Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.8 LAccepted-AOC BLDG NO XI 74 NEAR VALLARAM KULLANGARA TEMPLE KUNHIMANGALAM KOVVAPPURAM PO KANNUR DIST KERALA 670309 | KANNUR | KERALA | 670309 | L1 | Accepted-AOC Accepted contract, being lowest. | |
| 2 | L2₹15.2 L+₹32,615 (2.19%)Rejected-AOC | L2 | Rejected-AOC Rejected, not being lowest | |
| 3 | L3₹17.1 L+₹2.2 L (14.9%)Rejected-AOC AMBADIL NEAR PAACHAKKIL BUS STOP MALAPARAMBA POST KOZHIKODE DISTRICT KERALA 673 009 | KOZHIKODE | KOZHIKODE | KERALA | 673009 | L3 | Rejected-AOC Rejected, not being lowest | |
| 4 | L4₹18.1 L+₹3.2 L (21.2%)Rejected-AOC RP IV 23 PUNNAKADAVU JN RAMANTHALI P O KANNUR 670308 | KANNUR | KANNUR | KERALA | 670308 | L4 | Rejected-AOC Rejected, not being lowest |
| Sl No | Description | Qty | Unit | SANDR L4 | RS ENTERPRISES L1 | NRI BUILDERS AND MATERIAL SUPPLIERS L2 | EXCEL ENGINEERING L3 |
|---|---|---|---|---|---|---|---|
| 1.00Notes: 1.Contractor need to purchase minimum 50% of all items (other than paints) mentioned in this CA within 20 days of getting sample approval and kept in custody so that no delay in work due to non avilability of materails is occured. Contractor should ensure during the course of work that he has minimum 25% of materials with him till the completion. 2.Rate quoted for demolition/dismantling/ taking down is inclusive of removing the same from site and dumping locations anywhere outside INA Ezhimala. 3.In any painting works, contractor need to work by putting proper covering on floors and furniture items before painting of clean the area and remove the drop marks from floors. Otherwise,a recovery of Rs. 10.00 per sqm in internal paintings and Rs 5.00 per sqm for external paintings will be made from contractor. Any paint drops /marks already present should be shown to Engg In Charge prior to starting the work. 4. Contractor should maintain seperate registers for plumbing and carpenter repair works. Day today complaints should be noted in those registers with Sl nos of complaints, location, qty of work, status of complaints and signature of Incharge and stamp of the Office. Format will be given from AGE B/R 1 Office. Contractor should obtain the signature of incharge on the same day of work. These registers to be submitted to JE(Civil) on every weekend without fail. 5. Contractor need to understand that this contract is to do works in break period and should employ maximum number of labour to finish the entire work within the stipulated period. 6. Contractor need to bring full qty of paints as per CA in one time and should number them with permanent markers. The same empty buckets of paints should be kept in safe custody and should show to Engg In Charge at the time of preparation of bills as well as for accounting purpose. | |||||||
| 2.00 | Material and labour for preparation of old decorated surfaces and applying one coat of acrylic emulsion (interior grade) on wall including necessary scaffoldings all as specified and as per manufacturers instructions and as directed. | 8,170 | Sqm | 55 ₹4,49,350 | 40 ₹3,26,800 Lowest | 40 ₹3,26,800 Lowest | 55 ₹4,49,350 |
| 3.00 | Material and labour for preparation of old decorated surfaces and applying one coat of acrylic emulsion (interior grade) on ceiling including necessary scaffoldings all as specified and as per manufacturers instructions. | 3,000 | Sqm | 58 ₹1,74,000 | 35 ₹1,05,000 Lowest | 40 ₹1,20,000 | 60 ₹1,80,000 |
| 4.00 | Material and labour for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | 3,025 | Sqm | 70 ₹2,11,750 | 55 ₹1,66,375 | 50 ₹1,51,250 Lowest | 60 ₹1,81,500 |
| 5.00 | Material and labour for preparation of old wooden surfaces of any description and applying one coat of synthetic varnish/french polish complete all as specified and as directed. | 2,000 | Sqm | 74 ₹1,48,000 | 50 ₹1,00,000 Lowest | 50 ₹1,00,000 Lowest | 62 ₹1,24,000 |
