CONSTRUCTION OF PROPOSED 100 BEDDED SUB DISTRICT HOSPITAL AT-BILIMORA, TA-GANDEVI, DIST: NAVSARI

NAME OF WORK : CONSTRUCTION OF PROPOSED 100 BEDDED SUB DISTRICT HOSPITAL AT-BILIMORA, TA-GANDEVI, DIST: NAVSARI.

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

1 CIVIL WORK' 6,545.00 Sqm 2.84 Rupees Two and

Clearing and grubbing road land includding uprooting rank vegetation, grass, bushes, shrubs, saplings and Paisa Eighty Four

trees girth upto 300mm removal of stumps of tress cut earlier and disposal of unserviceable materials. Only

A) By Mechanical means in area of light jungle.

2 Excavation for foundation upto 1.5 mt.depth All kind of Soil. including sorting out and stacking of unuseful 7,229.00 Cum 120.01 Rupees One

materials and disposing off the excavated stuff upto any lead and lift.(Excavated earth / Stuff to be stacked Hundred Twenty

and surplus earth disposed at non objectinable place to be found by the Contractor. ) and Paisa One Only

3 Excavation for foundation for 1.5 mt. to 3.0 mt. All kind of Soil. including sorting out and stacking of useful 6,105.00 Cum 133.05 Rupees One

materials and disposing off the excavated stuff upto any lead and lift (Excavated earth / Stuff to be stacked Hundred Thirty Three

and surplus earth disposed at non objectinable place to be found by the Contractor.) and Paisa Five Only

4 Excavation for foundation for 3.0 mt. to 5.0 mt. All kind of Soil. including sorting out and stacking of useful 7,045.00 Cum 146.09 Rupees One

materials and disposing off the excavated stuff upto any lead and lift (Excavated earth / Stuff to be stacked Hundred Forty Six

and surplus earth disposed at non objectinable place to be found by the Contractor.) and Paisa Nine Only

5 Extra for additional depth more than 5.0 m for excavation for foundation including shoring, Strutting, 5,135.00 Cum 167.73 Rupees One

Dewatering sorting out and stacking of useful materials and disposing of the excavated stuff upto any lead Hundred Sixty Seven

and lift (Excavated earth / Stuff to be stacked and surplus earth disposed at non objectinable place to be and Paisa Seventy

found by the Contractor.) Three Only

6 Filling available selected / approved stacked excavated earth (excluding rock) (Earth which is stacked at any 5,154.95 Cum 133.65 Rupees One

location outside the campus non- objectionable place shall be found by the contractor) in trenches, plinth, Hundred Thirty Three

sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by and Paisa Sixty Five

ramming and watering. Only

7 Extra for dewatering up to 1.5mt. depth from G.L. for all Strata 8,637.00 cum 27.27 Rupees Twenty

a) In all sorts of soil and soft murrum Seven and Paisa

Twenty Seven Only

8 Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete. 89.00 Cum 471.69 Rupees Four

Hundred Seventy

One and Paisa Sixty

9 Filling in foundation and plinth, Surrounding Campus, Roads with murrum or selected soil in layers of 20cm. 2,824.74 Cum 296.29 Rupees Two

thickness including watering, ramming and consolidating all lead & Lift etc. complete as directed by Engineer Hundred Ninety Six

Incharge. and Paisa Twenty

10 Providing and laying mix of Lime and Sand of 30% of Lime and 70% of Sand of 150mm thickness etc. including 349.00 Cum 651.45 Rupees Six Hundred

all materials, labours etc. a complete as directed by E.I.C. Fifty One and Paisa

Forty Five Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

11 Providing and laying black trap rubble minimum 200mm size, rubble soling 30 cm thick, in a compact manner, 1,027.00 Cum 1,847.29 Rupees One

foudation, Using 230 to 300 mm and Void filling with GSB at 4mt depth in muddy Soil. Cut size stones, covering Thousand Eight

with a layer of GSB after filling levelling the surface, including watering, ramming well and consolidating each Hundred Forty Seven

layer, as directed. and Paisa Twenty

12 Rolling and consolidation of soling including filling in depression which occur during the process, with power 2,792.46 Sqmt 22.75 Rupees Twenty Two

roler 8 tonne to 12 and Paisa Seventy

tonne. Four Only

13 Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite 3,501.00 Sqm 81.20 Rupees Eighty One

control treatment including labour and material consistment with I.S.I specification. Using Chlordene and and Paisa Twenty

Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent is recommended i.e one litre 20 EC Only

chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre chemical emulsion appication at

the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S

14 Providing and laying cement concrete 1:3:6 (1cement : 3coarse sand : 6 graded stone aggregate 20 mm. 7.00 Cum 3,713.67 Rupees Three

Nominal size) and curing complete excluding cost of form work in :(a) Foundation and plinth Thousand Seven

Hundred Thirteen

and Paisa Sixty Six

15 Providing and laying cement concrete 1:3:6 (1 Cement : 3 coarse sand :6 hand broken stone aggregates 40 187.00 Cum 3,080.90 Rupees Three

mm nominal size) and curing complete excluding cost of form work in. Thousand Eighty

(A) Foundation and plinth and Paisa Ninety

16 Providing and laying cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates 20 m.m. 677.00 Cum 3,713.67 Rupees Three

nominal size) and curing complete including the cost of form work and excluding the rate of reinforcement Thousand Seven

for reinforced cement concrete in: All Floor Hundred Thirteen

and Paisa Sixty

17 Providing and laying plain Cement Mortar 1:4 ( 1- Cement : 4 - Fine Sand ) of average thickness 50 mm for all 382.00 Cum 2,896.97 Rupees Two

leads and lifts including finishing, curing etc. complete. All Floor Thousand Eight

Hundred Ninety Six

and Paisa Ninety

18 Providing laying controlled cement concrete M-200 work with curing complete including the cost of form 58.00 Cum 4,890.42 Rupees Four

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Eight

( A ) Plinth Slab Hundred Ninety and

Paisa Forty Two Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

19 Constructing cast-in situ RCC diaphragm wall by providing and laying machine batched, machine mixed, self compacting, ready 1,277.00 Cum 12,854.27 Rupees Twelve

mix reinforced cement concrete, tramie controlled, of M 30 grade concrete as per approved Design Mix manufactured in fully Thousand Eight

automatic batching plant established on site and transported to site of work in transit mixer having continuous agitated mixer

Hundred Fifty Four

including providing and mixing required admixtures in recommended proportions as per IS : 9103, as approved by the Engineer-in-

charge, for achieving 150- 200mm slump, for diaphragm wall having thickness as per approved structural design not exceeding and Paisa Twenty

600 mm, in pannels of required depth and lengths as per approved drawing, including constructing necessary guide walls as Seven Only

required and as specified including boring in all kinds of soils and rocks, including working in or under water and / or liquid mud, in

foul conditions and pumping or bailing out of water and removing slush, including disposal of earth/ rock / slush etc. for all leads

and all lifts, including preparing, providing and re-circulating bentonite slurry in the trench as and when required for all depths,

including agitating bentonite slurry during trenching etc., providing and fixing stop ends or form tubes, upto the required depth of

diaphragm wall including extracting the same after casting, including chipping off the bentonite adulterated concrete or unsound

concrete up to the cut off level for obtaining the sound concrete, dressing undulations on the exposed face of diaphragm wall

after excavation by chipping / chiseling etc. including filling the depression/ cavities with sound concrete etc. complete and as

directed by the Engineer-in-charge, including providing recess for bearing plates and fixing insert boxes for inclined rock anchors

etc. complete as per the specifications and approved design and as directed by the Engineer-in-charge, including the cost of

inserts and Excluding of Reinforcement steel. (rates include cost of all inputs of labour, material and T & P, cost of handling, lifting &

placing in position the reinforcement cage in the trench, including the additional cost of welding the reinforcement bars etc.

involved in the work and all other incidental expenditure for completing the work as directed by the Engineer-in-charge),

However, the actual area of the diaphragm wall, correct to two places of decimal, from design bottom level to the design cut off

level (including portion anchored in the rock upto the design bottom level) only shall be measured for payment.

Excess/less cement used for design mix including the extra cement required for under water concreting is payable / recoverable

20 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 3,231.83 Cum 4,376.33 Rupees Four

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Three

( A ) Foundations footings Base of columns and mass concrete. Hundred Seventy Six

and Paisa Thirty

21 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 232.00 Cum 5,827.70 Rupees Five

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Eight

(D ) Columns, pillars posts and struts square, rectangular, polygonal Hundred Twenty

Upto Plinth Seven and Paisa

22 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 208.00 Cum 6,398.35 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Three

(D ) Columns, pillars posts and struts square, rectangular, polygonal in plan Hundred Ninety Eight

Ground Floor and Paisa Thirty Five

23 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 184.18 Cum 6,438.88 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Four

First Floor Hundred Thirty Eight

(D ) Columns, pillars posts and struts square, rectangular, polygonal in plan and Paisa Eighty

24 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 158.00 Cum 6,479.41 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Four

Second Floor Hundred Seventy

(D ) Columns, pillars posts and struts square, rectangular, polygonal in plan Nine and Paisa Forty

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

25 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 158.00 Cum 6,519.94 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Five

Third Floor Hundred Nineteen

(D ) Columns, pillars posts and struts square, rectangular, polygonal in plan and Paisa Ninety

26 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 156.00 Cum 6,560.48 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Five

Fourth Floor Hundred Sixty and

(D ) Columns, pillars posts and struts square, rectangular, polygonal in plan Paisa Forty Eight

27 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 70.00 Cum 6,601.01 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Six

Fifth Floor (Terrace Floor ) Hundred One and

(D ) Columns, pillars posts and struts square, rectangular, polygonal in plan Paisa One Only

28 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 17.00 Cum 6,641.54 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Six

Sixth Floor (Lift Floor ) Hundred Forty One

(D ) Columns, pillars posts and struts square, rectangular, polygonal in plan and Paisa Fifty Four

29 Providing laying controlled cement concrete M-250 work with curing complete including the cost of all type 83.00 Cum 6,870.02 Rupees Six

of form work as per required and excluding the rate of reinforcement for reinforced concrete work in. Thousand Eight

Basement Floor Hundred Seventy

(H ) Wall /Shear wall/ Drop Pardi and Paisa Two Only

30 Providing laying controlled cement concrete M-250 work with curing complete including the cost of all type 87.30 Cum 6,870.02 Rupees Six

of form work as per required and excluding the rate of reinforcement for reinforced concrete work in. Thousand Eight

Ground Floor Hundred Seventy

(H ) Wall /Shear wall/ Drop Pardi and Paisa Two Only

31 Providing laying controlled cement concrete M-250 work with curing complete including the all type of form 75.00 Cum 6,910.55 Rupees Six

work as per required and excluding the rate of reinforcement for reinforced concrete work in. Thousand Nine

First Floor Hundred Ten and

(H ) Wall /Shear wall/ Drop Pardi Paisa Fifty Five Only

32 Providing laying controlled cement concrete M-250 work with curing complete including the all type of form 74.00 Cum 6,951.08 Rupees Six

work as per required and excluding the rate of reinforcement for reinforced concrete work in. Thousand Nine

Second Floor Hundred Fifty One

(H ) Wall /Shear wall/ Drop Pardi and Paisa Eight Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

33 Providing laying controlled cement concrete M-250 work with curing complete including the all type of form 73.00 Cum 6,991.61 Rupees Six

work as per required and excluding the rate of reinforcement for reinforced concrete work in. Thousand Nine

Third Floor Hundred Ninety One

(H ) Wall /Shear wall/ Drop Pardi and Paisa Sixty One

34 Providing laying controlled cement concrete M-250 work with curing complete including the all type of form 72.00 Cum 7,032.15 Rupees Seven

work as per required and excluding the rate of reinforcement for reinforced concrete work in. Thousand Thirty Two

Fourth Floor and Paisa Fifteen

(H ) Wall /Shear wall/ Drop Pardi Only

35 Providing laying controlled cement concrete M-250 work with curing complete including the all type of form 55.00 Cum 7,072.68 Rupees Seven

work as per required and excluding the rate of reinforcement for reinforced concrete work in. Thousand Seventy

Fifth Floor (Terrace Floor ) Two and Paisa Sixty

(H ) Wall /Shear wall/ Drop Pardi Eight Only

36 Providing laying controlled cement concrete M-250 work with curing complete including the all type of form 28.00 Cum 7,113.21 Rupees Seven

work as per required and excluding the rate of reinforcement for reinforced concrete work in. Thousand One

Sixth Floor (Lift Floor ) Hundred Thirteen

(H ) Wall /Shear wall/ Drop Pardi and Paisa Twenty

37 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 95.00 Cum 5,921.63 Rupees Five

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Nine

(C) Ground/Plinth Beam Hundred Twenty

One and Paisa Sixty

38 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 324.00 Cum 6,255.94 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Two

(C) RCC Floor Beam Hundred Fifty Five

i) Basement Floor and Paisa Ninety

39 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 350.10 Cum 6,255.94 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Two

(C) RCC Floor Beam Hundred Fifty Five

i) Ground FLoor and Paisa Ninety

40 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 368.00 Cum 6,296.47 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Two

(C) RCC Floor Beam Hundred Ninety Six

i) First FLoor and Paisa Forty

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

41 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 346.00 Cum 6,337.00 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Three

(C) RCC Floor Beam Hundred Thirty Seven

i) Second FLoor and Zero Paisa Only

42 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 249.00 Cum 6,377.53 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Three

(C) RCC Floor Beam Hundred Seventy

i) Third FLoor Seven and Paisa Fifty

43 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 245.00 Cum 6,418.07 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Four

(C) RCC Floor Beam Hundred Eighteen

i) Fourth FLoor and Paisa Seven

44 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 93.00 Cum 6,458.60 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Four

(C) RCC Floor Beam Hundred Fifty Eight

i) Fifth FLoor (Terrace Floor ) and Paisa Sixty Only

45 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 7.00 Cum 6,499.13 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Four

(C) RCC Floor Beam Hundred Ninety Nine

i) Sixth FLoor (Lift Floor ) and Paisa Thirteen

46 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 53.20 Cum 6,901.33 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Nine

Ground Floor Hundred One and

(C) RCC Lintel, Sill, Coping and Mullians Bands Paisa Thirty Three

i) Ground Floor Only

47 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 46.40 Cum 6,941.86 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Nine

(C) RCC Lintel, Sill, Coping and Mullians Bands Hundred Forty One

i) First Floor and Paisa Eighty Six

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

48 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 40.00 Cum 6,982.39 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Nine

(C) RCC Lintel, sill,Coping and Mullians Bands Hundred Eighty Two

i) Second Floor and Paisa Thirty Nine

49 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 40.00 Cum 7,022.92 Rupees Seven

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Twenty

(C) RCC Lintel, sill,Coping and Mullians Bands Two and Paisa

i) Third Floor Ninety Two Only

50 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 41.00 Cum 7,063.46 Rupees Seven

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Sixty Three

(C) RCC Lintel, sill and Mullians Bands and Paisa Forty Six

i) Fourth Floor Only

51 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 17.00 Cum 7,103.99 Rupees Seven

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand One

(C) RCC Lintel, sill,Coping and Mullians Bands Hundred Three and

i) Fifth Floor (Terrac Floor ) Paisa Ninety Nine

52 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 2.00 Cum 7,144.52 Rupees Seven

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand One

(C) RCC Lintel, sill,Coping and Mullians Bands Hundred Forty Four

i) Sixth Floor (Lift Room ) and Paisa Fifty Two

53 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 50.69 Cum 5,837.80 Rupees Five

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Eight

Ground Floor Hundred Thirty Seven

( G ) Chhajja and Paisa Eighty

54 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 47.00 Cum 5,878.33 Rupees Five

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Eight

First Floor Hundred Seventy

( G ) Chhajja Eight and Paisa Thirty

55 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 42.00 Cum 5,918.86 Rupees Five

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Nine

Second Floor Hundred Eighteen

( G ) Chhajja and Paisa Eighty Six

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

56 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 41.00 Cum 5,959.39 Rupees Five

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Nine

Third Floor Hundred Fifty Nine

( G ) Chhajja and Paisa Thirty Nine

57 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 41.00 Cum 5,999.93 Rupees Five

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Nine

Fourth Floor Hundred Ninety Nine

( G ) Chhajja and Paisa Ninety

58 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 50.00 Cum 6,040.46 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Forty and

Fifth Floor Paisa Forty Six Only

( G ) Chhajja (Terrace Floor )

59 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 11.00 Cum 6,080.99 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Eighty

Sixth Floor and Paisa Ninety

( G ) Chhajja (Lift Room ) Nine Only

60 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 644.00 Cum 6,313.51 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Three

( B ) Slabs, landing, shelvas, Balconies etc Hundred Thirteen

i) Basement Floor and Paisa Fifty One

61 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 286.90 Cum 6,313.51 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Three

( B ) Slabs, landing, shelvas, Balconies etc Hundred Thirteen

i) Ground Floor and Paisa Fifty One

62 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 285.00 Cum 6,354.04 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Three

( B ) Slabs, landing, shelvas, Balconies etc Hundred Fifty Four

i) First Floor and Paisa Four Only

63 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 285.00 Cum 6,394.57 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Three

( B ) Slabs, landing, shelvas, Balconies etc Hundred Ninety Four

i) Second Floor and Paisa Fifty Seven

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

64 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 256.00 Cum 6,435.10 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Four

( B ) Slabs, landing, shelvas, Balconies etc Hundred Thirty Five

i) Third Floor and Paisa Ten Only

65 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 279.00 Cum 6,475.64 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Four

( B ) Slabs, landing, shelvas, Balconies etc Hundred Seventy

i) Fourth Floor Five and Paisa Sixty

66 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 222.00 Cum 6,516.17 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Five

( B ) Slabs, landing, shelvas, Balconies etc Hundred Sixteen and

i) Fifth Floor Paisa Seventeen

67 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 14.00 Cum 6,556.70 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Five

( B ) Slabs, landing, shelvas, Balconies etc Hundred Fifty Six and

i)Sixth Floor (Terrace Floor ) (Lift Room ) Paisa Seventy Only

68 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 15.00 Cum 6,961.93 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Nine

(C) RCC Stair Case Hundred Sixty One

i) Basement and Paisa Ninety

69 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 23.00 Cum 6,961.93 Rupees Six

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Nine

(C) RCC Stair Case Hundred Sixty One

i) Ground Floor and Paisa Ninety

70 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 20.00 Cum 7,002.46 Rupees Seven

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Two and

(C) RCC Stair Case Paisa Forty Six Only

71 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 15.00 Cum 7,042.99 Rupees Seven

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Forty Two

(C) RCC Stair Case and Paisa Ninety

i) Second Floor Nine Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

72 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 15.00 Cum 7,083.52 Rupees Seven

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand Eighty

(C) RCC Stair Case Three and Paisa Fifty

i) Third Floor Two Only

73 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 15.00 Cum 7,124.06 Rupees Seven

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand One

(C) RCC Stair Case Hundred Twenty Four

i) Fourth Floor and Paisa Six Only

74 Providing laying controlled cement concrete M-250 work with curing complete including the cost of form 15.00 Cum 7,164.59 Rupees Seven

work and excluding the rate of reinforcement for reinforced concrete work in. Thousand One

(C) RCC Stair Case Hundred Sixty Four

i) Fifth Floor and Paisa Fifty Nine

75 Providing & casting in situ C.C. in GRADE M-30 Propertion of ingredient as per mix design by batching using 69.00 Cum 9,444.95 Rupees Nine

aggregate of size 12 to 20 & 6 to 12mm including scaffolding centering form work needle vibrated Thousand Four

consolidation curing and hydraulic testing etc. completed (excluding cost of reinforcement and neat finishing) Hundred Forty Four

upto 6 Mt. height/deapth from average ground level. and Paisa Ninety

Bottom slab/ Floor Slab with shuttering Five Only

76 Providing & casting in situ C.C. in GRADE M-30 Propertion of ingredient as per mix design by batching using 54.00 Cum 10,059.05 Rupees Ten

aggregate of size 12 to 20 & 6 to 12mm including scaffolding centering form work needle vibrated Thousand Fifty Nine

consolidation curing and hydraulic testing etc. completed (excluding cost of reinforcement and neat finishing) and Paisa Five Only

upto 6 Mt. height/deapth from average ground level.

77 Providing & casting in situ C.C. in GRADE M-30 Propertion of ingredient as per mix design by batching using 7.00 Cum 9,758.90 Rupees Nine

aggregate of size 12 to 20 & 6 to 12mm including scaffolding centering form work needle vibrated Thousand Seven

consolidation curing and hydraulic testing etc. completed (excluding cost of reinforcement and neat finishing) Hundred Fifty Eight

upto 6 Mt. and Paisa Ninety

Beam/Ring Beam Only

78 Providing & casting in situ C.C. in GRADE M-30 Propertion of ingredient as per mix design by batching using 3.30 Cum 10,714.55 Rupees Ten

aggregate of size 12 to 20 & 6 to 12mm including scaffolding centering form work needle vibrated Thousand Seven

consolidation curing and hydraulic testing etc. completed (excluding cost of reinforcement and neat finishing) Hundred Fourteen

upto 6 Mt. and Paisa Fifty Five

79 Providing TMT Bar FE 500/500 D reinforcement for R.C.C. work including bending, binding and placing in 14,12,087.97 Kg 78.51 Rupees Seventy

position complete. Eight and Paisa Fifty

All Floor One Only

80 Supplying cutting,bending,binding and placing in position steel as per plan and design and as rer ISS 2502 9.90 MT 90,363.55 Rupees Ninety

including cost of Steel and binding Wire for reservoir/structure only including lift up to 6 meter height or depth Thousand Three

below G.L for all diameter. Hundred Sixty Three

CRS Steel Fe – 500 /500 Dgrade for all diameters. and Paisa Fifty Five

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

81 Providing and erecting False Staging with MS props or MS H-frames for each additional height of propping and 100.00 Sqm 400.10 Rupees Four

centering where the height of propping and centering exceeds 4.0 meter between supporting floor to ceiling Hundred and Paisa

supporting as required with adequate bracing/ propping with steel props/ H frames etc. as directed by EIC Ten Only

including cost of de-shuttering and centering at all levels / all floors for plumbing electrical and civil works.

Note : Plan area will be measured Height upto 12.0 M

82 Providing and position PVC Sleeves in RCC elements like walls slabs beams etc. of 6 Kg/cm2 UPVC Pipes and 225.00 Each 42.42 Rupees Forty Two

diameter of taking out service pipelines cables road infrasturcture work etc. upto 0.5 mtr. length for all floors/ and Paisa Forty Two

all levels / all heights. Only

83 b) 75mm dia. 220.00 Each 65.65 Rupees Sixty Five

and Paisa Sixty Five

84 c) 110mm dia. 165.00 Each 124.23 Rupees One

Hundred Twenty Four

85 Brick work using Common burnt clay building bricks having crushing strength not less than 35 kg./sq.cm. in 25.00 Cum 4,599.20 Rupees Four

cement mortar 1: 5 (1 cement : 5 fine sand) in true line and level including curing, scaffolding, racking out the Thousand Five

joints etc. complete as directed by engineer in charge. Hundred Ninety Nine

(B) Fly Ash Bricks and Paisa Twenty

For all Floor lead & lift. Only

86 Brick work using Common burnt clay building bricks having crushing strength not less than 35 kg./sq.cm. in 508.00 Cum 4,121.55 Rupees Four

foundation and plinth in cement mortar 1: 6 (1 cement : 6 fine sand) in true line and level including curing, Thousand One

scaffolding, racking out the joints etc. complete as directed by engineer in charge. Hundred Twenty

Plinth Masonry One and Paisa Fifty

(B) Conventional Five Only

87 Brick work using Common burnt clay building bricks having crushing strength not less than 35 kg./sq.cm. in 72.00 Cum 4,403.40 Rupees Four

superstructure above plinth level upto floor two level in cement mortar 1: 6 (1 cement : 6 fine sand) Thousand Four

(B ) Conventional Hundred Three and

Ground floor Paisa Thirty Nine Only

88 Brick work using Common burnt clay building bricks having crushing strength not less than 35 kg./sq.cm. in 4.80 Cum 4,444.90 Rupees Four

superstructure above plinth level upto floor two level in cement mortar 1: 6 (1 cement : 6 fine sand) Thousand Four

(B ) Conventional Hundred Forty Four

First floor and Paisa Eighty

89 Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in 29.00 Sqmt 656.34 Rupees Six Hundred

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in superstructure above floor two level (B) Conventional Fifty Six and Paisa

up to floor two level. Thirty Three Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

90 Providing and laying autoclave aerated concrete blocks as per drawing in single or multiple layers with Ready 56.00 Cum 4,642.97 Rupees Four

mix joining mortar. Crushing strength of aerated concrete block shall not be less than 40 KG/sqcm, minimum Thousand Six

density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity shall not exceed 0.30 w/mk, Hundred Forty Two

fire resistant 4 hours, in true line level and plumb and cleaning the surface with necessary tool tackles The and Paisa Ninety

drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks and 0.10 percent for Grade 2 blocks Seven Only

when tested in accordance with IS : 6641 (Part-2)-1972 etc. at any heights, all depths, any levels (in foundation

and superstructure) and all places including curing, scaffolding, racking / flush jointing etc complete, as per

drawing / specification and approved by architect and as directed by Engineer Incharge for all civil,

plumbing, electrical & infrastructure work.

a) Basement FLoor

91 Providing and laying autoclave aerated concrete blocks as per drawing in single or multiple layers with Ready 669.00 Cum 4,642.97 Rupees Four

mix joining mortar. Crushing strength of aerated concrete block shall not be less than 40 KG/sqcm, minimum Thousand Six

density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity shall not exceed 0.30 w/mk, Hundred Forty Two

fire resistant 4 hours, in true line level and plumb and cleaning the surface with necessary tool tackles The and Paisa Ninety

drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks and 0.10 percent for Grade 2 blocks Seven Only

when tested in accordance with IS : 6641 (Part-2)-1972 etc. at any heights, all depths, any levels (in foundation

and superstructure) and all places including curing, scaffolding, racking / flush jointing etc complete, as per

drawing / specification and approved by architect and as directed by Engineer Incharge for all civil,

plumbing, electrical & infrastructure work.

