Remaining work of Providing, Supplying & Installation of Sewage Treatment Plant (0.30MLD), Construction of External Drainage Network and Strom Water Drain Network in New Police Head Quarters Makansar Morbi, Dist- Morbi (Including Electrical work) (without SBD) (1st Attempt)

Name of Work :- Remaining work of Providing, Supplying & Installation of Sewage Treatment Plant (0.30MLD), Construction of External Drainage Network

and Strom Water Drain Network in New Police Head Quarters Makansar Morbi, Dist- Morbi (Including Electrification)

Statement showing the approximate quantities for the items of the above work to be carried out and

Cost put to Tender for Rs.

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

(A) CIVIL WORK:

Excavation for foundation upto 1.5 m depth including sorting out and stacking

Rupees Two Hundred Sixty Four and

1 of useful materials and disposing off the excavated stuff any lead and lift.(A) 291.00 Cum 264.44

Paisa Fourty Four Only

Excavation for foundation upto 1.5 m depth including sorting out and stacking

Rupees Two Hundred Seventy Five

2 of useful materials and disposing off the excavated stuff any lead and lift.(D) 1102.00 Cum 275.31

and Paisa Thirty One Only

Soft rock not requiring Blasting

Excavation for foundation upto 1.5 m depth including sorting out and stacking

Rupees Six Hundred Twenty One

3 of useful materials and disposing off the excavated stuff any lead and lift.(E) 326.00 Cum 621.26

and Paisa Twenty Six Only

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand

Rupees Three Thousand Sixty Four

4 broken stone aggregates 40 mmnominal size) and curing complete excluding cost 163.00 Cum 3064.60

and Paisa Sixty Only

of formwork in (A) Foundation and Plinth

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-

pressure pipes I.S. class NP2 of the following internal diameter with collars and Rupees Two Hundred Fifty Four and

butt ends prepared for collar joints including testing of joints complete.(B) 150mm Paisa Sixty Four Only

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-

pressure pipes I.S. class NP2 of the following internal diameter with collars and Rupees Three Hundred Fifty Six and

butt ends prepared for collar joints including testing of joints complete.(C) 250mm Paisa Twenty Eight Only

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand

: 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-

cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm

thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating

coat of neat cement and making channels in cement concrete 1:2:4 mix (1-

Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth Rupees Sixteen Thousand One

7 complete including curing and testing (i) Inside size 900mm x 1200mm including 77.00 No. 16154.59 Hundred Fifty Four and Paisa Fifty

with 230mm thick wall of brick masonry using brick having crushing strength not Nine Only

less then 35kg/sqcm in c.m. 1:5 for multipurposepipeline (B- Typedepth 1.50mt.

for multipurpose line)rate are also inclusive of providing and fixing precast

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

Extra rate for constructing B.B masonary for every additional depth of .1m. Or part Rupees Three Hundred Ninety Three

8 there of over item No 24.27 (I) for depth from 1.5M to 2.25 60.00 No. 393.26

and Paisa Twenty Six Only

Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

Rupees Two Hundred Ninety Eight

9 thickness including watering, ramming and consolidating etc. complete. 1953.00 Cum 298.79

and Paisa Seventy Nine Only

Providing and laying controlled cement concrete M-200 for curing complete,

excluding the cost of formwork and reinforcement for reinforced concrete work in

(A) Foundations, footings, Base or columns and Mass concrete Rate also Rupees Four Thousand Four

inclusive of providing & mixing of plasticiser as per approved make in propotion as Hundred Fifteen Only

Providing and laying Controlled cement concrete M-200 and with curing etc.

complete including the cost of formwork but exculding the cost of reinforcement Rupees Nine Thousand Nine

11 for RCC WALL heving any cross sectional area of wall For any Height .Rate also 127.00 Cum 9913.84 Hundred Thirteen and Paisa Eighty

inclusive of providing & mixing of plasticiser as per approved make in propotion as Four Only

Providing and laying Controlled cement concrete M-200 finishing smooth with

curing etc.complete including the cost of formwork but excluding the cost of Rupees Seven Thousand Six

12 reinforcement for R.C.C. work in SLAB having thickness of 10cm and upto 15cm 95.00 Cum 7627.60 Hundred Twenty Seven and Paisa

for all FLOOR Rate also inclusive of providing & mixing of plasticiser as per Sixty Only

approved make in propotion as per mix design

Providing TMT Bars Fe -500/Fe-500D reinforcement of any other approved

Rupees Seventy Six and Paisa Fifty

13 brand of GSPHC ONLY for RCC work including cutting, bending, binding and 35780.00 Kg. 76.52

placing in position etc.complete for all floors.

Provide and Supplying in standard lrngth ISI mark rigid Unplasticised PVC pipes

suitable for potable water with ring fit joint including cost of ring, as per IS

specification no. 4985/1988 including all local and central taxes, transportation, Rupees Two Hundred Eighteen

14 freight charges, octroi, inspection charge, loading, unloading convey to the 141.00 Rmt 218.00

departmental stores and including cost of jointing meterial etc. complete. Test

Pressure 6 Kg/cm2 Dia 110 mm.

Providing 10 mm thick cement plaster in single coat on ceilings for interior

plastering and finished even & smooth in C.M.1: 3 (1cement :3 sand) including Rupees Two Hundred Ten and

15 finishing with a floating coat of neat cement slurry in Ground Floor. 1052.00 Sqm 210.05

Paisa Five Only

Providing 15 mm thick cement plaster in single coat on ceilings for interior

plastering and finished even & smooth in C.M.1: 4 (1cement :4 sand) including Rupees Two Hundred Nine and

finishing with a floating coat of neat cement slurry in Ground Floor. Paisa Seventy Two Only

Providing CEMENT VATA (10cm x 10cm)size quarter round in cement mortar 1 :

Rupees Twenty Four and Paisa Four

17 1 including neat cement finishing,watering etc.Complete. 1402.00 Rmt 24.04

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

Distemering (Three coats) with oil bound distemper of approved brand and

manufacture and of required shade on wall surface to give an even shade, over

one coat of primer with two coat of distemper of approved brand and manufacture

after thoroughly mortar droppings and other foreign matter and also including Rupees One Hundred Six and Paisa

white cement based putty preparing the surface even and sand papered smooth.( Eighty Five Only

One coat of primer & two coat of Distemper)

Designing, providing, Supply, Fixing / Installation, Testing & Commissioning of

complete FRP (steel/metal tanks coated with FRP shall not be accepted)

Underground Package Sewage Treatment Plant of capacity 300,000 Lit/Day (300

KLD) based on MBBR (Moving Bed Bio-Reactor) Technology, consisting 5 (Five) nos.

of Fiber Glass Reinforced Plastic (FRP) tanks made as per BS 4994:1987. Each FRP

Tank must have minimum shell thickness of 9.5 + 0.5 mm, made from polyester resin

and glass fiber; with hollow ribbing of polymeric material of minimum 50 mm

thickness encased on outside of the tank with polyester resin and fiber glass, to make Rupees One Crore Twenty Two Lacs

19 tank suitable for underground application up to an over burden of 2.3 m of soil on 1.00 Package 12273950.00 Seventy Three Thousand Nine

top. STP System to have Four (4) zones viz. Anaerobic Zone (First Zone), Anoxic Hundred Fifty Only

Zone(Second Zone), Aeration Zone (Third Zone) & Final Sedimentation Zone (Fourth

Zone). The system shall be housed in 5 (Five) nos. FRP Tanks. All the tanks shall have

a Diameter of 2.2 m with usual process variation and Length of 10.8 m with usual

process variation

First Zone of STP to work as Anaerobic Zone. Second Zone to work as Anoxic Zone

for removal of Total Nitrogen in form of inert Nitrogen Gas.

Third Zone to work as Aerobic / Aeration zone having advanced polymeric media

with a specified surface area to volume ratio of minimum of 400 Square meter/Cubic

meter. Aerobic Zone shall be aerated by using air blowers with minimum air-flow

rate of 300 cum/hr through coarse / fine aeration in the zone for speedy reduction of

BOD. Fourth Zone to work as Final Sedimentation zone and should have submersible

pump for recycling

the activated sludge on a regular basis. The whole plant to be controlled by control

panel comprising necessary protection & timers for auto operation / alteration of

each equipment. Plant must consist other accessories such as internal piping, pipe

fittings at inlet & outlet, necessary sockets, strap & RCC blocks to hold the tank. Each

tank must have 2 (two) access manholes (FRP manhole riser) of minimum 600 mm

dia with FRP cover on each

manhole and provision of vent at each manhole. The treated sewage from STP must

be further Disinfected Chlorine (Sodium Hypochlorite) Dosing System before reuse /

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

Influent to this STP shall be mix of:

a) Waste water from WC

b) Waste water from bathroom

c) Wastewater from kitchen

Effluent of STP and TTP must be within the below prescribed limits:

BOD < 30 mg/lit, COD < 150 mg/lit, TSS < 50 mg/lit, Total Nitrogen < 50 mg/lit,

Fecal Coliform (MPN/100 ml) < 1000, pH: 6.5-8.0

B) Operation & Maintenance (O&M) for a period of 3 (three) Years from the date

of commissioning / Trial Run; of FRP Under-Ground Package Sewage Treatment

Plant of capacity 300,000 Liters per Day based on MBBR (Moving Bed Bio-

Reactor) Technology.

The Operation & Maintenance of STP for three years which include cost of

operator, periodical cheeking of the plant, periodical testing of treated water with

submission of reports, oiling,gresing ,routine and preventive maintenance of

electrical items,consumables,chemicals,disposal of dried sludge as per direction

of engineer-in-charge. The scope must be not limited to,but inclusive of the

following during the O&M Period: Appointment of operator, round the clock supply

of chemicals & Consumables, Repair/Replacement for equipment ( if

required),Day to Day Maintenance of each equipment,Test Reports, Sludge

Disposal etc.(The Price mentioned above must be inclusive of all taxes and duties

with responsible for NOC from gujarat pollution control board, arvind envisol

limited, hydrosys agri. Pvt. Ltd. or equivalent as per approval by consultant and

engineer incharge. and O&M is part of whole package)

Designing (aesthethically) and constructing RCC frame structure of pump house

with positive suction and negative suction With Gantry strucutre (Min. Height

20 M) (GWSSB item - 6A, Upto 6.00 M (Plinth Level to Top slab Beam bottom)

General specifications :

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

(1) Preparing structural design of RCC structure of required Sq.m of slab as per

relevant I.S.s and constructing the same. (2) Including excavation in all types of

soil strata (including rock) including shoring strutting if required, for loose soil / to

protect from collapse due to near by traffic load. (3) Casting 100 mm thick P.C.C.

leveling course in M-15, Refilling the pit with proper soil and disposing of the

surplus stuff at all lead . (4) Brick Masonary work in C:M 1:6 ( Conventional

Bricks).(5) Including 10mm thick cement plaster in ceiling in CM 1:4 and inside

15mm thick cement plaster in wall in C:M 1:4 and out side 20 mm thick Sand

faced cement plaster.

(6) Providing and Laying 25mm thick Daimond polished kota stone in Flooring

and Skirting. (7) Providing and Laying Granite Telephonic black colour 15mm

to 18mm thick for jambs and sills of door and window.(8) Providing and Fixing

Alluminium window Three Track.(9) Providing, Supplying and Fixing32mm (Total)

thick flush door shutter with 1mm thick Laminates (10)Providing and cement

based treatment of required thickness the on both side of shutter. Laying

Integrated proofing over roof. (11) Providing and Fixing to wall,ceilingand floor swr

rainwater pipe as per IS 13592 OF 90MM DIA.

(12) Name Board of Building on Acrylic Plate.

(13)Providing ISI Mark 7 Levers three keys pad lock Navtal ( Godrej).

(14) Plastic Emulsion paint on ceiling/slope surface(two coats) (Rate are inclusive

of applying two coats of lapy(putty) and one coat of primer.).

(15)Finishing wall with Plastic emulsion paint on wall surface (two coat) over

above applying one coat of primer.

(16)Finishing wall with weather proog exterior emulsion paint on wall surface(two

coats) over and above applying one coats of primer.

(17) Providing,Fabrication and fixing M.S. GRILL/GATE of approved pattern

fabricated from M.S. flats, square bars,round bars,c channel,square/round box

pipe as per detail drgs. Including all types of labour and material charges of

lowering, laying, erecting / hosting and jointing of any aspect for sump room Brick

Masonry in 1:6 and wall thicness is 230mm. Providing and applying three coats of

acrylic paint inside and Apex pain outside to the structure. List of Indian

Standards for Design of civil works:- The structural design of Sump room shall be

in accordance with provisions relevant I.Ss.

(1) I.S. 3370 part I & II 2009 or latest revised

(1.1) I.S. 3370 part III & IV 1965 or latest revised

(2) I.S. 456 – 2000 or latest revised.

(3) I.S. 1893 – 2000 – 1984 or latest revised.

(4) I.S. 875, Part – 1 to 3, 1987 or latest revised.

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

2) Properly covered Utility Room / shade with Door, Window, Roof, Electric Point

for Control Panel, Bulb etc. + Base / Otla for Blowers & Wall for mounting panel

as per in charge engineer.

(3) The minimum concrete grade for RCC slab shall be M-20 and 125mm thick,

with terrace water proofing & parapet also.

(4) TMT 500 grade reinforcing bars confirming to I.S. 1786 / 1139 shall be

considered in design. CRS / TMT bars shall be provided

(5) Size shall be fixed as per availability of space (land area) at site / acceptable

engineer in charge

(6)Any charge in data, dimensions, shape, water depth, reduction in size if

permitted by competent authority and if it reduces quantity then payment

shall be reduced prorate or not is unfettered right to in charge engineer

1. Minimum 15 % opening for ventilation should be provided.

2. Pump room rolling shutter, door and windows of aluminium section and window

grill of iron should be provided (Included in Cost).

Desigining (Aesthetically) and Construction R.C.C Frame Structure of Pump

Rupees Fifteen Thousand Three

Room with Positive Suction/ Negative Suction 6(A) With Gantry Structure (mini.

15.00 Sqm 15301.72 Hundred One and Paisa Seventy

Ht=4.5m) up to 6.00M (plinth level to up to top slab beam bottom)

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

Preparing structural design of RCC Under Ground / Partially under ground Rs.

Fifteen Thousand Eight Hundred Ten Only Rs. Fifteen Thousand Eight Hundred

Ten Only / above high ground level Reservoir of required capacity as per relevant

I.S.s and constructing the same,including excavation in all types of soil strata

(including rock) including shoring strutting if required, for loose soil / to protect

from collapse due to near by traffic load, casting 100 mm thick P.C.C. leveling

course in M-15, Refilling the pit with proper soil and disposing of the surplus stuff

at all lead including cement plaster in CM1:2 With approved water proofing

compound inside and outside up to 300mm ground level water touching surface to

container . including all type of labour and material charges of lowering laying

erracting / hosting and jointing of pipe assembly to inlet, outlet overflow, wash out

and byepass arrangement as per hydraulic design . providing and fixing

assesories like MS/GI ladder, CI Man hole , frame and cover, watemm thick

21 Laminates (10)Providing and cement based treatment of required thickness the

on both side of shutter. Laying Integrated proofing over roof. (11) Providing and

Fixing to wall,ceilingand floor swr rainwater pipe as per IS 13592 OF 90MM DIA.

bering / marking with oil paint by painter as instructions given by G.S.P.H.C.L

with provisions

I.Ss. MINIMAX, CEASEFIRE) KANEX, MINIMAX,

(1) I.S. 3370 part I & II 2009 or latest revised

(1.1) I.S. 3370 part III & IV 1965 or latest revised

(2) I.S. 456 – 2000 or latest revised.

(3) I.S. 1893 – 2000 – 1984 or latest revised.

(4) I.S. 875, Part – 1 to 3, 1987 or latest revised.

-1965 OR Latest revised (2) I.S. 456, 2000 Or latest revised (3) I.S. 1893 -2000-

1994 OR Latest revised (4) i.s. 875 part – 1 TO 3 1987 OR latest revised.

General specifications

[1].Water depth in container shall be adopted as per data of tender. If water depth

is not specified the suitable water hydraulic requirement shall be adopted for

[2].Shape of container (in plan) specified by in data shall be adopted in absence

circular shape shall be adopted.

[3].Size shall be fixed as per availability of space (land area) at site / acceptable

engineer in charge.

[4].Effect of overlapping of pressure bulbs on soil due near by structure and

proposed sump should be considered. Care shall be taken that no damage should

[5].nearby existing structure. Compensation shall be paid for the same by agency.

[6].The minimum concrete grade for RCC shall be M-30

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

[7]. Fe 500 grade reinforcing bars confirming to I.S. 1786 / 1139 shall be

considered in design. CRS / TMT bars shall be provided. In saline atmosphere

corrosion resistance stainless steel / HCR rebar shall be provided. Any other steel

can be used with approval of C.E./ in situation of non availability in market without

[8].Minimum size (or thickness) of various components shall be provided as

per tender criteria / specifications in absence as per I.S./ Std. practice of

G.W.S.S.B. Minimum dimensions specified for various components in tender data

/ specifications shall be provided without fail.

[9].The safe bearing capacity (SBC) shall be referred from SBC test report. In

absence of report it shall be referred from data sheet. If poor soil is found / water

table is met with during excavation SBC shall be scientifically ascertained and

design shall be revise. No extra shall be paid for increase in

[10].DI pipes and special shall only be used if type is not specified in tender.

[11].The rate shall include cost of dewatering during excavation making all

arrangement when water table meets within depth.

[12].The structure shall be designed properly to resist uplift due to ground water

table specified in data or actual ground water table meets with during excavation.

If GWT / Uplift iswater table meets with during excavation. If GWT / Uplift is

mentioned in tender and during excavation it dose not meet 7.5% rate shall be

[13].SS pipes railing shall be provided when sump height is S 1.5 meter above

[14a].RCC staircase/RCC Steps should be provided from GL to sump top slab

based on the height of the GSR above/below the ground.

[14b].RCC Staircase with SS railing to be provided inside reservoir container. BB

Masonry staircabin to be provided to cover the same with MS safety door having

locking arrangement

[15].Appearance of structure should be aesthetically good looking acceptable to

[16].Any charge in size, shape, depth below GL, height above GL, water depth,

F.B., size of member etc can be permitted in exceptional case due to site

condition or hydraulic design requirement by C.E. No extra shall be paid for

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

[17].Any charge in data, dimensions, shape, water depth, reduction in size if

permitted by competent authority and if itreduction in size if permitted by

competent authority and if it reduces quantity then payment shall be

reduced prorate.

[18].When capacity of GSR / Sump is > 20 lakh liters two or suitable

compartments acceptable to executive engineer shall be designed and provided.

[19].Agency shall engage qualified (at least graduate) consulting engineer for

designing the structure and he / she shall visit the site for guidance of work.

[20].75% part rate shall be payable for concrete, reinforcement and plastering

items of container until satisfactory hydraulic testing for water tightness is

performed as per tender condition. Till the work shall be treated as incomplete.

Above conditions / general specifications Sr. No. 1 to 20 are part and parcel of

tender (contact) and prevail over other

provisions in tender for below 1 to 5 differents capacity of Sumps for STP as per

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

Preparing structural design of RCC Under Ground / Partially under ground Rs.

Fifteen Thousand Eight Hundred Ten Only Rs. Fifteen Thousand Eight Hundred

Ten Only / above high ground level Reservoir of required capacity as per relevant

I.S.s and constructing the same,including excavation in all types of soil strata

(including rock) including shoring strutting if required, for loose soil / to protect

from collapse due to near by traffic load, casting 100 mm thick P.C.C. leveling

course in M-15, Refilling the pit with proper soil and disposing of the surplus stuff

at all lead including cement plaster in CM1:2 With approved water proofing

compound inside and outside up to 300mm ground level water touching surface to

container . including all type of labour and material charges of lowering laying

erracting / hosting and jointing of pipe assembly to inlet, outlet overflow, wash out

and byepass arrangement as per hydraulic design . providing and fixing

assesories like MS/GI ladder, CI Man hole , frame and cover, watees of lowering,

laying, erecting / hosting and jointing of any aspect for sump room Brick Masonry

in 1:6 and wall thicness is 230mm. Providing and applying three coats of acrylic

paint inside and Apex pain outside to the structure. List of Indian Standards for

Design of civil works:- The structural design of Sump room shall be in accordance

with provisions

engineer] (Make:

I.Ss. MINIMAX, CEASEFIRE) KANEX, MINIMAX,

CEASEFIRE)ll be in accordance with provision relavent I.S. (1) I.S. 3370 Part- I &

II 2009 OR Latest revised (1.1) I.S. 3370 Part- III & IV -1965 OR Latest revised (2)

I.S. 456, 2000 Or latest revised (3) I.S. 1893 -2000- 1994 OR Latest revised (4)

i.s. 875 part – 1 TO 3 1987 OR latest revised.

Screen Chamber - 1 Rupees Five and Paisa Ninety Eight

COLLECTION TANK Rupees Four and Paisa Thirty Four

EQUALIZATIONTANK Rupees Five and Paisa Ninety Eight

Screen Chamber - 2 Rupees Five and Paisa Ninety Eight

Treated Water Storage Tank Rupees Five and Paisa Thirty Three

(A) Total Amount of CIVIL Work Rs

(A) Total Amount of CIVIL Work Rs

(B) ELECTRICAL WORK

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

22A Providing & erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm

copper PVC insulted FRLSH wire with 1.5 sq. mm (green) copper PVC insulated

FRLSH wire for earth continuity in FIA approved ISI mark medium class white

colour 20/25 mm dia. embossed rigid PVC pipe with PVC fitting fixed with

adhesive solution erected on/in Brick Wall / slab along with continuous G.I. fish

wire to draw wires and laid in approved manner zari for PVC pipe and boxes shall

be filled with cement mortar and finishing the surface to match the wall / ceiling

complete with approved make 5/6 Amp. ISI make modular type switch and 6.00 Point 580.00 Rupees Five Hundred Eighty Only

accessories mounted in 20 G. G.I. company fabricated metallic box covered with

appropriate front plate modules erected flushed with wall / ceiling with necessary

modular lamp holder / modular ceiling rose / HD Connector as directed for

concealed wiring.(Deep Junction box 75mm depth if required)(Make & Model

approved by EIC and matching colour with switch and accessories) Light point.

