Improvement of Water Supply in Dehradun Cantonment Board Dehradun

Amount

Laying Of Pipe Line in Dehradun Cantt Area

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep and getting out in soft/loose soil for laying of pipe line etc of any description and in any position including forming sides and bottom surface to required level/ gradients complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep and getting out in hard/dense soil for laying of pipe line etc of any description and in any position including forming sides and bottom surface to required level/ gradients complete all as specified and directed.

Returning, filling in soil, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick, complete all as specified and directed.

Removing excavated material (soil) to a distance n'exc. 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Cast iron specials/fittings for water pressure pipe such as tail piece, tapers, tee, bend etc, one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth, ISI marked suitable for up to 300 mm bore DI pipes complete all as specified and directed.

Drilling and tapping cast iron/galvanized iron water mains (in position) for branch connection of 20 mm dia including clamps, nut, bolts and rubber packing as required including brass ferrule complete all as specified and directed.

Drilling and tapping cast iron/galvanized iron water mains (in position) for branch connection of 25 mm dia including clamps, nut, bolts and rubber packing as required including brass ferrule complete all as specified and directed.

Drilling and tapping cast iron/galvanized iron water mains (in position) for branch connection of 40 mm dia including clamps, nut, bolts and rubber packing as required including brass ferrule complete all as specified and directed.

Drilling and tapping cast iron/galvanized iron water mains (in position) for branch connection of 50 mm dia including clamps, nut, bolts and rubber packing as required including brass ferrule complete all as specified and directed.

Drilling and tapping cast iron/galvanized iron water mains (in position) for branch connection of 80 mm dia including clamps, nut, bolts and rubber packing as required including brass ferrule complete all as specified and directed.

Supply, laying, jointing and testing, galvanized iron water tubing light grade (ISI Marked) including provision of all necessary steel fittings/accessories in trenches complete all as specified and directed for the following sizes :- Make: Tata/Jindal/Zenith 15 mm bore

Supply, laying, jointing and testing, galvanized iron water tubing light grade (ISI Marked) including provision of all necessary steel fittings/accessories in trenches complete all as specified and directed for the following sizes :- Make: Tata/Jindal/Zenith 20 mm bore

Supply, laying, jointing and testing, galvanized iron water tubing light grade (ISI Marked) including provision of all necessary steel fittings/accessories in trenches complete all as specified and directed for the following sizes :- Make: Tata/Jindal/Zenith 25 mm bore

Supply, laying, jointing and testing, galvanized iron water tubing light grade (ISI Marked) including provision of all necessary steel fittings/accessories in trenches complete all as specified and directed for the following sizes :- Make: Tata/Jindal/Zenith 40 mm bore

Supply, laying, jointing and testing, galvanized iron water tubing light grade (ISI Marked) including provision of all necessary steel fittings/accessories in trenches complete all as specified and directed for the following sizes :- Make: Tata/Jindal/Zenith 50 mm bore

Supply, laying, jointing and testing, galvanized iron water tubing light grade (ISI Marked) including provision of all necessary steel fittings/accessories in trenches complete all as specified and directed for the following sizes :- Make: Tata/Jindal/Zenith 80 mm bore

Supply, laying, jointing and testing, galvanized iron water tubing light grade (ISI Marked) including provision of all necessary steel fittings/accessories in trenches complete all as specified and directed for the following sizes :- Make: Tata/Jindal/Zenith 100 mm bore

Supply, laying, jointing and testing, galvanized iron water tubing medium grade (ISI Marked) including provision of all necessary steel fittings/accessories in trenches complete all as specified and directed for the following sizes :- Make: Tata/Jindal/Zenith Note:- (Earth work shall be measured and paid separately under respective item of BOQ) 15 mm bore

Supply, laying, jointing and testing, galvanized iron water tubing medium grade (ISI Marked) including provision of all necessary steel fittings/accessories in trenches complete all as specified and directed for the following sizes :- Make: Tata/Jindal/Zenith Note:- (Earth work shall be measured and paid separately under respective item of BOQ) 20 mm bore

Supply, laying, jointing and testing, galvanized iron water tubing medium grade (ISI Marked) including provision of all necessary steel fittings/accessories in trenches complete all as specified and directed for the following sizes :- Make: Tata/Jindal/Zenith Note:- (Earth work shall be measured and paid separately under respective item of BOQ) 25 mm bore

Supply, laying, jointing and testing, galvanized iron water tubing medium grade (ISI Marked) including provision of all necessary steel fittings/accessories in trenches complete all as specified and directed for the following sizes :- Make: Tata/Jindal/Zenith Note:- (Earth work shall be measured and paid separately under respective item of BOQ) 40 mm bore

Supply, laying, jointing and testing, galvanized iron water tubing medium grade (ISI Marked) including provision of all necessary steel fittings/accessories in trenches complete all as specified and directed for the following sizes :- Make: Tata/Jindal/Zenith Note:- (Earth work shall be measured and paid separately under respective item of BOQ) 50 mm bore

Supply, laying, jointing and testing, galvanized iron water tubing medium grade (ISI Marked) including provision of all necessary steel fittings/accessories in trenches complete all as specified and directed for the following sizes :- Make: Tata/Jindal/Zenith Note:- (Earth work shall be measured and paid separately under respective item of BOQ) 80 mm bore

Supply, laying, jointing and testing, galvanized iron water tubing medium grade (ISI Marked) including provision of all necessary steel fittings/accessories in trenches complete all as specified and directed for the following sizes :- Make: Tata/Jindal/Zenith Note:- (Earth work shall be measured and paid separately under respective item of BOQ) 100 mm bore

Supplying, laying, jointing & testing of ductile iron pressure pipe (ISI Marked), 150mm bore (IS-8329-2000, Reaffirmed -2005 Edition 4.1) with spigot and socket ends, suitable for push on joints in standard working lengths supplied with rubber gasket duly "ISI Marked" for water, Class-K-7 with cement mortar lining inside and metallic zinc coating finishing layer of bituminous paint on outside the pipe without polyethylene sleeve but including "Push-on-joint" supplied with "ISI Marked" EPDM rubber gasket conforming to IS - 5382 -1985 Make: Electrosteel/Jindal/Lanco NOTE :- Earth work and CI specials/ fittings of the pipes shall be measured and paid for separately under appropriate item of BOQ.

Supplying, laying, jointing & testing of ductile iron pressure pipe (ISI Marked), 200mm bore (IS-8329-2000, Reaffirmed -2005 Edition 4.1) with spigot and socket ends, suitable for push on joints in standard working lengths supplied with rubber gasket duly "ISI Marked" for water, Class-K-7 with cement mortar lining inside and metallic zinc coating finishing layer of bituminous paint on outside the pipe without polyethylene sleeve but including "Push-on-joint" supplied with "ISI Marked" EPDM rubber gasket conforming to IS - 5382 -1985 Make: Electrosteel/Jindal/Lanco NOTE :- Earth work and CI specials/ fittings of the pipes shall be measured and paid for separately under appropriate item of BOQ.

Supply, fixing, jointing and testing, ISI Marked, of approved quality, gun metal globe/gate valve 40mm dia with iron wheel head, both ends screwed for iron pipe complete all as specified and directed. Make: Zoloto/Leader/Kirloskar

Supply, fixing, jointing and testing, ISI Marked, of approved quality, gun metal globe/gate valve 50mm dia with iron wheel head, both ends screwed for iron pipe complete all as specified and directed. Make: Zoloto/Leader/Kirloskar

Cast iron detachable joints complete with rubber rings,nuts,bolts complete fixed in repair of following size as directed 80 mm dia

Cast iron detachable joints complete with rubber rings,nuts,bolts complete fixed in repair of following size as directed 100 mm dia

Cast iron detachable joints complete with rubber rings,nuts,bolts complete fixed in repair of following size as directed 150 mm dia

Cast iron detachable joints complete with rubber rings,nuts,bolts complete fixed in repair of following size as directed 200 mm dia