92 Providing and laying autoclave aerated concrete blocks as per drawing in single or multiple layers with Ready 613.00 Cum 4,684.16 Rupees Four

mix joining mortar. Crushing strength of aerated concrete block shall not be less than 40 KG/sqcm, minimum Thousand Six

density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity shall not exceed 0.30 w/mk, Hundred Eighty Four

fire resistant 4 hours, in true line level and plumb and cleaning the surface with necessary tool tackles The and Paisa Sixteen

drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks and 0.10 percent for Grade 2 blocks Only

when tested in accordance with IS : 6641 (Part-2)-1972 etc. at any heights, all depths, any levels (in foundation

and superstructure) and all places including curing, scaffolding, racking / flush jointing etc complete, as per

drawing / specification and approved by architect and as directed by Engineer Incharge for all civil,

plumbing, electrical & infrastructure work.

93 Providing and laying autoclave aerated concrete blocks as per drawing in single or multiple layers with Ready 446.00 Cum 4,725.35 Rupees Four

mix joining mortar. Crushing strength of aerated concrete block shall not be less than 40 KG/sqcm, minimum Thousand Seven

density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity shall not exceed 0.30 w/mk, Hundred Twenty Five

fire resistant 4 hours, in true line level and plumb and cleaning the surface with necessary tool tackles The and Paisa Thirty Five

drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks and 0.10 percent for Grade 2 blocks Only

when tested in accordance with IS : 6641 (Part-2)-1972 etc. at any heights, all depths, any levels (in foundation

and superstructure) and all places including curing, scaffolding, racking / flush jointing etc complete, as per

drawing / specification and approved by architect and as directed by Engineer Incharge for all civil,

plumbing, electrical & infrastructure work.

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

94 Providing and laying autoclave aerated concrete blocks as per drawing in single or multiple layers with Ready 396.00 cum 4,766.53 Rupees Four

mix joining mortar. Crushing strength of aerated concrete block shall not be less than 40 KG/sqcm, minimum Thousand Seven

density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity shall not exceed 0.30 w/mk, Hundred Sixty Six

fire resistant 4 hours, in true line level and plumb and cleaning the surface with necessary tool tackles The and Paisa Fifty Three

drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks and 0.10 percent for Grade 2 blocks Only

when tested in accordance with IS : 6641 (Part-2)-1972 etc. at any heights, all depths, any levels (in foundation

and superstructure) and all places including curing, scaffolding, racking / flush jointing etc complete, as per

drawing / specification and approved by architect and as directed by Engineer Incharge for all civil,

plumbing, electrical & infrastructure work.

95 Providing and laying autoclave aerated concrete blocks as per drawing in single or multiple layers with Ready 351.00 Cum 4,807.72 Rupees Four

mix joining mortar. Crushing strength of aerated concrete block shall not be less than 40 KG/sqcm, minimum Thousand Eight

density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity shall not exceed 0.30 w/mk, Hundred Seven and

fire resistant 4 hours, in true line level and plumb and cleaning the surface with necessary tool tackles The Paisa Seventy Two

drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks and 0.10 percent for Grade 2 blocks Only

when tested in accordance with IS : 6641 (Part-2)-1972 etc. at any heights, all depths, any levels (in foundation

and superstructure) and all places including curing, scaffolding, racking / flush jointing etc complete, as per

drawing / specification and approved by architect and as directed by Engineer Incharge for all civil,

plumbing, electrical & infrastructure work.

96 Providing and laying autoclave aerated concrete blocks as per drawing in single or multiple layers with Ready 218.00 Cum 4,848.91 Rupees Four

mix joining mortar. Crushing strength of aerated concrete block shall not be less than 40 KG/sqcm, minimum Thousand Eight

density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity shall not exceed 0.30 w/mk, Hundred Forty Eight

fire resistant 4 hours, in true line level and plumb and cleaning the surface with necessary tool tackles The and Paisa Ninety

drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks and 0.10 percent for Grade 2 blocks One Only

when tested in accordance with IS : 6641 (Part-2)-1972 etc. at any heights, all depths, any levels (in foundation

and superstructure) and all places including curing, scaffolding, racking / flush jointing etc complete, as per

drawing / specification and approved by architect and as directed by Engineer Incharge for all civil,

plumbing, electrical & infrastructure work.

Fifth Floor (Terrace Floor )

97 Providing and laying autoclave aerated concrete blocks as per drawing in single or multiple layers with Ready 71.00 Cum 4,890.10 Rupees Four

mix joining mortar. Crushing strength of aerated concrete block shall not be less than 40 KG/sqcm, minimum Thousand Eight

density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity shall not exceed 0.30 w/mk, Hundred Ninety and

fire resistant 4 hours, in true line level and plumb and cleaning the surface with necessary tool tackles The Paisa Ten Only

drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks and 0.10 percent for Grade 2 blocks

when tested in accordance with IS : 6641 (Part-2)-1972 etc. at any heights, all depths, any levels (in foundation

and superstructure) and all places including curing, scaffolding, racking / flush jointing etc complete, as per

drawing / specification and approved by architect and as directed by Engineer Incharge for all civil,

plumbing, electrical & infrastructure work.

Sixth Floor (Lift Floor )

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

98 Providing and fixing stainless steel ( Grade 304) for railing, Daso, bump rail, pendant, ladder, guard rail, grating, 4,832.00 Kg 489.85 Rupees Four

corner guard etc. made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing Hundred Eighty Nine

and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts and Paisa Eighty Five

complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts Only

etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval

of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts, fasteners etc.) Rate includes for all lead & lift & as per

directed by EIC.

99 Providing, supplying and fixing in position Hollow pressed steel door frame of 105 x 60 x 1.2 mm profile 6.00 Rmt 402.99 Rupees Four

fabrication with frame of 1.2 mm galvanised M.S. sheet. It shall generally confirm to IS 4351/03 with suitaable Hundred Two and

1/2 rebates for fixing shutter. Each frame shall contain S.S. hinges of size 100 x 2.5 mm thick. Each frame shall Paisa Ninety Nine

contain hinges as above with jamb base, tie with channel thresold, flat for fixing hinges and motorguard with Only

arrangement for fixing hardware like Aldrop, tadi, handle, etc. complete with one coat of zinc chromate

redodaxide primer etc. complete as per detailed.

100 Providing and fixing 35mm thick flush door shutters, solid core construction with first class teak wood with cross 5.00 Sqmt 3,362.29 Rupees Three

board and face veneer or plywood face panels with 1.0 mm thick laminate on both sides including providing Thousand Three

and fixing all stainless steel fixtures and fastening like hinges, handle, door latch, tower bolt, door Hundred Sixty Two

stopper,peephole etc. of approved quality etc. complete. and Paisa Twenty

101 Providing and fixing M.S. grill (using Bright finish Round,Flats & Bar etc.) of required pattern top of windows etc. 30,970.00 Kg 111.10 Rupees One

with M.S. flats at required spacing and frame alround square or round headed bolts and nuts or by Hundred Eleven and

screws.including applying a priming coat of red lead paint and two coats of oil painting etc complete, as per Paisa Ten Only

architectural drawings and the directions of Engineer-in-charge.

(A) Plain grill

102 Designing, Providing and fixing 35 mm thick Decorative type Water proof flush door Double leaf shutters with 2 68.65 Sqm 5,320.68 Rupees Five

nos of Vision panel of size 300 x 700 mm solid core construction with frame of Aluminium (for approved Make) Thousand Three

section & 8mm thick fixed glass on top portion and ply-wood face panels, 1.0 mm thick laminate on both Hundred Twenty

sides including Stainless steel fixtures and fastening and SS handle including primer coat of approved quality and Paisa Sixty Eight

and two coats of oil painting of door bedding patti etc complete, as per architectural drawings and the Only

directions of Engineer-in-charge.

103 Designing, Providing and fixing 35 mm thick Decorative type Water proof flush door Double leaf shutters with 1 14.00 sqm 5,501.47 Rupees Five

nos of Vision panel of size 300 x 700 mm solid core construction with frame of Aluminium section & 8mm thick Thousand Five

fixed glass on top portion and ply-wood face panels, 1.0 mm thick laminate on both sides including Stainless Hundred One and

steel fixtures and fastening and SS handle including primer coat of approved quality and two coats of oil Paisa Forty Seven

painting of door bedding patti etc complete, as per architectural drawings and the directions of Engineer-in- Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

104 Designing, Providing and fixing of approved make radiation proof lead line door with galvanised steel. Recommended lead door 8.00 Sqm 25,187.38 Rupees Twenty Five

design should be sandwich type panel with both side GI Sheet with minimum 2mm Lead infill. Doors should be finished in Powder Thousand One

Coating with film thickness of 60 microns approx. in desired RAL Shades. The manufacturer company must b ISO 9001-2015 certified

-ACODOR (Koleshvari Infra) Make . Door frame is Single rebate profile of minimum size 120mm X 57 mm made out of 1.6 mm

minimum thick galvanized steel sheet & with 2mm lead infill. 120x57 Frames shall be Mitred jointed and field assembled with inbuild Seven and Paisa

groove gasket. The frames is finished with Powder Coating in desired RAL Shade. Frame having provisions and necessary Thirty Eight Only

reinforcement for receiving appropriate hardware like lock and hinges. Frames will be provided with back plate bracket to

receive anchor fasteners for installation on a finished plastered wall opening. Frames shall be mitred and field assembled with self

tabs. Frames to have inbuild grooved sealing system and shall be site fitted with Silicon gasket as standard. All provision should be

mortised, drilled and tapped for receiving appropriate hardware. Door leaf shall be minimum 46mm thick fully flush double skin

door with or without vision lite. Door leaf shall be manufactured from 1.0 mm thick galvanised steel sheet. The internal construction

of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be honey Comb craft

paper & 2mm lead sheet. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary

reinforcement . The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on

the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per manufacturers

recommendation and desired to be fixed with lead line glass as DGU unit ( charges extra as per size of vision panel).Hinges SS - BB -

4 X 3 X 3 acodor / D type Pull Handle - SS 304 - 300 mm acodor / Dead lock with cylinder - 70mm both side key / Flush type tower

bolt / Auto Drop Seal Concealed / Door Seal / Door Closer - Geze make / Kick plate - ss 304- 300 mm height / Stacher plate - ss

/ Anchor bolt with cap Approved make : ACODOR, Koleshvari , Kira or equivalent

105 Designing, Providing and fixing alluminium colour anodized Double leaf Partly Panel & Partly Glazed shutters 231.00 Sqm 2,583.58 Rupees Two

door having standared extruded alluminium colour anodized door lock rail of alluminium section size 200.0 x Thousand Five

44.45 x 3.00 mm (approximate wt 3.894 kg per rmt)and top rail & vertical memberof alluminium section size Hundred Eighty

114.30 x 44.45 x 2.15 mm (approximate wt 1.836 kg per rmt) and bottom rail per door of size 150.00 x 44.45 x 2.20 Three and Paisa Fifty

mm( aproximate wt 2.376 kg per rmt) 8 mm Thick fixed Glass on top and 8 mm thick coloured flot glass and Eight Only

providing rubber gasket and glazing clips around the glass and 12mm thick compact laminated sheet or hard

board including providing locks handels door closer including all labour and equipments etc complete.

106 Designing, Providing and fixing of 60 micron powder coated Metal Fire door from ISO 9001:2015 certified Manufacturer . The door 123.00 sqm 18,745.60 Rupees Eighteen

must have been manufactured with galvanized - GI sheet of GPSP Grade as per IS 277. All Fire doors must satisfy the requirement of Thousand Seven

latest NBC 2016 Part 4 for Fire & Life Safety guidelines for 120 minutes Fire Rating with minimum 20 minutes Insulation properties

Hundred Forty Five

along with its Stability & Integrity for 120 minutes. The Prototype sample of the door must carry a prior test evidence as per IS

part-2 / BS 476 Part 20 &22 . The manufacturer must submit the copy of test evidence prior to start of production .The offered test and Paisa Sixty Only

certificate should either carries it's Validity or certificate must not be older than 5 years from CBRI / NABL Accreditated Lab.

Recommended fire door must also be certified by a third party evaluation program from approved International agency. All doors

should be finished with Powder coating in desired regular RAL Shades. Door frame shall be Single rebate profile of section 100 x

mm made out of 1.20mm thick galvanized steel sheet with a factory pre-punched groove so as to accommodate Fire & smoke

seal size 10x4mm . Frames should be butt jointed and field assembled with bolting system for proper strength .Frames should be

provided with back plate for anchor fasteners for installation on a finished plastered wall opening. Door leaf should be minimum

46mm thick fully flush double skin door. Door leaf must be manufactured from 0.8mm (22 gauge) thick galvanized steel sheet. The

door should be provided with reinforcement pads to receiving appropriate Hardware. The Shutter shall be filled with proprietary

infill material . For Double leaf doors; astragal has to be provided on meeting stile for both active and inactive leaf. Vision panels

wherever required should be of 120 minutes fire rating and should be of non-wired type.

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

107 Designing, Providing and fixing 35 mm thick Decorative type Water proof flush door Single leaf shutters with 422.00 Sqm 5,679.23 Rupees Five

solid core construction with frame of Aluminium section & 8mm thick fixed glass on top portion and ply-wood Thousand Six

face panels, 1.0 mm thick laminate on both sides including Stainless steel fixtures and fastening and SS handle Hundred Seventy

including primer coat of approved quality and two coats of oil painting of door bedding patti etc complete, Nine and Paisa

as per architectural drawings and the directions of Engineer-in-charge. Twenty Three Only

108 Designing, Providing and fixing 35 mm thick Decorative type Water proof flush door Single leaf shutters solid 84.00 Sqm 5,175.24 Rupees Five

core construction with frame of Aluminium section & 8mm thick fixed glass on top portion and ply-wood Thousand One

face panels, 1.0 mm thick laminate on both sides including Stainless steel fixtures and fastening and SS handle Hundred Seventy

including primer coat of approved quality and two coats of oil painting of door bedding patti etc complete, Five and Paisa

as per architectural drawings and the directions of Engineer-in-charge. Twenty Four Only

109 Designing, Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid 900.00 Rmt 563.20 Rupees Five

door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- Hundred Sixty Three

60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non and Paisa Twenty

toxic additives (maximum oxicity index of 12 for 100 gms) fabricated with miter joints after star headed SS Only

screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N

(Edge),minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread

of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire

retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as

per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note:

For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be

acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this

account shall be made. applying PVC solvent cement and screwed with full body threadedComplete as per

direction of Engineer-in-Charge.

1) Frame size 45 x 70 mm

110 Designing, Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid 237.00 Sqm 3,468.23 Rupees Three

Decorative flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), Thousand Four

calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives Hundred Sixty Eight

(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal and Paisa Twenty

strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 Three Only

N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,

water/moisture proof and fire retardant and including stainless steel butt hinges of required size with necessary

full body threaded star headed counter sunk S.S screws, Handles, Stopper, Door closer, Tower bolt all as per

direction of Engineer-In- Charge.separately) 1) 30 mm thick

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

111 Designing, Providing and fixing of approved make Single Leaf Hermeticcally Sealed Door (Auto Sliding) etc 53.00 Sqm 35,350.00 Rupees Thirty Five

complete, as per architectural drawings and the directions of Engineer-in-charge. Thousand Three

D3 & D6 Hundred Fifty and

Zero Paisa Only

112 Providing and fixing metal door made of metal sheet and 20 x 30 mm M.S. box section and 50 x 50 mm M.S.Box 16.00 Sqm 6,290.28 Rupees Six

section with fixed G.I. box frame including primer coat of approved quality and two coats of oil painting as per Thousand Two

Architect Drawing and incharge Engineer. Hundred Ninety and

Double Leaf M.S. Metal Door Paisa Twenty Eight

113 Providing & fixing window having extruded aluminum Colour Anodized Matt Finished section frame main 613.40 Sqm 1,583.95 Rupees One

outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track Thousand Five

member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size Hundred Eighty

92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal Three and Paisa

member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size Ninety Five Only

40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt. of 0.456 Kg/mt ) with 6 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc for window and including Mosquito Shutter conststing of S.S.wire gage of

avaerage width aperature 1.4 mm with wire of dia meter 0 .63mm necessary cutting and making good etc.

114 Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 63.50 x 5.00 Sqm 1,713.70 Rupees One

38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of Thousand Seven

0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of Hundred Thirteen

horizontal member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of size 40mm x 18mm x and Paisa Sixty Nine

1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick transparent bronze colour tinted float glass with Only

powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details

etc complete for window.

115 Providing and fixing extruded aluminum window having extruded aluminum Colour Anodized Matt Finished 80.00 Sqm 2,140.33 Rupees Two

section frame main outer size 127mm x 38.10mm x 1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track member size Thousand One

122.20mm x 31.75mm x 1.10mm @ Wt. 1.205 Kg/mt,vertical member of size 122.20mm x 31.75mm x 1.50mm ,@ Hundred Forty and

Wt. 1.398 Kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm @ wt.of Paisa Thirty Three

0.456Kg/mt,vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with 5 mm thick transparent Only

bronze colour tinted float glass with Colour Anodized Matt Finished aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc complete for window including Mosquito

Shutter conststing of S.S.wire gage of avaerage width aperature 1.4 mm with wire of dia meter 0 .63mm

necessary cutting and making good etc. for window.

116 Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / 409.00 Sqm 1,525.00 Rupees One

Rmt with colour anodized alluminium frame with 5 mm thick transparent bronze colour tinted float glass as Thousand Five

details etc complete for Fix window. Hundred Twenty Five

and Zero Paisa Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

117 Providing and fixing standard extruded of alluminium section of size 63 mm x 38.10 mm x 1.2 mm ( of Jindal 115.00 Sqm 1,175.56 Rupees One

Section No. 2434 @ wt 0.643 kg/rmt ) with colour anodized alluminium frame for ventilation with 5 mm thick Thousand One

frosted glass as per details etc complete for ventilator with provision for exhaust fan as per drawing. Hundred Seventy

Five and Paisa Fifty

118 Providing & Fixing 25 X 50 Aluminium Box section Louvers with 50 X 50 G.I. Frame including primer coat of 142.00 Sqm 4,239.98 Rupees Four

approved quality and two coats of oil painting as per Architect Drawing and incharge Engineer. Thousand Two

Hundred Thirty Nine

and Paisa Ninety

Providing and fixing colour Anodized aluminium work for Double leaf Partly Glazed Partly Prelaminated High Density Fibre Board

119 136.00 Sqm 3,612.77 Rupees Three

paneled PARTITIONS with Anodised aluminium ( anodised transparent or dyed to required shade according to IS: 1868, Minimum Thousand Six

anodic coating of grade AC 15 ) heavy duty extruded built up standard tubular sections/appropriate Z sections and other sections

Hundred Twelve and

of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold

fasts including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt or sealent of Paisa Seventy Seven

wecker 789 or Dow corning 789 grade so as to make all joints waterproof etc. Aluminium sections shall be smooth, rust free, straight, Only

mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling,

stainless steel screws as per architectural drawings and the directions of Engineer-in-charge and incl.

Providing and fixing partly glazing in aluminium PARTITIONS with EDPM gasket etc. complete as per the architectural drawings

and the directions of engineer-in-charge with 6.0 mm thick plain float glass panel of approved shade, approved make and size

fixed to the frames and frames fixed to the walls. The framed ends shall have required brushings for proper sealing.

Providing and fixing partly Prelaminated High Density Fibre Board in aluminium PARTITIONS with EDPM gasket etc. complete as per

the architectural drawings and the directions of engineer-in-charge with 6 mm thick Prelaminated High Density Fibre Board panel

of approved shade, approved make and size fixed to the frames and frames fixed to the walls. The framed ends shall have

required brushings for proper sealing.

The PARTITION FRAMES with the double groove / single groove / plain frame extruded alluminium colour anodized section frames

of average weight of 2.0 Kg./Rmt to 2.8 kg/RmT as per detailed drawing, with necessary glazing clips, including SS screws ( best

make of approved quality ) including necessary cutting and making good etc. complete.

120 Providing and applying transluscent film on glazed surface as per drawing etc, complete as directed by 20.00 Sqm 543.38 Rupees Five

Engineer in charge. Hundred Forty Three

and Paisa Thirty Eight

121 Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter-locked together 60.00 Sqm 4,546.01 Rupees Four

through their entire length and jointed together at the ends by end locks mounted on specially designed pipe Thousand Five

shaft with bracket plates, guide channels and arragements for inside and outside locking with push-pull Hundred Forty Six

operation including the cost of hood cover and spring etc. complete. (B) Shutters having width 3.5 M. and and Paisa One Only

122 Providing and fixing M.S. fan clamps tube 1 of 16 m.m. dia M.S. bar bent to shape with hooked ends to R.C.C. 1.00 No 129.14 Rupees One

slabs during laying including painting the exposed portion of the loops all as per standard design complete. Hundred Twenty

123 Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a 1,620.00 Kg 91.08 Rupees Ninety One

priming coat of red lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or and Paisa Eight Only

angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like

124 Providing & laying 10mm thick cement plaster in single coat on ceilings and sofits of stairs for interior plastering 4,025.00 Sqm 155.55 Rupees One

upto floor two level finished even and smooth in C M 1:4 ( 1 cement 4 coarse sand) including finishing etc Hundred Fifty Five

complete. and Paisa Fifty Five

a) Basement Floor Only

125 Providing & laying 10mm thick cement plaster in single coat on ceilings and sofits of stairs for interior plastering 2,920.68 Sqm 155.55 Rupees One

upto floor two level finished even and smooth in C M 1:4 ( 1 cement 4 coarse sand) including finishing etc Hundred Fifty Five

complete. and Paisa Fifty Five

a) Ground Floor Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

126 Providing & laying 10mm thick cement plaster in single coat on ceilings and sofits of stairs for interior plastering 2,558.05 Sqm 177.41 Rupees One

upto floor two level finished even and smooth in C M 1:4 ( 1 cement 4 coarse sand) including finishing etc Hundred Seventy

complete. Seven and Paisa

b) First Floor Forty One Only

127 Providing & laying 10mm thick cement plaster in single coat on ceilings and sofits of stairs for interior plastering 2,332.00 Sqm 199.26 Rupees One

upto floor two level finished even and smooth in C M 1:4 ( 1 cement 4 coarse sand) including finishing etc Hundred Ninety Nine

complete. and Paisa Twenty Six

b) Second Floor Only

128 Providing & laying 10mm thick cement plaster in single coat on ceilings and sofits of stairs for interior plastering 2,317.00 Sqm 221.12 Rupees Two

upto floor two level finished even and smooth in C M 1:4 ( 1 cement 4 coarse sand) including finishing etc Hundred Twenty

complete. One and Paisa

b) Third Floor Twelve Only

129 Providing & laying 10mm thick cement plaster in single coat on ceilings and sofits of stairs for interior plastering 2,045.00 Sqm 242.98 Rupees Two

upto floor two level finished even and smooth in C M 1:4 ( 1 cement 4 coarse sand) including finishing etc Hundred Forty Two

complete. and Paisa Ninety

b) Fourth Floor Eight Only

130 Providing & laying 10mm thick cement plaster in single coat on ceilings and sofits of stairs for interior plastering 1,283.00 Sqm 264.83 Rupees Two

upto floor two level finished even and smooth in C M 1:4 ( 1 cement 4 coarse sand) including finishing etc Hundred Sixty Four

complete. and Paisa Eighty

b) Fifth Floor (Terrace Floor ) Three Only

131 Providing & laying 10mm thick cement plaster in single coat on ceilings and sofits of stairs for interior plastering 173.00 Sqm 286.69 Rupees Two

upto floor two level finished even and smooth in C M 1:4 ( 1 cement 4 coarse sand) including finishing etc Hundred Eighty Six

complete. and Paisa Sixty Nine

b) Sixth Floor (Lift Room ) Only

132 Providing & laying 15 mm cement plaster in single coat on brick/concrete wall for interior plastering finished 2,171.00 Sqm 225.50 Rupees Two

even and smooth in cement mortor 1:4 (1 cement : 4 coarse sand) including finishing etc complete. Hundred Twenty Five

a) Basement floor and Paisa Fifty Only

133 Providing & laying 15 mm cement plaster in single coat on brick/concrete wall for interior plastering finished 6,547.66 Sqm 225.50 Rupees Two

even and smooth in cement mortor 1:4 (1 cement : 4 coarse sand) including finishing etc complete. Hundred Twenty Five

a) Ground floor and Paisa Fifty Only

134 Providing & laying 15 mm cement plaster in single coat on brick/concrete wall for interior plastering finished 5,898.91 Sqm 252.89 Rupees Two

even and smooth in cement mortor 1:4 (1 cement : 4 coarse sand) including finishing etc complete. Hundred Fifty Two

b) First Floor and Paisa Eighty

135 Providing & laying 15 mm cement plaster in single coat on brick/concrete wall for interior plastering finished 5,567.00 Sqm 280.29 Rupees Two

even and smooth in cement mortor 1:4 (1 cement : 4 coarse sand) including finishing etc complete. Hundred Eighty and

c) Second Floor Paisa Twenty Nine

136 Providing & laying 15 mm cement plaster in single coat on brick/concrete wall for interior plastering finished 5,049.00 Sqm 307.68 Rupees Three

even and smooth in cement mortor 1:4 (1 cement : 4 coarse sand) including finishing etc complete. Hundred Seven and

d) Third Floor Paisa Sixty Eight Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