Necessary sheet / tape / polythene / sand must be erected or filled in all box to

prevent mortar going into the box. Length of point wiring must not increase than

10 mtr. For that necessary switch boards and their locations must be finalised

before execution by agency otherwise payment will not be done for extra long

point. (For future extention, if required, agency has to erect one higher size metal

box and modular plate as per instruction of EIC. Cost of blank plate shall be paid

as per tender item) [This item include cleaning (inside/outside) of all G.I. switch

boards, electric point box, fan box, MCBDB & box cutting plaster finishing for

modular plate without any gap] (Conductor resistance should be as per

22B For Fan Point (with 6 A. Modular type switch and two module hum free EME Five

1.00 Point 816.00 Rupees Eight Hundred Sixteen Only

step type Electronic fan regulator both having ISI mark) Cat.-II

22C For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark)

1.00 Point 616.00 Rupees Six Hundred Sixteen Only

22D For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having Rupees Two Hundred Eighty One

ISI mark ) Cat.-II Only

23A Providing and erecting Medium Class FIA approved and ISI mark white colour

(embossed) RIGID PVC PIPES of following size complete erected with necessary

PVC fittings & Junction boxes fixed with adhesive solution & clamps on / in wall /

ceiling along with continuous fish wire to draw mains with necessary fittings and 60.00 Mtr. 24.00 Rupees Twenty Four Only

junction boxes for following dia. (a) 20 mm. dia.

23B 25 mm dia. 50.00 Mtr. 33.00 Rupees Thirty Three Only

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

24 Supplying and laying UPVC cable trunking system comprising unplasticised

polyvinyl, chloride rigid material with ignition free & flame proof confirming BS .All

necessary accessories and measuring of following sizes. [1] 75 mm x 50 mm Rupees Two Hundred Seventy Five

trunking.[MK, LEGRAND, OBBO make Only] Only

25A Providing and laying Mains with FRLSH PVC Insulated wire ISI marked 1.1 KV

grade in existing FIA approved ISI mark medium class 20/25/32 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution to be

erected on/in block wall / slab along with continuous G. I. fish wire to draw mains

laid in approved manner with plastering by cement mortar & finishing the surface

to match the wall / ceiling complete with FRLSH PVC insulated wire for earth

continuity. (Approved ISI make only) (Conductor resistance should be as per 30.00 Mtr. 81.00 Rupees Eighty One Only

IS:8130/1984 [a] 2 x 1.5 sq.mm. FRLSH copper multi stranded conductor

mains with 1.5 sq.mm. FRLSH copper multi stranded conductor for

earthing as per standard colour code. (Conductor resistance should be as per

25B 2 x 6.0 sq.mm. FRLSH copper multi stranded conductor mains with 2.5 sq.mm.

FRLSH copper multi stranded conductor for earthing as per standard colour Rupees One Hundred Ninety Two

code.(Conductor resistance should be as per IS:8130/1984) 20.00 Mtr. 192.00

26 Providing & fixing 20 mm. dia. PVC insulated G.I. corrugated Flexible pipe with

necessary socket, PVC bushes saddle, Check-nuts etc. complete of following Rupees Thirty and Paisa Ninety

sizes. Five Only

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

27 Providing & Erecting Plug Point wiring with 1.1 KV grade ISI marked approved

make 2 x 2.5 sq.mm copper PVC insulated FRLSH wire with 1.5 sq.mm

(green) copper PVC insulated FRLSH wire for earth continuity in FIA approved

ISI mark white colour medium class 20/25 mm dia. embossed rigid PVC pipe

with PVC fitting fixed with adhesive solution erected in brick wall/slab along with

continuous G. I. fish wire to draw wires and laid in approved manner zari for PVC

pipe & boxes shall be filled with cement mortar & finishing the surface to match

the wall / ceiling complete with 16 Amp Modular type Swich and accessories

mounted in 20 G. GI company fabricated metallic box covered with appropriate

front plate modules erected flushed with wall. (a) 16 Amp switch & 1 No. 6/16 A Rupees Eight Hundred Ninety Six

universal socket white colour suitable for 3 pin top duly both having ISI 1.00 Point 896.00

mark mounted in 20 G. GI company fabricated metallic modular box covered with

appropriate front plate modules erected flushed with wall.Above accessories will

be erected combined or separately as per site requirement and instruction of EIC..

(Necessary Sheet Must Be Erected On All Box To Prevent Mortor Going In

To The Box) Cat.-II. (Conductor resistance should be as per IS:8130/1984 )

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

28 Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of

225 mm dia in soft soil. Suitable for doing pipe-in-pipe technology

earthing.Earthing electric rod must be made from Corrosion free Hot dip

galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark

of Reputed Brand, Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark

reputed Brand Terminal Size: 70mm X 100mm length, Terminal Should be made

from inner pipe for that pipe must be pressed and gave rectangular shape so its

work as a terminal.The hot deep galvanising must be done after above

process.Galvanised thickness must be minimum 75 micron any where. SS Nut

bolt:- 2 no.with washer suitable for 14mm dia. hole must be provided at terminal.

total minimum Weight(approx.) of earth electrodewith inside conductive material Rupees Seven Thousand Twenty

minimum should be 26 kg. Five Only

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per

IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

(C) Back fill Compound:- Earthing compound should be capable to retain moisture

for long time Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm

X 400 mm depth and Cover should be heavy duty cast iron with required size of

300 mm X 300 mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM

has to submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be

measured with earth tester. Agency has to bring the earth resistance to at least

ohms & voltage between neutral & Earthing upto 02 volt. Agency has to maintain

earthing & its value for one year. Earthing must be done in the presence of A.E.

29 For above earthing additional charges for boring in hard rock soil (by breaker) &

filling soft soil in earth pit (certificate for soil have to given by DEE / AE along with Rupees Three Hundred Twenty Five

photographs) Only

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

30 Supplying and erecting M.S./G.I. metal box having 16 Gauge painted with red

oxide be concealed in wall with necessary plastering & finishing with 3 mm thick Rupees Five and Paisa Ninety Four

laminated sheet with grooving as directed of following depth 3" depth. 500.00 Sq. Inch 5.94

31 Supplying & erecting Sintex or approved make SMC press moulded composite

FRP. loop-in, loop-out approx. 2mm thick box complete with bakelite connector

strip 4way & hinged doors having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with cable clamps& earth bolt 5.00 Each 510.00 Rupees Five Hundred Ten Only

of following size of box.(b) 250 mm x 200 mm x 100 mm [deep]

32 Supplying & erecting approved make street light box comprising CNC Processed

robust housing made FRLSom single sheet multi folded with high grade powder

coating (RAL-7032 Structure finish as Standard) of IP-55 degree of Protection Rupees One Thousand Six Hundred

Gasket (PU Gasketing) of following size of Box. [i] 350 mm X 200 mm X 150 mm 1.00 Each 1646.00

Fourty Six Only

[Make and model approved by EIC strictly as per tender specification]

