CA NO GE SOUTH AMB 20 2021 2022 PERIODICAL SERVICES TO OTM ACCN OF AGE B AND R I UNDER GE SOUTH AMBALA CANTT

Amount

Material and labour for cutting and uprooting of tree roots and unwanted vegetation on roof and wall surfaces by digging safely in concrete roof or brick wall and pouring acid or approved chemical to avoid further growth of roots and making good the surfaces by filling cracks and disturbed portion in cement mortar (1:3) or PCC 1:2:4 type B-0 (using 12.5mm size crushed stone aggregate) without using extra cement, complete all as specified and directed.

Material and labour for complete removal of existing treatment on surfaces of walls by using appropriate technique as approved by Engr-in-charge for complete removal of all layers of old treatment and reaching upto old plastered surface or unplastered surface as per site condition, including filling up all cracks and voids with Shalimar tar plastic (STP) crack filler and also making good to plastered surface, if any, and applying two coat of exterior emulsion paint over a coat of alkaline resistant primer, complete all as specified and directed. (New colour coding shall be as approved by GE)

Material and labour for complete removal of existing treatment on surfaces of walls by using appropriate technique as approved by Engr-in-charge for complete removal of all layers of old treatment and reaching upto old plastered surface and applying two coats of OBD over a coat of alkaline resistant primer complete all as specified and directed.

Material and labour for preperation of old decorated brick/concrete, plastered or unplastered surfaces of walls,pillars cornices etc by brooming down with steel wire brushing,scraping down smoke soot , moulds, moss and effloroscent salts, trading oil and greasy spots etc. and applying one coat of white wash as directed by Engr-in-Charge, on the walls pillars,cornicess etc complete all as specified and directed.

Material and labour for preperation of old decorated brick/concrete, plastered or unplastered surfaces of ceiling by brooming down with steel wire brushing,scraping down smoke soot , moulds, moss and effloroscent salts, trading oil and greasy spots etc. and applying one coat of white wash on ceiling complete all as specified and directed.

Material and labour for preperation of old decorated brick/concrete, plastered or unplastered surfaces of ceiling by brooming down with steel wire brushing,scraping down smoke soot , moulds, moss and effloroscent salts, trading oil and greasy spots etc. and applying one coat of OBD on ceiling complete all as specified and directed..

Material and labour for preparing old painted surfaces of walls plastered/unplatered by washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of OBD including chalk whitening as preparatory to distempering complete all as specified and directed.

Material and labour for preparation of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

Material and labour for preparing old decorated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparing old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement including Taking down cement plaster of any description, thickness and in any position including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

Material and Labour for 15mm thick rendering on surface of any description of brick work, concrete surfaces in cement mortar 1:4 finished the surface even and smooth without using extra cement including Taking down cement plaster of any description, thickness and in any position including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

Material and Labour for 10mm thick plaster in CM 1:3 finished even & smooth without using extra cement in patches as in ceilings and the like including Taking down cement plaster of any description, thickness and in any position including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of OBD with hand roller, over a coat of alkaline resistant primer complete all as specified.

Material and labour preparation of new plastered surfaces of walls and applying two coat of exterior emulsion paint over a coat of alkaline resistant primer over a coat of exterior grade putty, complete all as specified and directed. (New colour coding shall be as approved by GE)

Material and labour for preparation of new plastered surfaces of walls and applying two coat of cement base paint complete all as specified and directed.

Material and labour for preparation of new plastered surfaces on ceilings and applying two coats of white washing complete all as specified and directed.

Supply & fixing PVC (SWR) 110 mm pipe type A single socket in any length with rubber ring joints fixed to wall or in floors including Dismantling of Rain water pipes of any description any length including bends etc complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete as all specified and directed.

Material and labour for PCC in 1:3:6 type C-1 (using 20mm graded mechanically crushed stone aggregate) 50 mm thick as in plinth protection, path, laid in alternate bays etc.finished even and smooth without using extra cement and joints filled with bitumen and sand mixture applied hot complete all as specified and directed.

Dismantling of brick work or stone masonary, precast cement concrete walling built in cement mortar including all quoins, arches, pillars etc.,complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks burnt, old size, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), complete all as specified

Material and labour for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Except bricks) complete all as specified and as directed.

Material and Labour for preparation of exposed brick wall surface by cleaning the surface wire brush to remove all dirt/loose materials from the bricks and from the joints between the bricks. Prepared surface should be then washed with diluted HCL acid (dilution ratio of 1:50) for three times in a day for two days. After acid wash surface should be allowed to be air dried for one day. NOTE : - Further treatment over the surface so achieved will be carried out only after approved of the same by GE.

Providing technically qualified person (Engineer) for preparation of PSMB including carrying out of measurement of old Bldgs as per normal Engineer practice falling under the area of AGE B&R-II under GE (South) Ambala Cantt. Also providing necessary documents (e.g stationery items etc.) for preparation of PSMB, entering site measurement of following items in PSMB as per the format kept in Sub Division: - (a) White wash in ceiling surfaces. (b) White wash in wall surfaces. (c) OBD on wall surfaces / dry distemper (d) Interior emulsion (Plastic paint) on wall surfaces. (e) Cement base paint on wall surfaces. (f) Exterior emulsion paint on wall surfaces. (g) Synthetic enamel paint on wooden surfaces. (h) Synthetic enamel paint on steel surfaces. (j) Varnish. (k) Small article paint steel/wooden. This item includes submission of PSMB building wise falling under AOR of AGE B&R-II under GE (South) Ambala duly scrutinized and signed by JE (Civil) and Engineer-in-Charge and Numbered and audited by Audit authorities. NOTES: - 1. The above PSMB shall be prepared by Engineer having minimum qualification diploma in Civil Engineering from approved Technical Institute alongwith minimum work experience of three years. Details of qualification and experience shall be verified and kept on record by Engineer-in-Charge. 2. PSMB shall be submitted by the contractor before submission of 1st RAR of above work complete in all respect duly signed and audited. 3. The contractor shall be paid for Square meter of periodical items worked out in PSMB as per plinth area of particular bldg. 4. Necessary security pass shall be issued by Engineer-in-Charge in favour of Engineer being appointed by the contractor for the purpose on the basis of particular submitted by the contractor in writing alongwith Police Verification with regard to Character and antecedents of the Engineer. 5. Irrespective of above, in few bldg where complete periodical services are not carried out (Only 2 or 3 items are executed) contractor will prepare PSMB for entire bldg covering all items as mentioned above irrespective of item executed by him as per direction of Engineer-in-Charge. 6. In case of repetitive nature of bldgs where work has been executed by the contractor the payment shall be made only for area to be measured at first instant. No repetition of area shall be allowed and taken into consideration for payment purposes.

Shubham Enterprises

Krishan Kumar Goel

M/S Vijay Kumar Sharma

JMB BUILDERS & ASSOCIATES

OJHA ENTERPRISES