137 Providing & laying 15 mm cement plaster in single coat on brick/concrete wall for interior plastering finished 4,572.00 Sqm 335.07 Rupees Three

even and smooth in cement mortor 1:4 (1 cement : 4 coarse sand) including finishing etc complete. Hundred Thirty Five

e) Fourth Floor and Paisa Seven

138 Providing & laying 15 mm cement plaster in single coat on brick/concrete wall for interior plastering finished 2,420.00 Sqm 362.46 Rupees Three

even and smooth in cement mortor 1:4 (1 cement : 4 coarse sand) including finishing etc complete. Hundred Sixty Two

f) Fifth Floor(Terrace Floor ) and Paisa Forty Six

139 Providing & laying 15 mm cement plaster in single coat on brick/concrete wall for interior plastering finished 477.00 Sqm 389.85 Rupees Three

even and smooth in cement mortor 1:4 (1 cement : 4 coarse sand) including finishing etc complete. Hundred Eighty Nine

f) Sixth Floor and Paisa Eighty Five

140 Providing & applying 20mm thick sand faced cement plaster on walls upto 10m height from ground level 873.80 Sqmt 339.15 Rupees Three

consisting of 12mm thick backing coat of C.M. 1:3 (1 cement : 1 sand ) and 8mm thick finishing coat of C.M. 1:1 Hundred Thirty Nine

(1 cement : 1 sand) including curing, necessary scaffolding in true line & level etc. comp. as directed by and Paisa Fourteen

Engineer in charge Only

Upto 10m Height

141 Providing & laying 20 mm thick double coat mala cement plaster on interior/exterior brick/ concrete work for 11,363.00 Sqm 279.29 Rupees Two

plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 cement: 4 coarse sand) Hundred Seventy

in rough finishing and 8 mm thick top coat of cement mortar 1:2 ( 1 cement : 2 coarse sand) finished with trovel Nine and Paisa

including scaffolding curing etc. complete. All Heights & Floor Twenty Nine Only

142 Providing & applying Cement plaster 20 mm thick in cement morter 1:2 using water proofing compound of 511.00 Sqmt 232.30 Rupees Two

approved quality incl. finishing etc. completed. Hundred Thirty Two

and Paisa Thirty

143 Providing and applying 2mm thick Texture paint of Earthen Textures, Travertino Texture, Coral texture or 10,193.00 Sqm 252.50 Rupees Two

equivalent make incorporating fine filaments made of polymer and aggregating natural stone powder with Hundred Fifty Two

making grooves on existing base coat of 20 mm thick smooth mala plaster etc all as approved by Architect/ and Paisa Fifty Only

Engineer in charge for all floor all height including all leads and lifts

144 Providing and fixing 150 mm wide, approved quality chicken wire mesh at junction of brick work and RCC 3,153.00 Sqm 281.79 Rupees Two

work or two dissimilar surfaces, at all heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before Hundred Eighty One

applying the plaster, including curing, scaffolding all complete as directed. and Paisa Seventy

145 Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar 1:1 including neat cement 1,218.00 Rmt 24.28 Rupees Twenty Four

finishing, watering etc. complete.For all floor and Paisa Twenty

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

146 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 1,223.00 Rmt 43.22 Rupees Forty Three

and Paisa Twenty

147 Forming groove of uniform size from 12 x 12 mm and upto 50 x15 mm in plastered surface as per approved 173.00 Rmt 80.27 Rupees Eighty and

pattern using wooden batten, nailed to the under layer including removal of wooden battens, repairs to the Paisa Twenty Six Only

edges of plaster panel and finishing the groove complete as per specifications and direction of the EIC.

148 Providing and laying Vitrified Full body/double charge 8 to10 mm thick tile flooring over 20 mm (average) base 5,353.00 Sqm 1,053.32 Rupees One

of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive Thousand Fifty Three

material including dismentaling of existing flooring and jointed with color cement slurry including finised with and Paisa Thirty Two

flush pointing & cleaning the surface etc. as directed complete as per detailed drawings & directed by E.I.C. Only

For light /dark shade.

Size of Tile 600x600 mm

149 Providing and laying Vitrified Full body/double charge 8 to 10 mm thick in skrting risers of steps and dedo on 6,465.48 Sqm 1,169.98 Rupees One

10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) on new surface or fixing on existing flooring by Thousand One

adhesive material including dismentaling of existing flooring and jointed with color cement slurry including Hundred Sixty Nine

finised with flush pointing & cleaning the surface etc. complete. and Paisa Ninety

Size of Tile 600x600 mm Eight Only

150 Providing & Laying Vitrified 8 to10 mm thick tile flooring over 20 mm ( average) base of cement mortar 1:6 (1: 871.00 Sqm 1,432.78 Rupees One

cement : 6 coarse sand ) on new surface or fixing on existing flooring by adhesive material including Thousand Four

dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & Hundred Thirty Two

cleaning the surface etc. complete for antiskit and Paisa Seventy

Size of Tile 600x600 mm Eight Only

151 Providing and fixing Granite and kota as Kitchen platform, pantry, Basin counter of width 0.60 to 0.70 m with 75.88 Sqm 3,798.61 Rupees Three

18mm thick granite of approved color in one piece for kitchen / platform. The joint shall be filled with white Thousand Seven

cement with pigments to match the color of the stone. The cutouts for Kitchen sink if required shall be provided Hundred Ninety Eight

as per drawing. The platform shall be supported on pair of polished kotah stone @ 0.75 to 0.90 m c/c filled with and Paisa Sixty One

cement slurry. It shall include facia. The facia and other edges shall be duly chamfered / rounded as per Only

drawing. The stone shall be of one shade only and different shades if found will be rejected, finished sizes shall

be measured & paid for.as directed complete as per detailed drawings & directed by E.I.C.

152 Providing and laying Granite slab (18 mm thick) one side polished flooring over 20 mm (average) base of 748.00 Sqm 2,172.51 Rupees Two

cement mortar 1:6 (1cement : 6 coarse sand) or L.M 1:1.5 laid and jointed with grey cement slurry including Thousand One

rubbing, rounding edge and polishing complete as per drawing & directed by EIC/Architect. including Hundred Seventy

making edge moulding as per pattern of Architectural Drawing etc. complete. Two and Paisa Fifty

153 Providing and laying 18mm thick Granite of specified size colour, shade and of approved make, in skirting, 2,264.00 Sqm 2,444.20 Rupees Two

risers of steps, dado, cladding , sill and jambs of door, window & ventilation frame with mini. two coat of Thousand Four

construction chemical and as per manufacture specification incl. rubbing and polishing, rounding edge and Hundred Forty Four

All joints filled with coloured cement putty as per architect detail and wiped to give sharp joints with flush and Paisa Twenty

pointing and washed as direction by E.I.C. Only

154 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 4,166.00 Sqm 1,010.92 Rupees One

(1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey Thousand Ten and

cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. Paisa Ninety Two

(A) 25 mm thick Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

155 Providing and laying polished kota stone slab 25 mm thick in risers of steps, dado and pllars laid on 10 mm 1,543.00 Sqm 1,089.18 Rupees One

thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with gray cement slurry including rubbing & Thousand Eighty

polishing etc. complete. Nine and Paisa

156 Making 3 nos. of anti skid grooves 3mm x 3mm deep on top of staircase tread at front as shown in the 750.00 Rmt 146.45 Rupees One

drawing. (Measurement will be done in Rmt for a set of 3 no grooves together) Hundred Forty Six

and Paisa Forty Five

157 Providing and laying chequered precast cement concrete tiles 22mm thick with aggegate of sizes upto 6mm 24.00 Sqm 541.21 Rupees Five

in floors, treads of steps and landings on 20mm thick bed of C.M. 1:6 (1-cement : 6-sand) or L.M. 1:1.5(1-Lime Hundred Forty One

putty : 1.5 coarse sand) joint with neat cement slurry with pigments to match the shade of the tiles and Paisa Twenty

etc,complete as per direction of Engineer-in-charge. One Only

158 Providing and laying Tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having 485.00 Sqm 1,609.84 Rupees One

with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in Thousand Six

for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement Hundred Nine and

mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement Paisa Eighty Four

mixed with matching pigments etc. Only

complete as per direction of Engineer-in-Charge.

159 Providing and fixing Double side polished Granite Stone 18 mm thick with machine cut edge to all sides as a 4.00 Sqm 3,583.48 Rupees Three

platform, shelves, divider wall etc. including making groove in wall and making the same as per original Thousand Five

including fixing the same with C:M 1:3 ( 1 cement : 3 sand ) in true line and level, curing including rubbing, Hundred Eighty

rounding edg and polishing etc.complete as per detailed drawings & directed by E.I.C. Three and Paisa

Forty Eight Only

160 Mirror polishing on Kota stone where ever required to give high gloss finish complete. 5,001.00 Sqm 151.50 Rupees One

Hundred Fifty One

and Paisa Fifty Only

161 Providing and fixing Flexible Homogeneous Anti Bacterial Vinyl Flooring of With treatment of Polyurethane 169.00 Sqm 1,868.50 Rupees One

Reinforced Surface, Densely Compacted, Anti-Bacterial and fungicidal and Antistatic having thickness of Thousand Eight

2.00mm With weight of 3150 g/m2 including curvature surface at the junction of flooring and wall and all Hundred Sixty Eight

corners. and Paisa Fifty Only

162 Providing, fixing and construction of sandwitch type platform with 18mm Tk Granite Slab one side polish 6.00 Sqmt 5,472.18 Rupees Five

platform of uniform size and colour for top & supports at 50 cm interval in Kitchen/Pantry/Counter/Laboratory Thousand Four

etc with fascia patty100mm wide including necessary cement mortar 1:3 . Kota shall be fixed over 25 mm Hundred Seventy

thick policed Kota bottom, cement joints and pointing as specified with necessary making of edges, polishing Two and Paisa

curing etc.complete as per engineer-in-charge. Eighteen Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

163 Providing and laying concrete floor by Vacuum Dewatering System for concrete road popularly known as 793.00 Cum 5,239.88 Rupees Five

Tremix Flooring. The concrete having proportion of M-25 of aggregate size 6 mm to 20 mm shall be laid over Thousand Two

the surface which have been perfectly prepared, lined & levelled with compactor machine. The concrete Hundred Thirty Nine

shall be spread and vibrated with a pocker vibrator, then levelled with double beam screeder for precision and Paisa Eighty

levelling of the concrete surface. The excess water shall be removed by vacuume dewatering and through Eight Only

honey comb filter cloth placed on the concrete surface & sealed around the edges with a covering of top

mat of required size. The excess water shall be drawn out through a suction pipe. The surface then would be

trowelled with power troweller/ power floter with a smoothing disc for extremely hard & impermeable surface,

including necessary groovings etc at regular interval, for the purpose of providing expansion joint as specified,

and filling the joints with bitumen of approvrd grade and adding 'polyster fibre of tri angular cross section

having tensile strength of 4000 to 6000 kg/cm2 like Recorn 3S or equi @ 909 gm per cum and preparing brush

The flooring shall be cured for min. 7 days. In this process the specification by the Manufacturer/ Technology

supplier would be followed.

164 Providing and laying 2–3 mm thick seamless epoxy resin flooring system of approved make, shade and 182.00 Sqm 2,121.00 Rupees Two

manufacturer over prepared concrete/cementitious floor surface, including mechanical surface preparation Thousand One

by grinding/shot blasting, removal of laitance, dust, oil, grease and loose particles, vacuum cleaning, filling Hundred Twenty

and repairing of cracks, holes and surface imperfections with approved epoxy repair compound, application One and Zero Paisa

of epoxy primer coat, epoxy resin base/body coat and self-leveling epoxy topping, complete with approved Only

hardener, fillers/aggregates, anti-skid treatment where required, edge finishing, joint treatment, protection and

curing. The finished floor shall be smooth, seamless, impervious, abrasion and impact resistant and resistant to

water, oil, chemicals and normal service loads, with uniform colour and finish. The item shall include all

materials, labour, tools, equipment, transportation, mixing, application, testing, cleaning and all incidental

works required to complete the epoxy flooring in all respects as per approved manufacturer's specifications,

drawings and directions of the Engineer-in-Charge.

165 Providing and fixing in Door, window sills and jambs M/C cut Granite Stone 18 mm thick of approved shade 3.34 Sqmt 2,665.39 Rupees Two

and size laid over a bed of C:M 1:6 including cement floating, curing, rubbing, polishing, cleaning, normal Thousand Six

moulding on each side etc. complete and joints with white cement. Hundred Sixty Five

and Paisa Thirty Nine

166 Providing and applying Wall & Ceiling painting (three coats) with plastic emulsion paint of approved brand 48,966.68 Sqm 163.18 Rupees One

and manufacture and two coats of acrylic lapy ( putty) & two coats of primer of approved brand and Hundred Sixty Three

manufacture on under coated wall & ceiling surface to give and even shade including throughly brushing the and Paisa Eighteen

surface free from mortor droppings and other foreign matter and sand paperd smooth on new work to give an Only

even shade.for all height.

167 White washing with lime on wall surface (two coats) to give an even shade including thoroughly booming the 1,721.00 Sqm 12.73 Rupees Twelve and

surface to remove all dirt, dust; mortar drops and other foreign matter. for all height Paisa Seventy Three

168 Finishing wall with weather proof low velocity ultima exterior emulsion paint on wall surface (two coats) to give 11,382.00 Sqm 117.40 Rupees One

an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose Hundred Seventeen

powdered materials.etc complete for all height and Paisa Forty Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

169 Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of approved brand and 102.00 Sqmt 40.59 Rupees Forty and

manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from Paisa Fifty Nine Only

mortar dropping and other foreign matter and sand papered smooth.

170 Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of approved brand and 36.00 Sqmt 46.14 Rupees Forty Six and

manufacture on new ceiling surface to give an even shade including thoroughly brushing the surface free Paisa Thirteen Only

from mortar dropping and other foreign matter and sand papered smooth

171 Finishing wall with weather proof exterior emulsion paint (two coats) including base primer coat of approved 873.80 Sqmt 152.79 Rupees One

brand and manufacture on wall surfaceto give an required shape even shade after thoroughly brushing the Hundred Fifty Two

surface to remove all dirt, and remains of loose powdered materials.etc complete and Paisa Seventy

172 Applying priming coat over new steel and other metal surfaces after and including preparing the surface by 2.20 Sqmt 35.39 Rupees Thirty Five

thoroughly cleaning,oil, grease, dirt and other foreign matter and scoured with brushes fine steel wool, and Paisa Thirty Nine

scrapers and sand paper with ready mixed priming paint brushing red lead. Only

173 Painting two coats (excluding priming coat) on new steel and other metal surface with synthetic enamel paint, 67.20 Sqmt 66.94 Rupees Sixty Six and

brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. Paisa Ninety Four

174 Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing, 310.01 Sqm 89.35 Rupees Eighty Nine

interior to give an even shade including cleaning the surface an even shade including cleanicn the surface and Paisa Thirty Five

of all dirt, dust and other foreign matter.for all height Only

175 Providing and laying water proofing treatment on terrace with china mosaic floor ingincluding applying neat 2,463.84 Sqm 1,093.83 Rupees One

cement slurry 2.75kg/cm2 on cement admixed with water proofing component after cleaning the surface Thousand Ninety

/laying cement concrete with brick bat 75 mm to 100 mm thick with 50% of C.M. 1:5 to required slope including Three and Paisa

ramming at junction of wall and slab after two days of proper curing applying broken china mosaic flooring Eighty Three Only

for plain and curve surface 12mm to 20mm white colour broken piece of glazed tiles to be laid over 12mm

thick cement mortar bedding of CM (1:3) to plain and slop and to be tampered to bring mortar cream up to

surface with using white cement and incl. Rounding of junctions and extending them up to 30 cm along the

wall and curing with bends any patterns or design as per drawing and direction incl.

176 Providing composite water proofing treatment to floor and walls of water tank, w.c. & bath area, through 1,235.00 Sqm 422.18 Rupees Four

approved agencies preparing floor and wall for water proofing work/ by chasing/cutting as per the Hundred Twenty Two

companies requirement. First by providing and applying cementitious crystalline based waterproofing for and Paisa Eighteen

concrete rafts, walls, water tanks, slabs, concrete floors etc. with Epoxy coating. The application to be done Only

from positive side on a wet open pore concrete surface with brush @ to 1 kg/ sqm as per mfg.'s specification.

After testing with ponding after 7 days, a layer of plaster with waterproofing compound/ admixture about

mm thick in the floor / depression and about 18 mm on the sidewalls / depression upto the floor level shall be

provided over the surface treated with crystalline powder. The waterproof plaster about 18 mm thick to be

continued on the walls above the floor level for a height of 600 mm with surface suitable to receive further

finishing treatment all complete as per companies specifications and instructions and as directed for all

heights and floors. The round vata shall be included in this in sq.mt. and shall be taken upto top of round on

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

177 Indepth Crystalline Treatment- Surface Preparation: 1,702.00 Sqm 834.26 Rupees Eight

Minor cleaning work, scarifying the surface to remove laitance, cleaning with compressed air, chasing open Hundred Thirty Four

construcituon joints & cracks etc. to form a U shaped groove of 20mm x 20mm and filling with polymer and Paisa Twenty Six

modified mortar using polymer in the ratio of 1pbw polymer:10 pbw cement: 30 pbw quartz sand. Making of Only

angle fillets all around the periphery of the wall with polymer modified mortar in the ratio of in the ratio of

1pbw polymer:10 pbw cement: 30 pbw quartz sand. Providing and applying, in depth penetrating type

crystalline waterproofing system, applied as a slurry application by brush in two coats with a total consumption

of approx.1.50 Kg per Sqm, to be applied over the RCC slab & on vertical surfaces, curing for minimum 3 days

etc.complete in all aspects as per manufacturers instructions and as directed by Engineer/Architect. The area

of the floor and sides of tank treated shall be considered for payment purpose.

178 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth 3,423.00 Sqm 1,209.30 Rupees One

below ground level for under ground structures as directed by Engineer-in-Charge and consisting of : Thousand Two

(i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of Hundred Nine and

cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in Paisa Thirty Only

the recommended proportion over the leveling course. Joints sealed and grouted with cement slurry mixed

with water proofing compound.

(ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse

sand) mixed with water proofing compound in recommended

(iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal

size spreading @ 8 cudm/sqm thoroughly embedded in the

Using rough kota stone.

179 Providing and laying China mosaic type water proofing treatment on terrace and 300mm vertical surface of 40.00 Sqmt 1,071.61 Rupees One

terrace (300mm Vatta) including ( a) applying neat cement slurry 2.75 kg./ sqm of cement admixed with water Thousand Seventy

proofing compound after cleaning the surface. (b) laying cement concrete using brick bats 25 to 100mm size One and Paisa Sixty

with 50 % of C.M. 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound over 20mm thick One Only

layer of c.m. 1:5 to required slope including rounding of junction of walls and slabs. (c) After two days of

proper curing , applying a second coat of cement slurry. (d) Finishing the surface with 20mm thick C.M. 1:4 and

China mosaic tilling & finally finishing the surface with trowel with white cement slurry. (e) after finishing the

whole terrace shall be flooded with water for a period of two weeks.

180 Pressure Release Pipe Treatment 229.00 Nos. 1,414.00 Rupees One

Providing and Fixing 50 mm dia G.I. “B” class pressure release pipes embedded with PCC layer and extended Thousand Four

above the raft slab upto 150 mm above F.F.L. including sealing of the base Junction between the pipe and Hundred Fourteen

the waterproofing membrane with liquid Applied PU flashing of Dr. Fixit Flexi PU 270 or equivalent make with and Zero Paisa Only

reinforcing polyester mesh embedded between the two coats of Dr.Fixit Flexi PU 270 including grouting the

pipes with cement slurry grout admixed with Pidicrete AM @ 225 GM per bag of cement as indicated in the

drawing / recommendation.

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

181 Providing and filling with scrap of AAC block (good quality) as a cinder as directed by engineer in charge in 349.00 Cum 1,636.20 Rupees One

sunks in layers of 15 cm thk including watering placing ramming well etc. as directed. Thousand Six

Hundred Thirty Six

and Paisa Twenty

182 Dry Wall Partition 212.44 Sqm 2,100.80 Rupees Two

The scope includes supply and erection /installation of the item on site. for details and assembly work refer Thousand One

drawings, Gypsum board with Galvanized Iron frame laminate to be approved by client / consultants. The rate Hundred and Paisa

includes cost of all labour, material and with necessary tools, tackles, adhesive, screws etc. The rate also Eighty Only

includes for all necessary items required to complete the job as per design /drawing and client / consultant's

183 Providing plinth protection to building including excavation in oridnary soil and laying cement concrete (0.10 325.00 Sqm 1,631.15 Rupees One

mt thk)1 : 4: 8 using Stone aggregates of 20 mm nominal size in foundation Layer and above on brick masonry Thousand Six

1:6 and above on PCC providing Cement Cocrete 1:2:4 (0.10 mt thk)(1 Cement : 2 Coarse Sand : 4 Stone Hundred Thirty One

Aggregrate 20 mm nominal size) coping on top including Broom finishing (plaster 10 mm )wiht Square line(0.20 and Paisa Fifteen

X 0.20) marking on Top and Side )and curing etc complete only top area should be measured.etc., complete Only

all as directed by Engineer-in-Charge.

184 Providing and laying and fixing 50 mm thick expansion joint by laminated closed cell polythene foam joint filler 263.00 Sqm 1,491.03 Rupees One

in sheet foam as directed, etc. complete. Thousand Four

Hundred Ninety One

and Paisa Three Only

185 Applying and providing Expansion joint sealing System on 50/100 mm vide joint including cleaning of exansion 105.00 Sqm 4,772.00 Rupees Four

joint by mechanical means provision of adhesive and flexible membrane with required bond length as per Thousand Seven

menufracturer specification and 4mm thick alluminium strip covering with one side sloted and bolted with Hundred Seventy

suitable system, inclusive of all manpower, machinery and material as per specification and as directed. Two and Zero Paisa

186 Providing and fixing of expansion joint system of approved make and manufactures for various roof locations 50.00 Rmt 4,775.99 Rupees Four

as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminu base Thousand Seven

members with, self aligning and self centering arragement support plates asper ASTM B221-02. The system shall Hundred Seventy

be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is Five and Paisa

capable of accommodating multidirectional seismic movement without stress to its components. System shall Ninety Nine Only

consist of metal profile that incorporates a universal aluminum base member designed to accommodate

various project conditions and roof treatments. The cover plate shall be designed of width and thickness

required to satisfy movement and loading requirements and secured to base members by

utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions.

The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding

aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical

isplacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to

UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture

Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall

confirm to ASTM 6063).

Roof Joint of 100 mm gap

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

187 Providing and fixing single layer water proof Gypsum board 12.5 mm thick sections using water proof board of 865.00 Sqm 606.95 Rupees Six Hundred

size 1220 mm x 1830 mm x 8.0 mm suspended by GI suspender channel of size 25 mm x 3mm with intermediate Six and Paisa Ninety

channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x Five Only

0.55 mm at 457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops

incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat,joining compound top coat on

ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as per detail drawing as per directions of

the Engineer-in-Charge.

188 Providing and fixing in position collapsible steel shutters with vertival channels 20 mm x 10 mm x 2 mm braced 51.00 Sqm 5,980.75 Rupees Five

with flat iron diagonals 20 mm x 5 mm size with top & bottom rails of T iron 40 mm x 40 mm x 6 mm with 38 mm Thousand Nine

diameter steel pulleys complete with bolts, nuts, locking arrangements, stopper handles including applying a Hundred Eighty and

priming coat of red lead paint & Painting two coats oil paint Paisa Seventy Five

189 Providing & Fixing anchor fasteners including drilling in RCC / Masonary Members, fastening with structural steel 10.00 No, 262.60 Rupees Two

members etc complete. Hundred Sixty Two

b)10mm dia. and Paisa Sixty Only

190 Providing & Fixing anchor fasteners . including drilling in RCC / Masonary Members, fastening with structural 10.00 No, 371.68 Rupees Three

steel members etc complete. Hundred Seventy

c)12mm dia. One and Paisa Sixty

191 Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under relevant item of work ) 10.00 No, 205.03 Rupees Two

after drilling the hole of required diameter & depth ,cleanning of the same ,providing /filling the hole with Hundred Five and

Injection Mortar inserting reinforcement bar etc. complete as per Manufacturers & architects instruction.The Paisa Three Only

work shall be carried out by the technical workmens/agency approved by the manufacturer and under

technical supervision of Manufacturer of Injection grout including all materials,tool tackles ,labour

(a) 8 mm. dia.bar -Holes 12mm dia Depth 150mm

192 Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under relevant item of work ) 10.00 No, 334.31 Rupees Three

after drilling the hole of required diameter & depth ,cleanning of the same ,providing /filling the hole with Hundred Thirty Four

Injection Mortar (HY 150 or approved equivalant),inserting reinforcement bar etc. complete as per and Paisa Thirty One

Manufacturers & architects instruction.The work shall be carried out by the technical workmens/agency Only

approved by the manufacturer and under technical supervision of Manufacturer of Injection grout including

all materials,tool tackles, labour etc.complete.

(B) 10 mm. dia.bar -Holes 14mm dia Depth 150mm

193 Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under relevant item of work ) 10.00 No, 462.58 Rupees Four

after drilling the hole of required diameter & depth ,cleanning of the same ,providing /filling the hole with Hundred Sixty Two

Injection Mortar (HY 150 or approved equivalant),inserting reinforcement bar etc. complete as per and Paisa Fifty Eight

Manufacturers & architects instruction.The work shall be carried out by the technical workmens/agency Only

approved by the manufacturer and under technical supervision of Manufacturer of Injection grout including

all materials,tool tackles, labour etc.complete.

(C) 12 mm. dia.bar -Holes 16mm dia Depth 150mm

194 Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under relevant item of work ) 5.00 No, 1,440.26 Rupees One

after drilling the hole of required diameter & depth ,cleanning of the same ,providing /filling the hole with Thousand Four

Injection Mortar (HY 150 or approved equivalant),inserting reinforcement bar etc. complete as per Hundred Forty and

Manufacturers & architects instruction.The work shall be carried out by the technical workmens/agency Paisa Twenty Six Only

approved by the manufacturer and under technical supervision of Manufacturer of Injection grout including

all materials,tool tackles, labour etc.complete.

(D) 16 mm. dia.bar -Holes 20mm dia Depth 160mm

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

195 Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under relevant item of work ) 5.00 No, 2,698.72 Rupees Two

after drilling the hole of required diameter & depth ,cleanning of the same ,providing /filling the hole with Thousand Six

Injection Mortar (HY 150 or approved equivalant),inserting reinforcement bar etc. complete as per Hundred Ninety Eight

Manufacturers & architects instruction.The work shall be carried out by the technical workmens/agency and Paisa Seventy

approved by the manufacturer and under technical supervision of Manufacturer of Injection grout including Two Only

all materials,tool tackles, labour etc.complete.

(E) 20 mm. dia.bar -Holes 24mm dia Depth 200mm

196 Providing and wet drilling accurate and clean holes of 37-300 mm range without vibration through Hilti P-U 10.00 No, 775.68 Rupees Seven

ABRASIVE CORE BIT and Rig-based drilling system using diamond drilling machine DD200 having 1:1 & 1:3 Hundred Seventy

gearing ratio for core cutting using HILTI machine in RCC beams/ Walls/ Columns etc. for laying pipes., control Five and Paisa Sixty

panel indicator to display proper pressure application, capable of drilling at angle from 0degree- 45degree Eight Only

and do overhead application. The rate shall also include for providing scaffolding, labour and approved tools

197 Providing and wet drilling accurate and clean holes of 37-300 mm range without vibration through Hilti P-U 5.00 No, 872.64 Rupees Eight

ABRASIVE CORE BIT and Rig-based drilling system using diamond drilling machine DD200 having 1:1 & 1:3 Hundred Seventy

gearing ratio for core cutting using HILTI machine in RCC beams/ Walls/ Columns etc. for laying pipes., control Two and Paisa Sixty

panel indicator to display proper pressure application, capable of drilling at angle from 0degree- 45degree Four Only

and do overhead application. The rate shall also include for providing scaffolding, labour and approved tools

198 Providing and wet drilling accurate and clean holes of 37-300 mm range without vibration through Hilti P-U 10.00 No, 931.22 Rupees Nine

ABRASIVE CORE BIT and Rig-based drilling system using diamond drilling machine DD200 having 1:1 & 1:3 Hundred Thirty One

gearing ratio for core cutting using HILTI machine in RCC beams/ Walls/ Columns etc. for laying pipes., control and Paisa Twenty

panel indicator to display proper pressure application, capable of drilling at angle from 0degree- 45degree Two Only

and do overhead application. The rate shall also include for providing scaffolding, labour and approved tools

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

199 Providing and wet drilling accurate and clean holes of 37-300 mm range without vibration through Hilti P-U 10.00 No, 1,066.56 Rupees One

ABRASIVE CORE BIT and Rig-based drilling system using diamond drilling machine DD200 having 1:1 & 1:3 Thousand Sixty Six

gearing ratio for core cutting using HILTI machine in RCC beams/ Walls/ Columns etc. for laying pipes., control and Paisa Fifty Six

panel indicator to display proper pressure application, capable of drilling at angle from 0degree- 45degree Only

and do overhead application. The rate shall also include for providing scaffolding, labour and approved tools

200 Providing and wet drilling accurate and clean holes of 37-300 mm range without vibration through Hilti P-U 10.00 No, 1,163.52 Rupees One

ABRASIVE CORE BIT and Rig-based drilling system using diamond drilling machine DD200 having 1:1 & 1:3 Thousand One

gearing ratio for core cutting using HILTI machine in RCC beams/ Walls/ Columns etc. for laying pipes., control Hundred Sixty Three

panel indicator to display proper pressure application, capable of drilling at angle from 0degree- 45degree and Paisa Fifty Two

and do overhead application. The rate shall also include for providing scaffolding, labour and approved tools Only

201 Providing and wet drilling accurate and clean holes of 37-300 mm range without vibration through Hilti P-U 10.00 No, 1,551.36 Rupees One

ABRASIVE CORE BIT and Rig-based drilling system using diamond drilling machine DD200 having 1:1 & 1:3 Thousand Five

gearing ratio for core cutting using HILTI machine in RCC beams/ Walls/ Columns etc. for laying pipes., control Hundred Fifty One

panel indicator to display proper pressure application, capable of drilling at angle from 0degree- 45degree and Paisa Thirty Six

and do overhead application. The rate shall also include for providing scaffolding, labour and approved tools Only

202 Providing and wet drilling accurate and clean holes of 37-300 mm range without vibration through Hilti P-U 10.00 No, 2,230.08 Rupees Two

ABRASIVE CORE BIT and Rig-based drilling system using diamond drilling machine DD200 having 1:1 & 1:3 Thousand Two

gearing ratio for core cutting using HILTI machine in RCC beams/ Walls/ Columns etc. for laying pipes., control Hundred Thirty and

panel indicator to display proper pressure application, capable of drilling at angle from 0degree- 45degree Paisa Eight Only

and do overhead application. The rate shall also include for providing scaffolding, labour and approved tools

203 Providing and wet drilling accurate and clean holes of 37-300 mm range without vibration through Hilti P-U 10.00 No, 2,908.80 Rupees Two

ABRASIVE CORE BIT and Rig-based drilling system using diamond drilling machine DD200 having 1:1 & 1:3 Thousand Nine

gearing ratio for core cutting using HILTI machine in RCC beams/ Walls/ Columns etc. for laying pipes., control Hundred Eight and

panel indicator to display proper pressure application, capable of drilling at angle from 0degree- 45degree Paisa Eighty Only

and do overhead application. The rate shall also include for providing scaffolding, labour and approved tools

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

204 Supplying And Fixing Partitions are generally structured by Aluminum extruded sections. All panels are in standard size and ready to 282.00 sqm 6,514.50 Rupees Six

assemble condition. All exterior metal surfaces are POWDER COATED FINISH .12 mm thk. Pre laminated or laminated panel on both Thousand Five

the side of the partition. It has provision for all utility management and to mount worktops, etc., All joineries are free from Nailing,

Hundred Fourteen

Screwing and adhesives. .All components are removable without any damage and designed to reconstruct, reorient or

reconfiguration layout very easily.Entire systems are free from maintenance like refinishing anti pest treatments or refitting, lifetime.It and Paisa Fifty Only

has inherent Sound and thermal insulation properties. All panels are twin layered and very proper sealing in joint are provided to

ensure these properties. System is designed in such a manner that resizing of structure and related mountings can be carried out at

site easily, if required. It is Eco‐Friendly in true sense. Partition Skeleton Main Vertical Section : Aluminum extruded section having

overall size of 73 mm x 29 mm having wall thk. 1.50 mm with provision to connect to outer vertical closing section at all side. Main

Horizontal section : Aluminum extruded section having overall size 73 mm x 29 mm having wall thk. 1.50 mm with provision to

connect with each other at side to supporting panels of 12 mm thk. on the both sides of partition. Electric trench box section :

Aluminum extruded section having over all size 60 mm x 80 mm having wall thk. 1.40 mm with snap fitting arrangment. Connecting

pole section : Aluminum extruded section having overall size 99.60 x 99.60 box section having wall thk. 1.40 mm and provision to

connect with all type of connections. ( i.e. " L " , " T " & " PLUS connectivity ). Verticle & Horizontal covring seal section : Aluminum

extruded section having over all size 32.20 x 8.40 mm having wall thk. 1.20 and provision to cover all open sides with snap fitting.

Double Glass Section : Aluminum extruded section having over all size 56.0 mm x 9.70 mm having wall thk. 1.20 mm and provision

to hold 5 mm thk. Glass with cushioned rubber for every side of glass on both the sides of the panel. Solid filler panels: Solid panel

made out of 12.00 mm thk. laminated / pre laminated board of particle or MDF or PLY on both side of the partition. Glass filler

panels : having 5 mm thk. Clear toughened Glass on both sides of the partition. APPROVED MAKE : GODREJ , HERMAN MILLER,

STEELCASE, KNOLL,HOF

205 Providing and Fixing 10 mm thick multiwall polycarbonate roofing sheet lexan /bayer UV resistant fixed with hilti 142.00 sqm 2,113.93 Rupees Two

screw and rubber silicon sealer and alluminium strip of size 50 mm x 3 mm etc complete as directed by Thousand One

Engineer in charge. Hundred Thirteen

and Paisa Ninety

206 Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for Wall Guard, 132.00 Rmt 685.99 Rupees Six Hundred

expansion joints etc complete as directed by Engineer in charge. 200 mm Eighty Five and Paisa

wide. Ninety Nine Only

207 Steel work welded, in built up sections, framed work including cutting, hoisting, fixing in position and applying a 5,450.00 Kg 91.08 Rupees Ninety One

priming coat of red lead paint & Painting two coats oil paint. and Paisa Eight Only

(A) In beams and joists, channels, angles, tees, flats with connecting plates or angle cleats as in main & cross

beamnship & jack rafters, purlins connected to common rafters and like.

208 Building Signage : 54.00 Sqm 7,782.58 Rupees Seven

Supply, Installation, Testing and commissioning of ACP Background board of required thickness, smooth matt Thousand Seven

finish, illuminated with yellow and blue led and face glow letters above it. The frame shall be offset from the Hundred Eighty Two

glazing and shall be supported by the floor beams on Terrace and Terrace Floor. The peripheral gap space and Paisa Fifty Eight

between front side and the backing shall also be covered with acrylic sheets, having a width of 500 to 700 Only

mm. Rate to include cost of steel framework, Aluminium framework and inclusive of two coats of primer and

anti-corrosive paint. Contractor shall prepare the detailed shop drawings for the item and same shall be

approved before execution. Complete for all height, levels, floors in all shapes as per the Architectural

drawings and directions of engineer-in-charge.

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

209 Interior Signage- Laser Cut Sign Board : 33.00 Sqm 7,544.86 Rupees Seven

Providing & fixing approved stainless steel laser cut display signage panel/ board on building at all levels and Thousand Five

heights in form of letters/ numbers/ symbol/ logo, for Address/Information/designation of person/officer as per Hundred Forty Four

details. The Signage letters language shall be in Gujarati/Hindi/English and of any sizes, color and width / and Paisa Eighty Six

height/ length. The plate shall be atleast 50mm extra on all sides of the letters for large size signages and Min. Only

25mm for all Small size signages to be placed within the building, including cutting, finishing, fixtures and

210 Providing and fixing Ductile iron Man Hole Covers/ Strom Water Grating and Grating with frame of Various 4,245.00 Kg 151.50 Rupees One

sizes,weight and types and load bearing capacity as per EN-124, equivalent NECO with prior approval of Hundred Fifty One

concerned Superitending Engineer. and Paisa Fifty Only

211 Speed Breaker : 28.00 Rmt 3,762.25 Rupees Three

Providing and fixing Speed breakers / bumpers having capacity 50 tons for the driveways and ramps. Thousand Seven

Black and Yellow color high intensity PVC speed bumps marked with reflective tapes, having section Hundred Sixty Two

and Paisa Twenty

of size L750 MM x 250MM x75 MM shall be fixed as per length 4 nos (2 black, 2 yellow) and design

with anti skid pattern for grip filling cement inside. The speed breakers shall be installed at adequate

spacing, with the help of mounting hardware, pre-drilled holes, butyl tapes, spike bolts, etc., inclusive

of all labours and materials.The Work shall be carried out as per manufacturer's instructions , detailed

drawings and Architect/EIC instructions.

212 Car Stopper : 55.00 No. 681.75 Rupees Six Hundred

Supplying and fixing PVC Car Stopper of black with yellow reflective sheeting at parking areas having Eighty One and

size of (L)500mm x (H)160mm x (W)150mm, fixed with stainless steel flathead fastener flush and plastic Paisa Seventy Five

cement adhesive according to manufacturer instructions, detailed drawingand Architect/EIC

213 CONVEX MIRROR : 4.00 No. 4,231.90 Rupees Four

Supplying, Installating, Testing & Commissioning of Convex Mirror having size 32" (800 mm) fixed on Thousand Two

pole or wall. ABS Plastic and Mirror with back frame made of Unbreakable Polycarbonate etc, as per Hundred Thirty One

and Paisa Ninety

manufacturer's instructions , detailed drawings and Architect/EIC instructions.

214 Supplying, Installating, Testing & Commissioning of Queue manager with Height of the Post 950 mm 2.00 No. 1,414.00 Rupees One

(Approx.). Material & Finish Mild Steel - Epoxy Powder Coated. Base Mild Steel having 300 mm Thousand Four

diametre. Weight of the Post 9-10 Kgs Approx. Belt width 48 mm and Length 8.5 feet or 2.0 Meters Hundred Fourteen

and Zero Paisa Only

(Approx.) Belts Polyester with Custom Color, Screen & Digital Print options will be indicated on final

stage. Connectivity 3 Receiving & 1 Extension end for 4 way connectivity.

215 Providing and fixing Parking Signage of Reflective Media and ACP sheet panelling with specified size 9.00 Sqm 227.25 Rupees Two

as per manufacturer's instructions , detailed drawings and Architect/ EIC instructions. Hundred Twenty

Seven and Paisa

216 CORNER GUARD : 547.20 Rmt 2,525.00 Twenty FiveTwo

The system fixed to brick/RCC wall at the corner from finished floor level. Adjustable end cap. High Thousand Five

impact vinyl acrylic snap-on matt finished. The corner guard must be 50 mm x 50 mm , as specified by Hundred Twenty Five

and Zero Paisa Only

the client in size with aluminum retainer and rigid vinyl, must have 1.5 mm thick aluminum retainer,

must have 2 mm thick scratch and stain resistance rigid vinyl cover, should be coated with antifungal

and antibacterial chemical. the system shall be designed to withstand impact. making it ideal for

areas like high traffic corridors and corners. the vinyl cover should be fire retardant according to the

norms and should have test certificates of that. it must be according to ROHS compliances. The

material should come the ROHS certification from govt approved lab. texture to provide an anti-slip

surface , it should have adjustable end cap .aluminum retainer should be in mill finish and fabricated

from 6063-T5 alloy etc complete, As per drawings and design supplied by architect and instruction

given by authority and E.I.C.

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

217 WALL GUARD : 312.47 Rmt 4,848.00 Rupees Four

The system fixed to brick /RCC wall at 300mm high from finished floor level comprising continuous Thousand Eight

aluminum rail retainer, 2 impact absorbing strip, end cap and high impact vinyl acrylic snap-on Hundred Forty Eight

and Zero Paisa Only

textured surface cover. The wall guard must be 152mm wide, as specified by the client , must have

1.5 mm thick aluminum retainer, must have 2 mm thick scratch and stain resistance rigid vinyl cover,

should be coated with antifungal and antibacterial chemical. the system shall be designed to

withstand impact and provides a cushioned surface with its integrated rubberized absorber, making

it ideal for areas like high traffic corridors, loading bays and light cargo lifts. the vinyl cover should be

fire retardant according to the norms and should have test certificates of that. it must be according

to ROHS compliances. The material should come the ROHS certification from govt approved lab.

texture to provide an anti-slip surface , it should have adjustable end cap , corner joint and adaptor

plate .aluminum retainer should be in mill finish and fabricated from 6063-T5 alloy .

218 Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumin surface 477.00 Sqm 367.72 Rupees Three

providing and laying a hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads Hundred Sixty Seven

@ 250gms per sqm area, thickness of 2.5mm is excluding of surface applied glass beds as per IRC:35-2015. The and Paisa Seventy

finished surface to be level, uniform and free from streaks and holes. zebra patta /bump patta lane/center Two Only

line/ edge line/cut patta. The white color marking should provide liminance coefficinet on cemend road shalll

be min 130mcd/m2/lux and Asphalt road shall be min 100 mcd /m2/ lux during the service life during the day

time. The marking should meet the performance criteria for night time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of IRC 35-2015. Warranty for the Retro reflectivity should be two

219 Supplying and fixing cat eye (Stimsonite) made out from Acrilo beautile sterine injuction high compressed 35.00 No. 375.72 Rupees Three

molding with reflector made of MMC (prismatic type of size 12cm x 6cm x 2.5cm) provided with bituminous Hundred Seventy

adhesive 100g. with each unit for fixing. (High Intensity grade). Five and Paisa

Seventy Two Only

220 PM ROOM 2,000.00 Ltr 3.95 Rupees Three and

Providing Erecting and Fixing Double coated PVC (Sintex ) isi mark water tank of required capacity each with Paisa Ninety Four

all naccessary fittings & Connection etc.complete on tarrace. Only

221 Providing and fixing flat back wash basin 550 mm x 400 mm size of first grade, white in colour with single hole 2.00 Nos 2,127.17 Rupees Two

for pillar trap with CI or MS brackets painted with including cutting holes and making good the same including Thousand One

providng and fixing CP brass waste coupline 32mm dia including providng and fixing MI washer uinon 32 mm Hundred Twenty

dia, including providng and fixing 15mm dia pillar tap capsten head screw down high pressure with screws, Seven and Paisa

shanks and back nuts,including providing and fixing waste pipe 15mm x 600 mm pvc inlet connection 15mm Seventeen Only

brass screw down stop tap with necessary fititngs etc. complete

222 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including 177.66 Rmt. 72.65 Rupees Seventy Two

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe and Paisa Sixty Four

shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

223 Providing laying and jointing in true line and level 20mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including 119.00 Rmt. 80.80 Rupees Eighty and

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe Paisa Eighty Only

shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

224 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including 139.00 Rmt. 91.84 Rupees Ninety One

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe and Paisa Eighty

shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed Four Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

225 Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including 222.00 Rmt. 119.15 Rupees One

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe Hundred Nineteen

shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed and Paisa Fifteen

including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, Only

including cost of all materials.

226 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including 232.00 Rmt. 148.12 Rupees One

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe Hundred Forty Eight

shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed and Paisa Eleven

including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, Only

including cost of all materials.

227 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including 268.00 Rmt. 195.67 Rupees One

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe Hundred Ninety Five

shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed and Paisa Sixty

including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, Seven Only

including cost of all materials.

228 Providing laying and jointing in true line and level 65mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including 38.00 Rmt. 555.50 Rupees Five

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe Hundred Fifty Five

shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed and Paisa Fifty Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

229 Providing laying and jointing in true line and level 80mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including 298.00 Rmt. 757.50 Rupees Seven

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe Hundred Fifty Seven

shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed and Paisa Fifty Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

230 Providing and fixing to wall, ceiling and floor 10 Kg f/cm2 working pressure polythelene pipes of the following 8.00 Rmt. 280.23 Rupees Two

outside dia. Low density, complete with special flange compression type fittings wall clamps etc. including Hundred Eighty and

making good the wall, ceiling and floo Paisa Twenty Three

231 Providing and fixing to wall, ceiling and floor 10 Kg f/cm2 working pressure polythelene pipes of the following 18.00 Rmt. 339.05 Rupees Three

outside dia. Low density, complete with special flange compression type fittings wall clamps etc. including Hundred Thirty Nine

making good the wall, ceiling and floo and Paisa Four Only

232 Providing & fixing in position Cowel vent to pipes 75 mm Dia 1.00 Nos 393.04 Rupees Three

Three and Paisa Four

233 Providing & fixing in position Cowel vent to pipes 100 mm Dia 1.00 Nos 505.17 Rupees Five

Hundred Five and

Paisa Seventeen

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

234 Providing and fixing PVC swr Nanhi trape IS 14735 for drain 100 mm diameter with jali of following nominal dia 2.00 Nos 585.37 Rupees Five

of self cleaning design with CI screed down or hinged grating including cos of cutting and making good the Hundred Eighty Five

walls and floors including providing and fixing 150mm x 150 mm size and Paisa Thirty Six

235 Providing and fixing screw down bib taps brass chromimum plated screw down bib tap 2.00 Nos 186.83 Rupees One

(I) 15 mm dia Hundred Eighty Six

and Paisa Eighty Two

236 Providing & fixing gun metal check or non-return full way wheel valve of 1.00 Nos 420.63 Rupees Four

(A)25 mm dia. Hundred Twenty

and Paisa Sixty Three

237 Providing & fixing gun metal check or non-return full way wheel valve of 1.00 Nos 663.43 Rupees Six Hundred

(B)40 mm dia Sixty Three and Paisa

238 Provdg. & fixing C.P. Brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. Brass 2.00 Nos 616.42 Rupees Six Hundred

screws. (B) 600 mm x 20 mm size. Sixteen and Paisa

239 Providing & fixing S.W. gully trap with C.I. grating brick masonary chamber & water tight C.I. cover with frame 1.00 Nos 1,292.19 Rupees One

of 300 mm x 300 mm size (inside) with standard weight Thousand Two

(i) square mouth trap Hundred Ninety Two

( C ) 150 mm x 100 mm size P or R Type and Paisa Nineteen

240 Suppy, Installation, Testing and Commisioning of 6 body mortuary cabinate having temperature renge from -6 1.00 Nos 9,43,854.67 Rupees Nine Lakh

degree to +6 degree and approx. dimensions 3.20 x 2.40 x 1.80 m having puf panels inside and outside with MS Forty Three Thousand

powder coated trolly mechanism along with ancillary material, full SS 304 body, gasket replacement provision, Eight Hundred Fifty

PU foam insulator, lighting provision, temperature indicator cum controller, mortuary tray and carriage Four and Paisa Sixty

assembly and other system requirements as mentioned in detailed technical specification Six Only

241 PLUMBING WORK 35.00 Nos 324.63 Rupees Three

Supply,Installing, tesitng and commissioning cpvc ball valve working pressure of 10 kg/cm2 etc. including Hundred Twenty Four

providing of connectors, flanges, nuts, bolts, gaskets, etc as per drawings, specification and as directed by the and Paisa Sixty Three

Project Manager. Only

242 Supply,Installing, tesitng and commissioning concealed forged brass lever operated ball valve of full flow with 40.00 Nos 819.16 Rupees Eight

forged brass ball (Machined to mirror smooth finish with hard chrome plated) and spindle with setting and Hundred Nineteen

gland of superior quality having minimum working pressure of 16 kg/cm2 etc. including providing of and Paisa Sixteen

connectors, flanges, nuts, bolts, gaskets, etc as per drawings, specification and as directed by the Project Only

243 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertionsetc. 5.00 Nos 4,586.97 Rupees Four

complete (The tail pieces, tapers etc if required will be paid separately) : Thousand Five

50 mm Hundred Eighty Six

and Paisa Ninety

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

244 Providing and Supplying ISI mark C.I Sluice valve as per IS 14846 of Following Class and Diameter Including all 70.00 Nos 1,957.38 Rupees One

Taxes insurance,transportation,,freight charges,Octoi,Inspection charges,Loading ,Unloading Conveyance to Thousand Nine

department Store ,Stacking etc. Complete. Hundred Fifty Seven

50 mm Dia. and Paisa Thirty Eight

245 Providing and Supplyng gun metal non return valve 2.00 Nos 1,153.09 Rupees One

50 mm Dia. Thousand One

Hundred Fifty Three

and Paisa Nine Only

246 SOIL, WASTE, VENT PIPES & FITTINGS 813.00 Mtr. 857.65 Rupees Eight

Supply, installation, testing and commissioning of all Pipes and pipe accessories, traps, supply of supports and Hundred Fifty Seven

support fixing, chase cutting and making good the surfaces, coving, core cutting, etc. required shall be in the and Paisa Sixty Five

Scope of the Contractor. All consumables other than materials supplied by manufacturer required for fixing Only

the china ware, sanitary ware and CP fittings and fixtures shall be provided by the Contractor to make the

item fully operationable.

Providing, fixing, testing and commissioning ISI Marked UPVC SWR grade soil, waste and vent pipes Type 'B'

kg/sq cm conforming to IS: 13592 including all SWR moulded fittings conforming to IS: 14735 i.e. bends

(plain/door), junctions, cowls, offsets, Y (plain/door), tees (plain/door), clean out plut, etc., with G.I slotted

angle with U clamps and anchor fasteners at 1m interval. Ring fit jointing including cutting holes in walls and

floors, wherever required and making them good, complete as directed by the Project Manager. The scope

shall also include fixing waste pipes to the floor with concrete 1:2:4 bedding for full length and wall/ceiling with

necessary clamps, supports, connections, protecting fittings and pipes till the final handing over etc, for all

leads, depth and heights as per drawings, specification and as directed by the Project Manager.

110mm outer dia.

247 As Per Above 785.00 Mtr. 707.00 Rupees Seven

75mm outer dia. Hundred Seven and

Zero Paisa Only

248 As Per Above 179.00 Mtr. 148.12 Rupees One

40mm Dia. Hundred Forty Eight

and Paisa Twelve

249 As Per Above 547.00 Mtr. 874.66 Rupees Eight

150mm Dia. Hundred Seventy

Four and Paisa Sixty

250 Providing, fixing, testing and commissioning uPVC Floor trap for 125mm dia including 125x125mm S S grating 147.00 Each 585.37 Rupees Five

with frame complete in all respects with necessary arrangements with proper care at all levels, protecting Hundred Eighty Five

fittings and floor trap till the final handing over etc as per technical specifications, drawings and directed by and Paisa Thirty

the Project Manager. Seven Only

251 Providing, Installing, testing and commisssioning UPVC Multi trap of self cleansing design with or without vent 175.00 Each 149.48 Rupees One

arm with provision for connecting upvc inlet fitttings complete including cost of cutting and making good the Hundred Forty Nine

walls and floors where ever required complete in all respects with necessary arrangements with proper care and Paisa Forty Eight

at all levels, protecting fittings and floor trap till the final handing over etc as per technical specifications, Only

drawings and directed by the Project Manager.

For 110 mm inlet and 110 mm oulet

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

252 Supply,Installing, testing and commisssioning 125mm dia Bronze Chrome plated ring and Grating with 2 37.00 Each 1,371.58 Rupees One

stainless steel screws, ring to be embedded in floor with sealant complete in all respects with necessary Thousand Three

arrangements with proper care at all levels, protecting fittings and floor trap till the final handing over etc as Hundred Seventy

per technical specifications, drawings and directed by the Project Manager. One and Paisa Fifty

253 Providing and fixing rain water "KHURRAS" size as per drawing required depth with lead flashing around 16.00 Each 1,523.08 Rupees One

rainwater pipe with one piece lead sheet of 3 mm thick set on a layer of cold bitumen. Including heavy duty Thousand Five

CI grating complete as required. Hundred Twenty

Three and Paisa

254 SANITARY AND CP FIXTURES 3.00 Each 3,661.25 Rupees Three

Providing and fixing water closet squattig pan (Indian type W.C. Pan) of Orissa – Eco Squatting Pans Hindware- Thousand Six

20070 equivalent make' superior colours including "P" trap, earthwork, bed concrete etc. complete as Hundred Sixty One

directed by EIC. and Paisa Twenty

255 Installing, testing and commisssioning vitreous china extended wall hung European type water closet with C.P. 46.00 Each 11,018.09 Rupees Eleven

bolts / rag bolts, nuts, C.I. chair or other hanging arrangement, solid plastic seat and cover, C.P. brass hinged, Thousand Eighteen

rubber buffers, including accessories, C.I / M.S. brackets painted with two coats of enamel paint of approved and Paisa Nine Only

shade over a coat of primer, C.P. brass screws and wooden cleats, including cutting and making good the

walls and floors wherever required as per technical specifications, drawings and directed by the Project

Manager. Location:-DOCTOR (Jaquar ARS-WHT-39951UFSM) Size:- 360 x 575 x 360mm Equivalent Make

256 Installing, testing and commisssioning vitreous china extended wall hung European type water closet with C.P. 32.00 Each 10,655.50 Rupees Ten

bolts / rag bolts, nuts, C.I. chair or other hanging arrangement, solid plastic seat and cover, C.P. brass hinged, Thousand Six

rubber buffers, including accessories, C.I / M.S. brackets painted with two coats of enamel paint of approved Hundred Fifty Five

shade over a coat of primer, C.P. brass screws and wooden cleats, including cutting and making good the and Paisa Fifty Only

walls and floors wherever required as per technical specifications, drawings and directed by the Project

Manager. Location:-VISITORS AND PATIENTS (jaquar FLS-WHT-5953UFSM) Size:-355x555x370 mm Equivalent

257 Installing, testing and commisssioning vitreous china extended wall hung European type water closet with C.P. 9.00 Each 18,285.04 Rupees Eighteen

bolts / rag bolts, nuts, C.I. chair or other hanging arrangement, solid plastic seat and cover, C.P. brass hinged, Thousand Two

rubber buffers, including accessories, C.I / M.S. brackets painted with two coats of enamel paint of approved Hundred Eighty Five

shade over a coat of primer, C.P. brass screws and wooden cleats, including cutting and making good the and Paisa Four Only

walls and floors wherever required as per technical specifications, drawings and directed by the Project

Manager. Location:-PH TOILET (jaquar DIS-WHT-93955P180UF) Size:-360x515x410 mm Equivalent Make

258 Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line 3.00 Each 607.01 Rupees Six Hundred

etc. complete.(iii) 32mm dia. Location:- ( Jaquar FLR-5083NK) Size:- 1 M Long Equivalent Make Seven and Paisa

259 Providing and fixing chromium plated brass health faucet of approved quality including fixing in pipe line etc. 32.00 Each 1,777.60 Rupees One

complete.(iii) 32mm dia. . Location:Visitors and Patient(Jaquar AD 565) Size:- Equivalent Make Thousand Seven

Hundred Seventy

Seven and Paisa

260 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including 51.00 Each 5,100.50 Rupees Five

sutting holes,Angle valve to Pillat tap connection pipe and making good the same but excluding fittings.(A) Thousand One

Vitreous China:(ii) Flat Back washbasin . (i) In white colour. Location:-DOCTOR (Jaquar ARS-WHT-39903) Size:- Hundred and Paisa

700 x 435 x 135 mm Equivalent Make Fifty Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

261 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including 9.00 Each 10,630.25 Rupees Ten

sutting holes,Angle valve to Pillat tap connection pipe and making good the same but excluding fittings.(A) Thousand Six

Vitreous China:(ii) Flat Back washbasin (i) In white colour. Location:- PH Toilet(Jaquar DIS -WHT-93801) Size:- Hundred Thirty and

650X565X155 mm Equivalent Make Paisa Twenty Five

262 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including 32.00 Each 5,437.84 Rupees Five

sutting holes,Angle valve to Pillat tap connection pipe and making good the same but excluding fittings.(A) Thousand Four

Vitreous China:(ii) Flat Back washbasin (i) In white colour.Location:- Visitor and Patient (Jaquar JDS -WHT-25503) Hundred Thirty Seven

Size:-510x450x175 mm Equivalent Make and Paisa Eighty

263 Providing and fixing C.P. brass waste for washbasin (B) 40mm dia. 92.00 Each 89.83 Rupees Eighty Nine

and Paisa Eighty

264 Providing and fixing chromium plated, Bottle trap with necessary couplings of approved quality for wash basin. 92.00 Each 295.80 Rupees Two

Hundred Ninety Five

and Paisa Eighty

265 Providing and fixing Pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 83.00 Each 2,860.32 Rupees Two

15mm dia. Location:- (Jaquar ARI-CHR-39233NK) Size:-Single lever wall basin Equivalent Make Thousand Eight

Hundred Sixty and

Paisa Thirty Two Only

266 Providing and fixing Pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 9.00 Each 4,445.01 Rupees Four

15mm dia. Location:-PH Toilet & Visitors and doctors (jaquar FLR-CHR-5001B) Size:-450mm Long or Equivalent Thousand Four

Make Hundred Forty Five

and Paisa One Only

267 Providing and fixing Sink Cock with Regular Swinging Spout (Wall Mounted Model) With Wall Flangecapstan 34.00 Each 2,544.19 Rupees Two

head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia. Location:-PH Toilet & Visitors Thousand Five

and doctors (jaquar ARI-CHR-39347S or Equivalent Make Hundred Forty Four

and Paisa Nineteen

268 Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal 17.00 Each 1,584.86 Rupees One

flush pipe.(A) white earthenware flat back type 340mm x 325mm x 625mm/650mm Location:-DOCTOR & Thousand Five

STUDENTS,VISITORS (URS-WHT-13263) Hundred Eighty Four

and Paisa Eighty Six

269 Providing&fixing 20mm thick of approved quality of green marble urinal partition insingle piece of size 10.00 Sqm 727.54 Rupees Seven

0.62x1.20mt. in cement mortar1:1(1cement:1coarsesand) and finishing with white cement including polishing Hundred Twenty

on bothsides,finishing edges with round shape of marble etc.complete. Seven and Paisa Fifty

270 PTMT - Urinal Spreader 15 mm 17.00 No. 47.87 Rupees Forty Seven

and Paisa Eighty

271 Providing and fixing Stainless steel A ISI 304 ( 18/8) kitchen sink ( NIRALI BRAND ) as per IS 13983 with CI brackets 18.00 Each 5,995.94 Rupees Five

and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls Thousand Nine

wherever required Kitchen sink with drain board 510 x 1040 mm bowl depth 225mm Hundred Ninety Five

and Paisa Ninety

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

272 Installing, testing and commisssioning Sink Mixer with Swinging Spout (Wall Mounted Model) With Connecting 18.00 Each 4,356.13 Rupees Four

Legs & Wall Flanges jaquar CON-CHR-309KNMmodel including cutting and making good the walls wherever Thousand Three

required as per technical specifications, drawings and directed by the Project Manager. Hundred Fifty Six and

Paisa Thirteen Only

273 Providing and fixing of STAINLESS STEEL MOP SINK deep supported CI/MS brackets (duly painted with 2 coats of 18.00 Each 6,565.00 Rupees Six

paint over a coat of primer) C.P. cast brass bottle trap with extension piece, rubber adopter, with tap, wall Thousand Five

flange, union, C.P. brass chain rubber plug complete as required. Hundred Sixty Five

and Zero Paisa Only

274 Providing and fixing of white viterous china Laboratory sink deep supported CI/MS brackets (duly painted with 16.00 Each 1,881.63 Rupees One

2 coats of paint over a coat of primer) C.P. cast brass bottle trap with extension piece, rubber adopter, with Thousand Eight

tap, wall flange, union, C.P. brass chain rubber plug complete as required. Hundred Eighty One

and Paisa Sixty Three

275 Supply,Fixing 15mm C.P brass Bib tap with C.P brass threaded flange complete, including cutting and making 59.00 Each 1,827.09 Rupees One

good the walls wherever required as per technical specifications, drawings and directed by the Project Thousand Eight

Manager. Location:-Patient and Visitors & PH Toilet (jaquar FLR -5047N) Equivalent make. Hundred Twenty

Seven and Paisa

276 Supply,Fixing 15mm C.P brass Bib tap with C.P brass threaded flange complete, including cutting and making 46.00 Each 2,022.02 Rupees Two

good the walls wherever required as per technical specifications, drawings and directed by the Project Thousand Twenty

Manager. Location:-Doctors (Jaquar ARI-39037 ) Two and Paisa Two

277 Providing and fixing P.V.C. low level flushing cistern 10 litre capacity with manually controlled device (handle 32.00 Each 950.02 Rupees Nine

lever) conforming to IS : 7231, with all fittings and fixtures complete as per technical specifications, drawings Hundred Fifty and

and directed by the Project Manager. Paisa Two Only

"Jaquar or equivalent make"

Location:-Visitors and patients , PH Toilet

278 Providing and fixing Concealed flushing Cistern Tank with flush plate complete in all respects as per technical 46.00 Each 8,642.57 Rupees Eight

specifications, drawings and directed by the Project Manager. "Jaquar Flush Plate JCP-CHR- 292415 & JCS Thousand Six

WHT-2400S or equivalent make" Hundred Forty Two

Location:- Doctors and Paisa Fifty Seven

279 Supply,Installing, testing and commisssioning 15mm C.P. brass angle valve with C.P copper connecting pipe 46.00 Each 739.32 Rupees Seven

450 mm long and nuts, washer with C.P. brass flange complete, including cutting and making good the walls, Hundred Thirty Nine

wherever required as per technical specifications, drawings and directed by the Project Manager. and Paisa Thirty Two

280 Supply,Installing, testing and commisssioning C.P single lever concealed diverter for bath and shower 21.00 Each 3,345.12 Rupees Three

complete with making good the walls & floor wherever required as per technical specifications, drawings and Thousand Three

directed by the Project Manager.(For Special Room) Single Lever Concealed Divertor ,Shower Head incl. Hundred Forty Five

shower arm,Bath spout 235 mm with wall flange and Paisa Twelve

281 FOR HANDICAPPED : Providing and fixing Medline Toilet Safety Rails, Safety Frame for Toilet with Easy 9.00 Each 4,807.60 Rupees Four

Installation, Height Adjustable Legs, Bathroom Safety for handicap toilet complete as recommended by the Thousand Eight

etc completed as directed by E.T.C/PMC . Hundred Seven and

Paisa Sixty Only

282 FOR HANDICAPPED : Providing and fixing entros SC7060H SC7060H 3-in-1 Raised Toilet Seat (Whte for handicap 9.00 Each 9,003.14 Rupees Nine

toilet as recommended by the etc completed as directed by E.T.C/PMC . Thousand Three and

Paisa Fourteen Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

283 FOR HANDICAPPED : Providing and fixing Brackets, Handle, tracks (Model R4140) with flexible feed & waste 9.00 Each 7,395.22 Rupees Seven

pipes for adjustable type wash basin complete as recommended, for handicap toilet etc completed as Thousand Three

directed by E.T.C/PMC . Hundred Ninety Five

and Paisa Twenty

284 Providing & fixing Toilet paper holder for toilet of approved quality, as recommended by theetc completed as 87.00 Each 427.99 Rupees Four

directed by E.T.C/PMC . Hundred Twenty

Seven and Paisa

Ninety Nine Only

285 Providing & fixing S.S. grade 304 Soap dish holder etc completed as directed by E.T.C/PMC . 92.00 Each 89.89 Rupees Eighty Nine

and Paisa Eighty

286 Providing & fixing liquid S.S. Soap dispencer etc completed as directed by E.T.C/PMC . 92.00 Each 1,569.54 Rupees One

Hundred Sixty Nine

and Paisa Fifty Four

287 Providing & fixing C.P. brass Double coat Hook complete.etc completed as directed by E.T.C/PMC . 147.00 Each 172.71 Rupees One

Hundred Seventy

Seventy One Only

288 Receiving, checking, storing & fixing CP brass / S.S. towel rod, 500 / 600 mm. long and 20 mm. dia., with 147.00 Each 616.42 Rupees Six Hundred

concealed type brackets fixed, to the wall with CP brass screws, etc. complete. Sixteen and Paisa

289 Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet 92.00 Each 851.13 Rupees Eight

or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers. Hundred Fifty One

and Paisa Thirteen

290 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with 25.00 Each 1,292.19 Rupees One

frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P Thousand Two

type. Hundred Ninety Two

and Paisa Nineteen

291 Providing Erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings 1,77,700.00 Litre 3.95 Rupees Three and

and connection etc. complete on terrace Paisa Ninety Five

292 Providing and fixing 'Jaquar or equivalent make' Ball cock of approved quality as directed. 5.00 Each 132.89 Rupees One

(A) Copper Metal (i) 25mm dia. Hundred Thirty Two

and Paisa Eighty

293 FIRE PLUMBING - Metre 4,358.93 Rupees Four -

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings Thousand Three

like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing Hundred Fifty Eight

cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling and Paisa Ninety

the trench etc. of following sizes complete as required. Three Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

294 Supply, Installation, Testing and Commissioning of the following sizes grooved fitted M.S. Pipes of Class C 550.70 Metre 2,851.69 Rupees Two

(Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, grooved Thousand Eight

tees / grooved elbows / grooved reducers / grooved couplings / grooved unions / grooved bends / flanges / Hundred Fifty One

gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and and Paisa Sixty Nine

two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications Only

complete as required.

295 Supply, Installation, Testing and Commissioning of the following sizes grooved fitted M.S. Pipes of Class C 582.00 Metre 2,038.63 Rupees Two

(Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, grooved Thousand Thirty Eight

tees / grooved elbows / grooved reducers / grooved couplings / grooved unions / grooved bends / flanges / and Paisa Sixty Three

gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and Only

two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications

complete as required.

296 Supply, Installation, Testing and Commissioning of the following sizes grooved fitted M.S. Pipes of Class C 467.06 Metre 1,504.04 Rupees One

(Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, grooved Thousand Five

tees / grooved elbows / grooved reducers / grooved couplings / grooved unions / grooved bends / flanges / Hundred Four and

gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and Paisa Four Only

two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications

complete as required.

297 Supply, Installation, Testing and Commissioning of the following sizes grooved fitted M.S. Pipes of Class C 245.00 Metre 1,287.81 Rupees One

(Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, grooved Thousand Two

tees / grooved elbows / grooved reducers / grooved couplings / grooved unions / grooved bends / flanges / Hundred Eighty

gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and Seven and Paisa

two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications Eighty One Only

complete as required.

298 Supply, Installation, Testing and Commissioning of the following sizes grooved fitted M.S. Pipes of Class C 315.00 Metre 1,022.11 Rupees One

(Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, grooved Thousand Twenty

tees / grooved elbows / grooved reducers / grooved couplings / grooved unions / grooved bends / flanges / Two and Paisa

gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and Eleven Only

two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications

complete as required.

299 Supply, Installation, Testing and Commissioning of the following sizes grooved fitted M.S. Pipes of Class C 280.00 Metre 825.03 Rupees Eight

(Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, grooved Hundred Twenty Five

tees / grooved elbows / grooved reducers / grooved couplings / grooved unions / grooved bends / flanges / and Paisa Three Only

gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and

two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications

complete as required.

300 Supply, Installation, Testing and Commissioning of the following sizes grooved fitted M.S. Pipes of Class C 245.00 Metre 679.01 Rupees Six Hundred

(Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, grooved Seventy Nine and

tees / grooved elbows / grooved reducers / grooved couplings / grooved unions / grooved bends / flanges / Paisa One Only

gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and

two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications

complete as required.

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

301 Supply, Installation, Testing and Commissioning of the following sizes grooved fitted M.S. Pipes of Class C 140.00 Metre 593.64 Rupees Five

(Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, grooved Hundred Ninety

tees / grooved elbows / grooved reducers / grooved couplings / grooved unions / grooved bends / flanges / Three and Paisa Sixty

gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and Four Only

two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications

complete as required.

302 Supply, Installation, Testing and commissioning of Y Strainer of CI Body flanged ends with stainless steel strainer 27.00 Each 8,891.80 Rupees Eight

304 having 1.2mm perforation complete with necessary accessories. Thousand Eight

a)150 mm dia. Hundred Ninety One

and Paisa Eighty

303 Supply, installation, testing and commissioning of Butterfly valve (With tampar Switch) with CI body SS disc 7.00 Each 13,774.38 Rupees Thirteen

nitrile sheet & O - ring & PN 16 pressure rating as specified. Thousand Seven

a) 100 mm dia. Hundred Seventy

Four and Paisa Thirty

304 Supply, installation, testing and commissioning of Butterfly valve (With tampar Switch) with CI body SS disc 32.00 Each 18,524.41 Rupees Eighteen

nitrile sheet & O - ring & PN 16 pressure rating as specified. Thousand Five

a) 150 mm dia. Hundred Twenty Four

and Paisa Forty One

305 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, 2.00 Each 11,682.05 Rupees Eleven

bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of Thousand Six

following sizes as required : Hundred Eighty Two

b) 100 mm dia. and Paisa Five Only

306 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, 21.00 Each 18,161.80 Rupees Eighteen

bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of Thousand One

following sizes as required : Hundred Sixty One

b) 150 mm dia. and Paisa Eighty

307 Supply, Installation, Testing and Commissioning of Non Return Valve with dual plate of CI body SS plates 27.00 Each 14,191.45 Rupees Fourteen

vulcanized NBR seal flanged end & PN 16 pressure rating as specified. Thousand One

b) 150 mm dia. Hundred Ninety One

and Paisa Forty Five

308 Inspectors test assembly 24.00 Each 7,010.51 Rupees Seven

Providing and fixing inspectors test assembly complete with alarm valve, test valve, sight glass sectional drain Thousand Ten and

valve, union with corrosion resistant orifice all complete strictly as per drawing and standard. Paisa Fifty One Only

309 Installation control valve assembly 3.00 Each 13,390.68 Rupees Thirteen

Supply, installation, testing and commissioning of UL/FM Approved installation control valve assembly with Thousand Three

vertical wet alarm valve with hydraulic alarm motor gong , 2 nos pressure gauges,test valves 50 mm drain Hundred Ninety and

valves with all necessary accessories. Paisa Sixty Eight Only

310 Supply, Installation, Testing and Commissioning of Air vessel, size of 250 mm dia., 8 mm thick M.S sheet, 1200 13.00 Each 14,556.89 Rupees Fourteen

mm in height with Air release valve on top and flanged connection to down comer, drain arrangement with Thousand Five

25 mm dia. valve, pressure gauge with required accessories and painting with synthetic enamel paint of Hundred Fifty Six and

approved shade as required. Paisa Eighty Nine

The vessel shall be suitable for working pressure 8 kg/cm², Hydro test at 12Kg/cm². Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

311 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel 44.00 Each 6,100.74 Rupees Six

coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Thousand One

Gunmetal/Stainless Steel cap and chain as required Hundred and Paisa

Single headed Gunmetal Seventy Four Only

312 Supply, Installation, Testing and Commissioning of Fire Hose Cabinet of size 750mmx600mx250mm fabricated 44.00 Each 6,206.25 Rupees Six

from 16 swg thick MS sheet with 6mm thick glazed hinged type centre opening doors having locking Thousand Two

arrangement suitable for accommodating 2 nos RRL hose pipes, 1 no. nozzle, branch pipe & painting with two Hundred Six and

coats of anti-corrosive primer and two coats of approved red enamel paint etc. complete as required. Paisa Twenty Five

313 Supply, installation, testing and commissioning 63 mm dia, 2x15 Meters. long RRL Hose Pipe with 63 mm dia male & female 44.00 Each 4,150.68 Rupees Four

gun metal couplings duly binded with GI wire, rivets etc. conforming to IS 636 (type-A - RRL) as required. Thousand One

Hundred Fifty and

Paisa Sixty Eight Only

314 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle 44.00 Each 1,927.73 Rupees One

conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Thousand Nine

Gun metal Hundred Twenty

Seven and Paisa

Seventy Three Only

315 Supply, installation, testing and commissioning of First- Aid Hose Reel equipment with M.S. construction spray 44.00 Each 9,633.05 Rupees Nine

painted in post office red, conforming to IS:884 with up to date amendments, complete with the following as Thousand Six

required. Hundred Thirty Three

(a) 36 m. long, 25 mm dia. water hose thermoplastic and Paisa Five Only

(Textile reinforced) Type-2 as per IS:12585.

(b) 25 mm dia gun metal globe valve & nozzle

(c) Drum and swinging type fixing brackets on the wall.

(d) Connections from riser with 25 mm dia. Gun metal ball valve.

316 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet 1.00 Each 5,379.44 Rupees Five

couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as Thousand Three

required :. Hundred Seventy

2 way-100 mm dia M.S. Pipe Nine and Paisa Forty

317 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet 1.00 Each 11,149.85 Rupees Eleven

couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as Thousand One

required :. Hundred Forty Nine

4 way - 150 mm dia M.S. Pipe and Paisa Eighty Five

318 Providing and fixing courtyard fire hydrants as per IS 59 Fire or Newage consisting of 63 mm dia, single outlet 20.00 Each 7,794.88 Rupees Seven

flanged oblique type hydrant valve with instantaneous female plunger type coupling, chained blank cap Thousand Seven

including making flanged joints by providing necessary nuts, bolts, gaskets (6 mm thick neoprene ) all Hundred Ninety Four

complete as suitable for 80 mm dia stand post. and Paisa Eighty

319 Providing and fixing standard fireman Axe with heavy duty insulated rubber handle as per IS: 926 with clamps. 44.00 Each 2,988.59 Rupees Two

Hundred Eighty Eight

and Paisa Fifty Nine

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

320 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. 6.00 Each 4,586.97 Rupees Four

complete (The tail pieces, tapers etc if required will be paid separately) : Thousand Five

50 mm dia Hundred Eighty Six

and Paisa Ninety

321 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree 1,050.00 Each 416.50 Rupees Four

centigrade with required accessories : Hundred Sixteen and

a) Pendent sprinkler 68°C Paisa Fifty Only

322 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree 1,050.00 Each 416.50 Rupees Four

centigrade with required accessories : Hundred Sixteen and

b) Upright Sprinkler Paisa Fifty Only

323 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree 140.00 Each 492.30 Rupees Four

centigrade with required accessories : Hundred Ninety Two

c) Horizontal side wall sprinkler and Paisa Thirty

324 Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed 350.00 Each 179.53 Rupees One

or FM approved complete as required. Hundred Seventy

Nine and Paisa Fifty

325 Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required. 24.00 Each 7,197.86 Rupees Seven

150mm dia Thousand One

Seven and Paisa

Eighty Six Only

326 Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working 4.00 Set 38,460.38 Rupees Thirty Eight

parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical Thousand Four

gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, Hundred Sixty and

emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control Paisa Thirty Eight

box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required. Only

327 Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps 35.00 Each 7,777.00 Rupees Seven

made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. Thousand Seven

a) 4.5 kg. Hundred Seventy

328 Supplying & erecting ABC powder type 'Ceasefire' type Fire extinguisher as per IS 13849 or 1 Kg capacity with 105.00 Each 5,999.40 Rupees Five

necessary clamp for erection on wall Thousand Nine

6 kg Hundred Ninety Nine

and Paisa Forty Only

329 Supplying & erecting D.C.P. type fire extinguisher for following capacity cartridge type with gun metal cap 150 105.00 Each 2,020.00 Rupees Two

gram CO2 gas cartridge, powder and brackets confirming to IS 2171 1985 and complete erected with Thousand Twenty

necessary clamps made from 50 x 6 mm M S Flat with nuts and bolts grouted in wall complete. and Zero Paisa Only

[A] For 5 Kg Capacity

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

330 Supplying, installing, testing and commissioning of GI sheet of 16gauge thickness Fire bucket with clean sand & 3.00 set 2,754.07 Rupees Two

stand in accordance with IS 2546. Fire bucket shall have two coats of anti corrosive paint, two coats of fire red Thousand Seven

paint on its outside & two coats of white paint on the inside. The word "FIRE" shall be clearly stencilled on it in Hundred Fifty Four

accordance with IS 2546. Vendor to include in his quote all costs relating to mounting of the bucket at and Paisa Seven

locations stated by the Fire NOC & the Architect/EIC. Vendor to include in his quote all costs all accessories, Only

consumables, fittings & rigging equipments necessary for the satisfactory installation of the same.(9 litres)

331 Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic 3.00 Set 2,94,476.17 Rupees Two Lakh

operation and consisting of following, complete in all Ninety Four

respects, as required : Thousand Four

(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless Hundred Seventy Six

steel shaft, mechanical seal conforming to IS 1520. and Paisa

(b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on Seventeen Only

415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-

'F' insulation, conforming to IS-325.

(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.

(d) Suitable cement concrete foundation duly plastered with anti vibration pads.

Note: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the

highest/farthest point.

2280 lpm at 70 m Head

332 Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic 2.00 Set 4,88,366.66 Rupees Four Lakh

operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal Eighty Eight

type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, Thousand Three

mechanical seal conforming to IS 1520. Hundred Sixty Six

Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete and Paisa Sixty Six

with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto Only

10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick

aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop

solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as

M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.

Suitable cement concrete foundation duly plastered and with anti vibration pads.

Note: * The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the

highest/farthest point.

2280 lpm at 70 m Head

333 Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic 3.00 Set 82,426.26 Rupees Eighty Two

operation and consisting of following, complete in all respects, as required : (Jockey Pump) Thousand Four

Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, Hundred Twenty Six

mechanical seal conforming to IS : 1520. and Paisa Twenty Six

Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC Only

supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation,

conforming to IS :

M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.

Suitable cement concrete foundation duly plastered and with anti vibration pads.

180 lpm at 70 m Head

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

334 Providing, supplying, installing, testing and commissioning of 15 mm dia BPSK water curtain nozzle, nickel 48.00 No 249.90 Rupees Two

chrome plated brass, with K-factor as per approved hydraulic design, including all necessary fittings and Hundred Forty Nine

accessories, complete as required. and Paisa Ninety

335 Providing, supplying, installing, testing and commissioning of deluge valve, 150 mm dia, complete with wet 2.00 No 67,732.14 Rupees Sixty Seven

pilot trim assembly, test and alarm arrangement, drip and drain valve, water motor gong and all necessary Thousand Seven

accessories, complete Hundred Thirty Two

and Paisa Fourteen

336 CONTROL PANELS :Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor 1.00 Each 4,59,359.81 Rupees Four Lakh

mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, Fifty Nine Thousand

powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper

Three Hundred Fifty

conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering

etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD Nine and Paisa

specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure Eighty One Only

protection class IP 42 as required

800A, 50kA 4 Pole MCCB, Ics=100% Icu Rating Digital Voltmeter 0-500V with selector switch Ammeter (0-800 A) with selector swtich

LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 1000Amps.

( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating

250 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 100 hp pump with overload protection,

current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation,

selector switch for local/remote, auto/manual/OFF operation. - 2 sets.

125 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current

sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector

switch for local/remote, auto/manual/OFF operation. - 2 sets

DIESEL ENGINE CONTROL

Control for diesel engine comprising -Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required,

push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on

indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A

DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller.

Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump,

diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation

window for fault indication, complete as per specification

337 Supply, Installation, Testing and Commissioning of 150 mm dia Pressure Gauge of range 0 - 15 Kg / cm² 5.00 Each 5,137.47 Rupees Five

conforming to IS - 3624 having bourdon tube of stainless steel 316 in cast aluminium, stove enameled, black, Thousand One

weather proof case with outer, screwed aluminium bezel and complete with necessary U-type stainless steel Hundred Thirty Seven

siphon tube and cock including providing suitably painted angle iron support to the tube etc.as per and Paisa Forty

specification complete as required. Seven Only

338 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size 5.00 Each 1,054.03 Rupees One

to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet Thousand Fifty Four

to the level of 3.5 kg/cm2 complete as required. and Paisa Three Only

339 INFRA 1,232.00 Cumt 106.81 Rupees One

Box cutting in road surface to proper slope and camber for making a base for road work including Removing Hundred Six and

the excavated stuff and depositing on the road side slope as directed up to 50 Mtr. Lead. Paisa Eighty Only

340 Consolidation of surface dressing in one coat with power roller including cost of fuel, hire charges of roller 2,633.00 Sqmt 5.72 Rupees Five and

etc.complete . Paisa Seventy One

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

341 Providing, laying and compacting clean sand ( CBR Not less than 10% ) Below sub base course including 279.00 Sqmt 620.14 Rupees Six Hundred

carriage of materials spreading in uniform layer manually on sprered base and compacted with vibratory Twenty and Paisa

roller to achive disired density including all materials, laboursetc. a complete. Fourteen Only

342 Construction of granular sub-base providing coarse graded machine crushed B.T. material satisfying MOST 395.00 Cumt 802.95 Rupees Eight

specification of grading ll (B.T. stone aggregate 26.5 to 4.75mm -75% and 2.36mm below -25%) including Hundred Two and

spreading in uniform layer with motor grader on prepared surface, mixing by mix in place method with Paisa Ninety Five

rotavator at OMC and compacting with vibratory roller to achieve the desired density etc, complete. Only

343 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification 77.00 Cumt 1,037.27 Rupees One

including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by Thousand Thirty

tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and Seven and Paisa

compacting with vibratory roller to achieve the desired density. Twenty Seven Only

344 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 80mm thick with grade of 773.00 Sqmt 704.07 Rupees Seven

concrete M35 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS Hundred Four and

15658 : 2006 including 40mm Sand layer for levelling and filling the joint with sand in proper line and level as per Paisa Seven Only

guidlines of IRC : SP 63- 2018 etc. Complete.

345 Paintinglines,dashes,arrows,letters etc on road,air fields and like in two coats with road markingpain,brushing 1,140.00 Rmt 13.22 Rupees Thirteen and

including cleaning the surface of all dirts ,dust and other foreign matter Paisa Twenty Two

(I) Over 10 cm in width Only

346 Providing and fixing precast concrete kerb stone pf gray cement based concrete block 30 cm length, 30 cm 450.00 Rmt 370.68 Rupees Three

height and 15 cm thick of M250 grade concrete as per approved design and including excavation for fixing in Hundred Seventy

proper line and level filling the joint with C:M 1 : 3 (1 Cement :3 fine sand ) etc complete. and Paisa Sixty Eight

347 Providing and supplying D. I. K-9 grade pipes for following nominal bore diameter with internal cement mortar 110.00 Rmt 1,127.00 Rupees One

lining including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, Thousand One

unloading, conveyance to departmental stores, stacking etc. complete. (IS 8329-2000). Rate for DI pipe based Hundred Twenty

on Wholesale Price index of Pig Iron as 124.6 for the month of Febuaury-2021. For sewerage project cement Seven and Zero

mortor lining shall be with sulphate resistance cement Paisa Only

100 mm dia pipe

348 Lowering, laying and jointing C. I. S & S Spun pipes suitable for Tyton joints / Mortar lined D. I. Pipes of various 110.00 Rmt 63.25 Rupees Sixty Three

classes with CI / MS specials of following diameters in proper position, grade and alignment as directed by and Paisa Twenty

Engineer-in-charge including hydraulic testing etc. comp. Five Only

100 mm dia pipe

349 Providing and supplying in standard length ISI mark high density Polyethylene H.D.P.E. Pipes suitable for 126.00 Rmt 182.00 Rupees One

potable water as per IS specification no. 4984/1995 including all local and central taxes, transportation, freight Hundred Eighty Two

charges, octroi, inspection charges, loading, unloading, conveyance to the dept. stores etc. comp. and Zero Paisa Only

350 Lowering, laying and jointing HDPE pipes and specials of following class and diameter (By butt fusion welding 126.00 Rmt 8.05 Rupees Eight and

method) including cost of conveyance from stores to site of works at all level including cost of labour, Paisa Five Only

material, giving satisfactory hydraulic testing etc. comp.

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

351 Providing and supplying in standard length ISI mark high density Polyethylene H.D.P.E. Pipes suitable for 80.00 Rmt 81.00 Rupees Eighty One

potable water as per IS specification no. 4984/1995 including all local and central taxes, transportation, freight and Zero Paisa Only

charges, octroi, inspection charges, loading, unloading, conveyance to the dept. stores etc. comp.

352 Lowering, laying and jointing HDPE pipes and specials of following class and diameter (By butt fusion welding 80.00 Rmt 4.60 Rupees Four and

method) including cost of conveyance from stores to site of works at all level including cost of labour, Paisa Sixty Only

material, giving satisfactory hydraulic testing etc. comp.

353 Providing, supplying and fixing ISI mark CI Sluice/Control valves PN 1.6 at site of work tested to specified test 4.00 No. 3,398.70 Rupees Three

pressure including all taxes, octroi, insurance, transportation, freight charges, loading, unloading stacking etc. Thousand Three

complete and all labour charges of lowering, laying, jointing in position including cost of jointing materials, nut- Hundred Ninety Eight

bolts and giving satisfactory hydraulic testing etc. complete. and Paisa Seventy

A12) PN-1.6 with gear operated ( Alt-1 type long body ) Only

354 Providing, supplying and fixing ISI mark CI Sluice/Control valves PN 1.6 at site of work tested to specified test 2.00 No. 4,094.00 Rupees Four

pressure including all taxes, octroi, insurance, transportation, freight charges, loading, unloading stacking etc. Thousand Ninety

complete and all labour charges of lowering, laying, jointing in position including cost of jointing materials, nut- Four and Zero Paisa

bolts and giving satisfactory hydraulic testing etc. complete. Only

A12) PN-1.6 with gear operated ( Alt-1 type long body )

355 Providing, supplying and fixing ISI mark CI Sluice/Control valves PN 1.6 at site of work tested to specified test 2.00 No. 5,504.85 Rupees Five

pressure including all taxes, octroi, insurance, transportation, freight charges, loading, unloading stacking etc. Thousand Five

complete and all labour charges of lowering, laying, jointing in position including cost of jointing materials, nut- Hundred Four and

bolts and giving satisfactory hydraulic testing etc. complete. Paisa Eighty Five

A12) PN-1.6 with gear operated ( Alt-1 type long body ) Only

356 Providing, supplying and fixing ISI mark Reflux/Non Return valves at site of work tested to specified test pressure 2.00 No. 6,067.85 Rupees Six

including all taxes, octroi, insurance, transportation, freight charges, loading, unloading stacking etc. Thousand Sixty

complete and all labour charges of lowering, laying, jointing in position including cost of jointing materials, nut- Seven and Paisa

bolts and giving satisfactory hydraulic testing etc. complete. Eighty Five Only

Reflux valves PN 1.6 IS 5312 with ISI mark

357 Providing, supplying and fixing ISI mark Reflux/Non Return valves at site of work tested to specified test 2.00 No. 4,567.00 Rupees Four

pressure including all taxes, octroi, insurance, transportation, freight charges, loading, unloading stacking etc. Thousand Five

complete and all labour charges of lowering, laying, jointing in position including cost of jointing materials, nut- Hundred Sixty Seven

bolts and giving satisfactory hydraulic testing etc. complete. and Zero Paisa Only

Reflux valves PN 1.6 IS 5312 with ISI mark

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

358 Construction of valves chamber in brick or stone masonry, locally available in C.M 1:6,foundation concrete 18.00 No.. 2,954.35 Rupees Two

150 mm thick in C.C. 1:4:8 of trap metal size 25 mm to 40 mm thick, inside cement plaster in C.M 1:3, and Thousand Nine

cement pointing outside in C.M 1:3 etc. complete as given size. Upto 1 mt depth from G.L. to pipe invert Hundred Fifty Four

level incl. complete civil works but excluding cost of excavation and refilling. and Paisa Thirty Five

With fixing of CI-MH frame and cover (Excluding cost of CI-MH frame and cover ) Only

(a) Size of 0.30 m x 0.30 m and 1.0 m deep

with single piece 10 cm with fixing M. H. cover

359 Providing and supplying Cast iron Manhole Frame & Cover ( All type ) for water supply. 1,545.00 Kg 66.70 Rupees Sixty Six and

Paisa Seventy Only

360 Fixing all types of C.I. Frame and cover in C.C.1:2:4 including carting etc. complete excluding cost of R.C.C. 21.00 No. 320.85 Rupees Three

and Paisa Eighty Five

361 Providing C.I. cowl type ventilator with air filter and jali etc. comp. All dia size 240.00 Kg 58.00 Rupees Fifty Eight

and Zero Paisa Only

362 Providing and fixing depth gauge painted on teak wood planks 25 mm/M.S plate 4mm thick with float level 3.00 No 6,348.00 Rupees Six

indicator sliding wire on standard pullies incl. necessary arrangement to prevent the swinging etc. comp. with Thousand Three

calibration upto 5 mt. height Hundred Forty Eight

and Zero Paisa Only

363 Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting Cement) in standard lengths of 71.00 Rmt 331.00 Rupees Three

following class and diameter suitable for either collar joints or rubber ring joints including all taxes, insurance, Hundred Thirty One

transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental and Zero Paisa Only

stores, stacking etc. complete. (IS - 458/ 1989)

Note : One collar should be supplied with each full length plain ended RCC pipe, cost included in rates below.

One rubber ring should be supplied with each full length socketed pipe, cost included in rates below.

Class NP3 Test pressure 0.7 Kg/sq.cm

364 Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting Cement) in standard lengths of 231.00 Rmt 417.00 Rupees Four

following class and diameter suitable for either collar joints or rubber ring joints including all taxes, insurance, Hundred Seventeen

transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental and Zero Paisa Only

stores, stacking etc. complete. (IS - 458/ 1989)

Note : One collar should be supplied with each full length plain ended RCC pipe, cost included in rates below.

One rubber ring should be supplied with each full length socketed pipe, cost included in rates below.

Class NP3 Test pressure 0.7 Kg/sq.cm

365 Lowering, laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of following diameters in proper position,grade and 71.00 Rmt 72.45 Rupees Seventy Two

alignment as directed by Engineer-in-charge including conveyance from stores to site of work,labour, giving and Paisa Forty Five

hydraulic testing as per ISI code. Only

Class NP3 Test pressure 0.7 Kg/sq.cm

366 Lowering, laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of following diameters in proper position,grade and 231.00 Rmt 101.20 Rupees One

alignment as directed by Engineer-in-charge including conveyance from stores to site of work,labour, giving Hundred One and

hydraulic testing as per ISI code. Paisa Twenty Only

Class NP3 Test pressure 0.7 Kg/sq.cm

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

367 Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts including 131.00 Rmt 2,108.86 Rupees Two

setting and joining the pipes in C.M. 1:2 watering and laying (To level of slops of I.S. 458 / 1971 Class NP3 casted Thousand One

by vertically vibrated technology of following internal diameter. (vii) 600 mm dia. Hundred Eight and

Paisa Eighty Five

368 Providing & constructing sewer manholes, scraper manholes & unit house connection chamber, as per the 16.00 No. 14,005.85 Rupees Fourteen

type design in brick masonary in CM 1:3 & out side plaster in CM 1:3 necessary coping in RCC M20, fixing CI Thousand Five and

steps & fixing manhole frame & covers. (but excluding supply of manhole frame & covers) over manholes & Paisa Eighty Five

house connections, chambers & fixing manhole covers (but excluding supply of manhole covers) over scraper Only

manholes etc. complete, providing & fixing safety chain wherever necessary as per the stipulation in the type

design complete (excl. excavation)

Manhole type "A" circular type having inside dia of minimum 900 mm & for depth from 1.0 m to 1.5 m (for

mm to 500 mm dia. Sewer pipe)

Manhole type "A" as above but upto 1.00 m depth

369 Extra depth beyond 1.00 m but upto 1.50 m depth for "A" type manhole above. 6.00 Mtr 7,622.20 Rupees Seven

Hundred Twenty Two

and Paisa Twenty

370 Manhole type "B" circular type having inside dia of minimum 1500 mm & for depth from 1.5 m to 4.00 m (for 150 5.00 No. 24,283.40 Rupees Twenty Four

mm to 600 mm dia. Sewer pipe) Thousand Two

Manhole type "B" as above but upto 1.50 m depth Hundred Eighty

Three and Paisa

371 Extra depth beyond 1.50 m but upto 4.00 m depth for "B" type manhole above. 1.50 Mtr 14,159.95 Rupees Fourteen

Hundred Fifty Nine

and Paisa Ninety

372 RCC precast MH frame & cover manufacture, supply & delivery at store or at site of work precast RCC M 200 13.00 No. 1,121.00 Rupees One

frame & cover suitable to drainage MH & as per type design & drawing including cost of reinforcement, MS Thousand One

angle or flat, curing mold work, etc. Hundred Twenty

R.C.C. covers Heavy Duty One and Zero Paisa

Frame suitable for 50 cm opening of MH Only

373 Cover suitable for 50 cm opening of MH 13.00 No. 1,173.00 Rupees One

Hundred Seventy

374 Constructing brick masonary chamber for underground C.I Inspection chamber and bends with bricks having 17.00 No. 2,932.93 Rupees Two

crushing stregth not less then 35 kg/cm2 in c:m 1 :5 C.I. cover with frame (light duty) 455 mm x 610 mm internal Thousand Nine

dimensions total weight of cover with frame to be not less than 38 Kg .(wt. of cover 23 Kg.) and wt.of frame Hundred Thirty Two

15 Kg. ) ( R.C.C. top slabe with 1:2:4 mix ( 1: cement :2 coarse sand : 4 graded stone aggregate 20 mm size) and Paisa Ninety

foundation concrete 1:5:10 in side plaster 15 mm thick with cement mortar 1:3 finished smooth with a floating Two Only

coat of neat cement on walls and bed concrete etc. complete. (i) in side dimensions 455mm x 610 mm and

450 mm deep for single pipe line

375 Providing and fixing S.W. gully trap with C.I. grating brick masonary chamber and water tight C.I. cover with 28.00 No. 1,246.92 Rupees One

frame of 300 mm x 300 mm size (Inside) with standard weight (I) Square mouth traps (B) 150 mm x 100 mm Thousand Two

size P or R type Hundred Forty Six

and Paisa Ninety

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

376 Excavation in any soil upto 30 cm. depth, bracking clods, removing unwanted stuff such as brick bats, stones, 113.00 Cumt 94.33 Rupees Ninety Four

grass roots etc. refilling the same, preplanting watering top-digging, relevelling and bringing the earth to fine and Paisa Thirty

tilth ready for sowing or planting. Three Only

377 Providing Loam or Clay soil of approval quality on site.) 113.00 Cumt 146.40 Rupees One

Hundred Forty Six

and Paisa Thirty Nine

378 Labour for spreading and mixing loam or clay soil or river silt evenly over excavated area and levelling the 113.00 Cumt 75.47 Rupees Seventy Five

same after clods etc. (Rate for one Cu. m. of soil) and Paisa Forty Six

379 Providing Farm yard Manure of approved quality on site 28.00 Cumt 331.80 Rupees Three

Hundred Thirty One

and Paisa Seventy

380 Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in 85.00 Cumt 520.76 Rupees Five

stacks will be reduced by 20% for payment). Hundred Twenty

and Paisa Seventy

381 Mixing and Filling of mix of manure and good earth in proportion of 1:3 (1 part manure and 3 part sweet earth) 113.00 Cumt 89.79 Rupees Eighty Nine

in required thickness including proper dressing, leveling, rolling, watering and compacting as per the levels and Paisa Seventy

specified in the drawings as approved by Engineer-in-Charge (cost of manure or/and good earth to be paid Eight Only

382 Providing pure doob (Dharo) grass suckers and planting the same at a distance of 8 to 10 Cm. both ways and 375.00 Sqmt 50.50 Rupees Fifty and

maintaining the same till well established ( about 45 days) Paisa Fifty Only

383 Providing well grown seedings of annuals of specified varities and planting the same at suitable distance as 150.00 Sqmt 18.94 Rupees Eighteen

directed and maintaining the same till well established. and Paisa Ninety

( about 45 days ) Three Only

384 Providing bulbs of choice Canna varieties and planting the same at a distance of 60 cm x 60 Cm and 175.00 Sqmt 76.72 Rupees Seventy Six

maintaining till well established (about 45 days). and Paisa Seventy

385 Providing cuttings of clerodendron and planting the same in two rows in 30 cm width roughly at a distance of 110.00 Sqmt 9.44 Rupees Nine and

18 Cm x 18 Cm and maintaining till well established ( about 45 days ). Paisa Forty Four Only

386 Providing well grown shrubs of specified species and planting the same as distance of roughly 1.5 M x 1.5 M 350.00 No. 202.00 Rupees Two

and maintaining the same till well established ( about 45 days ). Hundred Two and

Zero Paisa Only

387 Providing, supplying, planting & developing of following Trees / Plants etc. in required patterns, removing 15.00 No. 606.00 Rupees Six Hundred

unwanted elements/ weeds, mixing of new soil & fertilizers, Treatment for unwanted weeds, cleaning, watering Six and Zero Paisa

& periodically spraying of fertilizer incl. cost of transportation, fertilizer, labours etc. & maintaing the Trees / Only

Plants for 24 months in all respects. The height of trees at the time of planting shall be 45 to 60 cms . Neem

,Plumeria obtusa, Assopalav, Bottle palm, Canocarpus, Mimosops elengi, Gulmahor Champo, Borsalli in equal

388 Laying out Lawn : After excavating soil upto 30 cm depth , preparing soil for planting by supplying and mixing 375.00 Sqmt 72.62 Rupees Seventy Two

pepairing soil for planting by supplying and mixing Farm Yard Manure at the rate of 5 cu. m. per 100 Sq. Mt. and Paisa Sixty One

area , providing and planting suckers of pure dharo ( doob ) grass roughly at 10 cm x 10 cm distance and Only

maintaining till well established etc complete ( about 45 days ).

389 Raising Shrubbery : after excavating soil upto 30 cm. preparing soil for planting by supplying and mixing farm 70.00 No. 81.36 Rupees Eighty One

Yard Manure at the rate of 5 cu. m. per 100 sq.m. area, providing and planting well grown shrubs of specified and Paisa Thirty Five

species roughly at 1.5 m x 1.5 m distance and maintaining till well established ( about 45 days ) complete. Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

390 Designing, Providing and Supplying Drip Irrigation System capable of watering the Housing site admeasuring 375.00 Sqmt 70.70 Rupees Seventy

approx. 5 H consisting of the following works (The design of entire system shall be got approved before and Paisa Seventy

execution) :(i) Designing, providing and installing Hydro pneumatic system (pressure pump) so as to supply Only

water to the entire site (The system shall be installed based on the tank at Central Service Yard).ii) Desiging,

zoning of the entire site so as to minimise power consumption and water losses.iii) Providing, supplying and

fixing adequate numbers of control valves so as to maintain and support the zoning as described above.iv)

Providing, supplying & laying 20 to 75 mm HDPEpressure pipe (4kg / cm2) in the entire site as required for

watering the plants, lawns etc. without disturbing permanent strucutres and pucca roads v) Providing,

Supplying and laying 15-35 mm dia PVC flexible pipe to water the hedges, shrubs, shaded trees etc.vi)

Providing, Supplying and laying 5mm dia PVC drip at all large trees as per requirement in design.vii) Providing,

supplying and laying Pop-up which can cover 6.00 m. radially. The layout of pop-up shall be so designed, so

that the flow from the adjoining pop-ups shall over lap each other by atleast 3.00 m.at all required

locations.viii) Providing, Supply and laying sprinkler with a capacity to cover 6.00 m radially at all required

locations.ix) Providing, Supplying and installing fertilizer mixing and distribution system by providing a 200 ltr.

capacityvalves so as prepare dose of required mix and allow mixing to the distribution system.Commissioning

the entire system.

391 Maintenance of the entire campus and developed garden, trees included lawn grass, trees, shrubs, hedge, 12.00 Month 10,100.00 Rupees Ten

indoor plants etc. Maintenance period shall be 12 months. The maintenance shall include daily watering, Thousand One

spraying of insecticides, trimming, cutting, mowing, sweeping and cleaning of garden areas, replenishment of Hundred and Zero

dead plants ( free of cost) and replanting of seasonal flower beds and maintenance there of including cost of Paisa Only

tools, equipment’s, hosepipes, movers etc. all complete. For this work the contractor will have to deploy

sufficient no. of skilled and unskilled labour with adequate supervision by a qualified and experienced

supervisor and all this will be included in the rate quoted.

The maintenance will also include maintenance of Drip Irrigation System.

392 Supplying and erecting and commissioning SUBMERCIBLE PUMP capable of discharging 542 lit / minute 2.00 No. 34,296.45 Rupees Thirty Four

against a total head of 25.08 M driven by electrical motor as specified after reaching exact depth of bore Thousand Two

with tools,lubricator etc. comp. as directed. (4.02 Hp) Hundred Ninety Six

and Paisa Forty Five

393 Supplying and erecting and commissioning SUBMERCIBLE PUMP capable of discharging 115 lit / minute 2.00 No. 26,275.20 Rupees Twenty Six

against a total head of 25.08 M driven by electrical motor as specified after reaching exact depth of bore Thousand Two

with tools,lubricator etc. comp. as directed. (0.85 Hp) Hundred Seventy

394 CCSD 1.00 No. 18,00,000.00 Rupees Eighteen

CENTRAL STERILE SERVICE DEPARTMENT Lakh and Zero Paisa

Supply Installation Testing and Commissioning of Automatic Double Door Steam Sterilizer 250–400 L, double- Only

door, vacuum drying, PLC control Or More and should comply with EN ISO 15883-1 as per tender specification

and as Direcited by Engineer in Charge.

395 Supply Installation Testing and Commissioning of Inside Cart (Platform) as per accomodation of the Sterilizer 1.00 No. 2,43,000.00 Rupees Two Lakh

should have ISO 9001:2008 and ISO 13485:2003 - as per tender specification and as Direcited by Engineer in Forty Three Thousand

Charge. and Zero Paisa Only

396 Supply Installation Testing and Commissioning of Dirty/Sterile Reception Trolley for Loading/Unloading from 1.00 No. 1,58,000.00 Rupees One Lakh

Steriliser L 200 x W 60 cm as per tender specification and as Direcited by Engineer in Charge. Fifty Eight Thousand

and Zero Paisa Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

397 Supply Installation Testing and Commissioning of Stainless Steel Baskets 1 STE as per tender specification and as 4.00 No. 10,500.00 Rupees Ten

Direcited by Engineer in Charge. Thousand Five

Hundred and Zero

398 Supply Installation Testing and Commissioning of Double Door Turbo Fast Cycle Washer Disinfector with Vertical 1.00 No. 24,00,000.00 Rupees Twenty Four

Automatic Door Opening of Capacity 250 L, 8–10 DIN trays, standard automatic model as per tender Lakh and Zero Paisa

specification and as Direcited by Engineer in Charge. Only

399 Supply Installation Testing and Commissioning of Loading Cart for Washer Disinfector as per tender 1.00 No. 1,55,000.00 Rupees One Lakh

specification and as Direcited by Engineer in Charge. Fifty Five Thousand

and Zero Paisa Only

400 Supply Installation Testing and Commissioning of Microprocessor Controlled Double Chamber Ultrasonic Wave 1.00 No. 3,05,000.00 Rupees Three Lakh

cleaning sytem with Spray gun for irrigation, and other for flushing, dewatering and drying as per tender Five Thousand and

specification and as Direcited by Engineer in Charge. Zero Paisa Only

401 Supply Installation Testing and Commissioning of Microprocessor Controlled Digital Menu Operated Rotary 1.00 No. 3,15,000.00 Rupees Three Lakh

Heat Sealer as per tender specification and as Direcited by Engineer in Charge. Fifteen Thousand

and Zero Paisa Only

402 Supply Installation Testing and Commissioning of Multi-Roll Tape Dispenser of the same make as CSSD 1.00 No. 85,000.00 Rupees Eighty Five

equipment as per tender specification and as Direcited by Engineer in Charge. Thousand and Zero

403 Supply Installation Testing and Commissioning of Gauze Cutting Machine of the same make as CSSD 1.00 No. 28,000.00 Rupees Twenty Eight

equipment as per tender specification and as Direcited by Engineer in Charge. Thousand and Zero

404 Supply Installation Testing and Commissioning of Double Door H2O2 Plasma Sterilizer for Low Temaprature 1.00 No. 42,00,000.00 Rupees Forty Two

Sterilization with Vertical Automatic Door Opening with TCV 130 Litres as per tender specification and as Lakh and Zero Paisa

Direcited by Engineer in Charge. Only

405 Supply Installation Testing and Commissioning of Working Table with cabinet with Shelf and Lock 140 x 60 x 87 2.00 No. 68,000.00 Rupees Sixty Eight

cm of the same make as CSSD equipment as per tender specification and as Direcited by Engineer in Charge. Thousand and Zero

406 Supply Installation Testing and Commissioning of Working Table with two sinks of the same make as CSSD 1.00 No. 82,500.00 Rupees Eighty Two

equipment as per tender specification and as Direcited by Engineer in Charge. Thousand Five

Hundred and Zero

407 Supply Installation Testing and Commissioning of Working Table with cabinet with Shelf and Lock 180 x 60 x 87 1.00 No. 92,000.00 Rupees Ninety Two

cm of the same make as CSSD equipment as per tender specification and as Direcited by Engineer in Thousand and Zero

Charge. Paisa Only

408 Supply Installation Testing and Commissioning of Washer Gun type Hydro Chem for Carts Cleaning of the same 1.00 No. 50,800.00 Rupees Fifty

make as CSSD equipment as per tender specification and as Direcited by Engineer in Charge. Thousand Eight

Hundred and Zero

409 Supply Installation Testing and Commissioning of 3 Level Shelf of Dimensions 90 x 60 x 170 cm of the same make 1.00 No. 35,500.00 Rupees Thirty Five

as CSSD equipment as per tender specification and as Direcited by Engineer in Charge. Thousand Five

Hundred and Zero

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

410 Supply Installation Testing and Commissioning of Drying Gun for Carts drying of the same make as CSSD 1.00 No. 18,254.00 Rupees Eighteen

equipment as per tender specification and as Direcited by Engineer in Charge. Thousand Two

Hundred Fifty Four

and Zero Paisa Only

411 Supply Installation Testing and Commissioning of Floor Cabinet with full doors 60 x 50 x 200 cm of the same 1.00 No. 92,500.00 Rupees Ninety Two

make as CSSD equipment as per tender specification and as Direcited by Engineer in Charge. Thousand Five

Hundred and Zero

412 Supply Installation Testing and Commissioning of Working Table (200 x 60 x 87 cm) with Upright partition with 1.00 No. 81,250.00 Rupees Eighty One

two shelves, lighting and electrical sockets of the same make as CSSD equipment as per tender specification Thousand Two

and as Direcited by Engineer in Charge. Hundred Fifty and

Zero Paisa Only

413 Supply Installation Testing and Commissioning of Working Table (140 x 90 x 87 cm) for sealing with two baskets 1.00 No. 78,500.00 Rupees Seventy

of the same make as CSSD equipment as per tender specification and as Direcited by Engineer in Charge. Eight Thousand Five

Hundred and Zero

414 Supply Installation Testing and Commissioning of Working Table (140 x 90 x 87 cm) for bed linen and clothes of 1.00 No. 35,200.00 Rupees Thirty Five

the same make as CSSD equipment as per tender specification and as Direcited by Engineer in Charge. Thousand Two

Hundred and Zero

415 Supply Installation Testing and Commissioning of Illuminated Table (140 x 90 x 87 cm) for Control and Packing 1.00 No. 45,700.00 Rupees Forty Five

of the same make as CSSD equipment as per tender specification and as Direcited by Engineer in Charge. Thousand Seven

Hundred and Zero

416 Supply Installation Testing and Commissioning of Racks with Hooks of the same make as CSSD equipment as 1.00 No. 14,500.00 Rupees Fourteen

per tender specification and as Direcited by Engineer in Charge. Thousand Five

Hundred and Zero

417 Supply Installation Testing and Commissioning of Hermetically Sealed / Airtight Pass Through Window for Sterile 1.00 No. 16,500.00 Rupees Sixteen

Goods Output of the same make as CSSD equipment as per tender specification and as Direcited by Engineer Thousand Five

in Charge. Hundred and Zero

418 Supply Installation Testing and Commissioning of Storage Rack with Five Perforated Shelves H 175 X W 120 X D 2.00 No. 65,250.00 Rupees Sixty Five

60 cm of the same make as CSSD equipment as per tender specification and as Direcited by Engineer in Thousand Two

Charge. Hundred Fifty and

Zero Paisa Only

419 Supply Installation Testing and Commissioning of Working Table with cabinet with Shelf and Lock 120 x 60 x 87 2.00 No. 59,500.00 Rupees Fifty Nine

cm of the same make as CSSD equipment as per tender specification and as Direcited by Engineer in Charge. Thousand Five

Hundred and Zero

420 Supply Installation Testing and Commissioning of Sterile Goods Transport Trolley of the same make as CSSD 1.00 No. 55,000.00 Rupees Fifty Five

equipment as per tender specification and as Direcited by Engineer in Charge. Thousand and Zero

421 Supply Installation Testing and Commissioning of Transport Trolley L90 x W 60 cm of the same make as CSSD 1.00 No. 58,250.00 Rupees Fifty Eight

equipment as per tender specification and as Direcited by Engineer in Charge. Thousand Two

Hundred Fifty and

Zero Paisa Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

422 Supply Installation Testing and Commissioning of Paper Storage Cart of the same make as CSSD equipment as 2.00 No. 56,500.00 Rupees Fifty Six

per tender specification and as Direcited by Engineer in Charge. Thousand Five

Hundred and Zero

423 MGPS 20.00 MTRS 4,350.07 Rupees Four

Medical Grade Copper Pipe : 54mm OD X 1.2mm thick Thousand Three

Hundred Fifty and

Paisa Seven Only

424 Medical Grade Copper Pipe : 42mm OD X 1.2mm thick 28.00 MTRS 3,039.09 Rupees Three

Thousand Thirty Nine

and Paisa Nine Only

425 Medical Grade Copper Pipe : 28mm OD X 0.9mm thick 170.00 MTRS 1,489.75 Rupees One

Hundred Eighty Nine

and Paisa Seventy

426 Medical Grade Copper Pipe : 22mm OD X 0.9mm thick 390.00 MTRS 1,132.21 Rupees One

Hundred Thirty Two

and Paisa Twenty

427 Medical Grade Copper Pipe : 15mm OD X 0.7mm 830.00 MTRS 774.67 Rupees Seven

thick Hundred Seventy

Four and Paisa Sixty

428 Medical Grade Copper Pipe : 12mm OD X 0.6mm thick 190.00 MTRS 631.65 Rupees Six Hundred

Thirty One and Paisa

Sixty Five Only

429 SITC of Gas Outlet Points/ Terminal Unit : Oxygen , As per tender technical specifications HTM 02-01 , DIN, ISO- 55.00 NOS 8,193.63 Rupees Eight

7396-1, NFPA -99 latest edition Thousand One

Three and Paisa Sixty

430 Gas Outlet Points/ Terminal Unit : As per tender technical specifications . Nitrous Oxide 5.00 NOS 7,575.00 Rupees Seven

Hundred Seventy

Five and Zero Paisa

431 Gas Outlet Points/ Terminal Unit : As per tender technical specifications Medical Air 4 Bar 35.00 NOS 7,575.00 Rupees Seven

Hundred Seventy

Five and Zero Paisa

432 Gas Outlet Points/ Terminal Unit : As per tender technical specifications Surgical Air 7 Bar 4.00 NOS 7,575.00 Rupees Seven

Hundred Seventy

Five and Zero Paisa

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

433 Gas Outlet Points/ Terminal Unit : As per tender technical specifications Vacuum 45.00 NOS 7,575.00 Rupees Seven

Hundred Seventy

Five and Zero Paisa

434 Gas Outlet Points/ Terminal Unit : As per tender technical specifications AGSS 2.00 NOS 11,304.22 Rupees Eleven

Hundred Four and

Paisa Twenty Two

435 SITC of Matching Probe/Adopter - Oxygen, As per tender technical specifications HTM 02-01 , DIN, ISO-7396-1, 48.00 NOS 1,489.75 Rupees One

NFPA -99 latest edition Thousand Four

Hundred Eighty Nine

and Paisa Seventy

436 Matching Probe/adopter As per tender technical specifications Nitrous Oxide 4.00 NOS 1,489.75 Rupees One

Hundred Eighty Nine

and Paisa Seventy

437 Matching Probe/adopter As per tender technical specifications Medical Air 4 Bar 27.00 NOS 1,489.75 Rupees One

Hundred Eighty Nine

and Paisa Seventy

438 Matching Probe/adopter As per tender technical specifications Surgical Air 7 Bar 4.00 NOS 1,489.75 Rupees One

Hundred Eighty Nine

and Paisa Seventy

439 Matching Probe/adopter As per tender technical specifications Vacuum 48.00 NOS 1,489.75 Rupees One

Hundred Eighty Nine

and Paisa Seventy

440 Matching Probe/adopter As per tender technical specifications AGSS 2.00 NOS 1,489.75 Rupees One

Hundred Eighty Nine

and Paisa Seventy

441 Low Flow Silicon suction tubing 115.00 MTR 208.57 Rupees Two

Hundred Eight and

Paisa Fifty Six Only

442 SITC Single Area Valve Service unit : 22mm Oxygen Single Service Unit / valve box. As per tender technical 4.00 NOS 39,740.57 Rupees Thirty Nine

specifications HTM 02-01 , DIN, ISO-7396-1 ,NFPA -99 latest edition Thousand Seven

Hundred Forty and

Paisa Fifty Seven

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

443 Single Area Valve Service Unit : As per tender technical specifications Single are a valve service unit Nitrous 4.00 NOS 39,740.57 Rupees Thirty Nine

oxide N2O Thousand Seven

Hundred Forty and

Paisa Fifty Seven

444 Single Area Valve Service Unit : As per tender technical specifications Single area valve service 4.00 NOS 39,740.57 Rupees Thirty Nine

unit MA4 Thousand Seven

Hundred Forty and

Paisa Fifty Seven

445 Single Area Valve Service Unit : As per tender 2.00 NOS 39,740.57 Rupees Thirty Nine

technical specifications Single are valve service unit SA7 Thousand Seven

Hundred Forty and

Paisa Fifty Seven

446 Single Area Valve Service Unit : As per tender technical specifications Single are valve service unit 4.00 NOS 39,740.57 Rupees Thirty Nine

Vacuum Thousand Seven

Hundred Forty and

Paisa Fifty Seven

447 SITC of Medical Gas Alarm Panel :. As per tender technical specifications.a. Master Alarm panel 5 services 2.00 NOS 6,21,080.31 Rupees Six Lakh

(Oxygen, N2O, MA4 Air, SA7 Air, andVacuum) As per tender technical specifications HTM 02-01 , DIN, ISO-7396- Twenty One

1 ,NFPA -99 latest Thousand Eighty

edition and Paisa Thirty One

448 SITC of Medical Gas Alarm Panel :. As per tender technical specifications. Medical Gas Area Alarm for 2 4.00 NOS 1,38,797.03 Rupees One Lakh

services (Oxygen and Vacuum).As per tender technical specifications Thirty Eight Thousand

Ninety Seven and

449 SITC of Medical Gas Alarm Panel :. As per tender technical specifications and approved makes. 4.00 NOS 1,75,152.89 Rupees One Lakh

Medical Gas Area Alarm for 3 services (Oxygen, MA4 Air and Vacuum). As per tender technical specifications Seventy Five

Hundred Fifty Two

and Paisa Eighty

450 SITC of Medical Gas Alarm Panel :. As per tender technical specifications and approved makes. 6.00 NOS 2,27,384.94 Rupees Two Lakh

Medical Gas Area Alarm for 5 services (O2, N2O, MA4 Air, SA7 Air, & Vacuum). As per tender technical Twenty Seven

specifications Thousand Three

Hundred Eighty Four

and Paisa Ninety

451 Medical Gas Alarm Panel :. As per tender technical specifications and approved makes. Minimum leak 18.00 NOS 2,07,940.32 Rupees Two Lakh

assembly with pressure switch include with first fix & switches. (for O2, N2O, MA4, SA7). Seven Thousand

Nine Hundred Forty

and Paisa Thirty One

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

452 SITC of Medical Gas Alarm Panel :. As per tender technical specifications and approved makes. 8.00 NOS 1,38,798.22 Rupees One Lakh

Minimum leak assembly with pressure switch include with first fix & switches. (for Vacuum). Thirty Eight Thousand

Ninety Eight and

Paisa Twenty One

453 SITC of Fully Automatic Oxygen Control System 2500 LPM As per tender technical Specifications.HTM 02-01 , 1.00 SET 5,11,278.58 Rupees Five Lakh

DIN, ISO-7396-1 Eleven Thousand

,NFPA -99 latest edition Two Hundred

Seventy Eight and

Paisa Fifty Eight Only

454 SITC of Oxygen Manifold (2x12) : As per tender technical specifications.HTM 02-01 , DIN, ISO- 7396-1 ,NFPA -99 1.00 SET 4,43,946.51 Rupees Four Lakh

latest edition Forty Three Thousand

Nine Hundred Forty

Six and Paisa Fifty

455 SITC of Emergency Oxygen Supply System (2X4 ) : As per tender technical Specifications.HTM 02-01 , 1.00 SET 1,77,340.85 Rupees One Lakh

DIN, ISO-7396-1 Seventy Seven

,NFPA -99 latest edition Thousand Three

Hundred Forty and

Paisa Eighty Five

456 SITC of Oxygen Flow meter with Humidifier Bottle 36.00 NOS 7,801.52 Rupees Seven

- As per tender technical specifications HTM 02-01 Thousand Eight

, DIN, ISO-7396-1 ,NFPA -99 latest edition Hundred One and

Paisa Fifty Two Only

457 SITC of Fully Automatic Manifold Control Panel for Nitrous Oxide 650 LPM :As per tender technical 1.00 NOS 4,60,778.58 Rupees Four Lakh

specifications HTM 02-01 , DIN, ISO-7396-1 Sixty Thousand

,NFPA -99 latest edition Seven Hundred

Seventy Eight and

Paisa Fifty Eight Only

458 SITC of Nitrous Oxide Manifold (2X2 ): As per tender technical specifications.HTM 02-01 , DIN, ISO-7396-1 ,NFPA - 1.00 SET 1,11,100.00 Rupees One Lakh

99 latest edition Eleven Thousand

One Hundred and

Zero Paisa Only

459 SITC of Emergency Nitrous Oxide Supply System 1x1 size : As per tender technical Specifications.HTM 02-01 , 1.00 SET 74,487.50 Rupees Seventy

DIN, ISO-7396-1 Four Thousand Four

,NFPA -99 latest edition Hundred Eighty

Seven and Paisa Fifty

460 SITC of Vacuum Unit . As per tender technical specifications HTM 02-01 , DIN, ISO-7396-1 36.00 NOS 16,927.14 Rupees Sixteen

,NFPA -99 latest edition Thousand Nine

Seven and Paisa

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

461 Theatre Suction Unit : As per tender technical specifications HTM 02-01 , DIN, ISO-7396-1 1.00 NOS 64,027.07 Rupees Sixty Four

,NFPA -99 latest edition Thousand Twenty

Seven and Paisa

462 SITC of Isolation Lockable line valves :15mm , As per technical specifications.HTM 02-01 , DIN, ISO-7396-1 ,NFPA - 6.00 NOS 4,121.24 Rupees Four

99 latest edition Thousand One

Twenty Four Only

463 Isolation Lockable line valves :As per technical specificationsa. 22 mm 7.00 NOS 6,181.87 Rupees Six

Hundred Eighty One

and Paisa Eighty Six

464 Isolation Lockable line valves :As per technical specificationsa.28 mm 5.00 NOS 7,801.52 Rupees Seven

Hundred One and

Paisa Fifty Two Only

465 Isolation Lockable line valves :As per technical specificationsa. 42 mm 2.00 NOS 15,896.23 Rupees Fifteen

Hundred Ninety Six

and Paisa Twenty

466 Isolation Lockable line valves :As per technical specificationsa.54 mm 2.00 NOS 28,407.74 Rupees Twenty Eight

Hundred Seven and

Paisa Seventy Four

467 SITC of Skid & Electriacl Panel complete package as per technical specifications 1.00 SET 4,62,930.98 Rupees Four Lakh

Sixty Two Thousand

Nine Hundred Thirty

and Paisa Ninety

468 Supply Installation Testing and Commissiong of Bed Head Horizontal (without outlets) (1200-1500 mm) should 45.00 Nos 22,725.00 Rupees Twenty Two

comply and meet with HTM 02-01/ NFPA 99 C/EN/DIN/ISO 7396-1 standard and as per technical specification Thousand Seven

and as dircted by the Engineer in Charge. Hundred Twenty Five

and Zero Paisa Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

469 MOT 104.11 Sq Mtrs. 6,550.00 Rupees Six

Supply, Installation, Testing and Commissioning of 50 mm thick Pre Fabricated Modular Operation Theater Thousand Five

Panels (Walls and Ceiling) made out Polyurethane foam injected at 40 Kg/m3 sandwiched between Hundred Fifty and

0.8 mm thick GP and SP sheet on front side and 0.5 mm GP and SP/PPGI sheet on back-side. The inner surface Zero Paisa Only

walls be fixed to the bricks wall with essential support. There will be minimum possible cavity/gap in between

solid and steel walls and will be variable to suit the architects lay out for the flush mounting of the equipments.

The wall and ceiling panels must comply with necessary provision of to JIS Z 2801/ISO 22196, BS EN 1363-1:2020,

52210-2:1984-08, DIN 4102-1, Class A2. Any Third-party compliance certificate mandatory. Panel should be

covered with protective sheath of 300 d.f.t Anti-bacterial Paint having undergone Washability/Water resistance

Test JIS K 5663.7.12, permeability test less than 200 unit of permeability, Anti-bacterial effect against

staphyloccoccus aureus, Escherichia coli (via HALO test) and safety and causative agents such as

formaldehyde, toluene, xylene, paradichlorobenzene etc. Third party (NABL approved Lab) certification for

EGP and thickness test certificate to be submitted

at time of supply.

470 Supply, Installation, Testing and Commissioning of Ceiling Filtration System - The ceiling filtration system in the 2.00 Nos. 3,90,000.00 Rupees Three Lakh

surgical theatre should ensure a unidirectional distribution of sterile air, covering all areas affected by the Ninety Thousand

airflow. It should consist of a laminar flow system incorporated within a frame made from thick extruded and Zero Paisa Only

aluminum profiles, complete with a sealed gasket to prevent leaks. The system should incorporate "H 14" class

HEPA filters positioned in the ceiling plenum. These filters should achieve an MPPS average efficiency greater

than 99.95% and a 3-micron DOP efficiency greater than 99.99%. The filters should also be designed to handle

a final pressure drop of no more than 600 Pa, operate at a maximum temperature of 60 degrees Celsius, and

function effectively within a relative humidity range of 40-50%. The filtration ceiling system should be capable

of maintaining a constant airflow velocity of 0.25 m/s at the diffuser. This should be accomplished through the

use of a diffuser or flow equalizer that ensures uniform and constant air distribution over the entire surface area.

The structure holding the filtration system, including the filter frames and top plenum, should be made from

either aluminum or stainless steel. The system should be CE/UL certified and designed to achieve an ISO

14644/1 classification of ISO 5, with a bacteriological class of B (5 CFU/m3) and particle decontamination

kinetics CP of 5 minutes. After installation, the system's performance should be validated by a third-party

government-approved environmental lab to ensure compliance with specified standards. A positive pressure

should be maintained inside the operating theatre to prevent contamination from external air sources. The

supplier should provide test certificates for the HEPA filters and the laminar airflow systems from the original

manufacturers. Furthermore, the size of the laminar airflow system should be a minimum of 8 feet by 8 feet.

Finally, the entire system should meet CE/BIS certification standards, ensuring it adheres to both European and

Indian safety and performance regulations and including validation.

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

471 The flooring within the surgical theatre should consist of a minimum of 2mm thick antistatic seamless PVC, ensuring 104.11 Sq Mtrs. 4,250.00 Rupees Four

durability and safety. This floor should be smooth, non-slip, and made from an impervious material with sufficient Thousand Two

conductivity to dissipate static electricity effectively, yet not so conductive as to risk electric shock to personnel. The PVC Hundred Fifty and

used should be of very high quality, particularly designed for electrostatic charge dissipation, and should not be less Zero Paisa Only

than 2 mm in thickness. The installation process should utilize continuous rolls, and joints should be seamlessly welded

using special PVC thermal welding units with welding bars of the same color to ensure uniformity and prevent

contamination. The sheets should be highly durable, capable of resisting shocks, indentations, and scratches. The

conductive material should be uniformly impregnated within the PVC as grains to enhance its antistatic properties.

Additionally, the flooring should be inert to body fluids, chemicals, and disinfectants, and remain unaffected by

temperature variations typical within an operating theatre. It should efficiently discharge electric charges up to 2 kV,

and the electrical resistance (point to ground) should be maintained within 2.5x10^4 to 5x10^6 ohms, ensuring no

buildup of electrical charge beyond 100 volts. Floor installation should be performed by skilled workers from accredited

agencies authorized by the PVC sheet supplier. The installation should include a conductive copper grid beneath the

PVC sheet, supported by liquid epoxy compounds to create a uniform and level surface. Copper strips should be made

visible by grinding and not project more than 0.5mm above the floor level to prevent damage to the PVC sheet, with

one earthing lead brought out from every 150 sq.ft area and attached to the main earthing strip/ground. The flooring

should also be mechanically shockproof, scratchproof, flame retardant, and antimicrobial. Corners of the flooring

should be uniformly curved, and a concealed cove-former (aluminium) should overlap the wall panel to a height of

approximately 25mm and be sealed perfectly and uniformly. Before laying the PVC, suitable self-leveling compounds

should be used to prevent any undulations within the operating theatre. The final surface should be non-corrosive to

biological fluids and detergents, with a color that is uniform, pleasant, and matching with the ambience as approved by

the respective consignee.

472 The door to the surgical theatre should be a hermetically sealed, single sliding door measuring 2.1 meters in height and 1.5 meters 4.00 Nos. 2,95,000.00 Rupees Two Lakh

in width. The door should be equipped with a controller capable of being operated by elbow switches, foot switches, and a Ninety Five Thousand

touchless sensor, providing multiple, accessible control options. The track for the door should be made from stainless steel or

and Zero Paisa Only

aluminum, with the running surface for the top rollers angled appropriately to minimize resistance and facilitate smoother

movement. The door leaf should be suspended using high-quality hard plastic rollers with double bearings at the top. These rollers

should run under the stainless steel or aluminum track to ensure smooth and noiseless operation. The opening and closing

mechanisms of the door should be controlled by a microprocessor for precise electromechanical movement. The material of the

door should be either SMS or HPL, with a color that matches the interior design. The door should be designed to be strong yet

lightweight for ease of use. In case the automatic mechanism fails, the door should still be able to open and close effortlessly

manually. The handle of the door should be made from stainless steel with a matte finish and equipped with a high-quality

cylindrical or ESPg lock for security. The door leaf should incorporate a high-quality synthetic rubber gasket with long durability to

ensure hermetic sealing and maintain a 99.99% air tightness at a minimum pressure of 75Pa. The floor on either side of the door

should be perfectly level, with a maximum permissible difference of +1mm, to avoid any tripping hazards or unsealed gaps. The

overall thickness of the finished door should range from 30-60mm, with the inner part of the door filled with CFC-free polyurethane

foam, approximately 48mm thick, sealed airtight to block any microbial ingress. The door and its controls should comply with IEE

regulations, utilizing DC brushless or PMDC motors that are effectively isolated from mains power to ensure safety and reliability.

Additionally, the door should include a vision window measuring 300mm x 300mm, featuring double-glazed panels that are

hermetically sealed to maintain the integrity of the seal.

The movement of the door should be as quiet as possible, and the time to start moving after

receiving a signal should be adjustable between 0.5 to 20 seconds.The door controller should be CE marked, BIS certified, or IEC

60601 certified to meet international and national safety standards. A test certificate for the hermetically sealed door frame should

be included in the pre-dispatch documents to verify compliance with the specified standards and functionality.

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

473 Supply, Installation, Testing and Commissioning of Membrane-Type Operation Switch and Communication 2.00 Nos. 1,95,000.00 Rupees One Lakh

Controller - The Operation Switch and Comms Controller should encompass all necessary controls to ensure Ninety Five Thousand

the proper operation and monitoring of equipment and services in the operating room (OR). Positioned for and Zero Paisa Only

optimal visibility in the surgeon's line of sight and the OT staff, the wall-mounted membrane-buttons should be

easily accessible to the nurse for operation and assistance. In addition to hosting a digital clock and elapsed

time indicator, the panel should feature a medical gas alarm, clearly indicating high and low gas pressures for

each gas service, including vacuum, supported by an audible alarm. The Operation Switch and Comms

Controller should also provide an alarm mute option for fault annunciation, with pressure sensors strategically

located near isolation valves. Controls for general lighting, including ON/OFF and dimming, organized in

groups for uniform illumination, should be present. Furthermore, the panel should facilitate control over

operating lights (major and satellite) and camera functions (on/off and intensity). A hands-free telephone set

with memory should be conveniently situated, and temperature and humidity controls for the room, linked to

the AHU (+/5%) using NO/NC or Chilled Water/Hot Water Actuator Control Valve (whichever is applicable),

should be adjustable from the Operation Switch and Comms Controller. Real-time indicators, such as a digital

room pressure indicator and HEPA filter bank differential pressure indicator, are essential for monitoring and

maintaining a safe and controlled environment in the operating room. Telephone with Alpha-numeric

keyboard is required with Speed-dialing option.

474 Hatch boxes should be provided in each operating theater to facilitate the safe and efficient removal of 2.00 Nos. 1,15,000.00 Rupees One Lakh

waste materials to the dirty linen area or adjacent corridor. Each hatch box should be equipped with two Fifteen Thousand

doors, operated electrically or motorized, designed such that only one door can be opened at a time to and Zero Paisa Only

prevent cross-contamination. UV lighting should be installed to ensure sterilization and should remain on when

both doors are closed, automatically turning off when either door is opened. Indicators should be provided on

both sides of the operating theater to monitor the door open/close status. The material of the hatch box

should also be SS304 grade stainless steel, with a minimum size of 600mm x 600mm.

475 In each operating theater, an operating list board should be installed. It should be made of ceramic with 2.00 Nos. 28,500.00 Rupees Twenty Eight

magnetic properties and should be flush with the wall to maintain cleanliness and ease of use. LED type flat Thousand Five

panel X-ray viewing panels should be provided, complying with relevant electrical safety codes, and Hundred and Zero

mounted flush with the wall to prevent dust accumulation and microbial growth. The body should be made of Paisa Only

extruded aluminum, powder-coated with a bacteria-resistant and disinfectant-resistant finish. The diffuser on

the front panel should provide a uniformly lit screen, and dimming controls should be easily accessible.

Additionally, a proper spring-loaded film clip with rollers should be included to securely hold and easily

remove films without causing scratches.

476 LED type flat panel X-ray viewing panel should be supplied. This should comply with relevant electrical safely 2.00 Nos. 41,500.00 Rupees Forty One

codes. This should be a 2-panel viewing screen. Mounting should be flush with the wall to avoid dust Thousand Five

accumulation and growth or organisms between wall and panel. Body should be of extruded aluminium Hundred and Zero

powder coated black with bacteria resistant and disinfectant resistant finish. The diffuser on the front panel Paisa Only

should be a uniformly lit screen. Dimming electronic control should be enclosed at the bottom of the cabinet.

Proper spring-loaded film clip with rollers should be provided to hold the films firmly and to remove the film

without scratches

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

477 Supply, Installation, Testing and Commissioning of Double-Bay Scrub Sink - The scrub station should be 4.00 Nos. 1,26,000.00 Rupees One Lakh

compact, designed for use in the OT complex, and facilitate pre-procedural scrubbing. It should be made Twenty Six Thousand

from heavy gauge type 304 stainless steel with a minimum thickness of 1.5mm and feature seamless welded and Zero Paisa Only

construction polished to a satin finish. The scrub sink should have a front access panel for easy maintenance of

water control valves, waste connections, stoppers, and strainers. Hands-free operation should be enabled

through infrared sensors with programmable adjustments. Thermostatic mixing valve control should maintain

constant water temperature and be located behind the access panel. Timing should be adjustable to meet

individual usage requirements, and units should have reduced anti-splash fronts. An additional knee/foot-

operated switch should also be provided for enhanced functionality.

478 Supply, Installation, Testing and Commissioning of Storage Units - Storage units should be constructed with 4.00 Nos. 85,000.00 Rupees Eighty Five

same material, as wall and ceiling panels. The shelves, made of glass and, should be removable for cleaning. Thousand and Zero

The unit should be divided into two or more parts, each with individual glass doors equipped with a high- Paisa Only

quality locking system. The overall size of the storage unit should

be approximately 200 cm (H) x 120 cm (W) x 35 cm (D).

479 Supply, Installation, Testing and Commissioning of Peripheral Lighting - To enhance the operational 40.00 Nos. 12,000.00 Rupees Twelve

environment of each operating theatre, peripheral lighting and clean room luminaries should be installed, with Thousand and Zero

a minimum of eight units per theatre. These lights should offer an intensity of at least 500 Lux and be housed in Paisa Only

highly specular anodized aluminum with an optical antiglare system to minimize visual fatigue and glare. Each

peripheral light should measure 2' x 1'. The covers for these luminaries should be constructed from highly

resistant, disinfectant-proof laminated safety glass or acrylic, featuring a stylish, fine-grained surface that

complements the clean and sterile environment of the operating theatre. The body of the luminaries should

be made from sheet steel, perfectly powder-coated to resist contamination and facilitate easy cleaning, and

should be ready for connection either as individual units or within a series circuit. This setup should include

digital electronic control gear utilizing multilamp technology to optimize energy efficiency and light output.

The installation of these luminaries should ensure that the recess frames are gas tight. Each fitting should be

flush with the ceiling and designed to be removable from either the top or bottom for ease of maintenance. It

is crucial that the light fittings are uniformly and aesthetically distributed across the ceiling to provide consistent

illumination throughout the OT, without interfering with visibility during procedures such as green mode

endoscopy. Furthermore, the peripheral lighting system should conform to IP65 or IP54 international protection

ratings, ensuring that the fixtures are dust tight and protected against water ingress, suitable for the

demanding conditions of an operating theatre.

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

480 Supply, Installation, Testing and Commissioning of Electrical Wiring inside OT - Power distribution within each Operating 2.00 job 2,99,000.00 Rupees Two Lakh

Theatre (OT) should be handled via distribution boards located locally to each theatre using Fire Resistance Low Smoke Ninety Nine

Wiring, layed in PVC conduits of reputed brand. The sub mains power to these panels should be provided by the general Thousand and Zero

electrical contractor, and all distribution services within the departments should run from these panels. The power Paisa Only

distribution unit should hold certifications such as EN, CE, FDA, IEC, and BIS to ensure compliance with international

safety and performance standards. Each wall of the MOT should have a minimum of two hybrid switch sockets (6/16A)

on each wall, in compliance with IEC standards. Light fittings within the clinical areas should be recessed LED types

equipped with control gear and sealed in accordance with the IP54 standard. This standard ensures that the fittings are

protected against limited dust ingress and water spray from all directions, suitable for clinical environments. All

equipment should be fully and permanently labeled to clearly identify and describe the function, operation, and

voltage of the apparatus concerned. Upon completion of the electrical installation, tests should be carried out in

accordance with the relevant sections of local wiring regulations, with results duly recorded. Each OT should have a

distribution board (DBs) installed, with suitable wiring. A separate enclosure should house all high-voltage equipment to

ensure safety and isolation. The remote cabinet should contain operating lamp transformers, mains failure relays, UPS,

electrical distribution equipment, and circuit protection equipment for all circuits within the operating theatre. All internal

wiring within the DBs should terminate in connectors equipped with screws and clamp springs. Connections should be

of the clip-on type mounted on a rail approved by CE/IEC/BIS standards and labeled with indelible proprietary labels. All

internal circuits should be protected by individual fuses or miniature circuit breakers to ensure safety and manage

potential electrical faults effectively.

481 AIR HENDALING UNIT Make:KrVelocity: Not More Then 10 mt/second. , Canvass Connection-Heavy duty, non 2.00 job 12,25,000.00 Rupees Twelve Lakh

partical shreding,Fire Retardentuger,Nikotra only , Type: PLUG,Drirect Driven,Dynamically Balanced Selection Twenty Five

of fan-Should run comfortably at 50 HZ at rated capecity. Motor Make:Siemence,B.B,Crompton,ABB , Thousand and Zero

Type:TEFC, IP:55, Foot Mounted, VFD compitable and I2 generation Safety: Motor should have interlocked with Paisa Only

AHU Motor door/excess/Fire DamperType-TWO TIRE, Floor Mounted , Inner const.:0.6mm plain G.I , Outer

const.:0.8 mm G.I. Pre coated / Powder coated Thickness of Insulation: 25mm,PUF injected having density 40 to

42 kg/m3. ,Colour:As approved by CLIENT CONDENSING UNIT :

Condensing unit for AHU with all assesories and instalation (Copper pipie provide 3 mtr Only Extra will charged

extra) consider 1200 sqfeet insulation and ducting

482 Double Dome OT Light with Ceiling mounted Double Dome LED OT lights having following features and 4.00 Nos. 3,90,000.00 Rupees Three Lakh

enclosed technical specifications, having Mobile App Connectivity, Battery Backup Ninety Thousand

-Light intensity Ec - 160 000 & 160 000 lux, - Light intensity adjustment - 10 – 100% (using Digital Capacitive Touch and Zero Paisa Only

(Fully Remote Controlled)

- Color temperature Tc (with adjustment)

-Light field diameter d10 at Ec - 100 - 150 mm

-Working range - 1 m

-Color rendering index 93Ra

- Focusing Preset: Adjustable

- LED Average life - 50000-60000 hrs

- Diameter of Light - not less than 650 mm per dome

- Power Consumption - not more than 120W

OT Light should be BIS marked; manufacturer should have CDSCO License for this product under Class A,

Compliant to IEC standards such as IEC60601-1:2005+A2:2020, IEC 60601-2-41:201 (Relevant Test Certificates to

be submitted with Bid) Clause-wise Technical Compliance to be

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

483 Single-arm surgery/anesthesia pendant designed for Operating Theatres should feature a compact, modular 2.00 Nos. 2,84,000.00 Rupees Two Lakh

configuration to meet the precise requirements of hospitals, enabling customization to suit specific operational needs of Eighty Four Thousand

both Operating Theatres and Intensive Care Units. It should be equipped with robust ceiling support capable of and Zero Paisa Only

mounting a selection of arms. The extension arm, pivotal for functionality, should allow horizontal movement with a

radius of 800-900mm and provide a level rotation ranging from 0 to 330/340 degrees, with both the extension arm and

terminal box designed to rotate together and independently for maximum versatility. The pendant should support a net

loading capacity of min. 100 kg, accommodating a variety of medical instruments and devices securely. For medical

and electrical services, it should offer configurations that include at least two oxygen outlets, two vacuum outlets, one

medical air, one medical air at 7 bar, and an optional nitrous oxide outlet (In-scope of MGPS vendor) Additionally, there

should be six main sockets, each capable of supporting 5 to 15 amps, conforming to universal standards to facilitate the

operation of various medical and electronic devices. In terms of materials and construction, the pendant should be

crafted from high-strength aluminum alloy with a sealed design to enhance durability and maintain sterile conditions.

The arm itself should be made from high-density aluminum alloy extrusion, ensuring both strength and reliability.

Installation of the pendant should be ceiling-mounted to provide a reliable and firm setup, optimizing space usage in

the Operating Theatre or ICU while seamlessly integrating with existing medical systems for managing medical gas,

electrical services, data communication, and equipment. Additionally, the pendant should include practical features

such as a stainless steel IV pole and a ward vacuum unit clamp to further enhance its utility in a medical setting. With a

net weight of approximately 105 kg, accessible by the equipment carrier, the pendant should be robust yet

manageable, ensuring it meets the rigorous demands of modern medical environments.

484 Providing and fixing UPS (25KVA) Of Good Quality as directed by engineer incharge 2.00 job 3,75,000.00 Rupees Three Lakh

Thousand and Zero

485 Medical Gas Pipe Line Of Required dia for OT oxygen , Vaccum , Air.. Etc reuired Point(from existing line ) as 2.00 job 3,45,000.00 Rupees Three Lakh

directed by engineer incharge from Outer Nearest Passage to OT Pendant Rate Including , Alarm , Valve (for Forty Five Thousand

all line) , Point ,Flowmeter and Probe . if alredy then no payment given and Zero Paisa Only

486 FURNITURE WORK 17.00 Unit 1,08,560.00 Rupees One Lakh

Supplying And Placing Of Fully Motorized Iccu Bed With Head,Leg Board And Side Board With Pull Down Mechanism. All The Eight Thousand Five

Functions Are Operated By Electromechanical Actuators. 2206L X 1010W X 450 To 825 H Mm Base Frame Made Up Of Erw Tube

Hundred Sixty and

With Rect. Section Of 30 X 60 Mm With 1.2 Mm Thickness Bed Frame Made Up Of Erw Tube With Rect. Section Of 50 X 25 Mm And

X 20 Mm With 2 Mm Thickness Linkages Made Up Of Erw Tube With Rect. Section Of 50 X 25 Mm With 2 Mm Thickness Zero Paisa Only

Electromechanical Actuators – Noiseless, Smooth Operation, Imported Actuators. Cpr Lever, 30% Gas Filled Nylon, Used To Move

Down Backrest During Cpr Treatment. Leg Elevation Ratchet Ms Zinc Plated. Hettich Make Ratchet Used To Move Up Lower Leg

Rest Frame. Bumper Neoprene For Shock Absorbing. Lying Surface Frame Erw Oval Tube With Rect. Section 40 X 16 Mm With 1.6 Mm

Thickness Side Board Made Of Pp Molding With Microbial Additives For Drop Down Mechanism With Compressed Dampener For

Easy Movement And Push Fit Feel. Completely Collapsible To Achieve Zero Transfer Gap. Lying Surfaces. Abs Vacuum Form With

Anti Microbial Properties. Easy Removal And Easy Cleaning For Maintaining Hygiene. Integrated Mattress Retainer Feature. X-Ray

Cassette Holder. Compact Laminate Thickness 6 Mm. It Is A Mechanism With The Provision Of Variable Size Cassettes And Variable

Position For The Ease Of Operation. Head And Leg Board. Pp Molding Antimicrobial Additives With 3 Mm Thickness. Plastic Injection

Molded Castors And Provided With Total Lock And Directional Locking Arrangement. Wheel Dia 125 Mm. Twin Wheel Castors.

Patient Lifting Pole Holder, Iv Pole Holder Made Up Of Nylon For The Respective Arrangement. Linen Tray For Putting Linen Made Up

Of Ms Chrome Plated With Dia 8Mm. Urine Bag Made Up Of Ms Chrome Plated With Dia 6 Mm. Adjustable Iv Pole Anti Backrest

Compression Which Helps In Keeping Compression While Moving The Backrest. Auto Countering Function Is Provided In Handser In

Which The Backrest And Largest Move Simultaneously Attendant Control Panel Allows Nursing Staff To Retain Direct Control Over

Critical Positioning Functions By Giving The Patient A Limited Degree Of Adjustment. Antimicrobial And Thermosetting Epoxy

Polyester, Formulated To Fulfill The Requirements Of Bacterial Protection. Maximum Safe Working Load 300Kg Backrest Angle

Deg +_ 5 Deg Knee Rest Angle 24 Deg +_ 5 Deg Trendelenberg Angle 15 Deg +_ 1 Deg. All Metal Components Should Be Pre

Treated With Zinc Phosphating In 9 Tank Process And Then Powder Coated With Anti Microbial Epoxy Polyester Powder Coating To

Fulfill The Requirements For Bacterial Protection Against At Least 2 Commonly Found Bacteria In Hospital Environment [Gram

Positive And Gram Negative]. Goods Should Be Supplied In Knocked Down Construction To Reduce Carbon Emission.APPROVED

MAKE : GODREJ , HERMAN MILLER, STEELCASE, KNOLL,HOF

IT NO. ITEM DESCRIPTION QTY UNIT Rate In Fig. Rate In Word AMOUNT

487 Supplying And Placing Of Motorized Labour Deliverty Bed • Labour Delivery Room Bed – Electric Overall 5.00 No. 84,960.00 Rupees Eighty Four

Approximate Dimension: 2140 L X 1015Mm W (When Bed Is Fully Extended) Bedding Platform Size: 2080Mm L X Thousand Nine

760Mm W Crca Erw Rectangular Frame Work. Leg Section Can Be Telescoped Under Main Section For Hundred Sixty and

Lithotomy Position. Three Section Top. Four High-Quality Twin-Wheel With Central Locking System (Free, Steer Zero Paisa Only

And Total Brakes). Electrically Operated Functions: Backrest Angle: 65O Trendelenburg / Reverse

Trendelenburg Angle: + 12O Height Adjustment: 530Mm To 860Mm (Without Mattress) Standard Accessories:

Four Corner Buffers Remote Handset Easy Detachable Polymer Molded Head & Foot Ends.Polymer Molded

“Fold-Down” Safety Side Rail Height Adjustable Lithotomy Knee Crutches With Ss Rods Three Section Pu Foam

Mattress Removable Stainless Steel Tray For Fluid Collection. Ss Handles With Pvc Grip. Stainless Steel Iv Pole

With “Two Way” Ring Hooks. Finish: Natural Shot Blasted And Epoxy Powder Coated. APPROVED MAKE :

GODREJ , HERMAN MILLER, STEELCASE, KNOLL,HOF

488 Supplying And Placing Of 3 Function Motorized Bed – Back, Leg And Ht On Actuator, Tr-Atr On Crank, Back Rest With X-Ray Permeable. Bed With Side Board 1.00 No. 63,130.00 Rupees Sixty Three

Option). Five Function Icu Bed Should Have Height, Back Rest, Knee Rest & Auto -Contour Chair Position Controlled Through Noise Less Electro Mechanical

Nos Actuators Operated By Soft Touch Control Panel (Handset). Trendelenburg & Reverse Trendelenburg Mechanism Is Made Of Linkages Which Are Made

By Hr Ms Flat Of Size 40Mmw X 10Mm Thick. This Mechanism Should Be Operated With The Help Of Lead Screws And Crank. Lead Screws Should Be Made Hundred Thirty and

From En8 And Acme Threads Roll Formed. It Should Be Functioning On The Basis Of Synchronized Linear Roller Mechanism (Slrm). Slrm Is Assisted By Tension Zero Paisa Only

Spring Covered With Telescopic Tube With Plastic End Gaps. The Function Should Be Operated With The Help Of Ergonomically Designed Dedicated Handle,

Made Of Metal Inserted Pp Co Polymer; It Should Be Snap Locked When Not In Use. All The Four Handles Should Be Provided Operating Guidance Stickers.

1. Overall Size : L 2312 X W (900) Mm To W1060Mm X (H) Adjustable From 490Mm To 770 Mm. 2. Back Rest Angular Movement 70 Deg, Knee Rest 25 Deg, Tr

Deg And Atr 8 Deg.Safe Working Load Should Be 200 Kgs. 3. Bed Frame Should Be Made Of Ms Erw Oval Shaped Tube Of Size 30Mmx60Mm Of 1.6Mm Thick.

. All Corners Of Bed Frame To Be Provided With Bumper Mounting Holders And It Should Have Provision 4 Iv Pole Holders & 2 Patient Lifting Pole Holders. To

Be Strengthened By Rectangular Pipe Section Of Size 60Mmx30 Mm Having 1.6 Mm Thickness. 4. Lying Surface Should Be Made Of Crca Sheet Of Thickness

Of 1.2Mm Thick. This Lying Surface Should Have 4 Sections For Bed Profiling I.E. Back Adjustment, Fixed Pelvic Section, Upper And Lower Leg Adjustment.

Mattress Platform To Be Provided With 5 Nos Mattress Retainers. Lower Leg Rest Section Should Be Provided With Ratchet For Leg Rest Adjustment. Mattress

Platform Must Be Strengthened By Tubular Frame Of Size 25.4Mm Dia X 1.6Mm Thickness. It Should Be Strengthened By Trapezoidal Contour (Rounded

Corner) , Embossed Cut Out. All Metal Components Should Be Pre- Treated With Zinc Phosphate And Then Powder Coated With Anti- Microbial Epoxy

Polyester Powder Coating. 5. Back Rest Should Be Provided With X-Ray Permeable Top Made Of High Pressure Compact Laminate. It Should Have Ss X-Ray

Cassette Holder To Perform X-Ray On The Bed Itself. 6. Head & Foot Board Should Be Made Of Blow Molded Poly Propylene With Anti- Microbial Additives.

Head Board And Foot Board Should Be With Metal Inserts To Mound It On Bed Frame. Removable Pp Head Board And Foot Board Should Have Cut Out, For

Better Gripping. The Boards Should Have Provision To Paste Colour Stickers. The Stickers Should Make Of Pp Material And Pasted With 3M Adhesive. 7. The

Side Boards Should Be Made Of Pp Molded With Push To Down Mechanism, The Boards Should Have Provision For Mounting Pp Stickers. 8. The Trolley Should

Be Provided With High End 125 Mm Non Marking Steinco Castors Which Should Be Lockable Diagonally. 9. There Should Infusion Pole Holder With Ht

Adjustable Ss Made Telescopic Infusion Pole With Two Hooks To Mount Saline Bags. The Fixed Pole Should Be 31.75 Dia And The Adjustable Pole Should Be

Mm Dia With 1.6 Mm Thick. 10. The Trolley Should Be Provided With 8 Mm Dia Ms Urine Bag Holder On Both The Side. 11. The Trolley Should Have 4 Nos

Neoprene Made Bumpers For Excellent Shock Absorbing Property. 12. There Should Be Two Nos Of Glass Filled Nylon Made Cpr Lever Given To At The Both

Side Of The Bed To Make Quick Release Of The Back Rest. 13. The Unit Should Work On 230V +/- 15%, With 30 Time Battery Back Up After Fully Charged. 14. All