Annual Plan-Malappuram District Panchayath Completion works for Thavanur KMGVHSS Drinking water project Providing motor pump set and Electrification-S1336/26 -General Electrical Work(Retender)

wiring

OD223596/2025-2026: Supply, conveyance installation testing and commissioning of 6 HP Vertical open well submersible motor pump set 2880 rpm at rated voltage 3 phase 350/415V 50HZ AC supply at 63 - 93 Mts head of model 6DVM 6 HP 5 stage 250 LPM at 72 Mtrs Deccan Ekki pumps/ CVH 6/5 6 HP 5stage 25 90 head range CRI make 3P D0L VOS SSI 50mm delivery size 50 mm or nearest size using leak proof materials as pipe connected one by one to the motor up to the bottom of the well using leak proof materials as pipe connected one by one to the motor up to the bottom of the well usingleak proof materials as required with necessary supports on both sides of the motor including giving connection as per the direction at site.th sides of the motor including giving connection as per the direction at site.

90.6.6.4:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.6 sq mm

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

90.14.24.2:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.2 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Capacitor, Cylinderical Type, suitable for direct connection to motors.

OD218437/2025-2026:S & F Motor starters of the following ratings Submersible pump controllers with single phase and low voltage preventer for three phase 5 to 10 HP submersible motor pumps (DOL) and giving connections etc as required L&T make

OD218434/2025-2026:supply and fixing Digital Multifunction meter to read: V, A, F, PF-3 phase accuracy class 1 LED

OD223634/2025-2026:Supply and providing 200/5 A, 5 VA, accuracy class 1, Resin Cast Metering CT

OD218436/2025-2026:Supply and fixing Danger notice board of size, 125 x 75 mm

OD218430/2025-2026: Supply and providing 50 mm or nearest size stainless steel Hose Collar with hose clip

OD218435/2025-2026:Supply and fixing flat iron clamps made from 2 nos. 50x6 mm flat iron clamp of 50 mm with suitable size bolt and nut for fixing delivery pipe on the top of the well as required

OD218427/2025-2026:Supply and providing 50 mm or nearest size dia Flange set

OD218428/2025-2026:Supply and providing 50 mm or nearest size dia Full way valve (ISI)

OD218429/2025-2026: Supply and providing 50 mm or nearest size dia Gun Metal Non return valve (ISI)

OD223923/2025-2026:Supply and laying 20 mm or nearest size nylon rope

90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm

90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

OD223659/2025-2026:Supply, laying and clamping of DWC pipe 50/38 mm or nearest size etc as required at site

OD218442/2025-2026:Supply, threading ,laying and jointing of the 50 mm heavy duty B class GI pipe with all required accessories as delvery pipe etc as required

1.21.5:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.50 mm

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD218441/2025-2026:Supply, providing and fixing 2 X 25 mm X 3 mm G.I. strip test joint for earthing system

OD218438/2025-2026:Supplying and Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD218440/2025-2026:Supply and providing 25x6mm brass nut and bolt etc. as required.

1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm

1.17.24:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 4 sq. mm

1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

OD223839/2025-2026:Supplying and fixing FP sheet steel enclosure on surface/ recess along with 63 amps 415 volts curve TNP MCB complete with connections, testing and commissioning etc. as required at site.

Please Enable Macros to View BoQ information