Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.4 LAccepted-AOC AKASHGANGA SUKANTA MARG MONIRAMPORE BARRACKPORE WEST BENGAL 700120 | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | ₹39.4 L Quoted ₹39.5 L | L1 | Accepted-AOC Lowest bidder |
| 2 | L2₹41.3 L+₹1.8 L (4.66%)Rejected-Finance 106 1 RAJA RAMMOHAN SARANI KOLKATA 700 009 | KOLKATA | WEST BENGAL | 700009 | ₹41.3 L+₹1.8 L (4.66%) | L2 | Rejected-Finance Higher bid value |
| 3 | L3₹42.3 L+₹2.8 L (7.17%)Rejected-Finance | ₹42.3 L+₹2.8 L (7.17%) | L3 | Rejected-Finance Higher bid value |
| 4 | L4₹42.9 L+₹3.4 L (8.72%)Rejected-Finance | ₹42.9 L+₹3.4 L (8.72%) | L4 | Rejected-Finance Higher bid value |
| 5 | L5₹44.4 L+₹4.9 L (12.5%)Rejected-Finance | ₹44.4 L+₹4.9 L (12.5%) | L5 | Rejected-Finance Higher bid value |
| Sl No | Description | Qty | Unit | M/S H.P Singha L7 | BHASKAR SUPPLY AGENCY L2 | MAZUMDER AND CO L3 | K. K. CONSTRUCTION L8 | R N CHATTERJEE L6 | TAMALIKA ENTERPRISE L4 | SREE GURU CONSTRUCTION CO L1 | SITALA COMMERCIAL AND CONSTRUCTION COMPANY L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for removing plants including roots by dismantling of brick work/PCC/RCC including necessary scaffolding any type any location/position i.e. Roof, parapet, wall, near pipes etc and applying concentrated hydrocholoric or sulphuric acid after removing roots for preventing the growth and making good disturbed portion using PCC (1:2:4) type B0 & 10mm thick plaster in ceement mortar (1:3), size of disturbed portion 150mm x 150mm x 200mm complete all as specified and directed. | 165 | EACH | 225 ₹37,125 | 118 ₹19,470 | 120 ₹19,800 | 235 ₹38,775 | 134 ₹22,110 | 130 ₹21,450 | 100 ₹16,500 Lowest | 141 ₹23,265 |
| 2.00 | M&L for applying two coat of oil emulsion distemper with roller over old decorated plaster surfaces of wall after preparation of surfaces complete all as specified and directed. | 4,600 | SQM | 90 ₹4,14,000 | 78 ₹3,58,800 Lowest | 87 ₹4,00,200 | 95 ₹4,37,000 | 91 ₹4,18,600 | 85 ₹3,91,000 | 80 ₹3,68,000 | 95 ₹4,37,000 |
| 3.00 | M&L for applying one coat of 100% Premium acrylic emulsion paint(using AIR-LESS PAINT SPRAYER) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces by using AIR-LESS PAINT PRIMER SPRAYER using smart technique including preparation of old surface of wall using manual sand papers(where reqd) of approved grade, washing down/cleaning the surface complete all as specified and as directed. | 2,000 | SQM | 175 ₹3,50,000 | 128 ₹2,56,000 | 131 ₹2,62,000 | 176 ₹3,52,000 | 124 ₹2,48,000 | 122 ₹2,44,000 | 125 ₹2,50,000 | 121 ₹2,42,000 Lowest |
| 4.00 | M&L for applying one coat of synthetic enamel paint (1st grade quality) after preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm in width or girth complete all as specified and directed. | 3,200 | SQM | 48 ₹1,53,600 Lowest | 60 ₹1,92,000 | 62 ₹1,98,400 | 49 ₹1,56,800 | 65 ₹2,08,000 | 55 ₹1,76,000 | 58 ₹1,85,600 | 66 ₹2,11,200 |
| 5.00 | M&L for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface. | 1,400 | SQM | 85 ₹1,19,000 Lowest | 113 ₹1,58,200 | 105 ₹1,47,000 | 86 ₹1,20,400 | 125 ₹1,75,000 | 117 ₹1,63,800 | 105 ₹1,47,000 | 128 ₹1,79,200 |
| 6.00 | M&L for two coats of smooth interior acrylic emulsion with Texture finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltrs(undiluted) /10 sq mtrs diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions complete all as specified and directed. | 120 | SQM | 575 ₹69,000 Lowest | 677 ₹81,240 | 670 ₹80,400 | 580 ₹69,600 | 740 ₹88,800 | 720 ₹86,400 | 685 ₹82,200 | 754 ₹90,480 |
| 7.00 | Taking down cement plaster of any description on brick or stone or concrete surface of wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. | 700 | SQM | 48 ₹33,600 | 55 ₹38,500 | 80 ₹56,000 | 49 ₹34,300 | 75 ₹52,500 | 60 ₹42,000 | 69 ₹48,300 | 45 ₹31,500 Lowest |
| 8.00 | M&L for rendering 15mm thick in cement mortar (1:6) on brick work or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed. | 350 | SQM | 263 ₹92,050 Lowest | 295 ₹1,03,250 | 290 ₹1,01,500 | 265 ₹92,750 | 308 ₹1,07,800 | 300 ₹1,05,000 | 298 ₹1,04,300 | 300 ₹1,05,000 |
| 9.00 | M&L for rendering 15 mm thick on fair face of brick works or concrete surfaces of walls with cement mortar (1:4) in two coats (10mm thick backing coat + 5mm thick plaster) mixed with WPC @200ml per 50 Kg of cement on 5mm thick plaster, finished the surfaces even and smooth without using extra cement complete all as specified and directed.
(Note : WPC will be measured and paid separately under relevant item.) | 300 | SQM | 350 ₹1,05,000 | 310 ₹93,000 | 306 ₹91,800 Lowest | 354 ₹1,06,200 | 350 ₹1,05,000 | 340 ₹1,02,000 | 315 ₹94,500 | 335 ₹1,00,500 |
| 10.00 | M&L for rendering 5mm thick in cement mortar (1:3) on ceiling, chajja etc surface finished even and smooth without using extra cement complete all as specified and directed. | 50 | SQM | 225 ₹11,250 | 191 ₹9,550 Lowest | 198 ₹9,900 | 215 ₹10,750 | 220 ₹11,000 | 240 ₹12,000 | 195 ₹9,750 | 213 ₹10,650 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
27 Jun 2025, 6:00 pmClosed
GE BARRACKPORE
Office of the GE BARRACKPORE, KOLKATA - 700120
SMART PERIODICAL SERVICES TO MARRIED AND OTM ACCN TO VARIOUS BLDGS AT ZONE B AT BARRACKPORE CANTT UNDER GE BARRACKPORE
2025_MES_711456_1
8118/E8
Open Tender
Civil Works
Works
180 days
Barrackpore
AS PER TENDER DOCUMENT
3 documents required · 3 mandatory
₹500
GE BARRACKPORE
₹80,000
Yes
23 Aug 2025
30 May 2025
30 Jun 2025
30 May 2025
27 Jun 2025
13 Jun 2025
Amount
M&L for removing plants including roots by dismantling of brick work/PCC/RCC including necessary scaffolding any type any location/position i.e. Roof, parapet, wall, near pipes etc and applying concentrated hydrocholoric or sulphuric acid after removing roots for preventing the growth and making good disturbed portion using PCC (1:2:4) type B0 & 10mm thick plaster in ceement mortar (1:3), size of disturbed portion 150mm x 150mm x 200mm complete all as specified and directed.
M&L for applying two coat of oil emulsion distemper with roller over old decorated plaster surfaces of wall after preparation of surfaces complete all as specified and directed.
M&L for applying one coat of 100% Premium acrylic emulsion paint(using AIR-LESS PAINT SPRAYER) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces by using AIR-LESS PAINT PRIMER SPRAYER using smart technique including preparation of old surface of wall using manual sand papers(where reqd) of approved grade, washing down/cleaning the surface complete all as specified and as directed.
M&L for applying one coat of synthetic enamel paint (1st grade quality) after preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm in width or girth complete all as specified and directed.
M&L for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface.
M&L for two coats of smooth interior acrylic emulsion with Texture finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltrs(undiluted) /10 sq mtrs diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions complete all as specified and directed.
Taking down cement plaster of any description on brick or stone or concrete surface of wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar (1:6) on brick work or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick on fair face of brick works or concrete surfaces of walls with cement mortar (1:4) in two coats (10mm thick backing coat + 5mm thick plaster) mixed with WPC @200ml per 50 Kg of cement on 5mm thick plaster, finished the surfaces even and smooth without using extra cement complete all as specified and directed. (Note : WPC will be measured and paid separately under relevant item.)
M&L for rendering 5mm thick in cement mortar (1:3) on ceiling, chajja etc surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for applying one coats of oil emulsion distemper with roller after and preparation of old plastered surfaces of wall complete all as specified and directed.
Supply only integral water proofing compound liquid, ISI marked complete all as specified and directed.
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash complete all as specified and directed.
M&L for two coats cement base paint ovear a coat of alkali resistant primer including complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as directed .
M&L for preparation of old surfaces (plastered or unplastered) of ceiling and applying two coats of white wash on ceiling complete all as specified and directed.
M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as directed.
M&L for one coat of acrylic water based exterior grade primer @0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.
M&L for applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour, as per manufacturer's specification on new work using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in Particular Specifications of tender and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : Sanding of surface to be done by mechanical sander with 1500-2700 RPM, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application.
M&L for applying two coats of 100% Premium acrylic emulsion paint(using AIR-LESS PAINT SPRAYER) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces by using AIR-LESS PAINT PRIMER SPRAYER using smart technique including preparation/levelling of new surface of wall using manual sand papers(where reqd) of approved grade complete all as specified and as directed. Note : Primer and emulsion application to be carried out through airless spray machine (only mechanical application allowed except in paint application on bands/chajjas/building edges/borders/ projection etc where contrasting colour as specified and directed to be applied)
M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed.
M&L for two coats of smooth interior acrylic emulsion with rich matt finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltrs(undiluted) /10 sq mtrs diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions complete all as specified and directed.
M&L for applying two coats of oil emulsion distemper using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer including preparation of new plastered surfaces. Proper masking to be carried out before primer and paint application. Note : Sanding of surface to be done by mechanical sander with 1500-2700 RPM, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application. (Note for item No. 17.00 to 22.00 : The work pertaining to periodical services and water proofing shall be executed from authorised applicator of manufacturer of which the materials i.e. Paint distemper, putty etc is proposed to be used by the contractor and approved by Accepting Officer.
Taking down eaves gutter and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc and cleaning, refixing or removal to store complete all as specified and directed.
S&F of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with clamps complete all as specified and directed.
S&F of 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F of 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with clamps complete all as specified and directed.
S&F of 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.
M&L for writing letters or figures (block, roman, italic or Indian) not exceeding 30cm high after cleaning and preparation of existing surfaces complete all as specified and directed.
M&L for obliterating old writing of any description, not exc 0.1 sqm with paint to match existing works complete all as specified and directed.
BHASKAR SUPPLY AGENCY (BID ID -3325806)
MAZUMDER AND CO (BID ID -3338476)
TAMALIKA ENTERPRISE (BID ID -3324828)
SITALA COMMERCIAL AND CONSTRUCTION COMPANY (BID ID -3327133)
R N CHATTERJEE (BID ID -3332389)
M/S H.P Singha (BID ID -3323666)
K. K. CONSTRUCTION (BID ID -3329911)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .