Renovation of Meeting Hall at Karewa Budgam in Dak Bunglow Budgam

Engagement of labours for clerance of permises of building

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : 6.1.1 Cement lime mortar 1:1:6 ( 1 cement : 1 lime putty : 6fine sand)Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level incl cost of all carriages involved

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G. S. sheet roofing including vertical/curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and in C.P brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required: 18.6.2 Range of two squatting plates with 5 liter P.V.C. automatic flushing cistern.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing 18.32.1 Circular shape 450 mm dia.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. 22.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) 22.3.1 With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2mm thick

12 mm thick cement plaster in 1:4 mix

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 Size of tile 600x600m m

) Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complet

) Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm

p/f of pvc panelling on walls of one side decorative lamination incl c/o ofadhesive cornice beeding and all fixtures upto site of work 8x8+15x12+8x5

Supply fixing installation of zebra vertical blinds incl all fittings and fixtures complete job 4x8x5

Supply /fixing installation craft decor Wooden Room Partitions, Room Divider Screen Separator and Room Dividers with Stand 2 Wall Panels compl job

Wiring for light point in 1.5 sq.mm FRLS PVC insulated copper conductor single core cable of Polycab /Finolex /Havells /Anchor /Salzer make in surface / recessed medium class PVC conduit (25 mm dia PVC Conduits including cutting of walls /floors with hydraulic cutters and refacing to original position by way of cement plastering /pop / paiting etc complete job ) , with 6Amps modular switch, modular plate , suitable GI box and earthing the point with 1.5 s q.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( P+N+E for Normal and invertor points per room is to be provided seperately). The job includes providing and fixing of 6 Amps S.Pole MCB to be housed in DB Box including cost of MCB DB BoX. The job further includes providing and fixing of 12-15 Watts LED Down lighting fixture (commercial type) having aluminium body of standard make dully isi marked ,including GI Lighting deep to be recessed in slab complete job .

Supply fixing installation of , Hanging Light for office table, Pull-Down Feature for H Adjustable Ceiling Lights for Indoor

suply installation fixing of LED Sqaure 100x100 lamps incl complete commisioning incl switch 3 pin socket if any

P/F PVC Pipe and fittings of Prince or other approved brand (type-B) incl cost of labour charges for cutting of wall/floor incl laying in proper gradient and fixing in position complete job

75 mm dia pipe

100 mm dia pipe

Finishing walls with textured exterior paint of required shade: 13.118.1 Old work (two or more coats on existing cement paint surface applied @ 3.28 ltr/10sqm) 40x2.75

P/F of AC 4 floor panelling HDF with all fittings cornice foam etc complete job

P/F of name plates of arcylic brand of standard size including all fittings and fixture

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.

PN-16 pipe , 20mm OD(SDR-7.4)

PN-16 pipe , 25mm OD(SDR-7.4)

Dry random rubble masonery with hard stone in foundation and plinth includicng all carriages without bond stone

Supply Installation of 1.5 Tone AC with transformer of required capacity incld. All fitting charges etc.

Providing and fixing in wall lining of specified medium density board, pre-laminated one side decorative lamination other side balancing lamination Grade I, exterior grade, with necessary fixing arrangement and screws etc. complete. (12MM MDF) incl p/l fixing of diffrent type of decorative beedings and cornice to be fixed on profile work on MDF board in patern and design strictly as per direction of EIC incl p/a of arctlic putty wall mat finish with DEECO paint two or more coats to give an even shade vincl c/o all frame work pvc pipes conduits involved

P/F of PVC conduit in b/w with proper design embedded in walls with standard size boxes for wiring includicng all fittings complete job

Supplying and installation of 1 HP Water Mortor including all fitting and fixtures complete job

P/f of decorative wall paper incl c/o adhesive and fixing charges water resistant brand