| 6.00 | Material and labour for one coat of synthetic enamel paint on wall of any description match with existing colour including preparation of old surfaces complete all as specified and directed. | 3,000 | Sqm | 58 ₹1,74,000 | 55 ₹1,65,000 | 50 ₹1,50,000 Lowest | 60 ₹1,80,000 |
| 7.00 | Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each and refixing the same after carrying out repairs including providing new necessary aluminium / MS rods as extra stiffening members for doors and refixing in same position complete all as specified and as directed. | 20 | Each Leaf | 200 ₹4,000 Lowest | 390 ₹7,800 | 300 ₹6,000 | 250 ₹5,000 |
| 8.00 | Taking down chowkats or frames any description and size but without taking off shutters from the frames exc 1.5 sqm each complete all as specified and as directed. | 3 | Each | 150 ₹450 | 400 ₹1,200 | 300 ₹900 | 125 ₹375 Lowest |
| 9.00 | Taking down shutters of any description and any material exc 1 sqm but n.exc 2 Sqm complete all as specified and as directed. | 3 | Each | 250 ₹750 | 350 ₹1,050 | 200 ₹600 Lowest | 200 ₹600 Lowest |
| 10.00 | Supply and fix powder coated aluminium sections for frame and shutters of doors, windows, ventilators, partitions etc with one or more rebates including necessary neoprene packing etc complete all as specified and as directed.
Note:- Minimum thickness of powder coating not less than 50 Micron | 60 | Kg | 575 ₹34,500 Lowest | 650 ₹39,000 | 650 ₹39,000 | 650 ₹39,000 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
1 Nov 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(MAINT)EZHIMALA
GARRISON ENGINEER (MAINT) MILITARY ENGINEER SERVICES INDIAN NAVAL ACADEMY POST KANNUR DIST KERALA 670 310
AS PER BOQ AND TENDER DOCUMENTS
2025_MES_734606_1
GE MAINT EZHIMALA 8785
Open Tender
Civil Works
Item Rate
90 days
Ezhimala
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MAINT EZHIMALA
₹40,000
Yes
4 Dec 2025
10 Oct 2025
7 Nov 2025
10 Oct 2025
1 Nov 2025
25 Oct 2025
10 Oct 2025 - 17 Oct 2025
Amount
Notes: 1.Contractor need to purchase minimum 50% of all items (other than paints) mentioned in this CA within 20 days of getting sample approval and kept in custody so that no delay in work due to non avilability of materails is occured. Contractor should ensure during the course of work that he has minimum 25% of materials with him till the completion. 2.Rate quoted for demolition/dismantling/ taking down is inclusive of removing the same from site and dumping locations anywhere outside INA Ezhimala. 3.In any painting works, contractor need to work by putting proper covering on floors and furniture items before painting of clean the area and remove the drop marks from floors. Otherwise,a recovery of Rs. 10.00 per sqm in internal paintings and Rs 5.00 per sqm for external paintings will be made from contractor. Any paint drops /marks already present should be shown to Engg In Charge prior to starting the work. 4. Contractor should maintain seperate registers for plumbing and carpenter repair works. Day today complaints should be noted in those registers with Sl nos of complaints, location, qty of work, status of complaints and signature of Incharge and stamp of the Office. Format will be given from AGE B/R 1 Office. Contractor should obtain the signature of incharge on the same day of work. These registers to be submitted to JE(Civil) on every weekend without fail. 5. Contractor need to understand that this contract is to do works in break period and should employ maximum number of labour to finish the entire work within the stipulated period. 6. Contractor need to bring full qty of paints as per CA in one time and should number them with permanent markers. The same empty buckets of paints should be kept in safe custody and should show to Engg In Charge at the time of preparation of bills as well as for accounting purpose.
Material and labour for preparation of old decorated surfaces and applying one coat of acrylic emulsion (interior grade) on wall including necessary scaffoldings all as specified and as per manufacturers instructions and as directed.
