directed.

S&F Ceiling rose 3 terminal size 50x65mm surface type 230 volts complete all as specified.

Taking down existing exhaust fan and keeping safe custody and re-installation the same after completion of work completed all as specified and directed.

S&F MCB SP 6-32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge.

S&F, in repair, MCB’s SPN 32 Amps 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

Taking down existing exhaust fan and depositing in MES store yard for keeping in safe custody complete all as specified and directed.

Supply and fix of exhaust fan, 300 mm sweep, 1400 rpm, MS body heavy duty, AC single phase, 230 volts with, blades, and frame and louvers including connection with 0.5 sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed. Make : Crompton/Havells/Khaitan/Almonard/Bajaj

M&L in replacement sub-main wiring with 2 single core 4 Sqmm PVC insulated, unsheathed, 1100Volts grade, copper multi stranded conductor drawn in and including PVC concealed conduit and conduit assessories including drawing a run of PVC insulated, unsheathed, 650/1100Volts grade, copper conductor multi stranded 4 Sqmm size as continuous earth wire drawn through and connected to main switch/ DB and testing on completion. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length. (ii) Rates quoted shall be inclusive of cutting wall for concealing conduit and making good the same in cement mortar 1:3.

TECH SERVE SOLUTIONS

Ramdev and Sons

Haritwal traders

ALBA AC AND REF SERVICES

DMA PROJECTS

SHELDON CONSTRUCTION

divyarsh entrprise

Priya Construction co.

SNEH TRADERS

ARTI CONSTRUCTION