Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹4.3 L
EMD Value
₹10,650
Closing Date
10 Aug 2022, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Director
JNTBGRI PALODE KARIMANCODE P O
Construction of Bamboo craft centre
2022_KCSTE_491935_3
5/2022
Open Tender
Civil Works - Buildings
Item Rate
90 days
JNTBGRI, Palode, Trivandrum, India
Please refer Tender documents.
1 document required · 1 mandatory
₹560
Yes
₹10,650
Yes
12 Aug 2022
2 Aug 2022
12 Aug 2022
2 Aug 2022
10 Aug 2022
2 Aug 2022
2 Aug 2022 - 5 Aug 2022
Amount
Providing & laying in position cement concrete excluding the cost of centering and shuttering all works upto plinth level 1:4:8 with 40mm metal
Centering and shuttering including strutting etc and removal of form for foundations, footings, bases of column etc
Reinforced cement concrete work upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 with 20mm stone aggregate.
Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete.
Brickwork with common burnt clay bricks upto floor five level in cement mortar 1:6
12mm cement plastering of mix 1:4 including all cost of materials, labour charges etc complete
Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast Iron P or S’ trap, 10 litre low level white PVC flushing cistern , including flush pipe, manually controlled desire (handle lever) confirm to IS 7231with all fittings and fitness complete including cutting and making good the walls and floors wherever require. White vitreous China Orissa Pattern W.C pas of size 580 x 440 with integral type foot rests
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality & colour
Providing and fixing C.P brass long body bib code of approved quality confirms to is standards 15mm nominal bore.
Providing and fixing CP brass angle valve confirm to IS 8931 15MM nominal bore.
Providing and fixing unplasticised PVC connection pipe with brass unions 45cm length. 15mm normal bore.
Providing and fixing rigid PVC pipes confirm to IS : 13592, 110 mm diameter etc
Providing and laying 25mm rigid PVC pipe (6kg/cm2) of good quality including fittings etc. complete. (MR).
Providing and fixing factory made UPVC door frame made of UPVC extruded section having overall diamensions as below, with wall thickness 2mm corners of door frame to jointed with galvanized brackets and stainless screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanised M.S tube of size 19mm x 19mm and 1mm etc.
Providing & fixing to existing door frames 24mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24mm nd wall thickness 2mm (+_ 0.2mm ) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S galvanised / plastic brackets of size 75x220mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x209mm and 1mm +_ 0.1mm wall thickness. The lock rail made up of ‘H’ section, a UPVC hollow section of size 100 x 24mm and 2mm +_0.2mm wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S.’U’ cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620mm, having over all thickness of 20mm and 1mm +_0.1mm wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised M.S rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge, for W.C and bathroom door shutter.)
Providing and fixing 1st quality ceramic glazed wall tiles confirm to IS: 15622 (thickness to be specified by the manufacturer) of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer –in-Charge, in skirting , risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1cement :3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and laying ceramic glazed floor tiles of size 300 x 300mm of 1st quality confirm to IS:15622 of approved make, in colours such as white, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 including pointing the joints with white cement and matching pigment etc, complete.
stage.html
html • 0.01 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .