Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹16.0 L
EMD Value
₹16,000
Closing Date
16 Nov 2026, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER,ELECTRICAL (R & B) DIVISION, JUNAGADH
S.R. to Replacing Old Bolard Lights and Compound Lights in Collector Bunglow Junagadh, Dist - Junagadh.
364567
E-Tender Notice No.09 of 2026-27
Open
Electrical - All
Works
Junagadh
8 documents required · 7 mandatory · 1 optional
₹900
Executive Engineer, Electrical (R&B) Division, Junagadh
₹16,000
7 Nov 2026
7 Nov 2026
7 Nov 2026
16 Nov 2026
7 Nov 2026
120 days
Name of Work:- S.R. to Replacing Old Bolard Lights and Compound Lights in Collector Bunglow Junagadh, Dist -
Quantities Estimated Rate
estimated but Total amount
estimated but Total amount
may be more or Description of Item. according to
No. In Figures In Words
1 300.00 Mtr. Replacing old and unserviceable by Supplying and erecting Rs. 58.58 Rupees Fifty Eight And Rs.
Flexible PVC insulated multi strand multi core 1.1 kV grade ISI Paise Fifty Eight Only
marked copper wires of following size to be erected as directed.
(e) 1.50 Sq.mm 3 core round PVC sheathed
2 11.00 Ea. Replacing old and unserviceable by new Supplying and erecting Rs. 5080.30 Rupees Five Thousand Rs.
LED street light / Flood light fittings with High power White LEDs Eighty And Paise Thirty
wattage of 3 Watt and above assembled on single MCPCB, Only
efficiency more than 130 lm/w and corrosion free High pressure
die cast aluminum housing with smooth finish powder coated and
heat sink extruded aluminium with diffuser and Polycarbonate
optics/ lenses, with toughened glass with company mark/name
engraved or embossed 160 to 270 V,Power Factor more than 0.95,
THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,
Luminaire efficacy> 100 lumens/watt . LED driver efficiency >
%.( fittings required LM-79 & LM-80 certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity
between the ranges shown.)
(A) Street Light (IP-65), Surge protection -4KV integral and ,Light
must have 440VAC line supply with over-voltage protection.
(iii) 60 - 89 watts
3 7.00 Ea. (B) Flood Light (IP-65), Surge protection -4kV integral and ,Light Rs. 5175.24 Rupees Five Thousand Rs.
must have 440VAC line supply with over-voltage protection. One Hundred Seventy
(iii) 60 - 89 watts Five And Paise Twenty
Cat-lll Four Only
4 62.00 Ea. (C) Post Top Lantern LED fitting comprises of finish cast Rs. 4096.56 Rupees Four Thousand Rs.
aluminum spigot and spun aluminum canopy fixed with opal Ninety Six And Paise Fifty
polycarbonate, pipe arrangement for vertical mounting driver and Six Only
accessories wired up to terminal block.IP
5 1.00 Ea. Providing and erecting Approved make Four pole moulded case Rs. 6790.23 Rupees Six Thousand Rs.
circuit breaker having breaking capacity ICU of 25 KA. at 415 Seven Hundred Ninety
V,having normal current rating up to 25 A to 100A. with Fixed And Paise Twenty Three
thermal & magnetic release suitable to work on A.C. supply 50 Hz. Only
with all internal connections, spreader tinned copper & complete
erected in existing 16 G.M.S. housing.
ICS=100% of ICU only Cat III
6 80.00 Ea. providing and erecting Miniature circuit breaker single pole 0.5A Rs. 297.95 Rupees Two Hundred Rs.
to 2A system and having breaking capacity 10 KA to be erected in Ninety Seven And Paise
existing box. confirming to IS 8828/1996 with ISI Mark Ninety Five Only
7 3.00 Ea. Replacing old and unserviceable by new Providing & erecting Rs. 702.96 Rupees Seven Hundred Rs.
415V MCB Four Pole Switch for Lighting Load (B curve) having Two And Paise Ninety Six
10KA breaking capacity & confirms to IS :8828 in existing box Only
having following capacity
8 6.00 Kg. Providing and erecting Annealed bare Copper wire 4.064mm to Rs. 794.87 Rupees Seven Hundred Rs.
1.626mm. Ninety Four And Paise
Eighty Seven Only
9 9.00 Ea. Providing and erecting Pipe type earthing having 150 cms.long Rs. 368.65 Rupees Three Hundred Rs.
and 2.5 cms. dia. galvanised iron pipe with coupling and buch Sixty Eight And Paise
buried in specially prepared earth pit complete with necessary 8 Sixty Five Only
SWG earth wire.
10 9.00 Ea. For using salt and charcoal / coke as required for pipe type Rs. 171.70 Rupees One Hundred Rs.
earthing. Seventy One And Paise
11 1.00 Ea. Supplying & erecting earth pit of minimum bore dia.150mm size Rs. 4591.46 Rupees Four Thousand Rs.
approved make Earthing Electrode consisting Pipe-in-Pipe Five Hundred Ninety One
Technology as per IS 3043-1987 made of corrosion free hot And Paise Forty Six Only
dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200
Micron galvanising, Inner pipe dia of 25 mm having 200-250
Micron galvanising, connection terminal dia of 12mm with
constant ohmic value surrounded by highly conductive compound
with high charge dissipation suitable for following type of
applications with chamber and heavy duty cover. (A)(approved
make OEM has to submit test certificate including value of earth
resistance of installation duly stamped and signed by agency and
officer Incharge has to ensure the value of earthing resistane
mentioned in test Certificate) & having back filling compound of
(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /
meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no
load & dry form, Sulphar content:- <2%(C) Back fill Compound :-
Earthing compound should be capable to retain moisture for long
time Necessary test report must be submitted by Agency.
(a) For Electrical Installation up to 440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
12 150.00 Kg. Providing , erecting , fabricating the M.S. structure as per Rs. 77.77 Rupees Seventy Seven Rs.
requirement on site incorporating proper size of M.S. And Paise Seventy Seven
angles,square,round, flats, bars, channels, sections complete with Only
cutting, welding, grinding & finishing duly painted with one coat
of red oxide with erection on site as per direction of engineer in
charge with necessary grouting, cementing, plastering & finishing
13 1110.00 Mtr. Replacing old and unserviceable by new Providing and erecting Rs. 151.50 Rupees One Hundred Rs.
FRLS-XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Fifty One And Paise Fifty
Solid Aluminium conductor for 1.1 kV. to be laid on wall with Only
necessary clamps or in existing trench / pipe of following size of
(B) 4 core 6 Sq. mm
14 140.00 Mtr. Replacing old and unserviceable by new Providing and erecting Rs. 184.83 Rupees One Hundred Rs.
FRLS-XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Eighty Four And Paise
Aluminium conductor for 1.1 kV. to be laid on wall with Eighty Three Only
necessary clamps or in existing trench / pipe of following size of
(A) 4 core 16 Sq. mm
15 950.00 Mtr. Making trench in soft soil of suitable width of 90 cm deep for Rs. 55.55 Rupees Fifty Five And Rs.
laying cable or locating the fault all over the run and back filling Paise Fifty Five Only
the same and making the surface as normal ground.
16 96.00 Mtr. Making trench in Hard Murrum / Tar Road of suitable width of 90 Rs. 357.54 Rupees Three Hundred Rs.
cm or required depth for laying any size of cable or locating the Fifty Seven And Paise
fault all over the run and back filling the same and making the Fifty Four Only
surface as normal ground.
(B) If additional machinery like hammer driller or JCB use [Add]
17 10.00 Mtr. Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. Rs. 226.24 Rupees Two Hundred Rs.
below ground across the road crossing or on floor with necessary Twenty Six And Paise
material in an approved manner and making the ground as per Twenty Four Only
(F) 100 mm dia.
18 1068.00 Mtr. Providing & laying approved make Double walled corrugated Rs. 62.62 Rupees Sixty Two And Rs.
pipes (DWC) of polyethylene(conforming to IS 14930 II )with Paise Sixty Two Only
necessary connecting accessories of same material at required
depth in existing trench for laying of cable. below ground / road
surface for enclosing cable
(A)50 mm outer dia
19 168.00 Ea. Providing and, fixing heavy duty flange type brass cable gland Rs. 38.38 Rupees Thirty Eight And Rs.
with rubber ring for PVC insulated armoured cable complete with Paise Thirty Eight Only
out going tails, insulating tape etc for following size of cables.
(B) 2 to 4 core 6 Sq. mm
20 2.00 Ea. (D) 2 to 4 core 16 Sq. mm Rs. 47.47 Rupees Forty Seven And Rs.
Paise Forty Seven Only
21 672.00 Ea. Solder less crimping type Aluminium lugs conforming to IS Rs. 6.06 Rupees Six And Paise Six Rs.
suitable for cable of following size evenly crimped with high Only
pressure tool & connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved manner.
22 8.00 Ea. (C) 16/25 Sq.mm. Rs. 15.15 Rupees Fifteen And Paise Rs.
23 9.00 Ea. Replacing old and unserviceable by new Supplying and erecting Rs. 9011.22 Rupees Nine Thousand Rs.
approved make Octagonal pole made from HR sheet steel. The Eleven And Paise Twenty
pole should be made as per IS. and shall be coated with hot dip Two Only
galvanizing as per IS 2629/2633/4759, suitable suspend local
wind speed with integral Junction box consist of terminal plate of
min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail
for MCB Mounting, stud type terminal and arrangement for cable
termination to be erected With Suitable foundation (Included) as
per details given by manufacturer considering site requirement.
(D) 6 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm
thickness with 200mmX200mmX12mm base plate, 4-M20 Bolts
and 600mm long with necessary G.I. J Bolts .Approx Pole weight
24 62.00 Ea. Supply of approved make FRP Pole having following Rs. 11261.50 Rupees Eleven Thousand Rs.
specifications: FRP Light Pole made by CNC filament winding Two Hundred Sixty One
machine using thermoset resin polyester/epoxy resin system) And Paise Fifty Only
having minimum 62% glass content. The pole should be in one
piece and tapered round in shape, having smooth finish and
should be totally free from corrosion as well as non conductive &
shock proof Pole should be provided with FRP Anchor Base and
it should be heavy duty, or MS Material duly painted with Epoxy
paint. Pole should be flame retardant as per IS 6746. Resin used
shall be UV resistance and pigmented. A highly weather resistant
polyurethane coating shall be applied to the pole after applying
suitable primer system that ensures proper adhesion of the paint.
Minimum coating thickness shall be 80 to 100 micron. Deflection
of the pole shall not exceed more than 10% of the length of pole
for the given load“ Pole should be generally made as per the
dimensional data, performance criteria and some
interchangeability features of poles as per standard ANSI C
136.20 latest version or ASTM D 4923/01 including cable
termination box with necessary accessories . The size of pole and
type of installation with foundation as per manufacturer details
and site requirement are as below .
(1) Suitable for base plate mounting single arm Bracket.
[D] Overall length of 4 Mtr. Average Thickness: 7mm.
Top/ Bottom OD Dia A/F 89/145 mm ± 2mm approx. Approx.
Weight of Pole 19 kg approx. (Without Base)
Anchor Base (Size 250X250 & 12mm th.)
Note : Pole Must be Suitable for mounting of Post Top Lantern
25 7.00 Ea. Replacing old and unserviceable by new Supplying & erecting Rs. 297.95 Rupees Two Hundred Rs.
approved make SMC press moulded composite FRP. loop-in, loop- Ninety Seven And Paise
out approx. 2mm thick box complete with Bakelite connector strip Ninety Five Only
5way(3P+N+E),DIN rail for mounting mob & hinged doors as per
requirement having locking arrangements with mounting clamp
with nuts, bolts & washers suitable for erection on pole with cable
clamps& earth bolt of following size of box.
(D) 140mm x 140mm x 100mm [deep]
26 7.00 Ea. Replacing old and unserviceable by new Providing and erecting Rs. 683.77 Rupees Six Hundred Rs.
Street Light pole bracket comprising main B Class GI pipe of 4.2 Eighty Three And Paise
cm/require outside dia. complete with suitable B Class G.I. sleeve Seventy Seven Only
tubing of approx. 45cms.length and suitable for 76.5 mm /80mm
/ required size of pole top having sufficient fasteners for fixing the
brackets and having spread of 1.5.mtr. length with 110 deg.with
vertical plane & suitable welded stays, reducer and with check
nuts complete painted with one coat of Red oxide / PU base
primer and two coats of Aluminium / PU paint. paint with
following nos of arms.
[A] Single Arm Bracket 1.5 Mtr
27 8.00 Mtr. Replacing old and unserviceable by new Supplying and erecting B Rs. 215.13 Rupees Two Hundred Rs.
class Galvanized iron pipe having smooth finished bore of the pipe Fifteen And Paise
on both ends erected nuts and bolts along the pole / wall shaping Thirteen Only
the pipe as per site requirement. Pipe dia as following.
28 1.00 Ea. Replacing old and unserviceable by new Supplying & erecting IP Rs. 16691.26 Rupees Sixteen Thousand Rs.
55 grade following size section pillar fabricated from joint less Six Hundred Ninety One
M.S. Sheet with angle iron legs made from jointless M.S. Angle And Paise Twenty Six
with cable clamps to be buried in ground to have appropriate Only
erection to work uniform until erected with cement concrete
foundation and 45 cm high bricks work finishing with plaster etc.
hinged double door internally supported on both side,
with internal and outside looking arrangement with lock and keys
in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded
and other with nut and bolt for erecting Bakelite sheet. Painting
the Section Pillar inside and out side with three tank powder
coated paint. section pillar roof should be without joint with
water leakage proof & tested as per IP 55 test & followed by IS
(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS
Sheet with angle iron legs 95 cm long made from 40 X 40 X 6 mm
thick MS angle.
29 1.35 Sq. Mtr Supplying and erecting HYLAM sheet on existing angle iron Rs. 1156.45 Rupees One Thousand Rs.
frame.for following thickness One Hundred Fifty Six
(C) 6mm And Paise Forty Five Only
30 1.00 Ea. Supplying & erecting approved make Digital time switch having Rs. 3168.37 Rupees Three Thousand Rs.
lithium cell 6 years operative and operate battery backup 1 One Hundred Sixty Eight
channel day clock with 14 memory programme, suitable to And Paise Thirty Seven
operate on 240V + 5%, 16A with, floating contacts Minimum Only
switching setup time 1 minimum & LCD display. Also comprised
permanent ON/OFF switching. Programming switches & housed
in fire proof thermoplastic enclosure & transparent cover erected
as required with necessary connection erected as directed.
31 1.00 Ea. Supplying & erecting power contactor ,AC3 duty for time switch Rs. 2782.55 Rupees Two Thousand Rs.
complete erected as per direction Cat III Seven Hundred Eighty
(D) 4 pole 440V 40 Amp. Two And Paise Fifty Five
Total Amount Rs.
Total Amount Rs.
In Words : Rupees Fifteen Lakh(s) Ninety Five Thousand Four Hundred Nineteen And Paise Ninety Nine Only
Note : This estimate has been prepared on the new S.O.R. which is exclusive of G.S.T.
Hence G.S.T. additional will be paid to the agency as per existing guidelines.
I/We am/are willing to carry out the work at ____________% above/below (in Figures)__________________________ percent Above / below (in words)
the estimated rates mentioned above amount of my\our tender works out as under :-
Estimated amount put to Tender Rs._________________
Deduct _____% below Rs._________________
(-)Less For Dismantle Material Rs._________________
Net Amount Rs._________________
Estimated amount put to Tender Rs. _________________
(-)Less For Dismantle Material Rs. _______________
Net Amount Rs. _________________
A I/We hereby declare that I/we have visited the site and fully acquainted my self / our selves with the local situation regarding material,labour
and other factors pertaining to the work before submitting this tender.
B I/We hereby declare that I/we carefully studied the conditions of contract, detailed technical specifications and other tender documents of
this work and agree to execute the same accordingly.
(Signature of the Contractor) Deputy Executive Engineer,
Electrical (R&B) Sub Division,
Executive Engineer,
Electrical (R&B) Division,
Note 1 Please strike out whichever is not applicable.
2 In the case of tendered amount being quoted incorrectly the quoted pered percentage Below/Above will be considered as final.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Schedule-A.pdf
Schedule-B.pdf
DISMANTLE MATERIAL STATEMENT.pdf
Notice Inviting Online Tender.pdf
Standard Bidding Document.pdf
E-Tender Notice No.09 of 2026-27.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .