Annual Plan-Thazhava GP S0 256/25- Maintenance of Mini Mast High Mast Light in Chittumula 19, Vattaparamp 18, Thriveni Junction58/25-Electrification of Mullasseril Community Hall in ward No. 18, Thazhava GP

Amount

Mini Mast Maintenance

OD318016/2024-2025:Supply and providing Single dial timer unit analog type with contactor and relay

2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

90.12.1.40:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 10 sq mm

OD318017/2024-2025:Supply, conveyance, installation, testing and commissioning of 150 Watts single piece LED Flood light fittings suitable for roadway installation with pressure diecast aluminium housing with corrosion resistance powder coating using Nano technology, natural cooling system,, Poly Carbonated UV treated diffuser for higher impact strength and optimum light transmision, High efficient driver with short circuit, over voltage, over courent and thermal protection, Surge protection up to 5 KV, PF 0.95, IP 65 protection, Horizontal Pole Mounting type fittings with all connected accessories fixing on the existing armand giving connections with 1.5 sq. mm 3 core PVC insulated and PVC sheathed copper conductor fles wire etc. as required The LED fittings shall be guaranted for 3 years from the date of commissioning from any defects in manufactring. Any of the spares / components which are found to be defective during this period shall be replaced immediately at free of cost. (Make: Philips/ Crompton/ Havells )

OD318018/2024-2025:Supply, conveyance, installation, testing and commissioning of 200 Watts single piece LED Flood light fittings suitable for roadway installation with pressure die-cast aluminium housing with corrosion resistance powder coating using Nano technology, natural cooling system,, Poly Carbonated UV treated diffuser for higher impact strength and optimum light trasmision, High efficient driver with short circuit, over voltage, over courent and thermal protection, Surge ptotection up to 5 KV, PF 0.95, IP 65 protection, Horizontal Pole Mounting type fittings with all connected accessories fixing on the existing armand giving connections with 1.5 sq. mm 3 core PVC insulated and PVC sheathed copper conductor fles wire etc. as required The LED fittings shall be guaranted for 3 years from the date of commissioning from any defects in manufactring. Any of the spares / components which are found to be defective during this period shall be replaced immediately at free of cost. (Make: Philips/ Crompton/ Havells )

90.6.5.19:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 2.50 sq mm

OD318020/2024-2025:Supply, conveyence, testing and commissioning of LED flood light drive in place damaged once suitabal for 200 watts flood light and giving connection

OD318019/2024-2025:Supply, conveyance, testing and commissioning of LED panel suitable for 200 W LED flood light

BIJUMON B (BID ID -2114419)

Bidder Name

S.K.LIGHTS

BIJUMON B