Supply and Testing of 09 Nos ABT Meters with RS232 RS485 and Ethernet Ports with DLMS Protocol. Make:SECURE APEX150 or L&T Make or similar. Note:1) Wiring system, CT Ratio, PT Ratio will be intimated later. 2) The Meters Testing should be done at NABL Lab testing in the presense of Railway APTRANSCO APSPDCL Officials.

OEMs or its Authorized dealers only should quote. Proforma for Tender Specific Authorization (Attached as Annexure) from manufacturers is attached with this tender. All the Authorized dealers are advised to submit the same along with their offer otherwise their offers will be summarily Rejected/Pass over

a) The tenderer with past performance of satisfactory execution of contracts to SC Railway, or Other Zonal Railways/Pus for supply of the same / similar items for a quantity of 20% or more of tendered quantity against a single contract during last three years prior to, and excluding tender opening date may be considered as responsive to SC Railways requirements for placement of bulk and regular order. b) Tenderers are requested to submit the past performance report such as Copies of R Notes/CRAC/Proof of acceptance of material by consignee etc. along with their offer; failing which offer will be summarily rejected without making any back reference. c) In case, the tenderer participates as an authorized dealer, then the performance as required above shall be that of Principal (OEM) authorizing the agent or bidder for the same OEM. It may so happen that the agent / dealer has credentials of past supply for a different Principal / OEM, then it will not be considered as performance. For Authorised dealer, tender specific authorization from OEM has to be uploaded with bid.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions

Firms claiming benefit / preference under public procurement policy for MSEs must submit relevant documents along with their offer. Failing which such benefit will not be extended to them

Guarantee/ Warranty shall be as per Governing Specification if not specified therein will be applicable as per IRS Conditions.

If you are not a MSE or a consortia of MSEs formed by NSIC, please indicate percentage of sub contracts in execution of this tender that will be from Micro and Small Enterprise [in percent of order value] with further breakup of MSE owned by SC/ST. [Information will be provided in percentage terms with 6 fields, Micro owned by SC, Micro owned by ST, Micro owned by Others, Small industry owned by SC, Small industry owned by ST, Small industry owned by Others]

I/We agree to supply the tendered stores at the rates quoted by me/us in accordance with the IRS Conditions of Contract and [or] special and [or] other conditions specified/attached with the tender

I/We agree to supply the tendered stores at the rates quoted by me/us in accordance with special and other Conditions Specified/attached with the tender.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

The tenderers in their bids shall indicate the details of their Jurisdictional Assessing officers [Designation, address & email id]

FOR Destination

Have you submitted past performance i.e. IC/DC/R NOTE/CRN.

MSEs registered for the tendered item are exempted from EMD. However, traders/ distributor/agent/Authorised dealer participating on behalf of OEM/Approved vendors are not exempted from EMD. For other details please refer Para 15 of GTC dt.23.02.23

There shall be no exemption from submission of EMD for any tender or by any tenderer except following: (a) Limited tenders with estimated value up to Rs. 25 Lakhs (including single tenders, Global Limited tenders) & open tenders with estimated value up to Rs.10 lakhs- unless specifically mentioned otherwise in the tender. EMD amount will be 2% of the estimated value of tender (b) Micro and small Enterprises (MSEs) registered for the tendered item. (c) Other Railways and Government (d) Indian Ordinance Factories (e) PSUs owned by Ministry of Railways and PSUs for the group of items that are manufactured by them (f) Vendors registered with Railways for the trade group of the item tendered, up to their monetary limit of registration status being valid on the date of tender closing (g) Vendors appearing on the approved vendor lists of RDSO/ PUs / CORE, subject to approval status being valid on the date of tender closing (h) Vendors registered with Railways for supply of medicine, medical equipments and consumables shall be exempted from submission of EMD for these items, subject to valid registration on the date of tender opening. (i) In tenders issued against PAC, OEM in whose favour PAC has been issued shall be exempted from submitting EMD. KVIC and ACASH shall be exempted from EMD for items supplied by them. For details bidder to refer SCR Instruction to tenderers document.

If exemption is not allowed as per conditions incorporated in the Instructions toTenderers, then required amount of EMD must be paid. If the offer is without EMD and exemption is not applicable as per these conditions then offer will be summarily rejected.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

By TPI Agency.

i] The ABT Meters are to be tested in certified NABL testng laboratory in the presence of Railway persons from APSPDCL and AP Transco Officials. ii] The ABT Meters are accepted only after physical inspection of APSPDCL, APTRANSCO and Railway officials

Tenderers must acknowledge acceptance of General Tender conditions and Instruction to tenderers available at SOUTH CENTRAL RLY/STORES Documents link

Make and Model Number should be indicated in the offer.

Delivery of the material & documents if any, to be sent to the Consignee only. For payment details firm should contact the consignee only. Consignee details:SSE/TrD/CS/BZA@KCC Designation:Senior Section Engineer, Contact No.:9704992481 Bill Passing Officer :---SrDEE/TrD/BZA Bill paying officer:----SrDFM/BZA.

Firm will submit material test certificate along with supply.

Inspection by TPI Agency as per Rly. Bd. letter No.2022/RS (G)/779/8 Dt.04.01.2023 for TPI inspection is attached