33 Providing & Erecting 3 mm thick acrylic Sheet with grooving as directed

200.00 Sq. Inch 3.00 Rupees Three Only

34 Supplying and fixing radium sticker or Painting the number and words for

inventory Identification on erected fittings / equipment’s or Such accessories

(MCBDB, Panel, Pole, Rack, Earthing, Pump, Door etc.) as may required with

good quality of enamelled paint or fade proof, weather proof, waterproof high

quality vinyl radium sticker for indoor / outdoor application as directed by engineer 100.00 Each 22.00 Rupees Twenty Two Only

in charge. For up to 20 characters, up to 50 mm height.(The colour of sticker /

paint should be as per instruction given by EIC as per site requirement)

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

35 Supplying and Erecting LED indoor fitting having 1100mm long with LED of

wattage Mashroom shape 0.2W to 0.5W assemble on single MCPCB with

housing use as a heat sink shall be made from white powder coating Aluminum

extrusion having enough strength (sample must be approved by EIC)with

polycarbonate diffuser with following specification:

(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp Rupees Three Hundred Seventy

(E) Power Factor : Min. 0.90 4.00 Each 370.00

(F) ATHD :Max. 15%

(G) Rated Luminous flux: Min. 2420 lm

(I) CRI: Min. 80Ra

(J) Driver Efficiency: Min. 80%

(K) LED life span: Min. 50000 Hrs @ L70 (Certificate shall be attached)

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M) Surge protection : Min. 2KV

(N) IP rating: IP

(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be provided

(Q) Fixing Clamp min.12mm wide heavy duty design & strength should be

sufficient to hold the fitting erected on wall or ceiling

(R) 3 core x 1.0 Sqmm copper wire with min. 1ft (300mm) earthing connector.

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to

submit 5 yrs free replacement Guarantee for complete Fixture) [Approval will be

given strictly subject to item specification]

36 Providing and erecting Polycarbonate body surface mounting LED Bulk head

type 9 watt Lighting Fitting with electronic driver having THD < 15%, CRI>80,

P.F.0.95 And lumen output from luminaire 720 lm, input voltage range 160-270 V

AC, 50 Hz cool white (3000 to 6500 k), inbuilt driver having efficiency >=80lm/w, - 2.00 Each 780.00 Rupees Seven Hundred Eighty Only

20 deg C to + 60 deg C working temperature, AL frame with Beam Angle 120 deg.

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

37 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to

6 Class-I, 50 Hz. Specification of Ceiling Fan must be as per below. (1) Sweep:

1200 mm, (2) Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power

Consumption: maximum 53W, (5) RPM: minimum 330, (6) Service value:min

m3/min. (7) Class of insulation: 'B', (8) No. of heavy duty premium quality Ball

bearing: Two, (9) Total Body: Top & Bottom should be alluminium, (10) Blade:

Aluminium approx 1.1 mm thick, (11) Colour: White high grade powder coating,

(12) Canopy: Two Nos. Heavy duty, (13) Condenser: min 1.5 MFD (15%

Tolerance )as per is 1709-1984, Aluminium body premium quality, Branded

make,(14) Down road: up to 1.0 mtr as per site requirment, (15) Required fixing Rupees One Thousand Nine

accessories, (16) 3 core 0.75 sq.mm ISI wire as per site requirment, (17) No Hundred Twenty Nine Only

vibration and noise due to mechanical parts. (Agency has to erect safey wire with

ceiling fan and checked with EIC) (OEM has to approved model as per tender

specification anvolt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture

for long time Back Fillin

38 Supplying & Erecting Fan Hook Of 10 mm M.S Round bar bounded to the RCC

bars up to 50 mm Length each side & piereced through 18 Gauge G.I Box having

Rupees One Hundred Twenty Five

125 mm dia depth of 75 mm complete erected concealed in ceiling with necessary 1.00 Each 125.00

modular plate / sheet.

39 Supplying & erecting 19/20 mm. nominal bore "B" class G.I. pipe / M.S. pipe down

rod erected duly painted for fan complete with necessary 24/0.2 flat 3 core flexible

Core with earthing. [The down rod thikness, hole, locking arrangement,

construction, poweder coating, colour shed should be same as original down rod

brought with ceiling fan. For that agency has to give original down rod sample to

fabricator and one sample down rod should be approved with EIC. After approval 3.00 Rn. Mtr. 107.00 Rupees One Hundred Seven Only

given by EIC, agency can use the down rod as per approved sample. If without

approval down rod will be erected on site, agency has to replace them with own

40 Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 25 K.A. at 415 V, having normal current rating

25 A to 100 A. with variable/Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader tinned copper & Rupees Six Thousand Seven

complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Hundred Twenty Three Only

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

41 Supplying & Erecting Approved Make Extended operating rotary handle with

pad lock with three position Trip, Off, On suitable for 25 Amp. to 250 Amp. panel

mounting.(Company Must be same company of switchgear)

1.00 Each 952.00 Rupees Nine Hundred Fifty Two Only

42 Supplying and erecting KITKAT pattern porcelain cutout with base of following

Rupees Two Hundred Seventy Six

current capacity erected on existing block board. [vi] 100 A. 500 V. 3.00 Each 276.00

43 Providing and Erecting of Miniature circuit breaker single pole 6 Amp. to

Amp. suitable to operate on 240 V A.C. system and having breaking capacity 10 Rupees One Hundred Twenty Two

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark. Cat-III. Only

44 Providing and erecting busbar chamber confirming to IS-375 fabricated from

GMS sheet dust & vermin proof having hinged door with rubber gasket and

necessary busbar supports with copper busbar having current density not more

than 1.6 amp/sqmm (Rated current per Cross Section area) duly wired with colour

insulating tape for phase sequence, three phase & neutral Each equal & one

meter long suitable for following current capacity with necessary painting mounted Rupees Four Thousand Three

on wall or pedestal frame of required size with necessary incoming and outgoing Hundred Seventy Eight Only

connections with proper size of copper strip/wire with lugs as directed. Suitable

for 100 Amp. [make and model approved by EIC strictly as per tender

45 Providing & erecting 240 V MCB Double pole switch for Motor & Inductive load (C

curve) having 10 KA breaking capacity & confirms to IS:8828 in Existing M.S. box 3.00 Each 360.00 Rupees Three Hundred Sixty Only

having following capacity. For 40 Amp.

46 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve)

having 10KA breaking capacity & confirms to IS :8828 in existing box having 2.00 Each 803.00 Rupees Eight Hundred Three Only

following capacity [c] 63 Amp.

47 Supplying and erecting Approved make ELCBs / RCCBs conforming to IS:

12640 having serial number printed on it and having sensitivity of 30 mA and

Short Circuit withstand capacity of 10 KA and suitable for operation on 3 phase

and neutral 440 V having characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for following Max. rating Rupees Three Thousand Three

erected as directed in existing same company metal box with earth terminal with Hundred Eleven Only

necessary numbering / marking with oil paint by painter. (ii) 63 Amps. FP.

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

48A Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG

sheet steel duly powder coated with gasket, dust & vermin proof bakelite shield

two earthing terminals for following type of RCCB, RCCB + MCB [a] For 2 pole

[Same company metal box used as MCB / ELCB used with earthing terminal Rupees Two Hundred Ninety Nine

with necessary Numbering / marking with oil Paint by painter] Only

48B [b] For 4 Pole [Same company metal box used as MCB / ELCB used with

earthing terminal with necessary Numbering / marking with oil Paint by Rupees Four Hundred Eighty Six

49 Supplying & erecting approved make Four Pole 415 V change over switch

interior for panel mounting with operating mechanism A.C.23 duty Rupees Four Thousand Seven

confirming to IS For 63 Amp. Hundred Thirty Eight Only

50 Providing ad erecting approved make single phase Double Door metal clad

D.B. as per relevant indian standards ammended upto date.

Supplying and fixing following way CONCEALED TYPE single phase MCB

distrubution board of company fabricated sheet box with powder coated inside

and outside after apply seven tank chemical process of CRCA sheet cover

complete with suitable integral single piece construction tinned copper busbar and

link with all necessary interconnection and with necessary size MS frame for

mounting MCBDB. MCBDB Door, Back side and Body of MCBDB must be made

of 1.2 mm thick CRCA Sheet. Manufacturer must be provided (1) IP 43 and as per

IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank Powder 1.00 Each 4090.00 Rupees Four Thousand Ninety Only

coating Certificate (3) Tinned Copper/Brass make neutral & Earthing link with

isolation & Protecting Cover for 240 Volts on surface / recess complete with loose

wire box, terminal connectors for all incoming and outgoing circuits, with suitable

size FRLS PVC insulated copper conductor up to terminal blocks and internal

connection, tinned coppper bus bar, 1 no. tinned copper neutral link, tinned

copper earth bar, din bar, detachable gland plate, interconnections, powder

painted including earthing etc.

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

Single phase incoming and horizontal single phase outgoing. For 6 Way MCBDB:

Including 1 no. 40 Amp. 30 mA double pole ELCB (ELCB confirming to

IS:12640/1988 having sensitivity of 30 mA and breaking capacity of 10 KA), 1 no.

MCB 40 Amp. double pole switch (C curve confirms to IS:8828 having breaking

capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL suitable to

operate on 240 Volt A.C. power. (6 Amp to 25 amp.:- 2 Nos.) Cat.-III

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB

must be erected in line & level with spirit level and finish the external edge with

box cutting plaster) (Same colour MCB(SP/DP) should be used as same as

MCBDB) [Including Necessary numbering / marking on box done with red colour

radium sticker as per site requirement and instructions given by EIC on site. Font /

number size given by EIC on site as per requirement]

51 Supplying & erecting 12 mm thick backelite sheet of approved make and grade on

existing 25 x 25 x 3 mm red oxide painted angle iron frame suitable for fixing

ICDP SWITCH and energy meter (contractor shall make approved drawing of

Rupees Two Thousand Two Hundred

Bakelite sheet To arrange required No. of Energy meter & ICDP/MCB switch- 1.00 Sq. Mtr. 2289.00

Eighty Nine Only

busbar etc. as per Actual space available in electrical room at site)

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

52 Supplying and erecting approved make GRP / FRP Ladder type Cable Tray

Material – Corrosion Resistant Polyester Flame Retardant U.V. Stabilized Resin

System - Manufactured from Pultruded Sections - Polyester Resin System, Glass

Content : 55 – 60 % - Thickness- Rung Sq. Hollow Tube 25mm x 25mm - Fixing

of Rung to Side Rail with Thermoplastic Pin & Epoxy Adhesive, Assembly Single

Stroke 3 Mtr. Length- Rung Spacing – 300mm - Length of Tray: 3000mm- Support

Span – 2500mm, Deflection L/200 or < 10mm whichever is less - Specification

Followed NEMA FG1 1993- UV Resistant - Flame Retardant – IS 6746 - Appendix

K/UL 94, Very Low Flammability - Oxygen Index – Minimum 30% as per ASTM D

Flame Spread (Extent of Burning) – 20mm as per Standard ASTM D 635 -

Tensile Strength – 4000 – 8000 Kg/Cm2 as per Standard ASTM D 638 - Flexural Rupees Four Hundred Ninety Three

Strength – 2500 – 10000 Kg/Cm2 as per Standard ASTM D 790- Izod Impact Only

Strength – 130 Kg/Cm2 as per Standard ASTM D 256- Compressive Strength –

2500 – 5000 Kg/Cm2 as per Standard ASTM D 695- Barcol Hardness – 50 –

(A) Width 150 mm, Side Member “C” Section : 75 x 25 x 25mm with 4mm

Thickness, Loading 30Kg./Mtr. With Concentrated Load 70Kg. at center of

53 Providing, erecting, Fabricating the M.S. structure as per requirement of site as

per structure design Including proper size approved by EIC of M.S. angles, flats,

bars, square pipe, channels, sections (Tata, Jindal, Asian, JSI Make) complete

with cutting, welding, grinding and finishing duly painted with Asian/Nerolac make

premium quality oil paint and true care red oxide metal primer,asian paint make Rupees Seventy Five and Paisa Ten

with erection on site as per direction of engineer in charge with necessary Only

grouting cementing, plastering and finishing complete. All hole opening of square

pipe end must be closed with M.S plate welding. Payment will be done on KG as

per Actual weight.

54 Providing and erecting metalic danger notice board for MEDIUM VOLTAGE

installation to be erected as per I.S. 2.00 Each 69.00 Rupees Sixty Nine Only

55 Providing and erecting following type of Modular Type Accessories mounted

with 20 G company fabricated metalic box, single mounting base frame covered

with textured / metallic front plate, modules erected with necessary connection. As

5.00 Each 16.00 Rupees Sixteen Only

desired by Engineer in charge. Blank Plate Single. Cat.-II

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

56 Supplying and erecting Fabricating terminal box for street light pole made from

SWG M.S. sheet having following size complete with fixing arrangement for

terminal board, with necessary hole for wire entry and exit from the box. The box

shall be provided with cover and hinges on one side and bolting at other end The

box shall be fixed by clamps fabricated from 25mm x 6mm flat.The box shall be

painted with one coat of red oxide and two coats of paint having following box size

330 mm x 260 mm x 140 mm (depth). Providing and fixing Terminal board of size 1.00 Each 702.00 Rupees Seven Hundred Two Only

5.0 x 127 x 152.4 mm.bakelite sheet with 15 Amp. kitkat pattern porcelain fuse

unit with suitable brass studs with nuts, washers and clamps of size 25 mm x

mm suitable for pole painted with one coat of red lead paint.

57 For Wall & terrace Street light Bracket Providing & erecting bracket consisting of

ISI mark "B" class G.I. Pipe 4.2 cm outside diameter complete with suitable G.I.

Sleeve tubing of 2 mm. thick and required size and length suitable for 76.5 /

mm. required size of pole top or pipe in pipe surface for terrace as per instruction

of EIC or wall bracket as per instruction of EIC having nuts and bolts for fixing the

brackets and having spread of Upto 0.50 mtr. length with suitable rise as per site

condition and suitable welded stiffner reducer and nipple with check nut complete

Rupees Four Hundred Eighty Seven

painted with one coat of yellow zinc and two coats of alluminium paint for Single 1.00 Each 487.00

arm bracket suitable for pole or terrace as per design given by EIC (a) For single

arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:-

Bajaj, Valmont, Transrail, Ambica, RR Ispat Only) (Test certificate to be

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

58 Providing and Fixing SITC of Outdoor aesthetically designed LED Street Light

Luminaire with total consumption of 48 - 59 Watts with single piece die cast

aluminium housing, High power White LEDs wattage of 5 Watt & Above shall be

mounted on high quality metal core PCB with extremely precison designed heat

sink complete with IP66 protection Class with polycarbonate / thoughened glass

cover / cluster Lens the fixture should be suitable for pole/bracket mounting. The

fixture to comply both LM79 and LM 80 guidelines with LED module L70 at

hrs, provided with high quality polycarbonate lenses /cluster Lens for better light

distribution. The Fixture Should be able to be Pole Mounted and also bracket

mounted, provided with high quality driver for protection against high and low Rupees Four Thousand Four

Voltage cut Off, opertional for high amibient and high humid envirnoments, THD Hundred Six Only

of driver should be less than 10% and P.F > 0.95. Also the Fixture should meet

the following technical criterias Oprating range Voltage 160 to 270 V, sys 695-

Barcol Hardness – 50 – 65 (A) Width 150 mm, Side Member “C” Section : 75 x

x 25mm with 4mm Thickness, Loading 30Kg./Mtr. With Concentrated Load 70Kg.

The Separate Potted driver should have over current, over voltage protection,

short circuit protection so that the fixture recovers once the fault is removed. In

addition to the above product should be operational in the temperature range of

deg to 50 deg and humidity range of 10% to 90% RH. (Note:- The manufacturer /

authorized Channel partner of the manufacturer has to submit 5 yrs free

replcement Guarantee for complete Fixture)

59 Supplying & Erecting following size of Light duty “A” Class G.I. Pipe & erecting as

Rupees One Hundred Seventy One

directed by Engineer-in-charge. For 25 mm dia. 5.00 Mtr. 171.00

60 Providing & erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI

marked copper wires of following size to be erected as directed. 3 core x

sq.mm. PVC insulated round copper wire ISI mark. 20.00 Mtr. 58.00 Rupees Fifty Eight Only

61 Providing & erecting FRLSH XLPE (IS : 7098) (I)-88 ISI marked armoured

Copper cable for 1100 volt to be laid 90 cms. Under ground or to be laid 90 cms.

Under ground or to be laid on wall with suitable G.I. heavy guage 1.0 mm thick

cable clamp or in existing DWC pipe underground or road crossing or floor 100.00 Mtr. 451.00 Rupees Four Hundred Fifty One Only

of following size of cables.For 4 core x 4 sq.mm.

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

62 Providing and erecting FRLSH XLPE (IS:7098) (I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid 90 cms. Under ground or

to be laid on wall with suitable G.I. heavy guage 1.0 mm thick cable clamp or in

existing DWC pipe underground or road crossing or floor of following size 300.00 Mtr. 450.00 Rupees Four Hundred Fifty Only

of cables.. (C) 3 1/2 core 70 sq. mm ( 35 Sq.1/2 mm core)

63 Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to

IS: 16205 (part 24) 2018)) with minimum load required of 450N capacity with anti

rodent and ultra violet material properties with necessary connecting accessories

of same material at required depth to be laid 90 cms. under ground for laying of

Rupees One Hundred Seventeen

cable below ground / road surface for enclosing cable and back filling the same to 250.00 Mtr. 117.00

make ground as per original. (A) For Outer dia. 50 mm and Inner dia. 38 mm. )

(Test Certificate to be Submitted)

64A Providing & fixing double compressed heavy duty flange type brass cable gland

with rubber ring for P V C insulated armoured cable complete with outgoing tails,

insulating tape etc. For following size cables. For 2 to 4 core x 2.5/4.0 Sq. mm 12.00 Each 43.00 Rupees Fourty Three Only

(Sigma, MCI, Comet Make Only)

64B For 3 & 1/2 core 70 Sq. mm (Sigma, MCI, Comet Make Only)

6.00 Each 102.00 Rupees One Hundred Two Only

65 Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

[a] 1.5/2.5 to 6 Sq.mm 200.00 Each 8.00 Rupees Eight Only

66 Providing & fixing Solderless crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut bolts in an 6.00 Each 20.00 Rupees Twenty Only

approved manner. 35 Sq.mm.

67 Providing & fixing Solderless crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut bolts in an 18.00 Each 25.00 Rupees Twenty Five Only

approved manner. 70 Sq.mm.

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

68A Providing and laying Mains with ISI marked, 1.1 KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated conforms

to IS:694, IEC - 227 erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters & control wiring) with 25.00 Mtr. 70.00 Rupees Seventy Only

required size of copper lugs, nuts and bolts if required. For One wire One wire

68B One wire 10 .00 sq. mm Rupees One Hundred Fourteen

68C One wire 16.00 sq. mm Rupees One Hundred Seventy Six

69 Providing and erecting open well type horizontal submersible mono block

pump set with cast iron body having following specification [E] 7.5 HP For

phase open well horizontal mono block pump set suitable for 370 TO

LPM discharge at required head as per plumbing length and vertical &

Horizontal head. Agency has to submit the details calculation of head to

GSPHCL and get approval of make and model of pump having tender

specification with TDS & GA drawing. Suitable for 65 mm dia delivery pipe Rupees Twenty Eight Thousand

with 10 mtr. necessary Size 3 Core Flat copper flexible cable. (Body: Cast iron / Three Hundred Three Only

Winding : Copper / stator : Copper / rotor : Copper / shaft : SS / Carbon material)

(test certificate from manufacture shall be submitted).

The model of the pump with respect to head and discharge will be approved by

Pump should have following specifications:

(1) Minimum 10 mtr. Cu. flat cable of suitable size must be provided with pump.

(2) Pump shall be installed as per manufacturer foundation/erection drawing or as

per IS specification.

(Body full C.I., stator winding- copper, rotor- copper, shaft- SS / carbon material,

motor-Energy efficiency)

70 Lowering of existing submercible motor pump set complete with required No.

and size of pipes by means of proper chain pulley block and pipe wrenches. Job

includes stacking of pipes cronologically after the checking of threads. [d] For Rupees One Thousand Two Hundred

open well horizontal submercible pump set for sump well. (ii) 7.5HP 2.00 Each 1272.00

Seventy Two Only

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

71 Supplying and erecting approved make 7.5 HP DOL type motor control cubical

panel made from 16 G. CRCA sheet duly epoxy powder painted inside and

outside with hinged doors and locking arrangement Floor Mounting On 300 mm

Height with MS Stand Angle & CC Foundation. Size 35 mm (H) x 35 mm (W) x

mm (D). The detail specification & quantity of material used are as under. Rupees Fourty Six Thousand Eight

Panel must be with minilec relay for auotmatic change over for pump 1 & 2 1.00 Each 46847.00

Hundred Fourty Seven Only

logically without using manually change over switch (Minimum Panel Size:

meter (H) x 1.10 meter (W) x 0.25 meter (D).

INCOMMER SECTION: (1) MCCB-30 KA-FP (Ics = 100% Icu), Rating: 63 Amp.,

Make: L&K, Qty: 01 No. (2) Digital Ammeter (SR-65), Rating: 0-60 Amp., Make:

Schneider/L&K, Qty: 01 No. (3) Ammeter Selector Switch, Rating: 6 Amp., Rotary,

Make: Salzer, Qty: 01 No. (4) Digital Voltmeter (SR-65), Rating: 0-500 V, Make:

Schneider/L&K, Qty: 01 No. (5) Volt Selector Switch, Rating: 6 Amp., Rotary,

Make: Salzer, Qty: 01 No. (6) C.T.- Current Transformer, Rating: 60/5 Amp.,

Make: Virat, Qty: 03 Nos. (7) Indicating Lamps (R,Y,B), Rating: 22.5 mm LED,

Make: L&K, Qty: 03 Nos. (8) SP MCB , Rating: 20 Amp., Make: L&K, Qty: 03 Nos.

