Pothundy Dam-Urgent maintenance of RB and LB canal shutter, spillway, cross regulator and surplus shutters.

Amount

OVERHAULING of GANTRY CRANE & APPLYING CARDIUM COMPOUND, SUPPLY, FABRICATION, PAINTING & ERECTION OF CAGE for ladder of GANTRY CRANE of LBC

GANTRY CRANE - OVERHAULING of hoisting mechanism, FILLING of new Gear oil in reduction Gear boxes, GREASING on gear teeth, plummer block, wheels, rack, shafts and all movable parts. ALIGNMENT & CHECKING of entire mechanisms and wire rope, REPLACEMENT of damaged bolt and nuts as per the instructions from the departmental officers at site. Including cost of materials, labour charges etc. complete

APPLYING CARDIUM COMPOUND on WIRE ROPE in sufficient thickness. including cost of all materials, labour etc complete.

Supply of MS flats including cost of conveyance charges

Fabrication and supply of Hoisting bridge unit in structural steel confirming to IS2062Gr including ladder, covers for hoisting unit etc as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete but excluding material already supplied and weight of pipes for hand rails etc

Erection of the hoisting bridge unit including handrails , ladder and platform etc. in correct alignment and anchoring it ; setting and aligning the covers of the hoisting unit etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

DISMANTLING, OVERHAULING, ASSEMBLING AND REFIXING OF ROLLER WHEEL, GUIDE WHEEL AND WATER ESCAPE VALVE OF EMERGENCY GATE of LBC

od11599/2018_2019/MH : DISMANTLING, OVERHAULING, ASSEMBLING and REFIXING the ROLLER WHEELS of SLUICE GATE or EMERGENCY GATE. Taking out the shafts, bearing, changing old corroded bolts and nuts, cleaning parts, greasing and reassembling with new or existing bearings etc. including cost of materials labour charges etc. complete.

od11600/2018_2019/MH : DISMANTLING, CLEANING, LUBRICATING and REFITTING the large & small type GUIDE WHEELS of EMERGENCY GATE and OVER HANG HOOKING ARRANGEMENT.

od11601/2018_2019/MH : DISMANTLING, RE-CONDITIONING, ASSEMBLING, and REFITTING the WATER ESCAPE VALVE of EMERGENCY GATE.

CLEANING, OVERHAULING, LUBRICATING OF PULLEY FOR WIRE ROPE AND LOCKING & UNLOCKING SYSTEM OF OVER HANG HOOKING ARRANGEMENT for EMERGENCY SHUTTER of LBC

CLEANING, OVERHAULING, LUBRICATING of PULLEY for wire rope and LOCKING & UNLOCKING SYSTEM of OVER HANG HOOKING ARRANGEMENT.

TRIAL RUNNING THE EMERGENCY GATE for LBC

Trial Run of the Emergency Shutter by both manual operating system and driven by the prime mover already provided, including cost of all labour , incidental charges, hire charges of generator set, tools and plants etc and correcting the final alignment wherever necessary as per the direction of the departmental officers at site. (Complete for lowering and lifting One time)

DEMOLISHING and CONCRETING of LBC and RBC

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

ARRESTING the hoisting mechanism of sluice shutter and DISMANTLING of old corroded extension channel, sluice well cover, extension channel support of LBC and RBC

TEMPORARY PLATFORM [40 times usage as life period (assumed) for these materials, hence cost for 1 time used]

LIFTING, LEADING and STACKING the HOISTING MECHANISM with SCREW ROD for SLUICE from the sluice well safely at a convenient place

DISMANTLING of old corroded EXTENSION CHANNEL, Sluice well platform and Sluice well cover. LIFTING and LEADING & STACKING the SCRAP MATERIALS. including cost of all materials, labour charges, hire charges, energy charges, conveyance, all leads and lifts etc. complete.

LIFTING and ARRESTING the sluice shutter from the groove for overhauling the roller, checking of groove, replacement of rubber seal & painting of LBC

LIFTING and ARRESTING the SLUICE GATE from the groove to sluice well platform for overhauling the roller, checking of groove, replacement of rubber seals & painting

OVERHAULING of SLUICE GATE, roller, replacing rubber seal of LBC

DISMANTLING & STACKING the EXISTING ALL KIND of RUBBER SEAL for SLUICE GATE or EMERGENCY GATE.

Supply of MS flats including cost of conveyance charges

Fabrication and supply of Structural steel wheel gate and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

Erection of the gates safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site

Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

SUPPLYING, STACKING and FIXING of ANGULAR BULB NOSE RUBBER SEAL for corner (400mm X 400mm)

Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

DISMANTLING, OVERHAULING, ASSEMBLING and REFIXING the ROLLER WHEELS of SLUICE GATE or EMERGENCY GATE. Taking out the shafts, bearing, changing old corroded bolts and nuts, cleaning parts, greasing and reassembling with new or existing bearings etc. including cost of materials labour charges etc. complete.

SUPPLY, FABRICATION AND ERECTION of EXTENSION CHANNEL UNIT,EXTENSION CHANNEL GUIDE BEAMS, SLUICE WELL PLATFORM,SLUICE WEL HANDRAILS & SLUICE WELL COVER of LBC and RBC

Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

Supply of MS checquered plates including cost of conveyance charges

SUPPLYING & STACKING of Dia 32 mm G.I. PIPE

Supply of BOLT and NUT up to 300mm Length including cost of conveyance.

Fabrication, Supply, erection and assembling in correct position and alignment by welding SS EMBEDDED PARTS in 304L Grade like roller track, seal track,Seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials,labour,machinery for planing, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete

Fabrication and supply of Structural steel wheel gate and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

TEMPORARY PLATFORM [40 times usage as life period (assumed) for these materials, hence cost for 1 time used]

DRILLING and FASTENING with EXPANSION BOLT M12x75 mm length in concreteincluding conveyance and labor charges complete.

Erection of the gates safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site

LEADING, LOWERING and FIXING the HOISTING MECHANISM with SCREW ROD in correct alignment

BUTT HINGE

FIXING the HOISTING MECHANISM on the platform and OVERHAULING the hoisting mechanism, SUPPLY and FIXING NEW ENGRAVES SS SCALE for LBC & RBC

LEADING, LOWERING and FIXING the HOISTING MECHANISM with SCREW ROD in correct alignment

SLUICE GATE - OVERHAULING of hoisting mechanism, FILLING of new Gear oil in reduction Gear boxes, GREASING on screw rod and all movable parts. ALIGNMENT & CHECKING of entire mechanisms, REPLACEMENT of damaged bolt and nuts as per the instructions from the departmental officers at site. Including cost of materials, labour charges etc. complete

Supply of SS 304L plates including cost of conveyance charges

ENGRAVING the Stainless steel scale for measuring sluice gate vent height with reference to sill level.

FIXING the engraved Stainless steel scales for measuring sluice gate vent height with reference to sill level.

PAINTING of sluice gate and its hoisting mechanism, extension channel unit, hoisting mechanism platform and sluice well cover LBC and RBC

Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

TRIAL RUNNING THE SLUICE GATE BY MANUALLY - LBC

ERECTION & TRAIL RUNNING the SLUICE GATE by manually including the cost of all labour etc complete.

OVERHAULING of the HOISTING MECHANISM, GREASING the SCREW ROD and PAINTING, FIXING the HOISTING GIRDER of SURPLUS to the existing concrete structure using MS flats and round bars

Supply of MS flats including cost of conveyance charges

Supply of MS round bar including cost of conveyance charges

PATCH WORK.

DISMANTLING, OVERHAULING and REFITTING the WORM & PINION

LABOUR charges for DISMANTLING of lifting mechanism mounting STOOL

Dismantling, lifting the shutter from the groove for painting. including cost of all materials, labour charges, hire charges, energy charges, conveyance, all leads and lifts etc. complete.

CLEANING, SUPPLYING and APPLYING GREASE on EXISTING SCREW ROD for CANAL GATE

Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

ERECTION of the CANAL GATE safely in the grooves

LABOUR charges for FITTING of lifting mechanism mounting STOOL

SUPPLY & FIXING of split type internal threaded MECHANICAL STOPPER thickness = 20mm, (OD-ID)=30mm

OVERHAULING of the HOISTING MECHANISM, GREASING the SCREW ROD, PROVIDING MECHANICAL STOPPERS, PROVIDING LOCKING MECHANISM for SYNCHRONISING SHAFT and PAINTING the shutters and hoisting mechanisms of the CROSS REGULATOR

DISMANTLING, OVERHAULING and REFITTING the WORM & PINION

LABOUR charges for DISMANTLING of lifting mechanism mounting STOOL

Dismantling, lifting the shutter from the groove for painting. including cost of all materials, labour charges, hire charges, energy charges, conveyance, all leads and lifts etc. complete.

CLEANING, SUPPLYING and APPLYING GREASE on EXISTING SCREW ROD for CANAL GATE

Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

ERECTION of the CANAL GATE safely in the grooves

LABOUR charges for FITTING of lifting mechanism mounting STOOL

SUPPLY & FIXING of split type internal threaded MECHANICAL STOPPER thickness = 20mm, (OD-ID)=30mm

Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

SUPPLYING and STACKING of PAD LOCK.

SUPPLY & STACKING of GREASE NIPPLE for the worm and pinion.

PATCH WORK.

INCREASING the height of EXISTING HANDRAIL, PROVIDING PLUMMER BLOCK, BUTT HINGE,BOLTS, CHECK NUT etc. and PATCH WORK for the SPILLWAY HOISTING MECHANISMS

BUTT HINGE

Providing DRAIN HOLES of required diameter.

Supply of PLUMMER BLOCK SNA 513TC to Suit for 60mm dia Line Shaft with 1213 EK Bearing + H213 adapter sleeve

Supply of BOLT and NUT up to 300mm Length including cost of conveyance.

SUPPLYING & STACKING of Dia 40 mm G.I. PIPE

Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

Fabrication and supply of Structural steel wheel gate and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

Erection of the hoisting bridge unit including handrails , ladder and platform etc. in correct alignment and anchoring it ; setting and aligning the covers of the hoisting unit etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

PAINTING with 2 coats of ALUMINIUM PAINT over 1 coat of ZINCHROMATE PRIMER as per IS1477:1994 after HAND and POWER TOOL cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

PATCH WORK.

SANILKUMAR S A

Bidder Name

KOOTHRADANS

SANILKUMAR S A