SPECIAL REPAIR TO BLDG NO 11 DD AT CHAUBATTIA UNDER GE RANIKHET

Amount

BOQ ( Sch 'A') B/R items Dismantling plain or corrugated steel sheeting any guage, thickness, including Nainital pattern or similar pattern roof covering complete all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

Supply & fixing of powder coated GI ceiling grid frame work for false celling comprising of the following sections for making partitions of 600x600 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 2mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 37mmx24mmx0.3mm thick , cross tee shall be 28mmx24mmx0.3mm thick and wall angle shall be 24mmx24mmx0.3 mm thick complete all as specified and directed.

Supply & fixing 4 mm thick designer ceiling (E-board classic) board / tiles for insulation and accoustic purpose, 595 X 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed

Fixing only ceiling board complete all as specified and directed

Supply & fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw complete as specified and directed

Supply & fixing Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material & Labour Glazed ceramic tiles of size 300x450x7mm thick, coloured, including highlighter tiles, design and pattern as approved fixed as in vertical surface such as skirting,dado and riser to steps etc, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match over with and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S & F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and similar work conforming Fe 410-w (Gde-E-250) quality-A complete all as specifies and directed.

M&L in repair for welded wire fabric supplied and fixed complete to wood or steel member complete all as specified and directed .

Material & labour for Vitrified ceramic tiles 10mm thick coloured ( square/rectangular) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile over with and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

All as per item no 13 here-in-before but as in vertical surfaces with and including 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames, glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

Supply & Fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed

Supply & Fixing 3 mm thick Figured glass, pin headed type and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.

Demolition of brick work or stone masonry precast PCC block walling built in cement mortar complete all as specified and directed.

Material & Labour for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6 mtr mean radius, built in CM 1:6 complete all as specified and directed.

Material & Labour for precast cement concrete block masonery with solid block of cement concrete 1:3:6 type C-1 ( using 20 mm graded stone aggregate) exc 10 cm in width and setting in CM 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or PCC blocks or stone wall or concrete surface etc including raking out joints, hacking for keys, scrubbing down with water etc and removing rubbish to a dostance not exc 50 m complete all as specified and directed.

Material and labour for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfaces and finishing the surface fair and even complete all as specified and directed.

Material & Labour for 10mm thick rendering in CM 1:3 on on plastered or concrete surfaces as on ceiling finishing the surfaces fair and even complete all as specified and directed.

Material & Labour for 10mm thick rendering in CM 1:4 fair faces of brick work or concrete surfaces finishing the surfaces fair and even complete all as specified and directed.

Supply & Fixing galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Supply & Fixing in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description, not otherwise described,over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description, not otherwise described,over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material & Labour for preparation of new plastered surface of wall, applying a layer of wall care putty 2mm thick average including cornics etc for proper levelling of plaster and applying two coats of distemper oil emulsion over a coat of primer of chalk whiting , on plastered surfaces, preparatory to distempering complete all as specified and directed.

Complete removal of existing treatment of old decorated plastered surface of wall, applying a layer of wall care putty 2mm thick average including cornics etc for proper levelling of plaster and applying two coats of distemper oil emulsion over a coat of primer of chalk whiting , on plastered surfaces, preparatory to distempering complete all as specified and directed.

Material & Labour for preparation of new plastered surface of wall, applying a layer of wall care putty 2mm thick average including cornics etc for proper levelling of plaster and applying two coats of cement base paint over coat of primer of chalk whiting , on plastered surfaces, preparatory to distempering complete all as specified and directed.

Material & Labour for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Dismantling laid dry or laid dry and pointed stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and disposal of unserviceable materials, debris and rubish to a distance not exc 50m complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and disposal of unserviceable materials, debris and rubish to a distance not exc 50m as directed by Engr-in-Charge complete all as specified.

Material & Labour for brick work with sub class `B’ bricks, straight on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

Material & Labour for raised pointing in CM 1:3 to block in course or ashlar masonry or concrete block walling complete all as specified and directed.

M & L PCC 1:2:4 type B1 using 20mm graded stone agg as in precast cover slab for main holes, drains, channels etc set in cement mortar 1:4 including necessary from work all as specified and directed.

Material & Labour for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channels 30cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc all as specified and directed.

Supply & fixing for 8mm thick, wooden pieces, machine presured one side laminated and other side balancing green, as in parquet flooring with and including necessary padding as soft wool graded type as required at site, fixed with adhesive as per manufacturer's instructions including taking down old wooden flooring with or without plywood complete all as specified and directed.

Material & Labour for 9mm thick plywood, graded BWR, type BB fixed with rawl plug and screws to timber framework fixed as in repair of any thickness complete all as specified and directed.

Material & Labour for Black Granite ( of any type ) tiles 20mm thick machine cut, as in cooking & WHB plateform bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of granite stone including grinding and polishing over with and including 15mm thick bedding layer in CM 1:6 complete all as specified and directed

Material & Labour for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone agg) as in plinth protection laid to slope in bays and finishing the surfaces of concrete topping fair and even and exposed edges fair or rounding or chamfering laid in panels including necessary form work complete all as specified and directed.

Material & Labour for reinforced cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate), as in Slab supported on walls,beams,roof, landing, balconies,complete all as specified.

Use and waste of Formwork to soffits of suspended stab such as roof slabs, floor slabs, landings and similar work, not exc. 200mm thick (Horizontal or slopping rough finished surface of concrete flat complete all as specified and directed.

Material & labour mild steel reinforcement TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Dismantling of CI or reinforced concrete drain pipes,150 mm dia jointed in cement mortor and taking out of trenches all as specified

M & L 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed as specified complete all as specified and directed.

M & L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150mm bore complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position as in framed work complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Material & Labour 2nd class hard wood as in scantling clean sawn in floor, truss, roof, purlin of any description in framed work complete all as specified and directed.

Supply & Fixing 25mm thick 2nd class hard wood boarding planned one side fixed with butt joints with nails in any situation/ position except flooring and skirting complete all as specified and directed.

Fixing only 25mm thick 2nd class hard wood boarding planned one side fixed with butt joints with nails in any situation/ position except flooring and skirting complete all as specified and directed.

Taking down chowkats or frames n.exc 1.5 Sqm each with shutters (without taking off shutters from the frame) and removed by the contractor complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm each with shutters (without taking off shutters from the frame) and removed by the contractor complete all as specified and directed.

Taking down shutter only area n.exc. 1.00 sqm each and removed by the contractor complete all as specified and directed.

Refixing shutter only area n.exc. 1.00 sqm each in same opening complete all as specified and directed.

Supply & Fixing 2nd class hard wood (SAL) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints and fixed to any position complete all as specified and directed.

Supply & Fixing Factory made single extruded WPC (wood polymer Composite) solid door/ window/ Ceosetory window & other Frames/ Chowkhat of size 45 x 70 mm comprising of PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N / mm 2 and resistance to spread of flame of Class A catogory with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)

Supply & fixing Factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrwal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N mm2 modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, water/ moisture proof and fire retardanat and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge (Note:- Butt hinges and necessary screws shall be paid separately.

Supply & Fixing 35mm thick (batten thickness) IInd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

Supply & Fixing 35mm thick IInd class hard wood glazed and skelton door shutters open rebated and prepared to receive glass, guage etc, without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, guage etc, size of members of shutters as specified in MES SSR Part-I, Section 8, Clause 8.24 (a) complete all as specified and directed.

Supply & Fixing 30mm thick IInd class hard wood glazed and skelton door shutters open rebated and prepared to receive glass, guage etc, without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, guage etc, size of members of shutters as specified in MES SSR Part-I, Section 8, Clause 8.24 (b) complete all as specified and directed.

Supply & Fixing 150 mm size aluminium handle cast type anodised complete all as specified and directed.

Supply & Fixing 100 mm size aluminium handle plate type anodised complete all as specified and directed.

Supply & Fixing 100mm size MS butt hinges, medium weight, cold rolled complete all as specified and directed.

Supply & Fixing 75mm size MS butt hinges, medium weight, cold rolled complete all as specified and directed.

Supply & Fixing 150mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply & Fixing100mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply & fixing Aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extruded sections or cast aluminium alloy and fixed 300 mm long complete all as specified and directed.

Material & Labour for preparation of new or previously untreated wooden surfaces of any description,not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of new steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified.

Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing including cleaning for refixing or removal from site complete all as specified and directed.

Material & Labour for 15mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Fixing only 15mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Material & Labour for 20 mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Fixing only 20 mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Supply and fixing in repairs bib tap 15mm dia cast copper alloy, chromium plated fancy type long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply & fixing in repair CI nahani trap or floor traps of size 75mm with grating including jointing to waste pipe with cement concrete 1:2:4 type B1 complete all as specified and directed.

Excavating in trenches in hard / dense soil n exc 1.50 m wide and n exc 1.50 m in depth for foundation for pipes, walls, cesspits, manholes, pier holes, cables etc n exc 10 Sqm on plan and n exc 1.50 m in depth and getting out complete all as specified and directed .

Returning, filling in, spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each in hard / dense soil complete all as specified.

Removal of excavated soil to a distance exc. 250m but n exc 1.5 km and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified.

Dismantling water tanks of any description, capacity exceeding 250 litres but not exceeding 500 liters complete all as specified and directed.

Supply & Fixing White coloured rotational moulded polythene water storage tanks Triple layered (cylindrical vertical with closed top) hoisted and fixed in postion 500 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram of complete all as specified and directed.

S and F Ball brass valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Supply & Fixing in repair polymer white low level flushing cistern 10 Ltrs capacity, valveless, syphonic action type complete with inlet, ball valve float valve, bends brackets, rawl plug, brass screws handle etc complete all as specified and directed.

Supply & Fixing in repairs, 550x400mm vitreous China, white wash hand basin , oval type including suitable size brackets, waste pipe and waste coupling complete all as specified and directed.

Supply and fixing in repair pillar tap fancy type 15mm dia cast copper alloy with capstan head chromium plated, screwed down high pressure, with or without letters ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified.

Supply & Fixing PVC connection pipe 45 cm long with two brass nuts (union) at ends, for 15 mm dia, complete all as specified and directed.

Supply & Fixing 32 mm bore high density polythylene pipe ( HDPE ) 600mm long complete all as specified and directed.

Supply & Fixing in repairs chromium plated Towel rod 20 mm dia D type 600 mm long of between flange including CP brass screw and wooden/ plastic sheet with fixing arrangement complete all as specified and directed.

Supply and fixing in repairs 15mm bore stop valve chromium plated fancy type cast copper alloy , screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified .

S & F in repairs 15 mm bore Fancy type chromium plated central hole Wash Basin Mixer without popup waste system with 450mm long braided hoses, screwed down high pressure with or without lettered hot and cold screwed for iron pipe complete all as specified and directed. Make:- Jaquar Cat No CON-167KNB or Equavalent make approved by GE.

S & F in repairs 15 mm bore Fancy type chromium plated Wall Mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs and wall flanges, screwed down high pressure with or without lettered hot and cold screwed for iron pipe complete all as specified and directed. Make:- Jaquar Cat No CON-273KNUPR or Equivalent make approved by GE.

Supply & fixing in reapirs 100 mm bore cast iron pipe (sand cast) as in soil, waste and vent pipe, in any length with or without ears, with cement joints fixed to walls with & including mild steel work as in small articles such as stack clamps, flat iron, stays, including bolts and nuts and securing ends of stays to wall complete all as specified & directed.

Supply & fixing in repair 75 mm bore cast iron pipe (sand cast) as in soil, waste and vent pipe, in any length with or without ears, with cement joints fixed to walls with & including mild steel work as in small articles such as stack clamps, flat iron, stays, including bolts and nuts and securing ends of stays to wall complete all as specified & directed.

Supply & fixing 100mm bore cast iron bend of any radius, diminishing piece or tappers including taking down existing & making good to match with existing surfaces complete all as specified and as directed.

Supply & fixing 100 mm bore cast iron cowl including taking down existing & making good to match with existing surfaces complete all as specified and as directed.

Supply & fixing 75mm bore cast iron bend of any radius, diminishing piece or tappers including taking down existing & making good to match with existing surfaces complete all as specified and as directed.

Supply & fixing salt glazed stoneware gully trap,size 100x100 square or rounded mounted type P/S including setting and jointing to drain with CM 1:1 complete all as specified and as directed.

Supply and fixing in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plug washer and waste including bedding in cement mortar on to dwarf wall or incuding fixing cantilever brackets and connecting union to pipe over all size 915mm x460mm bowel size 410mm x 330mm x160mm complete all as specified and directed.

Supply and Fixing 32 mm dia waste fitting ,brass,chromium plated for glazedware sink, basin etc with long screwed shank and fly nuts ,flange end bedded in red lead cement and other end fixed complete all as specified.

Supply and Fixing in repair chromium plated shower rose, swivel 125 mm size complete all as specified.

Supply and Fixing in repair 20mm dia aluminium alloy anodised curtain rod decorative fancy type with brackets complete all as specified.

Material & Labour cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:4 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed.

Material and labour for 10mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces and finishing the surface even and smooth without using extra cement as in skarting/dado complete all as specified and directed.

Supply & Fixing in repair vitreous china premium/ first quality wash down water closet wall hung EWC white/ivory / off white (closed pattern including all necessary accessories like rag bolts/ gel gasket etc) excluding flushing cistern and flush pipe complete all as specified and directed.

E/M Portion Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, sockets, lamp holders, brackets, bulk head fittings, light fittings etc. and making good disturbed surfaces of walls etc. as per existing finishes by plastering, repairs and white / colour wash etc. complete all as specified and directed.

Supply & fixing point wiring for one light point/ fan point/ bell point / 5Amps socket out let (independent)point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia )with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed ( Note:- wiring shall be done in colour coding)

All as per item No.114 above but One light point controlled by two way switch.

All as per item No.114 above but one socket outlet 5 pin 5 amps controlled by one switch on same board.

All as per item No.114 above but one socket outlet 5 pin 5 amps controlled by one switch on independent board.

All as per item No 114 herein before but wiring with 2.5 sqmm copper wire (FRLS) PVC and 1.5 sqmm earth wire for socket outlet 6 pin 16 amps on independent board.

Suppy & Fixing switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply & Fixing switch piano flush type single pole, Two way 6 Amp complete all as specified and directed.

Supply & Fixing socket out let multi 5 pin, 5 Amps, flush type complete all as specified and directed.

Supply & Fixing switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

Supply & Fixing socket out let 2 in1,3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

Supply & Fixing ceiling rose, PVC/ Poly carbonate, isolated body three terminal complete all as specified and directed.

Supply & Fixing lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply & Fixing call bell ding dong AC, 230V single pole complete all as specified and directed,

Supply & Fixing bell push piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply & fixing of LED bulb 9 watt complete all as specified and directed.

Supply and fixing LED light fittings 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three flexible copper conductor cable of size from ceiling rose complete all as specified and directed. Make Havells Cat Part No REGAL BATTEN T8 UPTO1X22WDSBSWH. C&S Cat Part No LTIC00120WLEDWD Crompton Cat Part No LCTL-18-CDL incl LED tube light with G-13 lamp holder 20W

Supply & Fixing 240 V, 10 KA 'B' curve miniature circiut breaker ( MCB) of single poles and current carrying capacity 5 to 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply & Fixing 240 V, 10 KA 'B' curve miniature circiut breaker ( MCB) of single poles neutral ( SPN) and current carrying capacity 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing of sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 12 ways with 200 Amp rated bus bar, 240 volts including blanking plates fixed sunk / flush to the wall or niche complete all as specified and directed.

Supply and fixing of sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 volt 20 Amp complete all as specified and directed.

Supply & Fixing 415 V, 10 KA 'B' curve miniature circiut breaker ( MCB) of four poles and current carrying capacity 40 to 100 Amp, complete all as specified and directed.

Supply and fixing of sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, triple pole and neutral, 4 ways with 415 Amp rated bus bar, 415 volts including blanking plate fixed sunk / flush to the wall or niche complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm including cutting openings, through brick/ stone wall , making of holes and grouting of suitable size of nuts and bolts for 250 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accesssories complete all as specified and directed.

Taking down storage type water heater (geyser) of any type /make up to 50 Ltr capacity after disconnecting electric and water connections and refixing the same after carrying out necessary repairs including reconnecting the electric and water connections and testing complete all as specified and diected.

Supply, laying and testing cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 4 core.

Material & labour for sub main wiring with 1100 volt grade two single core PVC insulated and unsheathed cable with stranded copper conductor 6 sqmm (FRLS) drawn into and including electrical grade PVC conduit ISI marked not less than 25 mm dia with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 6 sqmm multi - stranded copper conductor as earth wire in green colour including taking down existing unserviceable sub main wiring complete all as specified and directed. NOTE: - 2 runs of 6 sqmm single cable , one run of 6 sqmm earth wire cable and PVC conduit shall be considered as one unit/1Rm)

Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as specified and directed. Note :-Punned down thickness of sand shall be considered for measurement).

Material and labour for brick protection to cable using old size class 'B' bricks, laid flat, dry butt jointed, laid lengthwise perpendicular to the axis of cable complete all as specified and directed by Engineer-in-charge.

Supply and fixing / laying of galvanized iron pipe of 40 mm nominal bore light grade for cable protection, fixed to pole/ alongwall/ floor/ under road/ across the drain or nallaha etc with clamps nuts, bolts and washers complete all as specified and directed. Note : The cost of MS clamp, nut, bolt, washer and GI fittings etc shall be included in the item rate.

Material and labour for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate), duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C1, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete and testing on completion all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone by the contractor at no extra cost to Govt.

Supply & Fixing LED street light fitting 60W, 230V AC outdoor type with high pressure die cast aluminium IP66 roadway luminaire with high power LED as light source and electronic driver including GI bracket light grade with impact and corrosion resistant including thermal management in multiple optics and provn of electric supply to fitting from source by means of PVC Sheathed multi-stranded aluminium conductor cable complete including taking down existing old light fitting any type all as specified and directed. Make Havells Cat Part No ENDURAPEARLNEOSL60WLED757PASYTOPC. C&S Cat Part No INDUS-i/60W,LTESSI60WLED Crompton Cat Part No LST-60-CDL-M

Supply & Fixing high quality LED lighting fixture mirror type with high output diffuser 2 feet 1x5 watt 220V AC, complete with polycarbonate tube, white/ warm white suitable for mirror light internall prewired of 1.5 sqmm three core flexible cable complete all as specified and directed.

Supply & Fixing Exhaust fan steel body heavy duty ISI mark, 300 mm size with louvers including all connecting accessories including, cutting, opening through bricks/ stone wall for fixing in openings , grounting of suitable size of nuts & bolts for exhaust fan and making good distrubed surface , connecting flexible cable wire from ceiling rose to exhaust fan complete all as specified and directed .

Supply & Fixing LED bulk head fitting, 1x10 watt with PDC aluminium housing and milky diffuser with all accessories and including connecting up with twin core twisted flexible copper conductor cable suitable size of 230 volts, 50 HZ complete all as specified and directed. Make Havells Cat Part No HEXAFT 10W LED857SSTMBPOC. C&S Cat Part NO e-TATRA/10W, Crompton Cat Part NO LMHE-10CDL

NK CONSTRUCTION

aditya construction