(9) Control Wiring, Rating: 1.0 Sq.mm, Make: Any ISI, Qty: Lot (10) Copper

Busbar, Rating: 63A/100 Amp., Qty: Lot

Outgoing Feeder (7.5 HP DOL Feeder): Qty: 02 Nos. (1) MCB-FP-10 KA,

Rating: 32 Amp., Make: L&K, Qty: 02 Nos. (2) Power Contactor (415 V) Main,

Rating: 18 Amp., Make: L&K, Qty: 02 Nos. (3) Over Load Relay, Rating: 9-15

Amp., Make: L&K, Qty: 02 Nos. (4) Digital Ameter (SR-65), Rating: 0-30 Amp.,

Make: Schneider/L&K, Qty: 02 Nos., (5) Digital Voltmeter (SR-65), Rating: 0-500

V, Make: Schneider/L&K, Qty: 02 Nos. (6) Indicating Lamps (Start,Run,Trip),

Rating: 22.5 mm LED, Make: L&K, Qty: 04 Nos. (7) Push Button (Start,Stop),

Rating: 22.5 mm, Make: L&K, Qty: 02 Nos. (8) SPP, Rating: 415 V, Make: Ellico

Qty: 02 Nos. (9) Selector switch for Pump 1 and 2 operation, Rating: 6 Amp.,

Rotary, Make: Salzer, Qty: 1 No. (10) Terminal, Rating: As per Amp., Make: L&K,

Qty: 04 Nos. (11) Control Wiring, Rating: 1.0 Sq.mm., Make: Any ISI, Qty: Lot (12)

Power Wiring, Rating: As Per Amp., Make: Any ISI, Qty: Lot

Outgoing Feeder (6 Amp. - 01 No.) For Capacitor (1) MCB-FP-10 KA, Rating:

Amp., Make: L&K, Qty: 01 No. (2) Capacitor- MPP Type, Rating: 3 KVAr, Make:

Concap/Subodhan, Qty: 01 No., (3) Power wiring, Rating: As Per Amp., Make:

Any ISI, Qty:Lot

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

Outgoing Feeder (32 Amp. - 01 No.) For Lighting (1) MCB-FP-10 KA, Rating:

32 Amp., Make: L&K, Qty: 01 No. (2) Power wiring, Rating: As Per Amp. (3)

Earthing Strip: 25 x 3; G.I. Strip, Qty: 01 No. (4) MCB-DP-10KA, Rating: 20 A.,

Make: L&K, Qty.:01 Nos.

72 Supplying and erecting ISI maked C.I. Sluice valve at position with necessary

material like flange, packing, nuts, washers etc. for following size of pipe Rupees One Thousand Five Hundred

diameter. 65 mm dia. (3) Fourty Three Only

73 Supplying and erecting C.I. Swing check type non-return (reflux) valve ISI

marked with packing, flange, nuts and bolts etc.suitable for following pipe size. Rupees One Thousand Four

For65 mm dia. Hundred Seventy Five Only

74 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible

Submersible copper cable approved make of following Size. [C] 3 Core x 4 Rupees One Hundred Fourty Five

75 Supplying and erecting Water tight M.S.Box of size 20 x 15 x 15 cms. to erect

suitable kitkat fuse / MCB to be . erected on polished wooden board inside the

box with hinged/sliding door with rubber rings and erected on pole with suitable Rupees Two Hundred Thirty Two

pole clamp, all duly painted with one coat of red oxide and two coats of paints. 2.00 Each 232.00

(Cost of Fuse / MCB shall be taken extra) [Provision for motors cable joints near

76 Providing & fixing water proof straight joint in PVC insulated flat flexible copper

Rupees One Hundred Eighty Eight

cable by using insulated material water proofing material and making the joint 2.00 Each 188.00

complete. UP to 10 Sq.mm.

77 Providing & Erecting Universal Astro 5 KVA intelligent streetlight control

system insu with weather proof box for outdoor application. (As per specification Rupees Eighteen Thousand Four

attached separately) (Make and model approved by EIC) Hundred Six Only

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

78 Providing and fixing of ABC Type Store Pressure Fire Extinguisher Having

capacity 6 kg Filled with Mono Ammonium Phosphate Powder 50% confirms to

IS 4308, Stored Pressure Type, UGTS Pressure Gauge, Can Height 530 mm,

Diameter 150 ± 10mm, Discharge Time 24 Sec, Controllable discharge

mechanism, Jet Range 5 Meters, Average Discharge is 92%, applicable on Class

A,B & C and electrically started Fire, Fire Rating 4A:144B, Can Construction :

Deep drawn & CO2 Mig welded, EPDM(Ethylene Propylene Diene Monomer)

Rubber Hose with both end Aluminum clamped, Internal Coating - Epoxy Powder

coating, External Coating - Pure Polyester Powder coating (UV Resistant),Brass

forged CE Marked valves with NRV & Auto Safety Release with safety Pin is of

SS material, Made up from 1.6mm thick sheet, Extinguishers confirmed to IS

15683:2018 and ISI marked. Referance Weight:-Gross Weight 8.9 Kg, Empty

Weight 2.9 Kg, 1. Necessary certificate & and guarantee must be attached, 2. Rupees One Thousand Nine

OEM has to provide wall mounting heavy duty bracket/clamp, screw, hardware 1.00 Each 1991.00

Hundred Ninety One Only

for installation. 3.Following printed marking Manufacturing Date and Expiry Date

must be mention on Extinguisher 4. Refilling period must be of 3 Years. Following

Printed marking on equipment must be required:- Model No, Capacity, Gross

Weight, Content, Fire Rating, Batch No, Serial no, Mfg Month, Refilling Due. [with

necessary numbering / marking with oil paint by painter as instructions given by

G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX, CEASEFIRE)

Item No. Description of Item Total Quated Rate in Total

Quantity Rate Rs. In Words Amount Rs.

79 Providing and fixing of CO2 type High Pressure Portable 4.5 kg Fire

Extinguisher, filled with Co2 Gas as per IS 15222, Control discharge mechanism

fitted with 1 Meter Wire Braided Hose & Electrical non-conductor Polyethylene

Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time

12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically

started Fire, Fire Rating 55B, Internal coating is not applicable & External coating

is of enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI

Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI

mark, Body confirms to IS 7285 and PESO ( Petroleum and Explosives Safety

Organization) APPROVED, Minimum Wall Thickness 4 to 4.2 mm, Extinguishers

confirmed to IS 15683:2018 and ISI marked. Referance Weight:-Gross Weight Rupees Six Thousand Five Hundred

16.4, empty weight 11.9 Kg, 1. Necessary certificate & and guarantee must be 1.00 Each 6526.00

Twenty Six Only

attached, 2. OEM has to provide wall mounting heavy duty bracket/clamp, screw,

hardware for installation. 3.Following printed marking Manufacturing Date and

Expiry Date must be mention on Extinguisher 4. Refilling period must be of

Years. Following Printed marking on equipment must be required:- Model No,

Capacity, Gross Weight, Content, Fire Rating, Batch No, Serial no, Mfg Month,

Refilling Due. [with necessary numbering / marking with oil paint by painter as

instructions given by G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX,

(B) Total Amount of ELECTRIC Work Rs

(B) Total Amount of ELECTRIC Work Rs

(A+B)Total Project Amount Rs.

Executive Engineer

Contractor sign GSPHC Ltd