Material and labour for preparation of old decorated surfaces and applying one coat of acrylic emulsion (interior grade) on ceiling including necessary scaffoldings all as specified and as per manufacturers instructions.
Material and labour for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for preparation of old wooden surfaces of any description and applying one coat of synthetic varnish/french polish complete all as specified and as directed.
Material and labour for one coat of synthetic enamel paint on wall of any description match with existing colour including preparation of old surfaces complete all as specified and directed.
Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each and refixing the same after carrying out repairs including providing new necessary aluminium / MS rods as extra stiffening members for doors and refixing in same position complete all as specified and as directed.
Taking down chowkats or frames any description and size but without taking off shutters from the frames exc 1.5 sqm each complete all as specified and as directed.
Taking down shutters of any description and any material exc 1 sqm but n.exc 2 Sqm complete all as specified and as directed.
Supply and fix powder coated aluminium sections for frame and shutters of doors, windows, ventilators, partitions etc with one or more rebates including necessary neoprene packing etc complete all as specified and as directed. Note:- Minimum thickness of powder coating not less than 50 Micron
Supply and fix in repairs Aluminium Composite Panel 4mm thick of approved colour and shade fixed to wooden / aluminium frame work as in door/cupboard shutters all as specified
Supply and fix 150mm anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed.
Supply and fix 150mm extruded aluminium anodised alloy handles fabricated type complete all as specified and as directed.
Supply and fix 100mm stainless steel butt hinges, cold rolled medium weight all as specified and directed
Supply and fix 150mm stainless steel butt hinges, cold rolled medium weight all as specified and directed
Supply and fix 300mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.
Supply and fix mortice lock 100 mm to 150mm long matching with the existing doors and locks 4 lever vertical type complete all as specified and as directed.
Supply and fix in repairs 75 mm anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed.
Supply and fix in repairs 100 mm anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed.
Supply and fix in repairs 150mm anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed.
Supply and fix in repairs100 mm extruded aluminium anodised alloy handles fabricated type complete all as specified and as directed.
Supply and fix in repairs 150mm extruded aluminium anodised alloy handles fabricated type complete all as specified and as directed.
Supply and fix in repairs 75 mm stainless steel butt hinges, cold rolled medium weight all as specified and directed
Supply and fix in repairs 100 mm stainless steel butt hinges, cold rolled medium weight all as specified and directed
Supply and fix in repairs aluminium powder coated Ebco handles 100 to 150 mm, suitable for locking windows / ventilators all as specified.
Supply and fix in repairs 250 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.
Supply and fix in repairs 300mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.
Supply and fix in repairs mortice lock 100 mm to 150 mm long suitable for existing Aluminium doors matching with the existing lock and door 4 lever vertical type complete all as specified and as directed.
Supply and fix in repairs aluminum anodized tubular towel rail 20mm dia including brackets complete all as specified.
Supply and fix in repairs floor door stopper 150mm size aluminium alloy body and tongue double legged, anodised fixed to door complete all as specified and as directed.
Supply and fix in repairs aluminum (die cast) body door closer hydraulically regulated designation No 2 universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg all as specified
Supply and fix in repairs aluminium hasp and staple 75 mm aluminium anodised and fixed with screws complete all as specified and as directed.
Supply and fix in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.
Supply and fix in repairs aluminium expanded metal mesh 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum staples or beading complete.Rate of taking down and refixing of shutters of any description for repair of mesh will be included in quoted rate complete all as specified and as directed.
Supply and fix in repairs SS 304 friction stay of 400 mm long suitable for window/ventilator shutters all as directed including taking down and refixing of shutter for fixing of friction stay complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden / aluminum frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
Material and labour 4.8 mm thick sheet glass ordinary quality any size in each pane and glazing with aluminium beading complete all as specified.
Material and labour plywood 18 mm thick, grade BWP, type BB, having one side decorative teak veneer fixed with screws to timber frame work,in repairs of draws and parts of fixed buildin furniture complete all as specified and directed including taking down of old plywood.
Material and labour plywood 12 mm thick, grade BWP, type BB, fixed with screws to timber frame work and repair to drawers complete all as specified and directed including taking down of old plywood.
Material and labour for 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions including taking down of old laminate complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified.
Material and labour for vitrified Ceramic light shade tiles 10mm thick ( square / rectangular ), polished, area of each tiles exceeding 0.36 Sqm, n.exc 1 sqm in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed bed in CM 1:6/ approved tile adhesive all as specified.Width of tile joints should be 4 mm and the same shall be filled with approved epoxy grout.
Material and labour for vitrified ceramic tiles 10mm thick (square/rectangular), light shade polished, area of each tiles exc 0.36 sqm and not exc. exceeding 1 sqm, in skirting/dado etc. set and jointed in neat cement slurry including 15 mm thick backing coat plaster in CM (1:4) / approved tile adhesive complete as specified and directed.(work shall be carried out in patches).Width of tile joints should be 4 mm and the same shall be filled with approved epoxy grout.
Supply and fix in repairs 400 to 500 mm long telescopic channel SS 304 fixed on existing cupboard drawers including taking down of old one complete all as specified and as directed. Make Ebco/ Hettich/Sleek.
Supply and fix in repairs water closet pedestal pattern white colour including seat cover, fixing bolts , connection to flush tank, connection to trap etc complete all as specified and as directed.
Supply and fix in repairs vetreous china half stall urinal complete all as specified and as directed.
Supply and fix in repairs vitreous China Urinal partition white of size 310x700 mm complete all as specified and as directed.
Supply and fix pillar taps in repairs 15 mm size, brass chromium plated swan neck type screwed down high pressure screwed for iron pipe & fixed complete all as specified and as directed. Make Jaquar Model No CON-CHR-167KNB or Equivalent models in Parryware, Hindware,Cera etc.
Supply and fix n repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.
Supply and fix in repairs Bib tap 15 mm size, brass chromium plated rust proof complete all as specified and as directed. Make Jaquar Model No COS - 103037 or Equivalent models in Parryware, Hindware,Cera etc.
Supply and fix in repairs 15 mm dia Angular stop valve, Brass chromium plated complete all as specified and as directed. Make :- Jaquar Model No FLR - CHR-5053 N or Equivalent models in Parryware, Hindware,Cera etc.
Supply and fix in repairs Brass CP wall mixer 15 mm dia bore for mixing hot and cold water screwed down for iron pipe and fixed all as specified and directed by Engineer-in-charge complete Make Jaquar Model No FLR-CHR-5281N or Equivalent models in Parryware, Hindware,Cera etc.
Supply and fix in repairs Urinal spreader of brass chromium plated fancy type suitable for 15 mm bore pipe complete all as specified and as directed., Make Cera Model No F8070201 or Equivalent models in Parryware, Hindware,Cera etc.
Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
Supply and fix in repairs Tubular towel rail 20mm dia brass chromium plated including brackets complete all as specified and as directed.
Supply and fix in repairs Chromium plated towel ring round with round flange complete all as specified and as directed. Make Jaquar Model No ACN-CHR-1121 BN or equivalent models in Parryware, Hindware,Cera etc.
Supply and fix in repairs stainless steel soap dish of approved pattern all as specified and as directed Make Jaquar AKP-CHR-35731P or Hindware or equivalent models in Parryware, Hindware,Cera etc.
Supply and fix in repairs Chromium plated health faucets (hand held shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with adequate length and wall mounted pedestal for hanging the faucet etc complete all as specified and as directed. Make Jaguar model No ALD CHR 565 or equivalent
Supply and fix in repairs CP brass toilet paper holder complete all as specified and as directed.
Supply and fix in repairs CP Brass Shower rose with arm complete all as specified and as directed.
NRI BUILDERS AND MATERIAL SUPPLIERS (BID ID -3473885)
EXCEL ENGINEERING (BID ID -3473841)
SANDR (BID ID -3469010)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.55 MB
BOQ_822572.xls
BOQ • 0.30 MB
Tender.pdf
Tender Documents • 1.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .