WBPWD/EE/PED/NIQ34_2nd Call /2020-2021

Amount

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand Finolex/R R Kable/ KEI]as per choice of EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish.

Average run 8 mtr [E-14/2 ©]

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Finolex/R R Kable/ KEI] as per choice of EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish

On Board 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC.{E-10/4(a)(i)}

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

Legrand 4 Way [D-10/14]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [Make:- Legrand]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [ Make -Legrand]

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall as per GS( Make - Legrand )

4 Way ( Up to 160 A ) ( Legrand ) [15 / D- 11]

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA in existing Vertical DBs including necessary connection as per GS [ Make - Legrand ].

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [ Make -Legrand ]

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.

63 A, (Make:- L&T/ Havells) [D-3/4(a)]

Supplying and fixing Sheet steel Main Switches on flat iron frame on wall

240 V, 32 A DP [Make- Havells]

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [E-6/21]

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [E-6/22]

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [E-7/25]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.[E-19/17]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.[E-17/5(a)]

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections. [E-17/5(b)]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand Finolex/R R Kable/ KEI) as per choice of EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy.fittings as required

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [E-14/1(a)(ii)]

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC [E-14/1(a)(iii)]

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC. [E-14/1(a)(iv) ]

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [E-14/1(a)(i) ]

Supply of 4/3.5 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make :- Gloster/ Havells]

4 core 35 sq mm [ NS ]

2 core 10 sqmm [NS]

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting [F-1/2(b)]

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

For 4 core 35 sqmm [F-4/7 ©]

For 2 core 10 sqmm [F-4/7(a)]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

For 4 core 25 sqmm [F-5/8 (b)]

For 2 core 10 sqmm [F-5/8 (b)/(iii]

S & Delivery of single 4 ft., 20 watt LED light fitting complete with all accessories with tube lamps as follows:[Make -Philips cat no. TMC 501 P1 x T- LED 20 W P3241] [NS] or eqiv, Crompton/Havells as per choice of EIC.

S & Delivery of single 4 ft., 20 watt LED tube lamps as follows:[Make -Philips ] [NS] or eqiv, Crompton/Havells as per choice of EIC.

S & Delivery of Twin 4 ft., 20 watt LED light fitting complete with all accessories with 2 nos tube lamps as follows:[Make -Philips cat no. TMC 501 P2 x T- LED 20 W P3241] [NS] or eqiv, Crompton/Havells as per choice of EIC.

Supply of ceiling fans complete with all accessories having the following Model / Cat No. ( Make -Usha striker plus) [ NS ] or equiv, Crompton/ Orient New breeze

1200 mm Sweep.

Supply & delivery 450 mm Metal Blade type Wall Bracket fan complete with accessories (Make- Orient Tornedo Wall II) or equiv Crompton/ Usha.

S & F only outdoor post top type LED light fitting complete with all accessories to be fixed/ projected from wall of the building/pillar incl. making holes on pillar top, S & F 40 mm di GI pipe (ISI-M) 0.40 mtr average length, with GI socket/ nipples at one end and thread at the other end to house the fitting & making necy connections with S & F necy length of 3 X 1.5 sq mm PVC insulated single core stranded annealed cu wire & making connections as reqd & mending good the damages to wall/pillar and painting.(Havells,CAT No-LHEVBHP7PN6K025) [NS]

Supply and fixing 9W LED lamp (Make:Philips/Crompton/ Havells )

Supply & fittings of LED Street Light [Male- Crompton NEXUS + ,Cat no- LSTP-72-CDL ] Or equiv, Philips, Bajaj

Supply & fittings of LED Street Light [Male- Crompton NEXUS STAR ,Cat no- LSTP-100-CDL ] Or equiv, Philips, Bajaj,]

Supply & fittings of LED Street Light [Male- Crompton FREEDOM+ ,Cat no- LSTP-40-CDL ] Or equiv, Philips, Bajaj,]

Fixing only outdoor / street light type fluorescent light fitting complete with all accessories to be fixed/projected from the wall of the building incl. making holes to building, S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end & suitable bend to house the fitting & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting

S & F of 9''1370 r.p.m sweep AC exhaust fan incl. making hole on wall with nuts & bolts as required with louver shutter. (EPC heavy duty) 1370 r.p.m. and S& F louver with nuts and bolts.[NS]

S & F of 24''920 r.p.m sweep AC exhaust fan incl. making hole on wall with nuts & bolts as required with louver shutter. (EPC heavy duty) 1370 r.p.m. and S& F louver with nuts and bolts.[NS]

Supply & Fixing Socket type fan regulator (Step type)(Brand approved by EIC) on existing sheet metal switch board as per GS. [ 18 (a) / E-6 ]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS. [ 21 (a) / C-3 ]

Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. [D-13/22]

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [C-2/17]

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [C-2/16]

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long)

23 cm Exhaust fan (9") ( For Al) [D-14/32(a)]

60 cm Exhaust fan (24") ( For Al) [D-14/32(a)]

Erection of swaged type Single Steel tubular pole of length 8.5 Mtr with sole/base plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly

Upto 9.0 mtr. Size 0.6x0.6x1.70 mts [H-1/1 (a)]

Supply & delivery of swaged type Single Steel tubular pole of length 8.50 Mtr with sole/base plate & Cap etc.[410 SP-16,79 kg +2.5 kg(base plate)]

S & F 1.2 Mtr long 40 mm Dia Detachable type G.I Single Arm bracket with stifner plate, Pole Cap etc as required incl making through hole on bracket assembly for fixing the bracket rigidly on pole top. [NS]

Extra on items 1& 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S & F 25cmx25cmx10cm GI Loop box, 16SWG & incl. drilled hole in pole [H-1/3(a)(i)]

Painting of Steel Tubular Pole of lengths and no. of coats of paint,as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint

Upto 9.0mtr. Long pole (a)1st coat of aluminium paint over 1 coat of RO priming [H-2/4 (a)(i)]

Upto 9.0mtr. Long pole (ii) 2nd coat of aluminium paint over 1st coat [H-2/4 (a) (ii)]

Painting of Arm brackets of length 1.2 Mtr 1st coat of aluminium paint over 1 coat of RO priming & 1st coat of aluminium paint over 1 coat of RO priming with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint

a) Single Arm Bracket [NS]

Connection between loop box & the HPSV fittings with 2 x 2.5 sq mm PVC insulated copper conductor as to G.S.( for 8.5 mtr pole) [E-9/1(d)]

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint [H-5/5}

Excavation of soil for installation of Earth Electrode and filling & ramming as per GS

For Morum Soil @1cu. Mtr/earth [1(b)/G-1 ]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long With ISI-Medium GI pipe as per GS. [ 2(a)/G-1]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. [G-2/4(a)]

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

32 mm Dia [F-6/11(b)]

50 mm Dia [F-6/11(d)]

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. 4 SWG [5(a)(i)/G-2 ]

Supply and installation of Home UPS, Capacity 2 KVA, 24 Volt operated and output 230 V 50 HZ. (Make- EXIDE / Luminous / Sukam )

Supply and Installation of EXIDE, INVATUBULAR battery, 12 Volt, 180 AH including necessary interconnection Model No: 500+ (42 months warranty).

Supply and Delivery of MS angle battery rack for keeping 2 nos Battery and inverter on the top.

Charges for Dismantled existing wiring materials with fiitting & fixtures.

Supply & installation of CPRI approved cubicle type compartmentalised wall cum floor mounted LT panel board of suitable size and shape for existing panel room and made of 2mm thick CRCA sheet, angle/ flat iron for structural frame work & followed by nine tank pre-treatment of entire enclosure with powder coated finish paint having copper Bus-bar and following equipment & accessories. Protection required of panel is IP-54

Bus-bar: 415V 400A Horizontal Bus-bar system with EPR support for main power distribution by S&F electrolyte tinned copper bar.To supply power to individual section from Bus-bar with suitable size copper bar/ wire with socketing, all joint must be of bolted type construction. Proper colour code to be provided by PVC heat shrink sleeves.

Incoming: a)315A 415V TPN SDF unit (L&T make Cat no. SK95461) with 3 nos. of HRC fuse – 1 no.

Outgoing: a) 100A 415V TPN SDF unit (open execution) (L&T make Cat no. SK95568) with 3 nos. of HRC fuse – 8 nos c) 315A 415V 4P Change over switcht (L&T make Cat no.CO33150OOOO ) with 3 nos. of HRC fuse – 1 no

Constructional Details: The panel to be made by 2mm thick CRCA sheet. The cable gland packing should be 2.5mm thick and having required nos. of hole for cable entry. Cable entry provision to be made from bottom/top of the panel. The panel surface must be pre-treated through 9 tank treatment process before painting by powder coating paint by electrostatic charging system and again to be dried up through heat chamber at 200 degrees Celsius to keep the paint on panel surface with adequate hardness. Cable chamber in the panel shall be 200mm width along the horizontal. The panel shall have suitable size integral and removable lifting lug in required nos. All doors should be hinged type railway type locking arrangement and all opening shall be properly gasketted.

Metering & Indication arrangement: a) LED Multifunction Meter (L&T Make) – 1 no. b) 315/5A CT (Kappa make) -3 nos. c) LED indicating lamp (Siemens make /Esbee make) – 3 nos. d)16A TPMCB-1 no. e) EI danger board – 1 no. All wiring for metering & indication to be done with 1.1KV grade PVC insulated stranded FR copper wire of size 1.5 sq mm, each wire shall have ferrules & lugs at both end. Metering & indication wires shall be nearly bunched separately and adequately supported so as to prevent stress and strain on termination. The material and design should be approved by EIC before fabrication.

DEB SHANKAR LAYEK

RAHUL TRADERS