Construction of Lift at Rajkot City Division -1 @ Old Power House Campus under Rajkot City Circle.

Name of Work : Construction of Lift at Rajkot City Division -1 @ Old Power House

Campus under Rajkot City Circle

ITEM QTY PER RATE AMOUNT

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil 2.00 Cmt 210.42

Excavation for foundation up to 1.5M depth including

sorting out and stacking of useful materials and disposing of

the excavated stuff upto 50M. Lead. (B)Dense or hard soil. 2.00 Cmt 269.87

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(C)

Hard Murrum 2.00 Cmt 460.53

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(D)

Soft rock not requiring Blasting 2.00 Cmt 552.75

Excavation for foundation upto 1.5 m depth including

5 sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(E)

Hard rock 2.00 Cmt 1031.41

Excavation for foundation for depth from 1.5 m to 3.0 m

6 including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter

lead. (D) Soft rock not requiring Blasting 3.00 Cmt 576.18

Excavation for foundation for depth from 1.5 m to 3.0 m

7 including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter

lead.(E) Hard Rock 3.00 Cmt 1071.04

Providing and laying controlled cement concrete M.150 for

8 curing complete excluding cost of formwork and

reinforcement for reinforced concrete work in (A)

Foundations, footings,Base of columns and Mass concrete 1.00 Cmt 3952.22

Filling available excavated earth ( excluding rock ) in

9 trenches, plinth, sides of foundation etc. in layers not

exceeding 20 cm. in depth consolidating each deposited

layer by ramming and watering. 12.00 Cmt 136.11

Filling in foundation and plinth with murrum or selected soil

10 in layers of 20 Cm. thickness including watering ramming

and consolidating etc. complete. 1.00 Cmt 296.70

Providing and laying in position Ready Mixed M-250 grade

concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in

transit mixer for a lead up to 10 kms having continuous

agitated mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying,

Including the cost of centering shuttering finishing and

reinforcement including cost of admixtures in recommended

proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge.

Without Fly Ash (Min cement level as per latest IS 456 shall

be maintained) (Cement level 450 kg )........... For

Foundations, footings, Base of columns and Mass

concrete 3.00 Cmt 6131.79

Providing and laying in position Ready Mixed M-250 grade

concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in

transit mixer for a lead up to 10 kms having continuous

agitated mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying,

Including the cost of centering shuttering finishing and

reinforcement including cost of admixtures in recommended

proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge.

Without Fly Ash (Min cement level as per latest IS 456 shall

be maintained) (Cement level 450 kg ).......... For Walls,

from top of foundation at All Floor Level 32.00 Cmt 8716.64

Providing and laying in position Ready Mixed M-250 grade

concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in

transit mixer for a lead up to 10 kms having continuous

agitated mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work including

13 pumping of R.M.C. from transit mixer to site of laying,

Including the cost of centering shuttering finishing and

reinforcement including cost of admixtures in recommended

proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge.

Without Fly Ash (Min cement level as per latest IS 456 shall

be maintained) (Cement level 450 kg )..... for Slab at All

Floor Level 2.00 Cmt 7753.39

Providing TMT bar FE 500/500D reinforcement for R.C.C.

14 work including bending, binding and placing in position

complete_Ground Floor 1800.00 Kg 76.52

Providing TMT bar FE 500/500D reinforcement for R.C.C.

15 work including bending, binding and placing in position

complete_First Floor 800.00 Kg 77.61

Providing TMT bar FE 500/500D reinforcement for R.C.C.

16 work including bending, binding and placing in position

complete_Second Floor 800.00 Kg 78.70

Providing TMT bar FE 500/500D reinforcement for R.C.C.

17 work including bending, binding and placing in position

complete_Third Floor 600.00 Kg 79.79

Providing TMT bar FE 500/500D reinforcement for R.C.C.

18 work including bending, binding and placing in position

complete_Fourth Floor 800.00 Kg 81.97

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine

sand)_Fly Ash Bricks_Fourth Floor 6.00 Cmt 5845.55

Providing 10MM thick cement plaster in single coat on

Brick/concrete walls for interior plastering level finished

even and smooth in Cement Mortar 1:3 (1-Cement :3-

Sand)_Fourth Floor 8.00 Smt 269.82

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for interior

plasteringand finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand) _Ground Floor 42.00 Smt 187.11

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for interior

plasteringand finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand) _First Floor 27.00 Smt 212.59

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for interior

plasteringand finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand) _Second Floor 27.00 Smt 238.07

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for interior

plasteringand finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand) _Third Floor 17.00 Smt 263.55

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for interior

plasteringand finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand) _Fourth Floor 12.00 Smt 289.03

20mm thick sand faced cement plaster on walls upto height

26 10 metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. 147.00 Smt 329.18

Providing and laying broken China Mosaic Flooring for

terrace using 12mm to 20mm broken pieces of glazed tiles to

be laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar crème out upto surface using white

cement including rounding off junctions and extending them

up to 15cm along the wall, clearing with water and oxalic

acid etc. as directed by EIC. 6.00 Smt 771.98

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.- For Wall 115.00 Smt 87.85

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.- in ceiling 8.00 Smt 93.75

Applying two coats of birla (white cement based) or asian or

equivalent and two coats of primer of approved brand and

manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth. 115.00 Smt 40.19

Applying One coat of primer of approved brand and

31 manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth. 147.00 Smt 28.00

Finishing wall with weather proof exterior emulsion paint

APEX of Asian Paint on wall surface (two coats) to give an

32 required shape even shade after thorughly brushing the

surface to remove all dirt and remains of loose powdered

materials etc. complete 130.00 0.00 140.00

33 Lift/Elevator

(A) GENERAL DESCRIPTION OF LIFTS.

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High

Starting torque Lift 3 phase 440 V A. C. Permanent Magnet

Synchronous motor of proper rating with high efficiency

shall be used.[2] Micro processor based / PLC, ACVVVF,

vector control drive with encoder feedback closed loop

system shall be used for lift car and door operation which

shall be full collective selective operation hall call demand

response, UP/DOWN hall stops, Main, Up/ Down

Contactor with overload and phase reversal relay and safety

[3] Car with M S platform with bracings of adequate size

and to sustain the impact load cabin + passenger with safety

factor of fire for steel and side panels of Stainless steel of

sheet of grade 304 duty. Car ceiling will be S.S. finishes

with aesthetic appearance with LED ceiling lights. Car

flooring shall be of anti skid PVC with choice of colour of

engineer in charge. Car doors shall be of stainless steel grade

304, hairline finish with centre opening / telescopic

automatic doors. Car panel will also be S.S. 304 finished

with emergency stop device, mechanical door safety device,

facility of auto/ attended mode. All car panel buttons and all

floor switches must be with brail language as per lift act.

[4] All landing doors must be fire rated for 2 hour shall be

fully automatic centre opening/ telescopic opening made of

hairline finish steel grade of 304 with key holes and infrared

curtains with Unlocking facility from outside

[5] Appropriate battery operated emergency light in the car

along with alarm switch shall be provided. Also, Emergency

Light & Fan should start immediately without any Time

Delay as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow

along with floor position indicator shall be provided inside

the car and at all floors.

[7] Full height infra red curtain with multiple cross /

crossing light beams shall be provided.[8] Automatic Rescue

Device (ARD) shall be provided accordingly of passenger

capacity with Manual Rescue Operation ( Manual Cranking

[9] Audio visual indication in the lift car showing over

loading shall be provided such that doors kept open till

excess load is removed.

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan as per passenger capacity with automatic sleep

timer shall be provided.

[12] Voice annunciator with suitable music shall be

provided in lift car.

[13] Self diagnostics system for operational and safety

parameters shall be provided in control panel.

[14] Mechanical over speed governor with governor

calibration as per actual site parameters and submission of

calibration certificate submission, door key holes in the floor

doors, fireman switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine

room and monkey ladder for lift pit should be provided by

the lift agency, along with the other steel structure works,

foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without

any extra cost, where ever required as / if directed by

engineer in charge.

[17] Permanent wiring with necessary safety devices like

RCCB in all circuit, Over Voltage Under Voltage protection

and THD eliminator in circuit for lift machine room and lift

well with proper numbers of light points, with fixtures,

exhaust fan and plug points shall be provided by the agency.

Only 3 phase Power Supply shall be made available by

department in lift machine room. Necessary Earthing as per

Lift Act/Rules shall be arranged by Lift Agency.

[18] Any civil/ electrical works for additional and alteration

in lift shaft and machine room related to erection of lift shall

be made by lift agency without any extra cost.

(granite/marble fixing around all landing door openings are

not in lift agency’s scope.)

[19] Agency has to provide all working drawings and

documents and liaison services for obtaining all necessary

permission from lift inspector and other authorities.

[20] acrylic transparent licence/display A4 size holder in lift

[20A] As per statutory requirement of Govt. Of Gujarat lift

& escalator act 2000, lift agency has to provide

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift inspection during/after lift

erection and provide report by third party authorized by

concern licensing authority 5.agency has to provide third

party insurance upto completion of free maintenance period

and submit the document for the same.

[21] Car Panel Operating Buttons with floor position

indicator/buttons must be of Auto Glow type clearly visible

when view from inside cabin.

[22] For Physically Handicapped person Full Length

Handrails of hairline finish steel grade of 304 should be

provided at appropriate height on the Rear & Side Wall

Panels in Lift Car.

Supplying, Erecting, Testing & Commissioning the

passenger / stretcher lift having following main features:

Passengers, Ground plus 2 upper floors with Rated Speed

of 1.0 m/sec. (B) With General Specification attached

herewith. Cat.III 1.00 Nos 1223040.00

(B) Bidder's Offer _____% Above/Below of (A)

(C) Grand Total (C = A + B)

(C) Grand Total (C = A + B)

(D) Goods & Service Tax ( D = C x GST in % Prevailing or Applicable )

(E) Grand Total Including GST ( E = C + D )

(E) Grand Total Including GST ( E = C + D )

Final Offer with GST In Word:

I / WE HERE BY AGREE TO CARRY OUT ABOVE SAID WORK AT______%

(A) WITHOUT THE

RS.(IN COST MENTIONED AS ABOVE AND THUS THE AMOUNT

(B)WITH GST RS.(IN FIGURE)______________________.

Signature of contractor with seal CHIEF ENGINEER (MATERIAL),

PGVCL, CORPORATE OFFICE,