Kerala

AOC

Works

Civil Works - Buildings

Project No.314/23-24, Construction of Compound wall and additional works in Pallikkunnu Govt. Homoeo Dispensary at Pallikkunnu Zonal

Local Self Government Department

Pallikkunnu | Kannur, Kerala

Amount: ₹8.5 LCloses: 30 Sept 2025Closed

Timeline

Published24 Sept 2025
Closed30 Sept 2025
Technical Evaluation20 Nov 2025
Financial Evaluation20 Nov 2025
Awarded21 Aug 2026

Bids

Item Rate

1 Bid21 Aug 2026

#	Company	Amount	Rank	Status
1	ASHIQUE.K.P 1₹9.1 LAccepted-AOC	₹9.1 L	1	Accepted-AOC L1

BoQ Comparative

Line Items (25)

Sl No	Description	Qty	Unit	ASHIQUE.K.P L1
1.00Detailed Estimate
1.00	2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared	100	sqm	15.74 ₹1,574 Lowest
1.00	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	486.28	kg	202.53 ₹98,486.69 Lowest
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	103.68	kg	162.49 ₹16,846.96 Lowest
1.00	OD513452/2024-2025:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	96	sqm	571.28 ₹54,842.88 Lowest
1.00	OD349120/2023-2024: Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.(modified 50.6.7.2)	4.86	cum	11,831.45 ₹57,500.85 Lowest
1.01	OD349121/2023-2024:Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.(Modified item 50.6.7.1)	11.34	cum	6,600.33 ₹74,847.74 Lowest
1.01	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	122.4	sqm	335.01 ₹41,005.22 Lowest
1.01	13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	122.4	sqm	75.36 ₹9,224.06 Lowest
1.01	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	122.4	sqm	161.5 ₹19,767.6 Lowest

Tender Value

₹8.5 L

EMD Value

₹21,172

Closing Date

30 Sept 2025, 6:00 pmClosed

Tender Inviting Organisation

Name

Assistant Engineer

Address

LSGD Section, Pallikkunnu Zonal

Work Description

Construction of Compound wall and additional works in Pallikkunnu Govt. Homoeo Dispensary at Pallikkunnu Zonal

Tender Information

Tender ID

2025_LSGD_801855_1

Reference Number

AE/LSGD/KMCPK/ReET/25-26(2)

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Period of Work

180 days

Location

Pallikkunnu

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

11 documents required · 11 mandatory

Fee/PreQual/Technical/Finance

Required1) Copy of Remittance towards Bid Submission fee and Bid security. (.pdf)

Required2) Copy of Conformation of Bid Submission in the E-tenders portal. (.pdf)

Required3) Self attested copy of the bidders valid registration certificate in Kerala PWD,CPWD or other appr (.pdf)

Required4) Duly filled and signed copy of bid submission letter as per item no.1 part VI of this Bid documen (.pdf)

Required5) Duly filled and signed copy of preliminary agreement as per item no.2 part VI of this Bid docume (.pdf)

Required6) Duly filled and signed copy of integrity pact certificate as per item no.3 part VI of this Bid d (.pdf)

Required7) Duly filled and signed copy of affidavit as per item no.4 part VI of this Bid document in origin (.pdf)

Required8) Duly filled and signed copy of requisition for E-payment form as per item no.6 part VI of this B (.pdf)

Required9) Bid security excemption certificate if any. (.pdf)

Required10) Filled tender document (.pdf)

Required11)Tender Schedule BOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,870

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹21,172

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

21 Aug 2026

Published

24 Sept 2025

Bid Opening

3 Oct 2025

Download Starts

24 Sept 2025

Download Ends

30 Sept 2025

Submission Starts

24 Sept 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

finance_1331842.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

ASHIQUE.K.P

1₹9.1 LAccepted-AOC

Sl No	Description	Qty	Unit	ASHIQUE.K.P L1
1.00Detailed Estimate
1.00	2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared	100	sqm	15.74 ₹1,574 Lowest
1.00	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	486.28	kg	202.53 ₹98,486.69 Lowest
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	103.68	kg	162.49 ₹16,846.96 Lowest
1.00	OD513452/2024-2025:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	96	sqm	571.28 ₹54,842.88 Lowest
1.00	OD349120/2023-2024: Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.(modified 50.6.7.2)	4.86	cum	11,831.45 ₹57,500.85 Lowest
1.01	OD349121/2023-2024:Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.(Modified item 50.6.7.1)	11.34	cum	6,600.33 ₹74,847.74 Lowest
1.01	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	122.4	sqm	335.01 ₹41,005.22 Lowest
1.01	13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	122.4	sqm	75.36 ₹9,224.06 Lowest
1.01	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	122.4	sqm	161.5 ₹19,767.6 Lowest

Sl No

Description

Qty

Unit

ASHIQUE.K.P

1.00Detailed Estimate

1.00

2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

100

sqm

15.74

₹1,574

Lowest

1.00

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

486.28

202.53

₹98,486.69

Lowest

1.00

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

103.68

162.49

₹16,846.96

Lowest

1.00

OD513452/2024-2025:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

sqm

571.28

₹54,842.88

Lowest

1.00

OD349120/2023-2024: Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.(modified 50.6.7.2)

4.86

cum

11,831.45

₹57,500.85

Lowest

1.01

OD349121/2023-2024:Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.(Modified item 50.6.7.1)

11.34

cum

6,600.33

₹74,847.74

Lowest

1.01

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

122.4

sqm

335.01

₹41,005.22

Lowest

1.01

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

122.4

sqm

75.36

₹9,224.06

Lowest

1.01

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

122.4

sqm

161.5

₹19,767.6

Lowest