Supply, installation, fixing, jointing and testing, cast iron sluice valve, heavy duty, long body type, class PN-1.6, ISI Marked (IS-14846 of 2000) with flanged ends having stainless steel spindle with iron wheel head with stuffing box, nuts, bolts, washers rubber packings etc complete with and including taking down existing sluice valve of any description and in any position complete all as specified and directed for following bores :- Make: Zoloto/Leader/Kirloskar 80 mm dia

Supply, installation, fixing, jointing and testing, cast iron sluice valve, heavy duty, long body type, class PN-1.6, ISI Marked (IS-14846 of 2000) with flanged ends having stainless steel spindle with iron wheel head with stuffing box, nuts, bolts, washers rubber packings etc complete with and including taking down existing sluice valve of any description and in any position complete all as specified and directed for following bores :- Make: Zoloto/Leader/Kirloskar 100 mm dia

Supply, installation, fixing, jointing and testing, cast iron sluice valve, heavy duty, long body type, class PN-1.6, ISI Marked (IS-14846 of 2000) with flanged ends having stainless steel spindle with iron wheel head with stuffing box, nuts, bolts, washers rubber packings etc complete with and including taking down existing sluice valve of any description and in any position complete all as specified and directed for following bores :- Make: Zoloto/Leader/Kirloskar 150 mm dia

Supply, installation, fixing, jointing and testing, cast iron sluice valve, heavy duty, long body type, class PN-1.6, ISI Marked (IS-14846 of 2000) with flanged ends having stainless steel spindle with iron wheel head with stuffing box, nuts, bolts, washers rubber packings etc complete with and including taking down existing sluice valve of any description and in any position complete all as specified and directed for following bores :- Make: Zoloto/Leader/Kirloskar 200 mm dia

Supply, installation, fixing, jointing and testing cast iron non return valve, 150mm dia, class PN 1.6, ISI Marked (IS:5312, Part-I), both ends flanged with nuts, bolts, washers rubber packings etc complete all as specified and directed.

Supply, installation, fixing, jointing and testing cast iron air release valve (80 mm), double ball fixed on 150 mm and 200 mm dia CI/DI pipe, ISI marked with nuts, bolts, washers rubber packings etc complete with and including taking down existing valve of any description complete all as specified and directed.

Supply & fixing of Mechanical joint ductile ISI mark iron pipe with all the accessories(glands and fasteners) a size of 80/100 mm to ensure a leak free assembly.

Supply & fixing of Mechanical joint ductile ISI mark iron pipe with all the accessories(glands and fasteners) a size of 150 mm to ensure a leak free assembly.

Supply & fixing of Mechanical joint ductile ISI mark iron pipe with all the accessories(glands and fasteners) a size of 200 mm to ensure a leak free assembly.

M & L for PCC (1:3:6) typeC-2 using 40 mm graded stone aggregate as in foundation filling complete all as specified and as directed.

M&L for providing cement concrete PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in cills, bed plate, coping, etc complete all as specified and as directed.

Construction of valve pit masonary for valves and meters complete with MS sheet cover and locking arrangement including brick work in CM 1:6, plaster(internal/external) in cement mortar (1:4), two coats of white washing to exposed surface,painting to MS sheet 4mm thick cover with enamelled(black/green) paint over a coat of red oxide of the following sizes complete all as specified and as directed :-900mmx900mmx900mm

Construction of valve pit masonary for valves and meters complete with MS sheet cover and locking arrangement including brick work in CM 1:6, plaster(internal/external) in cement mortar (1:4), two coats of white washing to exposed surface,painting to MS sheet 4mm thick cover with enamelled(black/green) paint over a coat of red oxide of the following sizes complete all as specified and as directed :-750mmx750mmx750mm

Construction of valve pit masonary for valves and meters complete with MS sheet cover and locking arrangement including brick work in CM 1:6, plaster(internal/external) in cement mortar (1:4), two coats of white washing to exposed surface,painting to MS sheet 4mm thick cover with enamelled(black/green) paint over a coat of red oxide of the following sizes complete all as specified and as directed :-500mmx500mmx500mm